taking out the windows master drive while installing ubuntu on the slave drive as i'm not entirely sure about the reasoning -- something to do with a GRUB confliction.
View 3 RepliesSo i am currently running Windows XP on my Master Drive, and i wanted to learn Linux. But since this PC is shared by other people, i cant just get rid of Windows, so i got a another HD. Can i download Ubuntu onto my Master Drive, and run the installation from my Master Drive and have it install onto my Slave Drive?
View 6 Replies View RelatedI am running openSuse 11.2 (32-bit), my CPU only supports 32-bits. I have a hardware RAID device. My system has 4GB of RAM. When I configure my system to only use 3GB, 2GB, or even 1GB, using mem=1024M in grub, my RAID performance is much better then when letting my system use the default 4GB available.Can anyone explain to me why this is? Is there anything I can do, i.e. kernel configuration, that will help performance when running with all 4GB enabled?
View 5 Replies View RelatedI recently installed the KDE (Kubuntu) desktop via Synaptic Package Manager. I have a few questions about this: Do I have to update Kubuntu when I update Ubuntu in October, or will it update on its own? Does running Kubuntu simultaneously on an Ubuntu machine cause any issues (slower performance, conflict in programs, etc.)? How do I uninstall Kubuntu if I decide that Ubuntu works just fine for me?
View 2 Replies View RelatedI can't find my slave hardrive I went and checked to see if I forgot to plug it in but I i had everything in the correct places I'm thinking it might be a defected drive.
View 2 Replies View Relatedi'm about to perform a fresh ubuntu install, and i was wondering if anyone knew whether installing on the slave or master drive mattered. i know if you're installing on the same drives it's slightly faster for ubuntu to be installed first, but that doesn't seem to be the case since i have two separate drives
View 9 Replies View RelatedI have installed Musix distro on my brand new amd 64 dual core computer but for some reason it is not showing in the media folder. Been a while since i mounted a slave and plain ubuntu seems to do it automatically so i forgot what commands i need to see it. Would love some help as the Musix forum is messed up. They have most of their forum in spanish and the parts that are english are not complete. I managed to sign up but that damn thing is really messed up. I signed up as over 18 but it sends you a form to have signed as under 18. Made 2 different users and still the same problem.
View 9 Replies View RelatedI just installed ubuntu, this is my first time with it so excuse my ignorance regarding it. My issue is that ubuntu does not show my secondary slave seagate hdd .. it only shows and installs on my western digital master primary one. I need to have access to my slave drive because it has data on it which i wanna use.
My secondary slave shows up in my windows and bios just fine. So what gives?
I have all these files saved to slave from when i was using windows music, movies, pictures, video games, software etc can i make the slave drive work in my linux distro without harming it the drive is ntfs formatted.
View 3 Replies View RelatedI got a sort of usb connected device(not an external enclosure) so i can connect a sata hard drive into a machine that only has ide connections but the drive is not mounting. I am not very good at mounting slave hard drives anyway ,,,,never been able to get one happening without help. I am wanting to read this drive as i killed another desktop machine(i think the mb) and i need the data off the hard drive. The drive is shown in a directory and in the media directory. Can't think of what else sorry as i am so tired from testing everything out of the machine that i killed.....
View 4 Replies View RelatedI want to mount the old partitioned drive with all my data as a slave and then transfer to the new system. Have fiddled around with settings in fstab without the required result. As I remember, disk was partitioned with home, root and swap.
View 5 Replies View RelatedHave older system, self-built around 2000 or so. My plan is to optimize the system for speed and utility, upgrade the OS from W2000 Pro to XP Pro, and include dual boot so as to install some version/distro (?) of Linux to learn on. Present system: X86 based (32 bit), using a P4, 1.8 GHz/400 MHz fsb, with 512mb of DDR RAM installed, can upgrade to 2 gigs total.Shuttle MV42 motherboard, including onboard video and sound (S3 Graphics ProSavage DDR P4M266/VIA 8751/8233 chipset, VIA AC'97 Audio Controller, 2.2 compliant)
If I should decide to use the available 160 gig drive as a dual boot system, in order to install both XP and some version of Linux, how should I set it up? How many partitions will XP and Linux need or work with best? How much space for each OS? What file systems? Should I format/partition it with the existing W2000 OS? What comes first, the chicken or the egg? (XP or Linux?) I have read somewhere that it matters which OS is installed first, due to boot records being overwritten by successive OS installs. I plan to keep W2000 on the first HDD at least until I move my files over to XP. Will I need to switch the master/slave designations after installing XP and Linux on the new drive, since I will want to boot from that drive?
so i used to have my harddrive mounted in fstab, to /mnt/diskS. than i decided to change the permissions to 766 global i believe i read somewhere with chmod. anyways so after that i checked to see if it worked and to my dis believe all my files are gone. or just arnt showing, the space taken up hasnt decreased but i just cant see any of my files. so i decided to take the harddrive out of fstab and restart my computer. and after restart when i click on the folder the harddrive is mounted in it says permissions belong to 1000?
View 1 Replies View RelatedOpenSuse 11.2
LXDE (Latest version)
It used to have a lightening speed. But now every application is taking few seconds to start, even on Konsole, the commands take some seconds to get typed ! (I literally have to wait for cursor to move and commands to get typed on Konsole). Folders are taking some seconds to get opened !
I rebooted the computer but that proved to be useless.
