When I try to watch a video that's encrypted I Get this message
Quote:
The stream is encrypted and decryption is not supported.
What do I need to install to fix this in mplayer? Or can another video player solve this?
1. Can I download/use 'Spotify' on Ubuntu as i had an account on my old XP PC? If so how.
2. Some songs that I was able to play on XP don't seem to work on Ubutnu. My downloaded songs do work, however, songs that were burnt via Windows Media player from CD don't. The error message is "The stream is encrypted and decryption is not supported".
3. I have all my songs on an external hard drive connected to my Ubuntu PC. I've heard about Ubuntu one. Does this mean I could move all my songs onto this Ubuntu one account and then be able to access/play these songs from a XP PC upstairs?
I ticked the box for this when I installed Lucid, but how can I verify that it's actually performing the encryption/decryption?
View 4 Replies View RelatedI just installed say with
Code:
sudo apt-get install epos
and everything went fine, until I tried to use it.
When i do
Code:
say hello
it gives me
Quote:
he~lo######~T
Could not open localsound device, error 2 Client side error: Could not set up a stream
I have been recording some demos from games like Quake 3, 4, and Doom 3. Now, I've been able to use Quake Video Maker in the past to take the Targa frames that the games export, and then combine those into a movie. However, it seems this time that QVM is spitting out some bad files. I try to watch the AVI file, but I just get this error message:
** Message: Error: Could not demultiplex stream.
gstavidemux.c(3526): gst_avi_demux_stream_header_pull (): /GstPlayBin2lay/GstURIDecodeBin:uridecodebin0/GstDecodeBin2:decodebin20/GstAviDemux:avidemux0:
pull_range flow reading header: unexpected
I figured that if I import it into Kino, then I should be able to edit just fine. Except, when I import it into Kino, the video just hangs on the first frame for the first half, and then plays the whole video at double the speed.Is there a better package that will take a lot of image files and export them into a movie file? Preferably one where I don't have to add each frame manually, as the demo I'm working with now has 5000+ frames.
We are able to stream the video fine from while the flv file is located in the /var/videos/flv folder. We have a second volume that we formatted and mounted as /media/data/videos/flv. We have changed the path in the lighttpd config file to match this. When we play the video we are receiving:200, Stream not found, NetStream.Play.StreamNotFound, clip" "[Clip]"/media/data/videos/flv/test.flv".
View 1 Replies View RelatedI was trying to convert a flac audio to mp3 using soundconverter & its failing with the error:
Quote:
GStreamer error: Gstreamer encountered a general stream error.
I should note that the flac is a rip of an actual Mono Vinyl disc. Am not exactly sure how that was done but I was interested in converting some those files to ogg & mp3. OGG conversion doesn't give any error.
Below is the result when launching soundconverter from the terminal & trying to convert the flac file(s) to mp3 (i just tried ogg to mp3 & the same error occurs):
Code:
$ soundconverter
SoundConverter 1.4.4
using Gstreamer version: 0.10.28, Python binding version: 0.10.18
using gio
[Code].....
I get the following error when I try to play my local radio station via firefox with Kubuntu 9.10:
Firefox doesn't know how to open this address, because the protocol (mms) isn't associated with any program.
I have Flash, and the Gecko Media Player plugins installed.
how i can get this to work? Im working third shift and its so silent it is deafening, i could use a hero
I have sucessfully installed ubuntu 11.04 (32-bit).. When rebooting system my monitor says VGA mode not supported ? how can i get out of this?
View 5 Replies View RelatedThis was my problem for installing: [URL]. Now I downloaded ubuntu server edition, and typed sudo apt-get install kubuntu-desktop, so it did. Now I am starting my PC up, and I can't get past "waiting mouse" image and the background of the splash screen. I am on this error for a week or so already!
View 9 Replies View RelatedI have made numerous audio CD's with Brasero, but recently I had to make one and mid way through the burning process I am given this error: Could not decode stream. Or some variation like that. It ruins the cd and after I get the error I can not eject the disc.
