i have docky and i set it up so when i put in a disk or plug in an external drive it registers on the dock. what i want to know is how to make it so when i plug something in or put a disk in it doesnt pop up on the desktop?
View 2 Replies
I am building a home server that will host a multitude of files; from mp3s to ebooks to FEA software and files. I don't know if RAID is the right thing for me. This server will have all the files that I have accumulated over the years and if the drive fails than I will be S.O.L. I have seen discussions where someone has RAID 1 setup but they don't have their drives internally (to the case), they bought 2 separate external hard drives with eSata to minimize an electrical failure to the drives. (I guess this is a good idea)I have also read about having one drive then using a second to rsync data every week. I planned on purchasing 2 enterprise hard drives of 500 MB to 1 GB but I don't have any experience with how I should handle my data
View 10 Replies View RelatedI'm using SUSE11.1, and connected to my system, a DELL 7500, a 1.5 TB Buffalo external HD. I partitioned it in 4 sectors.After connection, nmediatly the mounted disk would appear on the screen,(each partition with its respective name), and could use it as any other folder.To unmount the external Hard disk, I just ejected each partition, and had no problem. I used the same HD with my Mc, and things were all right, I used to backup automatically the Mc. However after having been using the system in this way for more than half a year, suddenly the hard disk began to rattle...and the SUSE system on the DELL, nor the Mc can mount the external hard disk any more. Thus, the partitions can not be mounted any more. When I cd to /media/ in the SUSE, the names of the partitions appear, but they seem to be empty..On the Mc, going to /Volumes/, before the problem appeared, the names of the partitions were there... but now, they are no more and the automatic back up either.So my question is, how to mount the disk, if it needs mounting... or how I can recover the partitions and the data therein... I am clueless, after two weeks trying to solve the problem..
View 1 Replies View RelatedI currently use Ubuntu Lucid, and I'm curious if there is a program that I can install and run through it which will defragment an external USB hard drive.
My 500GB hard drive is used a lot, and I often add/remove stuff on and off of it, and I'm sure it's slowly starting to get a little fragmented with the amount of deletion and addition I do on it.
Does anybody know of a way to check and potentially defragment just it through linux? Or am I gonna have to just find a windows computer and do it there?
FYI, I don't care to nor know I really don't need to defragment my Ext4 drive to which Ubuntu's installed, its' just the external I am curious about.
So me and my friend our on my network and we have done a bit of hacking and have managed to get music off of pandora and have it sort it by forlder /media/...../artist/album/song and it won't redownload a song that we have already downloaded (this is done by our code that we stripped from pithos and modified a bit) also we wrote a bash script that renames all of our files correctly and tags them with .mp3
I was wondering if I could link our two hard drives to make sure that we aren't both downloading the same songs. I am also having issues getting my external accessible on the network i have it formatted to use a FAT32 file system.
I have an external hard drive that contains some 600 GB of files and folders. I use this external drive frequently and so the files and folders in it change on a daily basis. I want to back up this drive on another external drive. What is the best way to sync these two external hard drives on a daily basis?I have been trying to sync them through the Grsync software. But I think either I am not choosing the right options or else Grsync is not the best/right software for my purpose because the second hard drive does not ever become completely identical to the first one. What am I doing wrong? Should I go with another software? If so, are there suggestions for a good one? Or am I doing something not right?
When I run Grsync, I choose the first external hd as my source and the second one as my destination.Then below that I check "Preserve time," "Preserve permissions," "Preserve owner," and "Preserve group." Below that, I also check "Verbose" and "Show transfer progress." Other options are all unchecked.Should I reconfigure these options?FYI, I frequently rename, edit, modify, or else completely delete files and folders in the primary hard drive. Hence, my need to back it up everyday so that the change would be replicated in the second hard drive.
After some googling I found out that there might be a problem with highspeed external USB drives in Linux in general. Im using Ubuntu 10.10 32 bit and have now this problem I think. My external hard drive is working fine but when I type dmesg in a terminal I can see message errors that appear randomly with all my external hard drives. The problem is now, I have all my music on this drive and randomly I will have hangs while listening to music and the performance while tranferring data between my notebook and the USBs is poor. Anybody know a workaround for this problem or have the same experience or have more details about it? My principle USB device that I use is an iOmega 500 GB what I use on my Compaq 6730s. The other USB device is a Toshiba 1 TB. I tried to transfer the files into my homefolder to avoid this problem but there is no chance as on my notebook is no more space.
