This is my first time compiling a software, I have successfully downloaded and extracted the "basic256_0.9.6.32.tgz" file,but There is no configure file present in the extracted contents,also make and checkinstall exit with error.What seems to be the problem Here is the output of errors I got during Installation
[Code]...
I'm using Ubuntu 10.04 (actually Linux Mint 9 but I can't remember my password to their forum...) and have had a couple of crashes with my installation of Thunderbird which from the repositories is one behind the current version. I've downloaded the tar.gz files from Mozilla and though I don't really want to get in the habit of it I'd like to do the hopefully simple compiling to get this running. Can someone give me some pointers? I've unzipped the download and there isn't anything in there that runs as far as I can see.
View 3 Replies View RelatedI have written a program that I would like to cross compile for x86 and x86_64 architectures. I have tried google and the search function here to no success, most information I find is too specific (instructions for a specific program), or dealing with cross compiling for windows on linux.Does anyone know of a tutorial dealing with straight making a 32 bit binary on a 64 bit processor (both are intel)?
View 2 Replies View RelatedI'm trying to compile wine from source, with a patch to make it work for Worms Armageddon. I've applied the patch and go to run
Code:
$ ./configure
It then pumps out rows of text and at the end reads:
Code:
configure: WARNING: No OpenGL library found on this system.
OpenGL and Direct3D won't be supported. I went ahead and finished compiling it but it doesn't run worms, so I've come back to this opengl issue.
I'm trying to get an nginx/php-fpm/mysql stack setup on Ubuntu Server 10.04 LTS 32 bit version.
I have pretty much got everything going fine, except PHP extensions. For whatever reason when I compile php it is seeming to not compile any extensions with it ?
I am using the following configure flags:
Code:
./configure --prefix=/opt/php5 --with-config-file-path=/opt/php5/etc --with-curl --with-pear --with-gd --with-jpeg-dir --with-png-dir --with-zlib --with-mcrypt --with-mhash --with-mysql --with-mysqli --with-pdo-mysql --with-openssl --with-xmlrpc --with-xsl --with-bz2 --with-gettext --with-fpm-user=www-data --with-fpm-group=www-data --enable-fpm --enable-exif --enable-wddx --enable-zip --enable-bcmath --enable-calendar --code....
I have already open a thread in scribus forum but I am not sure if they know the solution, and I don't think is specifically related to scribus. I am receiving a generic unknown cmake error with QT5 library when try to compile Scribus 1.5, probably I need to install some library more but which?
Code: Select allcmake ../scribus -Wno-dev -DCMAKE_INSTALL_PREFIX:PATH=/usr/local/bin/
CMake Error at styles/CMakeLists.txt:21 (QT5_WRAP_CPP):
Unknown CMake command "QT5_WRAP_CPP".
-- Configuring incomplete, errors occurred!
See also "/home/myuser/Compilati/scribus-1.5.0/builddir/CMakeFiles/CMakeOutput.log".
myuser@Debian-635:~/Compilati/scribus-1.5.0/builddir$ cmake ../scribus -Wno-dev -DCMAKE_INSTALL_PREFIX:PATH=/usr/local/bin/
CMake Error at styles/CMakeLists.txt:21 (QT5_WRAP_CPP):
Unknown CMake command "QT5_WRAP_CPP".
-- Configuring incomplete, errors occurred!
I'm trying to install the rt2870 driver on my server running Ubuntu Server 8.04. I've installed build-essential, checkinstall, cvs, subversion, git-core, mercurial... After uncompressing the tarball, doing a "sudo make" gives me this output:
[Code]...
I use Workrave on Windows to make sure that I walk away from my computer every now and then, but I can't find it in openSUSE's repositories although it is available for Linux.
Then I tried compiling it from source, but I got this error...
pdedecker@linux-s6cn:~/Desktop/workrave-1.9.3> ./autogen.sh **Warning**: I am going to run `configure' with no arguments. If you wish to pass any to it, specify them on the `./autogen.sh' command line.
Running intltoolize...
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
[Code].....
Is Workrave incompatible with KDE4? Is openSUSE using a different windowing system?
I'm willing to try similar software packages if they're easier to install.
trying to compile and install wxGTK-2.4.2,i configure with the line-./configure --with-gtk --enable-gtk2 --enable-unicode but when i go to make and make install i get the format not a string literal error, how can I fix this? really need wxGTK2.4 for some old apps.
