Ubuntu :: Error - VGA Mode Not Supported
Jul 19, 2011I have sucessfully installed ubuntu 11.04 (32-bit).. When rebooting system my monitor says VGA mode not supported ? how can i get out of this?
View 5 Replies
ADVERTISEMENT
OpenSUSE Hardware :: Error - Kernel: [time] Sisfb: Mode 'none' Not Supported Anymore. Using Default
Aug 7, 2010I have just upgraded to 11.3 and work in icewm (I have kde apps installed but no other desktops). When I boot up the computer it gives me this console error message:
Code:
kernel: [time] sisfb: Mode 'none' not supported anymore. Using default.
kernel: [time] sisfb: Fatal error: Unable to reserve 16MB framebuffer memory
kernel: [time] sisfb: Is there another framebuffer driver active?
Apart from that I'm not exactly sure what the problem is. The computer isn't displaying immediate symptoms to me. I checked the hardware sticky and when I have a few hours I can work through
HTML Code:
http://en.opensuse.org/SDB:Configuring_graphics_cards but I don't have that kind of time at the moment, so I wanted to check that that was the route I should be going down before I did. I googled this stuff but everything seems to start from a knowledge base above mine and leaves me clueless.
Ubuntu :: Video Mode Not Supported ?
Aug 7, 2010I have windows 7 64 bits and i'm trying to install ubuntu 10.04 amd64. The installation was good but when i'm trying to boot on ubuntu i have a black screen with a message "mode not supported".
I've looked for the problem on google. The solution is to change the frequency of the monitor. Mine supports only 75htz max and on the error message I have 77htz, what's why it's not supported.
The problem that to change the frequency for lunux i have to be logged in linux in order to type commands in the terminal.
But I can't see a thing, only the message about the mode not supported, so I can't type anything.
I found some solutions here but i can't do what they ask, because I can't boot and the message doesn't disappear. [url]
Ubuntu :: Video Mode Not Supported / Get It To Work?
May 28, 2010Tried to install the ATI proprietary drivers (fglrx), but when I boot up, all I get is "Video Mode Not Supported". I suspect my refresh rate or resolution is the problem, but I don't know how to change it from the terminal (ctrl-alt-f1)
View 9 Replies View RelatedDebian :: Console Display Mode Not Supported?
Feb 26, 2011I've just tried to install X on my new debian system which had a nasty side effect.
I can see the bootcycle up to "Waiting for /dev to be fully populated." and then the screen switches into a display mode unsupported by my display. I've had problems like this many times before because the display returns it's capabable of resolutions like 2048x1536, which it just isnt. I've had to disable autodetection whenever using this display. One thing to note thought is that it's NOT X that's messing up the display. It's setting the wrong display mode even before the filesystems are mounted. And I've already uninstalled X with no change either. Also recovery(single user) mode has no proper display output either.
what is setting my display to the wrong mode?
General :: Code Model 'kernel' Not Supported In The 32 Bit Mode?
Mar 31, 2011An error occured when I install my r8101 dirver. I have got the message:
/home/driver/r8101/src/r8101_n.c:1: error: code model 'kernel' not supported in the 32 bit mode
/home/driver/r8101/src/r8101_n.c:1: sorry, unimplemented: 64-bit mode not compiled in
make[3]: *** [/home/driver/r8101/src/r8101_n.o] Error 1
[Code]......
OpenSUSE Network :: Wifi Master Mode Not Supported Using Yast?
Jun 2, 2010after trying several pci and usb network cards none were able to have their ssid broadcasted. The question that i have is: Can a suse box be converted to act as an acces point without the use of atheros based hardware, without switching over to ubuntu and or debian, without the use of openwrt?
View 4 Replies View RelatedDebian Configuration :: Video Mode Not Supported. Nvidia Unstable(Wheezy)?
Aug 23, 2011Recently, I installed VVVVVV and discovered that when attempting to use fullscreen mode, the monitor displays "video mode not supported" for 640x480, 800x600, 1024x768, and auto. After googling around for an hour or two (and only finding stuff from 2008-09) I have created a new xorg.conf from Xorg -configure and nvidia-xconfig. This doesn't seem to have had anyeffect.DebianRelease unstable (sid)Kernel Linux 3.0.0-1-amd64GNOME 3.0.2GeForce 7600 GSMonitor: Hyundai Imagequest
$ cat /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 280.13 (pbuilder@cake) Mon Aug 8 15:37:15 UTC 2011
[code].....