View 8 Replies View RelatedI am trying to figure out how to get the UUID for some of my external hard drives.the internet revealed a couple of promising leads, this is what I have tried so far:
ls -l /dev/disk/by-uuid -> didn't list the hard discs
blkid -> didn't list the hard discs
lsusb -v -> listed the hard disc but no uuid
A normally formatted usb key is listed with uuid. The external hard discs are fully encrypted by truecrypt(realcrypt). I have been reading not so great things about that itself, but for now I don't have a promising alternative that I can use with windows as well.Any google searches don't seem to cast any new light on this for me,I'd be open to suggestions if there's a better way to get a definite ID for a hard drive... I just need to be able to mount it with realcrypt
My file in (LG External Hard Drives ) is invisible but on windows the file is not hidden
[url]
[url]
I have set up two external hard drives to automount in fstab with the following lines:
/dev/sdb1 /media/DownstairsBackup ntfs-3g rw,auto,user,exec,sync 0 0
/dev/sda1 /media/UpstairsBackup ntfs-3g rw,auto,user,exec,sync 0 0
And right after I restart, all users have permission to read and write, and everything is fine. However, I have an automated backup utility (BackinTime) installed to back up particular (mounted network) directories every night, but whenever I check up on it the next day, I get the error "Unable to mount ..... Authorization required". (These network directories are mounted into the local filesystem in fstab as well.) Oddly enough, if I run BackinTime by hand as the users, it works fine. I'm running 10.04 LTS.
How to mount multiple external HDD's. I'd like to link or mount the music, torrents, and general files from several external hard drives and apply permissions (in some cases I only want the mount or link to be read only).
My setup:
- Seagate Dockstar running Debian squeeze (it's headless so I don't have a gui running)
- Two external HDD's with one partition on each (250GB and 400GB)
What I'd like to accomplish:
1. Mount the external HDD's to /media/HDDs as read/write (this is already working using udev and autofs and it's available in samba)
2. I'd like the MUSIC directories on both external HDD's to show up under the same mount point. In other words I want the MUSIC folders (from both HDD's) to appear as one large library of music. And I only want this to be readonly. It will be used as the library for mpd and/or squeezebox.
3. Mount a directory used to download torrents to. I'll probably pick on HDD as the target for torrent dowloads. But let me know if you have any other ideas regarding this.
Since I have the first one done, how would I accomplish 2 & 3?
I have a FAT32 external USB hard drive with a bunch of stuff I want to copy onto a RHEL server. Is it as simple as it is on a Mac or PC where I just plug it in and it will show up, then I can copy all the files off of it?If it is, how do I safely remove the drive after I'm done with it?
View 5 Replies View RelatedI mount the shared drives (on a Windows Server 2003) and I can access them from my home directory. Everything is mostly fine. But I also get desktop icons for the shared drives, which I don't like since I prefer a bare desktop. Sometimes I have deleted desktop icons from /usr/share/dist/... but these are not there.
View 1 Replies View RelatedMonths ago one of my computers died. I have bought a brand new one laptop, but I have a problem at the moment I wanted to install Ubuntu in dual boot with Windows 7: the new partition that windows 7 reserves for securing system files.
There are three partitions: Windows 7 principal, Windows 7 for securing system files (at the drive's beginning) and the recovery partition that HP puts there. Then I only have option to resize the Windows principal partition and get another principal partition. My question is if you know how to deal with this?
The other option you can help me is to advise me about some external hard drives to install ubuntu in them and don't touch the internal disk of my laptop.
1) Environment:
Ubuntu 10.04
2) Phenomenon:
External hard drives won't be automatically mounted after upgrading some packages...
I have a "not good" habit: I'd love to upgrade whatever suggested by Ubuntu upgrading center every morning.
However, after upgrading some packages for today, my computer won't be able to automatically mount external harddrives, including file systems ext4 and ntfs.
My question is:
1) How can I check what packages have been upgraded just within today?
2) How to make my Ubuntu be able to automatically mount external hard drives whenever I plug in a harddrive as before?
Because a lot of users are using laptops now, and many want externals hard drives for backups, is there a program in Ubuntu (cross-platform with Windows would be nice) that backs up files to an external hard drive when the external drive is plugged in or on a timely basis? All backup systems seem to have a timed system, but these systems have annoying pop ups if your backup location is non-existant (e.g. Deja Dup).
Use case 1: I plug in my external, the program recognizes that and starts a backup.
Use case 2: I leave my external in all day and every 6 hours, my laptop backs up my files to it.
Is it possible to show only mounted external volumes on the desktop. I try the method of uncheck /app/nautilus/desktop/volumes_visible. But it hides both internal and external disk.
View 6 Replies View RelatedI just switched to Debian 6 from Mepis 8.5. When Debian loads, it doesn't recognize or mount my external hard drives.