View 1 Replies View RelatedI've been trying to get soundconverter to work on ubuntu 10.10, I've checked I've got all the restricted packages installed, gone into synaptic and installed a bunch of gstreamer stuff, downloaded and compiled the latest version of soundconverter but whatever I do, the following happens:
1. open soundconverter
2. open file (wav)
3. set to convert to mp3 (default)
4. Click convert and instantly get the ever so helpful "general stream error" message!
I just got Ubuntu 9.10 CD from the Canonical Ltd. I started to Install Ubuntu 9.10.
It asked me to Select a language then it started loading
After a minute or two the screen showed some errors and my monitor showed an error non-supported refresh rates 35.xx KHz / 75.x Hz
I dont remember the exact numbers but this is the error. This error is generated by monitor's hardware not ubuntu.
I'm having a problem accessing a network share in windows 7 from Ubuntu 9.10. I can access this share from a Vista computer on the network, but not from Ubuntu. Windows 7 can also connect fine to my Ubuntu Samba shares. I get the following error when trying to connect with SMBclient.
Code:
smbclient -L KRONOS
Domain=[KRONOS] OS=[Windows 7 Ultimate 7600] Server=[Windows 7 Ultimate 6.1]
Sharename Type Comment
--------- ---- -------
Error returning browse list: NT_STATUS_NOT_SUPPORTED
Domain=[KRONOS] OS=[Windows 7 Ultimate 7600] Server=[Windows 7 Ultimate 6.1]
Server Comment
--------- -------
Workgroup Master
--------- -------
I have a problem with acl's in Ubuntu Server 10.04. When i write in a terminal the command setfacl, the machine returns error: setfactl /home/xxxx: operation not supported.
View 1 Replies View RelatedI recently tried to upgrade from Ubuntu 10.10 to 11.04. At first, the installation seemed to go smoothly, but when I tried to boot up, my screen displayed the following error message:
Input Not Supported
I am unsure how this is happening, since I was able to install 10.10 successfully. To better assist, I am attaching detailed information about my computer system.
I have my home partition encrypted and would like to take the decryption out of the system. Such as when booting the PC it would say it can't find the keys so stop and wait for me to put my usb drive in to continue (reboot and try again). Is there some way to get something like this set up?
View 2 Replies View Relatedi'm having issues with my code (i'm kinda new to java).I'm trying to convert a c++ code snippet to java in order to use it in my application.Here's the C++ code
Code:
#ifndef _ENCRYPTOR_H_
#define _ENCRYPTOR_H_
[code]....
Ubuntu 9.04 server (64bit)
8GB
(2) 320 WD HDD - RAID 1
After coming home one evening I found my server was turned off. My suspicions lead me to believe we had a storm and the power went off, then the UPS went off and finally at that point the server went off too. I think my server was set to allow security updates. After it turned of and restarted it seems it made a change to Grub and upgraded it to Grub2. In doing so I now get the following message:
Error 13: Invalid or un supported executable format
I have tried to do the following:
url
This solved the problem for me, from > url
Quote:boot from the live medium and chroot into the Linux installation:
$ sudo mkdir /mnt/linux
$ sudo mount -t ext4 /dev/sda1 /mnt/linux
code....
Then, the following command should resolve the issue. :
$ sudo grub-install --recheck /dev/sda
Installed new drive in notebook, connected old one with SATA/USB cable, both are encrypted disks. It detected the old drive and prompted for password in Gnome, after entering correct decrypt password, this error appeared:
Error unlocking device: cryptsetup exited with exit code 239: Device udisks-luks-uuid-4de9c864-c678-4633-4343-uid1000 already exists.
I am receiving the following error when trying to enable Compositing in Desktop Settings for KDE4 in openSuse 11.3-Xen
Code:
Error: Compositing is not supported on your system. Required X extensions (XComposite and XDamage) are not available. I want to have desktop effects enabled but can't seem to figure out how to get this done. "Advanced" Tab is greyed out. "Enable desktop effects" is greyed out.
[Code]...
This worked to get X up and running in the Xen kernel. However, I'm pulling what hair I have left trying to figure out how to enable compositing in Xen. The entire motivation for my upgrade was this one feature (amongst some other things).
Please show me where I'm going wrong. I hope this is not a "live with it" type of scenario due to my using Xen.
