Ubuntu :: Backup Software That Is Aware When External Hard Drives Are Plugged In
Dec 1, 2010
Because a lot of users are using laptops now, and many want externals hard drives for backups, is there a program in Ubuntu (cross-platform with Windows would be nice) that backs up files to an external hard drive when the external drive is plugged in or on a timely basis? All backup systems seem to have a timed system, but these systems have annoying pop ups if your backup location is non-existant (e.g. Deja Dup).
Use case 1: I plug in my external, the program recognizes that and starts a backup.
Use case 2: I leave my external in all day and every 6 hours, my laptop backs up my files to it.
View 4 Replies
ADVERTISEMENT
Mar 26, 2011
I am building a home server that will host a multitude of files; from mp3s to ebooks to FEA software and files. I don't know if RAID is the right thing for me. This server will have all the files that I have accumulated over the years and if the drive fails than I will be S.O.L. I have seen discussions where someone has RAID 1 setup but they don't have their drives internally (to the case), they bought 2 separate external hard drives with eSata to minimize an electrical failure to the drives. (I guess this is a good idea)I have also read about having one drive then using a second to rsync data every week. I planned on purchasing 2 enterprise hard drives of 500 MB to 1 GB but I don't have any experience with how I should handle my data
View 10 Replies
View Related
Jan 12, 2010
I finally got my new internal hdd for my laptop. I plugged it in and installed windows 7 64 bit. Then I partitioned my external hdd (WD mybook 640gb), and installed ubuntu 9.1 on a 200gb partition of it. The problem is that I didn't unplug the internal hdd before I installed ubuntu. Now the computer will not start unless I have the external hard drive plugged in.
So what should I do so that I will be able to go into windows 7 normally if the external hdd is unplugged? I would also like to be able to use ubuntu when I plug in the external hdd. I wouldn't mind having to go to the boot menu and choosing the external hard drive every time I wanted to use ubuntu.
The reason I partitioned the external hard drive was because it has a lot more space than my 250gb internal hdd, and I also wanted to leave space open to use as was intended, to back up stuff.
However, now that I think about it, I wouldn't mind partitioning the internal hdd and just leaving the external blank (which I should have done in the first place).
View 5 Replies
View Related
Mar 11, 2011
I'm looking for a way to set up a backup with two 2TB hard drives. What I want to do is basically mirror two drives. What ever I copy to the one drive I want it to be "cloned" with the other drive.
Is there any software that could help me with this? Does anyone know of a better to do something like this?
View 9 Replies
View Related
Feb 7, 2011
I had this corrupted external hdd and so I formatted the main partition on it on windows but messed up in the formatting and ended up having to format the entire thing. I got some weird message about it not being initialized (no not mounted) so I was in compmgmt.msc in windows and right clicked it in device manager and it asked for master boot or GUID I selected the latter and formatted. Worked fine and all for a bit but now it doesn't show up as a drive. I noticed when using compmgmt.msc it showed up that it had installed driver software and was being recognized but in the partition editing area there was nothing on this drive, reinstalling driver software doesn't seem to help. Also GParted wont load up when I have it plugged in and Disk Utility doesn't show it. I am requesting help to fix this problem within Ubuntu 10.10 somehow so I can use it properly.
View 9 Replies
View Related
Oct 12, 2010
I currently have an Ubuntu 10.04 Server with 10 2TB hard drives (Hot Swappable). I discovered that having a software raid over 16TB is not supported, so I split the drives into 2 sections and have 2 Software Raid arrays storing my movies, audio, pictures, and other software. The total current usage is around 7TB.
Since backing the files up to DVDs or even BlueRay is laughable, I am going to backup the system to 2TB hard drives probably 4 of them, the problem becomes that I can only hook one backup drive at a time into the system using a hot swap tray. Now I know that I can do this manually by copying the files one at a time to the drive until it is full, switching the drive out and repeating this, but I am hoping for an automated solution, Start backup, plug first drive in, system fills up drive, swap and repeat. Also it would be nice if the system remembered what had already been backed up so when I add files to the system, I only need to attach the last drive and not start the process over.
View 3 Replies
View Related
May 9, 2010
I currently use Ubuntu Lucid, and I'm curious if there is a program that I can install and run through it which will defragment an external USB hard drive.
My 500GB hard drive is used a lot, and I often add/remove stuff on and off of it, and I'm sure it's slowly starting to get a little fragmented with the amount of deletion and addition I do on it.
