Software :: Compiling Evince From Source Code - Make Errors
Mar 20, 2011
When I compile evince from its source code, I am able to run ./configure properly, but when I run make the following output is displayed.
Code:
make all-recursive
make[1]: Entering directory `/media/New_Volume/untitled folder/evince-2.32.0'
Making all in cut-n-paste
make[2]: Entering directory `/media/New_Volume/untitled folder/evince-2.32.0/cut-n-paste'
Making all in zoom-control
make[3]: Entering directory `/media/New_Volume/untitled folder/evince-2.32.0/cut-n-paste/zoom-control' .....
make[3]: *** [libevview.la] Error 1
make[2]: *** [all] Error 2
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
I am not able to ascertain the source of this error, even though I seem to have the file in question-libevdocument.la. What do I do now to remove this error?
View 8 Replies
ADVERTISEMENT
Jun 5, 2011
Just switched over to Ubuntu 11.04 32bit. I have spent the day configuring it to my likings, and am content with Ubuntu. I have zero experience with coding, and bare minimum knowledge. Anyways, I have gotten some tar.gz files, that I have extracted them into folders, and then in terminal I run ./configure, and then I get the error "You need intltool 0.40.0 or later".
View 2 Replies
View Related
Apr 28, 2011
I am trying to install NachOS on fedora, i make a nachos directory and download the nachos source code and cross compiler, then i extract the zip files and patch the make files and everything is okay till now. but when it comes to compiling nachos, i followed these steps.
* ~/nachos> cd NachOS-4.0
* ~/nachos/NachOS-4.0> cd code/build.linux
* ~/nachos/NachOS-4.0/code/build.linux> make depend
[code]....
View 10 Replies
View Related
Feb 26, 2010
I am running Valgrind on my program. It shows me two errors but mentions only addresses against them and not actual code even on a debug build.
The output is
==23002== Memcheck, a memory error detector.
==23002== Copyright (C) 2002-2005, and GNU GPL'd, by Julian Seward et al.
==23002== Using LibVEX rev 1575, a library for dynamic binary translation.
[code]....
View 1 Replies
View Related
Sep 16, 2010
how to make rpm file from source code of software?
View 2 Replies
View Related
Apr 11, 2011
i am already a little bit familiar with linux and now i want to know better the linux OS. i have downloaded the source code of the krnel from the kernel.org and i dont understand the linux source trees organization, so can somebody do me a favor and give me a link to some internet page (or at least a book) that explains that?? i have searched in the internet with the tag:::linux source trees organization and i have not found nothing interesting
View 1 Replies
View Related
Sep 12, 2010
I want to see the source code of smplayer software.from where i can see source code of open source softwares?
View 9 Replies
View Related
Dec 27, 2010
I tried to compiling a code on 32-bit OpenSuSe 11.1, but it was terminated with following error: # ***No rule to make target '/usr/lib/libGLU.a', needed by 'DXA_debug'. Stop Then I installed the freeglut-2.6.0, but there were only libGLU.so and libGLU.so.1 in /usr/lib folder. And the compiling process was terminated with the same error. Will you give me some instruction to solve this problem?
View 3 Replies
View Related
Jul 28, 2010
today I tried to run desktopdrapes. my first command ./configure was completet after I installed the missing pakages. the next step is the 'make' command. But with this command I get 5 Errors and 2 Warnings:
Code:
e-Lasto:/home/carolin/programme/drapes # make
Making all in drapes
make[1]: Entering directory `/home/carolin/programme/drapes/drapes'
/usr/bin/gmcs -debug -r:System.Xml -r:Mono.Posix -pkg:gconf-sharp-2.0 -pkg:glade-sharp-2.0 -pkg:gnome-vfs-sharp-2.0 -resource:../data/drapes.glade,drapes.glade
[Code].....