General :: Emergency Mode Can Mount HDD With FS Error / Not In Rescue Or Single User-mode
Dec 1, 2010My linux workstation recently crashed. After rebooting, Linux (Red Hat 5.3) will not boot properly and automatically went into emergency mode or recovery mode i think. I can still see my /home/user/ and all the files inside.I boot from CD to rescue mode and tried mounting read-only the /dev/sd5 which contains the files in the crashed hard disk to try to copy out my files but mounting was unsuccessful (invalid argument). I checked the filesystem type using fsck -N /dev/sda5 and shows it to ext2. i tried to mount another known working hdd and was successful.
My question is why in emergency mode, the crashed hdd is able to be mounted automatically as read-only but cannot be done in rescue mode thru a bootable CD?Is there any special mount options used in emergency mode?I also cannot copy out in emergency mode booting from the crashed hard disk as everything is read only.
Hardware :: Ubuntu On A Samsung Display - "Mode Not Supported"
Apr 2, 2010I thought I would try out Ubuntu and downloaded v9.10 and installed within Windows to test it out. But when it came to restarting my computer to finish the install, it would not display anything and just displayed "Mode Not Supported" on my screen (Samsung LE26R87). I did a bit of looking around and tried to see if I could find anything to help, but as I'm new to Ubuntu I could not find anything which I could understand.
View 2 Replies View RelatedUbuntu Installation :: Getting Error (Hardware Not Supported)?
Jul 12, 2010This was my problem for installing: [URL]. Now I downloaded ubuntu server edition, and typed sudo apt-get install kubuntu-desktop, so it did. Now I am starting my PC up, and I can't get past "waiting mouse" image and the background of the splash screen. I am on this error for a week or so already!
View 9 Replies View RelatedUbuntu Installation :: Error - Non-supported Refresh Rates 35.xx KHz / 75.x Hz
Feb 5, 2010I just got Ubuntu 9.10 CD from the Canonical Ltd. I started to Install Ubuntu 9.10.
It asked me to Select a language then it started loading
After a minute or two the screen showed some errors and my monitor showed an error non-supported refresh rates 35.xx KHz / 75.x Hz
I dont remember the exact numbers but this is the error. This error is generated by monitor's hardware not ubuntu.
Ubuntu Networking :: SMB Sharing Error - NT Status Not Supported
May 1, 2010I'm having a problem accessing a network share in windows 7 from Ubuntu 9.10. I can access this share from a Vista computer on the network, but not from Ubuntu. Windows 7 can also connect fine to my Ubuntu Samba shares. I get the following error when trying to connect with SMBclient.
Code:
smbclient -L KRONOS
Domain=[KRONOS] OS=[Windows 7 Ultimate 7600] Server=[Windows 7 Ultimate 6.1]
Sharename Type Comment
--------- ---- -------
Error returning browse list: NT_STATUS_NOT_SUPPORTED
Domain=[KRONOS] OS=[Windows 7 Ultimate 7600] Server=[Windows 7 Ultimate 6.1]
Server Comment
--------- -------
Workgroup Master
--------- -------
Ubuntu Servers :: Error Setfacl Operation Not Supported?
Aug 5, 2010I have a problem with acl's in Ubuntu Server 10.04. When i write in a terminal the command setfacl, the machine returns error: setfactl /home/xxxx: operation not supported.
View 1 Replies View RelatedUbuntu :: Error - The Stream Is Encrypted And Decryption Is Not Supported
Nov 16, 2010When I try to watch a video that's encrypted I Get this message
Quote:
The stream is encrypted and decryption is not supported.
What do I need to install to fix this in mplayer? Or can another video player solve this?
Ubuntu Installation :: Input Not Supported (Error Message)
May 27, 2011I recently tried to upgrade from Ubuntu 10.10 to 11.04. At first, the installation seemed to go smoothly, but when I tried to boot up, my screen displayed the following error message:
Input Not Supported
I am unsure how this is happening, since I was able to install 10.10 successfully. To better assist, I am attaching detailed information about my computer system.