Does anybody know of a way to check and potentially defragment just it through linux? Or am I gonna have to just find a windows computer and do it there?
FYI, I don't care to nor know I really don't need to defragment my Ext4 drive to which Ubuntu's installed, its' just the external I am curious about.
View 4 Replies
View Related
Feb 23, 2011
So me and my friend our on my network and we have done a bit of hacking and have managed to get music off of pandora and have it sort it by forlder /media/...../artist/album/song and it won't redownload a song that we have already downloaded (this is done by our code that we stripped from pithos and modified a bit) also we wrote a bash script that renames all of our files correctly and tags them with .mp3
I was wondering if I could link our two hard drives to make sure that we aren't both downloading the same songs. I am also having issues getting my external accessible on the network i have it formatted to use a FAT32 file system.
View 1 Replies
View Related
May 17, 2011
I have an external hard drive that contains some 600 GB of files and folders. I use this external drive frequently and so the files and folders in it change on a daily basis. I want to back up this drive on another external drive. What is the best way to sync these two external hard drives on a daily basis?I have been trying to sync them through the Grsync software. But I think either I am not choosing the right options or else Grsync is not the best/right software for my purpose because the second hard drive does not ever become completely identical to the first one. What am I doing wrong? Should I go with another software? If so, are there suggestions for a good one? Or am I doing something not right?
When I run Grsync, I choose the first external hd as my source and the second one as my destination.Then below that I check "Preserve time," "Preserve permissions," "Preserve owner," and "Preserve group." Below that, I also check "Verbose" and "Show transfer progress." Other options are all unchecked.Should I reconfigure these options?FYI, I frequently rename, edit, modify, or else completely delete files and folders in the primary hard drive. Hence, my need to back it up everyday so that the change would be replicated in the second hard drive.
View 9 Replies
View Related
Nov 22, 2010
After some googling I found out that there might be a problem with highspeed external USB drives in Linux in general. Im using Ubuntu 10.10 32 bit and have now this problem I think. My external hard drive is working fine but when I type dmesg in a terminal I can see message errors that appear randomly with all my external hard drives. The problem is now, I have all my music on this drive and randomly I will have hangs while listening to music and the performance while tranferring data between my notebook and the USBs is poor. Anybody know a workaround for this problem or have the same experience or have more details about it? My principle USB device that I use is an iOmega 500 GB what I use on my Compaq 6730s. The other USB device is a Toshiba 1 TB. I tried to transfer the files into my homefolder to avoid this problem but there is no chance as on my notebook is no more space.
View 8 Replies
View Related
Jan 10, 2010
I've been working at this for the past 2 days now. My computer got some kind of virus or something that has caused it to loop at startup and continually reset. I run an XP OS on a Gateway. I desperately need to backup my files, because the person who had my backup absently deleted my stuff. I was able to boot up using an Ubuntu disc and I'm in it right now, I've found my files, I have an external hard drive. The problem:First, it wont let me paste into the hard drive. If I drag, it says "Error while copying to "/media/FreeAgent Drive". You do not have permissions to write to this folder." I've mounted the external drive, nothing changes.