View 4 Replies View RelatedI recently upgraded my computer and tried using same hard-drive in new one. Fedora 11 booted and allowed me to log-in. But system is un-usable as there are no Icons on desktop and no panels. While I know that initial installation is based on hardware profile of previous computer, is there any work-around to make it work without having to install fresh. Also, If I choose option "replace previous Linus version" from LiveCD, will that preserve my personal data and settings?
View 2 Replies View RelatedHaving problems with external hard drives. I may be wrong, but I suspect they originated with an upgrade to 10.04 last Christmas. Around that time I also started using Amazon's S3 storage system, and, as a consequence, I stopped using my WD 80G external drive, previously used to backup my important files.
A week or so ago I decided to start using the WD drive again. I can't remember exactly what I did, but it wasn't happy - never caused any problems before. When I plug it in, the on-off light as the front keeps flashing on and off, and when I try to remove the drive I get the message: Error unmounting volumne An error occured while performing an operation on "My Book" (Partition 1 of WD 800BB External): The device is busy
Details: Cannot unmount because file system on device is busy Assuming the device had died - it's about 5 years old - I bought a 160G Samsung S-Series drive - my but they do look neat! Unfortunately, this doesn't seem to have solved my problem. I plugged the new drive in, and it happily appeared on my desktop. It seemed a good idea at the time, but I then started to format the drive - using the default option of FAT. All went well at first, but then the format process stopped.
My new Samsung drive now seems to be operating pretty much as the WD device, I can't copy to the drive, and attempts to unmount it generate a response similar to what's happening with the WD drive. Currently, although plugged in, I can't see the drive on my desktop, although it appears under Places. However, when I try to mount the drive, I get the message: Unable to mount SAMSUNG A job is pending on /dev/sdb1
Yes, if my wife logs on it's on her desktop. If I switch user it will not appear and I can't access it. It's a 'freeagent' hard drive
View 3 Replies View Relatedupgraded from karmic through update managerANDnone of of my external drives cd drive or flash drives are picked upad to go back to karmic and will remain there for a whil
View 9 Replies View RelatedI recently had issues with the latest version of the Linux Kernels and I got that fixed but ever since that has happened none of my Drives will mount and they aren't even recognized.
View 1 Replies View RelatedI have two internal harddisk. Harddisk 1 has ubuntu, fedora installed and harddisk 2 has ubuntu installed. I normally connect either one, and use it. How can i always keep connect both harddisks, and at the start, select from which harddisk to boot? Or it's not possible?
View 7 Replies View RelatedI suspect this is not new but I just can't find where it was treated. Maybe someone can give me a good lead.I just want to prevent certain users from accessing CD/DVD drives and all external drives. They should be able to mount their home directories and move around within the OS but they shouldn't be able to move data away from the PC. Any Clues?
View 2 Replies View RelatedI have 2 ubuntu's: 1 on my ineternal hard drive, 1 on my external
When I startup without my ext drive =>GRUB error 21.
And when I plug it in I can choose: the standard ubuntu kernel is the one on my external, and the original one is listed under other...
I'd like to be able to startup without external hard drive and make the ubuntu on my internal drve the standard.
I am just trying to get a little help with a problem I have been having of late. I have an external Seagate drive (not a FreeAgent), which spins down, but won't wake up. I have googled for answers, and tried everything from sdparm to writing udev rules, but nothing seems to be helping. The most I have accomplished is keeping the drive alive for 45 minutes or so before it fails to respond. What's more, it won't mount on boot-up.I am wondering if this might be down to USB power management not playing nicely with the HD's power management. Is there any way to disable the USB power management?
View 2 Replies View RelatedI have Fedora 14 installed on my main internal drive. I have one Fedora 14 and one Fedora 15 installed on two separate USB drives.When I boot into any of these drives, I can't access any of the other hard drives from the other drivesll I can, but just the boot partitions.Is there any way of mounting the other partitions so I can access the information?---------- Post added at 12:42 PM ---------- Previous post was at 09:34 AM ----------I guess even an explanation on why I can't view them would be good too.
View 7 Replies View RelatedI have a SATA drive that worked fine. Then I installed two more hard drives into my system. When these hard drives are installed, if I try to access the SATA drive in Linux, it will start lightly clicking and then the drive will become unavailable. If I power on the machine without the other two hard drives then it works fine. What could be causing this to happen? I don't think it's heat because the two hard drives are far away from the SATA drive.
View 1 Replies View RelatedI've just upgraded to 11.04, but Unity is unfortunately not my cup of tea. I use the classic desktop but I cannot find a way to disable a certain graphical desktop effect... I'm thinking of how the current workspace quickly slides into the next when I choose a different workspace.
If my recollection is correct, you could turn effects like that off in 10.10. This makes me dizzy, does any of know how to turn this off?