Ubuntu Servers :: Error 13: Invalid Or Un Supported Executable Format?
Aug 4, 2010Ubuntu 9.04 server (64bit)
8GB
(2) 320 WD HDD - RAID 1
After coming home one evening I found my server was turned off. My suspicions lead me to believe we had a storm and the power went off, then the UPS went off and finally at that point the server went off too. I think my server was set to allow security updates. After it turned of and restarted it seems it made a change to Grub and upgraded it to Grub2. In doing so I now get the following message:
Error 13: Invalid or un supported executable format
I have tried to do the following:
url
This solved the problem for me, from > url
Quote:boot from the live medium and chroot into the Linux installation:
$ sudo mkdir /mnt/linux
$ sudo mount -t ext4 /dev/sda1 /mnt/linux
code....
Then, the following command should resolve the issue. :
$ sudo grub-install --recheck /dev/sda
OpenSUSE :: Error: Compositing Is Not Supported On Your System
Dec 1, 2010I am receiving the following error when trying to enable Compositing in Desktop Settings for KDE4 in openSuse 11.3-Xen
Code:
Error: Compositing is not supported on your system. Required X extensions (XComposite and XDamage) are not available. I want to have desktop effects enabled but can't seem to figure out how to get this done. "Advanced" Tab is greyed out. "Enable desktop effects" is greyed out.
[Code]...
This worked to get X up and running in the Xen kernel. However, I'm pulling what hair I have left trying to figure out how to enable compositing in Xen. The entire motivation for my upgrade was this one feature (amongst some other things).
Please show me where I'm going wrong. I hope this is not a "live with it" type of scenario due to my using Xen.
Ubuntu :: Error - Fixme:d3d:state_wrap (WINED3DRS_WRAP0) Texture Wrapping Not Yet Supported
Sep 23, 2010I think this might go for gaming, but maybe a general graphics problem could be taken into consideration for anything else that might display this error:
Code: fixme:d3d:state_wrap (WINED3DRS_WRAP0) Texture wrapping not yet supported. That was spammed in my terminal after I logged into my character. This was spamming itself before logging into my character:
Code:
err:d3d_surface:surface_allocate_surface >>>>>>>>>>>>>>>>> GL_INVALID_VALUE (0x501) from glTexImage2D @ surface.c / 862
err:d3d_surface:surface_allocate_surface >>>>>>>>>>>>>>>>> GL_INVALID_VALUE (0x501) from glTexImage2D @ surface.c / 862
[Code]...
Just to let you all know, I'm not all that advanced in Ubuntu or Linux knowledge, this game is just the only thing keeping me from going completely Ubuntu. I only have Windows installed to play this game, and I've gotten as far as to get this game playing this far,
Ubuntu :: TightVNC Error:server Did Not Offer Supported Security Type
May 10, 2011I will try to keep this straight-forward. Yesterday I was able to access an ubuntu 10.10 (edubuntu) desktop using the tightVNC viewer that I installed on my Vista laptop. I never set anything up on the desktop it just worked and I didn't question it.
Today I get the following error on the viewer software: "Server did not offer supported security type" The only thing that has changed was that I installed a bunch of updates yesterday afternoon, but I am not sure what changed.
Ubuntu :: Error 18 - Selected Cylinder Exceeds Maximum Supported By BIOS?
Dec 12, 2009Error 18 - Selected cylinder exceeds maximum supported by BIOS
I am running Jaunty Jackalope on a new machine and after a recent update I got the following message when trying to reboot:
Error 18 - Selected cylinder exceeds maximum supported by BIOS
After reading some of the info on Grub error 18 I decided to create a separate boot partition, as suggested. However, when trying to use Gparted from the live CD to create some space ahead of /sda1, Gparted would run for a while and then crash. The crash message says:
"e2fsck crashed with SIGSEGV in qsort" So now I am stuck, unable to boot from HDD and unable to create new partitions (the other partitions on the disk work fine with Gparted). Could all of this be due to corrupt /sda1 partition?