I've gone in to properties, is says under permissions that the owner is root, folder access is "Access files" and at the bottom is says "You are not the owner, so you can't change these permissions." The drop downs where I need to change permissions is in gray, so I can;t change it.So next, I tried "gksu nautilus", went to the drive through there, and it let me use the drop down selection under permissions. I tried to change the folder access and I got this message: "The permissions could not be changed. Couldn't change the permissions of "FreeAgent Drive" because it is on a read-only disk." So I tried changing the file access to Read and Write. It didn't give an error, so I thought perhaps it finally worked. I hit apply, and tried to put my files in. Once again I got the message from before that said I didn't have permission. I tried to change the owner so it was no longer root and I got "The owner could not be changed. Couldn't change the owner of "FreeAgent Drive" because it is on a read-only disk."I'm getting so frustrated right now. These files are VERY important to me! The hard drive I have is a Seagate FreeAgent desk 500GB
View 9 Replies
View Related
Jan 16, 2011
My ubuntu login window seems to be chrased and seems no way to restore it. I was planning to move ahead with reinstalling it but could any1 tell me how can i copy data to external hard disk. I am in Mannual restore section with promt staying at root@ubuntu :/#
View 9 Replies
View Related
Apr 7, 2011
I am trying to figure out how to get the UUID for some of my external hard drives.the internet revealed a couple of promising leads, this is what I have tried so far:
ls -l /dev/disk/by-uuid -> didn't list the hard discs
blkid -> didn't list the hard discs
lsusb -v -> listed the hard disc but no uuid
A normally formatted usb key is listed with uuid. The external hard discs are fully encrypted by truecrypt(realcrypt). I have been reading not so great things about that itself, but for now I don't have a promising alternative that I can use with windows as well.Any google searches don't seem to cast any new light on this for me,I'd be open to suggestions if there's a better way to get a definite ID for a hard drive... I just need to be able to mount it with realcrypt
View 3 Replies
View Related
Feb 4, 2011
My file in (LG External Hard Drives ) is invisible but on windows the file is not hidden
[url]
[url]
View 14 Replies
View Related
Sep 10, 2010
I have set up two external hard drives to automount in fstab with the following lines:
/dev/sdb1 /media/DownstairsBackup ntfs-3g rw,auto,user,exec,sync 0 0
/dev/sda1 /media/UpstairsBackup ntfs-3g rw,auto,user,exec,sync 0 0
And right after I restart, all users have permission to read and write, and everything is fine. However, I have an automated backup utility (BackinTime) installed to back up particular (mounted network) directories every night, but whenever I check up on it the next day, I get the error "Unable to mount ..... Authorization required". (These network directories are mounted into the local filesystem in fstab as well.) Oddly enough, if I run BackinTime by hand as the users, it works fine. I'm running 10.04 LTS.
View 1 Replies
View Related
Mar 18, 2011
but I have literally just starting using Linux (Centos) in the last week or so. I am using a standalone PC that is not networked, and as I will be downloading and generating a lot of data on this machine, I would like to regularly backup onto an external hard driveIdeally I would likethis to happen automatically as there will be other people using the machine.There seem to be many different ways of doing this, and I am getting a bit confused about the best method to use.
View 2 Replies
View Related
Dec 20, 2010
How to mount multiple external HDD's. I'd like to link or mount the music, torrents, and general files from several external hard drives and apply permissions (in some cases I only want the mount or link to be read only).
My setup:
- Seagate Dockstar running Debian squeeze (it's headless so I don't have a gui running)
- Two external HDD's with one partition on each (250GB and 400GB)
What I'd like to accomplish:
1. Mount the external HDD's to /media/HDDs as read/write (this is already working using udev and autofs and it's available in samba)
2. I'd like the MUSIC directories on both external HDD's to show up under the same mount point. In other words I want the MUSIC folders (from both HDD's) to appear as one large library of music. And I only want this to be readonly. It will be used as the library for mpd and/or squeezebox.
3. Mount a directory used to download torrents to. I'll probably pick on HDD as the target for torrent dowloads. But let me know if you have any other ideas regarding this.
Since I have the first one done, how would I accomplish 2 & 3?
View 1 Replies
View Related
Oct 6, 2009
I have a FAT32 external USB hard drive with a bunch of stuff I want to copy onto a RHEL server. Is it as simple as it is on a Mac or PC where I just plug it in and it will show up, then I can copy all the files off of it?If it is, how do I safely remove the drive after I'm done with it?
View 5 Replies
View Related
Jun 3, 2010
Months ago one of my computers died. I have bought a brand new one laptop, but I have a problem at the moment I wanted to install Ubuntu in dual boot with Windows 7: the new partition that windows 7 reserves for securing system files.
There are three partitions: Windows 7 principal, Windows 7 for securing system files (at the drive's beginning) and the recovery partition that HP puts there. Then I only have option to resize the Windows principal partition and get another principal partition. My question is if you know how to deal with this?
The other option you can help me is to advise me about some external hard drives to install ubuntu in them and don't touch the internal disk of my laptop.
View 6 Replies
View Related
Sep 8, 2010
1) Environment:
Ubuntu 10.04
2) Phenomenon:
External hard drives won't be automatically mounted after upgrading some packages...
I have a "not good" habit: I'd love to upgrade whatever suggested by Ubuntu upgrading center every morning.
However, after upgrading some packages for today, my computer won't be able to automatically mount external harddrives, including file systems ext4 and ntfs.
My question is:
1) How can I check what packages have been upgraded just within today?
2) How to make my Ubuntu be able to automatically mount external hard drives whenever I plug in a harddrive as before?