Here the ps output:
Code:
anisha@linux-uitj:~> pstree -Apuh `id -anisha`
id: invalid option -- 'i'
Try `id --help' for more information.
init(1)-+-acpid(1054)
[Code].....
Im experiencing a strange problem with 10.04. When it first boots up its reasonably quick (as snappy as Gnome ever has been) but after its been running for a day or two it gets ununsably slow and has to be rebooted.
I dont see how it can be anything to do with my hardware as it runs OK when first started. Ive monitored RAM usage and it doesnt seem to differ much. There's always the same amount unused.
I am currently running Ubuntu 1004 but I have the OS installed on a USB 2.0 hard drive because my normal hard drive caved. However I am having problems because there is a SEVERE lag on my system. So my question is if I buy like a 16 GB USB 2.0 and use that instead of my 4GB one will it make a performance difference? My laptop is the Dell Latitude D600(1GB RAM, 1.6 Ghz Processor, ATI Mobility Radeon 9000) and I AM NOT in the market for a new laptop or a new hard drive. Edit: What about buying an external hard drive and using that instead of USB's?
View 2 Replies View RelatedI am installing Red Hat Linux enterprise 5.0 on HP proliant ML 110 G5 with X3330, 8 Gb 2 X 250gb SATA Config. Time required for full istallation is around 2hours 30 minutes. What could be the reason?
View 3 Replies View Relatedif I make more partitions rather than creating single one, will I get more data access performance? E.g Instead of keeping 1,5TB partition, create 5x300MB and keep different data in different partitions? Logically hard drive will spend less time on finding data in smaller partition then in bigger one, right? Is there any statistics for performance vs size?
View 6 Replies View RelatedI just wanted to know if having my laptop set to ondemand, will this affect performance in any way? I realize it increases the clock speed to performance when the CPU is under load, but does the time it take to go from ondemand to performance affect speed? Will there be any noticeable difference between the two setups? I have a dual core intel at 2.2GHz when in performance. When ondemand is set with no load it downclocks to 800Mhz.
View 7 Replies View RelatedI would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
no entries exist in the /dev folder for hdc,cdrom,dvd, or any other drive or drive type than hda. The only other similar device is sg0 which doesn't work either. I have tried every variation of mount I can find with every available drive and drive type and nothing works, but this is the drive I installed FC14 with, and it installed perfectly (except for forgetting where it came from!!)Do I have to install a module or recompile the kernel just to get linux to recognize the drive it came from?
View 5 Replies View RelatedI want a new user to be able to access a slave harddrive via ssh, how do I sent up an account for that person it is on a local lan
View 3 Replies View RelatedI was wondering. Up till now whenever I installed Linux I've either dual booted with Windows off 1 HDD, or installed straight Linux by itself. However, I recently purchased a second HDD for my computer, and was wondering how I could go about installing Debian on the second drive without messing with the windows drive? Right now I have Windows 7 installed on my 1TB drive, and would like to try and install Debian on my second (750GB) drive. Would it be possible to install Debian on the second drive, install grub on that drive's MBR so I could choose between Debian and Win7 without touching the MBR on the 1TB Windows drive?
I'm paranoid about messing up my Seven installation, but really want to be able to load into Debian as well.
when on it`s own but if i put another drive on the same lead either as master or slave it is then reconised? If i boot into a boot disk for windows even though i have no c drive some of the utilities work the same and reconise it hd tune for instance.Would it have some thing to do with the size of the drive? Im using a fujitsu pentium 4 board.
View 2 Replies View RelatedI was looking in the disk utility and my primary slave has a few bad sectors, is there a way to fix this? I have attached a screen shot.
View 4 Replies View RelatedI'm fairly new to linux in general, I am making strides, and I decided to buy a 500gb hard drive to run as a slave, for the increasing amount of data I store, and I cant use it. I tried to follow a PsychoCats tutorial, and while it was informative, I either did something wrong, or I didn't understand. With Gparted I managed to format it with Ext4. IT shows up in my diskspace widgit as /dev/sdb1. But states it isn't accessible, and has a total drive space of 0mb. I don't need anything fancy. I just want it to read and write properly.
View 9 Replies View RelatedI noticed that the sftp kio slave in konq in alen bob's kde 4.4 wasn't working so did some digging and found that it's dependant on libssh now - I presume this hasn't been added yet to slack-current. I know fish is available but anyone else got comment on this?
View 5 Replies View RelatedI'm use Fedora but I want to install Ubuntu. How I may write Ubutu ISO image to my usb-drive from linux terminal?
View 2 Replies View Relatedcan i install ubuntu straight to my pendrive instead of the hard disk ?? will it work faster from pendrive??
View 4 Replies View RelatedI have 2 nameservers setup, a master and a slave. when I first setup the slave, I restarted bind9 and all of the zone records propagated just fine. Today, I updated one of the records on the master (no problems), but when I restarted bind9 on the slave it gave me a FAILED message. I checked the log and it was trying to receive notify's from my gateway address (192.168.10.1), and got "Failed to update from non-master". I did some research and found several people having a similar problem, but their slaves were trying to update from their own IP, not from the gateway IP. I tried their solution (allow-notify { 192.168.10.1; }) but all that did was allow the slave to restart bind without errors, it still doesn't update the records. It says "zone is up to date" but it's not.
IP's are:
Gateway 192.168.10.1
Master 192.168.10.200
Slave 192.168.10.201
All of my zone records have the masters statement set to 192.168.10.200 I don't know how it even came up with the gateway address