Fedora Installation :: ERROR: Your Architecture, 'x86_64', Is Not Supported By The
May 10, 2009I have downloaded Fedora 11 x64, and I went to the adobe website and downloaded the tar.gz file for flash player. I went into the terminal to untar the file and after I did that I tried to install it and got this error :
ERROR: Your architecture, 'x86_64', is not supported by the Adobe Flash Player installer. What does this mean? My dad could get his to install but his is 32 bit.Do I have to wait until the full version is out?
Programming :: Error 97 = Address Family Not Supported By Protocol?
Oct 18, 2010I have a very strange problem in a C++ RHEL4 app. Here is the code: socket(PF_INET, SOCK_STREAM, 0) returns errno 97 socket(PF_INET, SOCK_DGRAM, 0) returns successow that is strange or what?additional info:1. Extracting the above code into a test program, both return success.2. Placing the above code into the 1st line of my app, error as above.3. I ran app and test program in the same terminal window.4. My app links in many static libraries 5. My app runs fine when compiled and linked on RHEL56. My APP is a ss7 endpoint (SIP <==> SS7 message flow)7. I verified PF_INET, SOCK_STREAM, SOCK_SGRAM values are correct.
View 2 Replies View RelatedDebian Configuration :: Error: None Of The Authentication Protocols Specified Are Supported Kuser(3136)
Dec 18, 2010I installed today (fresh install) the latest version of squeeze, and after installing kuser, I attempted to run the program (of course as root), so that I can start managing accounts with my preferred application. However, this is what I got when I attempted to run the program:
# kuser
QGtkStyle was unable to detect the current GTK+ theme.
Qt: Session management error: None of the authentication protocols specified are supported
kuser(3136): Session bus not found
KCrash: Application 'kuser' crashing...
sock_file=/root/.kde/socket-hostname/kdeinit4__0
Warning: connect() failed: : No such file or directory
KCrash cannot reach kdeinit, launching directly.
[Code]...
Fedora Hardware :: Print - Client-error-document-format-not-supported ?
Nov 29, 2010I have just installed a Canon Pixma iP2200 on Fedora 14. The installation 'seemed' to go OK but whenever I try to print anything I get the following error:
"There was an error during the CUPS operation: 'client-error-document-format-not-supported'."
I have done a bit of searching and the only advice i could find is to uncomment some lines in /etc/cups/mime.convs and /etc/cups/mime.types but I don't have either of those files!
Installation :: Error 18: Selected Cylinder Exceeds Maximum Supported By BIOS
Mar 29, 2009I just downloaded the Fedora 10 cd yesterday and decided to install it. I had a partition for Fedora on my system before but I'm not really sure what I did to it. It wasn't booting and it has been so long since I messed with it I just decided to reinstall with the latest (I think I was running F9 previously). So I pop in the live CD, run the install, and then reboot into Ubuntu. I modified my menu.lst to include the new vmlinuz and initrd versions, as well as the new UUID of the partition. Now when I reboot and choose Fedora from grub's menu I get this error:
Quote:
Error 18: Selected cylinder exceeds maximum supported by BIOS
I found this wiki which does a pretty good job describing the problem:
[URL]
However, I'm still unable to get this to work. According to many different sites out there this problem shouldn't exist on newer computers. Well, I just recently put a new motherboard into this box -- it's this one:
[URL]
According to their BIOS page the first release of this was late November 2008. Yes they have had 2 updates since then but it looks like those only serve to support AM3 CPUs (which I don't have) or update some audio playback issues. I seriously doubt I need to update my BIOS to get this to work.
Here's my fdisk:
Code:
$ sudo fdisk -l
Disk /dev/sda: 400.0 GB, 400088457216 bytes
255 heads, 63 sectors/track, 48641 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
I can get Slackware 12.1 to boot (though it kernel panics during startup...not sure what I did to make it angry), but grub immediately fails when I attempt to boot Fedora. Here's the entry from menu.lst:
Quote:
titleFedora 10 (on /dev/sdb1)
root(hd1,0)
kernel/boot/vmlinuz-2.6.27.5-117.fc10.i686 ro root=UUID=178bc9f9-76ba-48aa-a588-de978cc1eee1 rhgb quiet
[code]...