View 3 Replies
View Related
Mar 19, 2011
i have docky and i set it up so when i put in a disk or plug in an external drive it registers on the dock. what i want to know is how to make it so when i plug something in or put a disk in it doesnt pop up on the desktop?
View 2 Replies
View Related
May 11, 2011
I have installed luckybackup software on my ubuntu 10.10 notebook edition. But I don't know how to use it to backup files to an external hard drive. The Hard Drive is a 1 TB Seagate. I don't think that the Destination Drop down menu in luckybackup even shows the External HD.
View 14 Replies
View Related
Feb 10, 2011
I just switched to Debian 6 from Mepis 8.5. When Debian loads, it doesn't recognize or mount my external hard drives.
View 4 Replies
View Related
Sep 30, 2010
How I can backup all my system & files to external hard drive?
I am using OpenSuse 11.3 32bit - Gnome
View 8 Replies
View Related
May 19, 2011
Having problems with external hard drives. I may be wrong, but I suspect they originated with an upgrade to 10.04 last Christmas. Around that time I also started using Amazon's S3 storage system, and, as a consequence, I stopped using my WD 80G external drive, previously used to backup my important files.
A week or so ago I decided to start using the WD drive again. I can't remember exactly what I did, but it wasn't happy - never caused any problems before. When I plug it in, the on-off light as the front keeps flashing on and off, and when I try to remove the drive I get the message: Error unmounting volumne An error occured while performing an operation on "My Book" (Partition 1 of WD 800BB External): The device is busy
Details: Cannot unmount because file system on device is busy Assuming the device had died - it's about 5 years old - I bought a 160G Samsung S-Series drive - my but they do look neat! Unfortunately, this doesn't seem to have solved my problem. I plugged the new drive in, and it happily appeared on my desktop. It seemed a good idea at the time, but I then started to format the drive - using the default option of FAT. All went well at first, but then the format process stopped.
My new Samsung drive now seems to be operating pretty much as the WD device, I can't copy to the drive, and attempts to unmount it generate a response similar to what's happening with the WD drive. Currently, although plugged in, I can't see the drive on my desktop, although it appears under Places. However, when I try to mount the drive, I get the message: Unable to mount SAMSUNG A job is pending on /dev/sdb1
View 1 Replies
View Related
Jan 18, 2010
I'm breaking into the OS drive side with RAID-1 now. I have my server set up with a pair of 80 GB drives, mirrored (RAID-1) and have been testing the fail-over and rebuild process. Works great physically failing out either drive. Great! My next quest is setting up a backup procedure for the OS drives, and I want to know how others are doing this.
Here's what I was thinking, and I'd love some feedback: Fail one of the disks out of the RAID-1, then image it to a file, saved on an external disk, using the dd command (if memory serves, it would be something like "sudo dd if=/dev/sda of=backupfilename.img") Then, re-add the failed disk back into the array. In the event I needed to roll back to one of those snapshots, I would just use the "dd" command to dump the image back on to an appropriate hard disk, boot to it, and rebuild the RAID-1 from that.
Does that sound like a good practice, or is there a better way? A couple notes: I do not have the luxury of a stack of extra disks, so I cannot just do the standard mirror breaks and keep the disks on-hand, and using something like a tape drive is also not an option.
View 4 Replies
View Related
Oct 21, 2010
I have two shares in total and there are also two external hard drives. The server is used by two different organisations that are not supposed to have access to the data of the other one(at least not as normal users).he script I need should run in the background of the server and when a drive is plugged in, it should check, which organization the drive belongs to, and depending on who the drive belongs to, backup the respective share.When the drive belong to neither, it should just do nothing.Unfortunately, I have no clue about scripting and so this makes writing a script like that, at least for me, impossible.So I wanted to know if somebody could name some good websites for learning to write such a script or give tips.
View 9 Replies
View Related
May 9, 2010
upgraded from karmic through update managerANDnone of of my external drives cd drive or flash drives are picked upad to go back to karmic and will remain there for a whil
View 9 Replies
View Related
Jun 21, 2010
I recently had issues with the latest version of the Linux Kernels and I got that fixed but ever since that has happened none of my Drives will mount and they aren't even recognized.
View 1 Replies
View Related
Oct 18, 2010
I suspect this is not new but I just can't find where it was treated. Maybe someone can give me a good lead.I just want to prevent certain users from accessing CD/DVD drives and all external drives. They should be able to mount their home directories and move around within the OS but they shouldn't be able to move data away from the PC. Any Clues?
View 2 Replies
View Related