View 1 Replies View Relatedis there anyway to get zenity 2.32.0 installed on lucid besides compiling it from source? because i noticed it was available for maverick.
is this version likely to be available for lucid?
So I have compiled from source a libgsf debian package. However when I go to install it dpkg complains that "libgsf depends on libgsf-1" however as you can see if you look on the debian page libgsf-1 is the same source as the ligsf package...
How can I resolve this redundant/recursive issue? For now I have just force installed my package (and it appears to be working) but if I am going to distribute it to other people I need to get this fixed.
I am running a Fedora 13 x64 . The latest kernel I get is 2.6.34.8 in testing from yumex. However I want to install 2.6.37 How do I do it, without compiling from the source (which I think is beyond my scope at this point). I am more concerned with this because I am planning to get LMDE for my notebook but I came to know that it runs 2.6.32 kernel, so would I be able to update it? There's also the Liquorix kernel that I have read about, with many people saying that its better for daily usage scenarios--is that true, and is there some major difference in code?
View 1 Replies View RelatedI'm trying to install the Avant Window Navigator by compiling the source files and installing that way. I've extracted the file avant-window-navigator-0.4.0.tar.gz, but when I run the ./configure command, I get an error.
Code:
configure: error: in `/usr/src/avant-window-navigator-0.4.0':
configure: error:
Could not link test program to Python. Maybe the main Python library has been
installed in some non-standard library path. If so, pass it to configure
[Code].....
I'm trying to install the latest Kmess from source, but when configuring it (it's really a wrapper for cmake) I get the following error: configuring KMess 2.0.6.1
checking build directory
running cmake from /usr/src/kmess-2.0.6.1/build
command: cmake -D CMAKE_INSTALL_PREFIX=/usr
-D CMAKE_BUILD_TYPE=relwithdebinfo
-D KMESS_DEBUG_OUTPUT=0
[Code]...
fix the problems mentioned above, and run ./configure again. For example, make sure you have the KDE 4 devel packages installed.I've done this yesterday on another computer and it worked fine once I had both libgif4 and libgif-dev installed. The problem is that I've got both of those packages installed on this computer and I still get the error.
After finally figuring out how exactly how to compile something from source, I did it with Wine. However, there's a problem, when I'm trying to play a game on Steam (Half-Life) on a TNT2 graphics card (With NVIDIA drivers 71.86 installed as well as all of the packages needed to compile Wine from source), everything either lags or has an error.
One of these errors is that OpenGL32 isn't being initialized after attempting to start the game in that mode. Another error (or I should say problem) is that in Direct3D mode, it just.. crashes lol. Also, in Software mode, it LAGS horribly and I don't think it has to do with the hardware limitations I have on this machine. I did however install the glx and gl drivers AFTER I compiled Wine, do I have to do yet another install?
Debian Lenny 5.0.8
667MHz Celeron Coppermine
NVIDIA TNT2 32mb VRAM card
I'm trying to install the calculator Qalculate from source so I download the tar.gz package for KDE from their official website to my ~/Downloads folder. I unzipped it with
Code: Select all tar xzf qalculate-kde-0.9.7.tar.gz
I moved the exploded folder to my /home/guest/ folder (my user-name is guest), I entered the qalculate-kde-0.9.7 folder and searched for a INSTALL or README file. Here's what the INSTALL file says to do. The INSTALL file says to run the following commands
Code: Select all./configure
Code: Select allmake
Code: Select allmake install
Code: Select allmake clean
After giving the first command, trouble started; here's what I got:
Code: Select allroot@aliquis:/home/guest/qalculate-kde-0.9.7# ./configure
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking for -p flag to install... yes
[Code] .....
This is impossible, as I am running a fully functioning kde system. What should I do? I don't find the kde version of Qalculate in Apper...
I am trying to install MySQL by compiling source files.Using mysql-5.1.46]version./configure --prefix=/usr/local/mysql was fine and I am getting following error while "make"
[Code]...
how to uninstall Mplayer and other programs that is installed by compiling source files(./configure, make , make install)
View 14 Replies View RelatedCan someone please tell me what packages are required for compiling source on Slack 13? Something is missing in my box and I get errors, I can't figure out what it is.