I have verified that the vmlinuz and initrd are both correct. I put the UUID in there after running vol_id so I'm sure the entry is solid. I have tried making it "root=/dev/sdb1" which failed with the same error, and I even tried copying the fc10 vmlinuz and initrd files over to my Ubuntu partition (which controls grub) but for some odd reason the cp command takes a really long time and then I eventually get this weird error for initrd:
Quote:
$ sudo cp /media/sdb1/boot/initrd-2.6.27.5-117.fc10.i686.img .
cp: reading `/media/sdb1/boot/initrd-2.6.27.5-117.fc10.i686.img': Input/output error
I got the same error with the dd command too. So I was going to just try and copy the files to my sdb3 partition and then modify the menu.lst entry appropriately but that doesn't seem to be plausible at this point.
I have a motherboard that was just released about 4 months ago, an Athlon X2 6000+ CPU, and 4gigs of RAM. The drives are both SATA 300 drives...it's not like this is some old Pentium Pro and the BIOS just doesn't support large drives...this is a brand new system with a very recent BIOS version.
I have successfully quadruple booted all of these in the past, but that may have been prior to the new motherboard. So that makes me think it could be something related to the motherboard but the thing is so much newer than what I previously had, certainly that can't be the problem...can it? Then I remember that Slackware boots, so if it's truly something about how the BIOS can't access some file beyond a particular section of the disk, then it doesn't make any sense that it can book slackware. Fedora is the first partition, Slackware is the last and is like 200+ GB into the disk.
Server :: Error: Message Reported From The File System: FTP Copy Not Supported
Feb 24, 2010There is a centralized FTP server which are accessed by clients to develop some web development project and to achieve this the clients are using ftp service. The problem is when they are trying to copy any files and directories they are getting the following error: "Message reported from the file system: FTP copy not supported,use move instead"
I've checked all the permissions and they are all OK. I don't know why this is happening. they can create and move files and folders but can't copy files and folders.
Fedora Hardware :: Canon Pixma MP450 'client-error-document-format-not-supported'
Mar 1, 2011A neighbor of mine just got a Canon Pixma MP450 printer, to replace an old HP printer, and I am trying to get it to work with Fedora 11 installation from a machine they have borrowed from me. The printer gets recognized upon plugging it in but when I try to print a test page from the printer properties I receive the following error:'client-error-document-format-not-supported'
The driver that is selected for the printer is "Generic Driver" I have tried to select a driver but have not found any Canon drivers from the selection dialog box. After searching the web I see mention of a Canon MP150 driver working for the MP450 but I have not found this driver. Is there a driver I have to install from YUM or download from Canon? Are there others successfully using this printer and if so what have they done to get it to work?
General :: Partition Table From Fdisk - Cylinder Mode - Sector Mode - Expert Mode ?
Aug 30, 2010Below is a print out of my partition Table from Fdisk, in Cylinder mode, Sector mode, and then in expert mode?
Why in expert mode does it look like Partitions 2 and 3 share the same sector / hd / Cylinders? Is this OK?
Code:
CentOS 5 Networking :: Error "SET Failed On Device Wlan0 ; Operation Not Supported' When Configuring D-Link Wlan Card
Nov 15, 2009I have a desktop that has a d-link DWL-520 wireless card, which was working under Windoze. Today I installed Centos 5.4 on the system , which went cleanly. I then used Network Configuration to set up the wireless card. I specified to use DHCP, set the SSID and authentication password. When I tried to activate the card I get these error messages
Error for wireless request "Set Mode" (8B06): SET failed on device wlan0 ; Operation not supported. Error for wireless request "Set Encode" (8B2A): SET failed on device wlan0 ; Invalid argument. Error for wireless request "Set Encode" (8B2A): SET failed on device wlan0 ; Invalid argument. Determining IP information for wlan0.
The hardware manager seems to have correctly identified the card and chipset, (Intersil Prism 2.5) and installed driver hostap_pci which came with the distro. This web site seems to suggest that this is the correct driver: [URL] searching forums I've found a few references to these errors, but they were from several years ago, and for different distros and cards. I did find a reference to using Network Manager to configure the card instead of Network Configuration. I started the NM service and configured a connection using it instead, but still no luck.
[Code]....