How to decrypt a file in openssl which is encrypted in perl using crypt cbc
View 2 Replies View RelatedI think this might go for gaming, but maybe a general graphics problem could be taken into consideration for anything else that might display this error:
Code: fixme:d3d:state_wrap (WINED3DRS_WRAP0) Texture wrapping not yet supported. That was spammed in my terminal after I logged into my character. This was spamming itself before logging into my character:
Code:
err:d3d_surface:surface_allocate_surface >>>>>>>>>>>>>>>>> GL_INVALID_VALUE (0x501) from glTexImage2D @ surface.c / 862
err:d3d_surface:surface_allocate_surface >>>>>>>>>>>>>>>>> GL_INVALID_VALUE (0x501) from glTexImage2D @ surface.c / 862
[Code]...
Just to let you all know, I'm not all that advanced in Ubuntu or Linux knowledge, this game is just the only thing keeping me from going completely Ubuntu. I only have Windows installed to play this game, and I've gotten as far as to get this game playing this far,
I will try to keep this straight-forward. Yesterday I was able to access an ubuntu 10.10 (edubuntu) desktop using the tightVNC viewer that I installed on my Vista laptop. I never set anything up on the desktop it just worked and I didn't question it.
Today I get the following error on the viewer software: "Server did not offer supported security type" The only thing that has changed was that I installed a bunch of updates yesterday afternoon, but I am not sure what changed.
Error 18 - Selected cylinder exceeds maximum supported by BIOS
I am running Jaunty Jackalope on a new machine and after a recent update I got the following message when trying to reboot:
Error 18 - Selected cylinder exceeds maximum supported by BIOS
After reading some of the info on Grub error 18 I decided to create a separate boot partition, as suggested. However, when trying to use Gparted from the live CD to create some space ahead of /sda1, Gparted would run for a while and then crash. The crash message says:
"e2fsck crashed with SIGSEGV in qsort" So now I am stuck, unable to boot from HDD and unable to create new partitions (the other partitions on the disk work fine with Gparted). Could all of this be due to corrupt /sda1 partition?
ibv4l2: error turning on stream: No space left on device
Webcam work in:
fps: 1/30
formate:JPEG/WMV
it works not perfect on guvcview
akonadi shows errors (self test) on every startup (on different setups and with different errors) that's very annoying, everything seems to work though, so i just want to get rid of that stupid message (why should an average user of kontact solve mysql problems?). decryption of mails is not working, because of a "wrong passphrase" (says so in the mail body). I was never prompted for a passphrase and kgpg decrypts the msg.asc fine, so its a kmail problem!? the spam / ham buttons are invisible. i added them to the toolbar with no effect (meaning, they are still invisible). Removing of other buttons works.
View 1 Replies View RelatedI had setup an encrypted home directory on my computer, following all the instructions. However, after one reboot, ecryptfs told me "ERROR: Encrypted directory not setup properly." So I rebooted into an Ubuntu Live CD and ran ecryptfs-recover-private. It found my encrypted dir and asked for my login passphrase. I entered it and it told me, "ERROR: The key required to access this private data is not available." Is there any brute force way to recover the key?
View 4 Replies View RelatedI have downloaded Fedora 11 x64, and I went to the adobe website and downloaded the tar.gz file for flash player. I went into the terminal to untar the file and after I did that I tried to install it and got this error :
ERROR: Your architecture, 'x86_64', is not supported by the Adobe Flash Player installer. What does this mean? My dad could get his to install but his is 32 bit.Do I have to wait until the full version is out?
I have a very strange problem in a C++ RHEL4 app. Here is the code: socket(PF_INET, SOCK_STREAM, 0) returns errno 97 socket(PF_INET, SOCK_DGRAM, 0) returns successow that is strange or what?additional info:1. Extracting the above code into a test program, both return success.2. Placing the above code into the 1st line of my app, error as above.3. I ran app and test program in the same terminal window.4. My app links in many static libraries 5. My app runs fine when compiled and linked on RHEL56. My APP is a ss7 endpoint (SIP <==> SS7 message flow)7. I verified PF_INET, SOCK_STREAM, SOCK_SGRAM values are correct.
View 2 Replies View Related