View 11 Replies View RelatedI am trying to install form source (gnome-voice-control-0.4.tar) the voice recognition tool. ./configure seems to go fine, the Makefile has been made bur when I try to install by typing make some errors appear.
code:
Quote:
[root@piotr gnome-voice-control-0.4]# ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes[code].....
When I compile evince from its source code, I am able to run ./configure properly, but when I run make the following output is displayed.
Code:
make all-recursive
make[1]: Entering directory `/media/New_Volume/untitled folder/evince-2.32.0'
Making all in cut-n-paste
make[2]: Entering directory `/media/New_Volume/untitled folder/evince-2.32.0/cut-n-paste'
Making all in zoom-control
make[3]: Entering directory `/media/New_Volume/untitled folder/evince-2.32.0/cut-n-paste/zoom-control' .....
make[3]: *** [libevview.la] Error 1
make[2]: *** [all] Error 2
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
I am not able to ascertain the source of this error, even though I seem to have the file in question-libevdocument.la. What do I do now to remove this error?
Code:
anisha@linux-uitj:~/junk> ls -R
.:
include src
./include:
template0.h template0.h~ template0.h.gch
[code]....
Is there a startup option I can put in the /etc/init.d/mysqld script or an option in the /etc/my.cnf file to enable the Archive engine for MySQL or do I have to compile it from the source?
[Code]....
In order to configure a dual display in a fresh 11.4 installation, I am attempting to install the nVidia driver according to the instructions in SDB:NVIDIA the hard way - openSUSE. I have not previously compiled or configured a kernel so I largely followed the instructions from OpenSUSE 11.2 - How to compile a Kernel for Newbies.The currently installed kernel is 2.6.37.1-1.2-desktop. The graphics card is an ASUS EN9600GSO (512MB).
In Yast, I installed gcc, make, kernel-devel (v. 2.6.37.1-1.2) and kernel-desktop-devel (v. 2.6.37.1-1.2). Per the "hard way" instructions, I did not install kernel-source.
I recently installed Fedora 13 on my system, and I'm still in the process of setting it up as I like. As the FCEU and snes9x versions on rpmfusion are old (fceultra 0.98, snes without GUI), I wanted to compile my own RPMs Everything went OK, but I found myself having to build the packages several times because of missing LDFLAGS. I got several errors like "symbol X missing, it was found on Y so you may want to add Y to the linker flags", which I fixed by modifying & exporting LDFLAGS.
So, 2 questions:
1.- why are the LDFLAGS missing? How can I avoid having to set them up manually?
2.- There should be a way to avoid re-compiling the source and only run the rpm packaging stuff with the already built things (some option like 'don't build, only package'). how can I do that?
BTW, I can share my (pretty much hacked) .spec files if you are interested
Just switched over to Ubuntu 11.04 32bit. I have spent the day configuring it to my likings, and am content with Ubuntu. I have zero experience with coding, and bare minimum knowledge. Anyways, I have gotten some tar.gz files, that I have extracted them into folders, and then in terminal I run ./configure, and then I get the error "You need intltool 0.40.0 or later".
View 2 Replies View RelatedBelow is the recipe I've used to compile dwm from source on Squeeze
su
apt-get install devscripts debian-keyring
apt-get build-dep dwm
exit
It all seems to work, however debuild gave an error about secret keys. Is this a sensible procedure? What happens in the (probably unlikely) event there is another source patch?I've gone to a tiling window manager as the result of the purchase of a wide screen LCD monitor. I like to have some stuff down the right hand side when running Firefox and OpenOffice in the main panes. Any configuration tricks welcome. Modern screens are the wrong shape!
Is there any open source virtual machine so i can study the source in order to create my own? i'm gonna write my own, so it doesNT matter if license does not allow further development of the code.
View 1 Replies View Relatedi am already a little bit familiar with linux and now i want to know better the linux OS. i have downloaded the source code of the krnel from the kernel.org and i dont understand the linux source trees organization, so can somebody do me a favor and give me a link to some internet page (or at least a book) that explains that?? i have searched in the internet with the tag:::linux source trees organization and i have not found nothing interesting
View 1 Replies View RelatedI want to see the source code of smplayer software.from where i can see source code of open source softwares?
View 9 Replies View Related