View 4 Replies
View Related
Apr 19, 2011
Trying to compile Inkscape 0.48.1 on Red Hat Enterprise Linux Server release 5.5 and I am running into this issue
Code:
checking for Python development environment... skipped
checking for LCMS... yes
checking for POPPLER... no
checking for POPPLER_GFXFONT... no
[Code]...
View 5 Replies
View Related
Jun 7, 2010
I'm running Slack64 13.1 on a Macbook Pro 5,3 and trying to compile pommed but I keep getting the following error when running 'make pommed':
[code]...
View 8 Replies
View Related
Jan 25, 2010
so I just installed code blocks after clear installing ubuntu 64 everything went fine but when I try to compile and run my .cpp files code::blocks wont do anything I dont get any messages on the build log so I dont understand whats happening I tried looking on the forums and checking other pages such as the one bellow but no luck at all. [URL]
View 1 Replies
View Related
May 18, 2011
I can compile an old fortran program on my macbook using the Absoft fortran compiler and the command:f90 'W132 C SOURCECODE.flU77lV77
Unfortunately I cannot find f90 for linux. I can, however, find gfortran. However, gfortran does not recognize the flag -W132 and when I remove -W132 the compiler thinks all lines end after a certain number of characters. Does anyone know what flags call the equivalent type of compilation using gfortran? Is it possible I need to use f90? If so, is there a free version of f90 for linux?
View 8 Replies
View Related
Sep 14, 2010
I've made the real mistake of buying a laptop with a Broadcom wifi adapter on it. (That thwacking sound is me kicking myself for not noticing after spending weeks and weeks carefully choosing the model I wanted.)
lspci gives this:
02:00.0 Network controller: Broadcom Corporation Device 4727 (rev 01)
I have downloaded the 32 bit drivers from here (am running Mandriva 2010.1 Free 32 bit). The readme indicates the 4727 is supported by the latest OS drivers amazingly. [URL]. I have installed the Linux kernel source files.
First problem comes with the first instruction in the readme.
# mkdir hybrid_wl
# cd hybrid_wl
# tar xzf <path>/hybrid-portsrc.tar or <path>/hybrid-portsrc-x86_64.tar.gz
The tar instruction just does nothing, so I just right clicked in Dolphin and unpacked it to its own directory. I navigated the terminal to where it unpacked and did make. I got this:
Code:
[robertw@localhost hybrid-portsrc-x86_32-v5.60.48.36]$ make
KBUILD_NOPEDANTIC=1 make -C /lib/modules/`uname -r`/build M=`pwd`
make[1]: Entering directory `/usr/src/linux-2.6.33.5-2mnb'
ERROR: Kernel configuration is invalid.
include/generated/autoconf.h or include/config/auto.conf are missing.
Run 'make oldconfig && make prepare' on kernel src to fix it.
WARNING: Symbol version dump /usr/src/linux-2.6.33.5-2mnb/Module.symvers is missing; modules will have no dependencies and modversions.
CC [M] /home/robertw/Downloads/hybrid-portsrc-x86_32-v5.60.48.36/src/shared/linux_osl.o
/home/robertw/Downloads/hybrid-portsrc-x86_32-v5.60.48.36/src/shared/linux_osl.c:1: error: code model "kernel" not supported in the 32 bit mode
/home/robertw/Downloads/hybrid-portsrc-x86_32-v5.60.48.36/src/shared/linux_osl.c:1: sorry, unimplemented: 64-bit mode not compiled in
make[2]: *** [/home/robertw/Downloads/hybrid-portsrc-x86_32-v5.60.48.36/src/shared/linux_osl.o] Error 1
make[1]: *** [_module_/home/robertw/Downloads/hybrid-portsrc-x86_32-v5.60.48.36] Error 2
make[1]: Leaving directory `/usr/src/linux-2.6.33.5-2mnb'
make: *** [all] Error 2
View 5 Replies
View Related
Mar 25, 2011
I have installed some pdf readers on my notebook, and the one I most liked was evince. But there are two available evince packages: evince and evince-gtk. What is the difference between them? Does one of them have advantages as to the other?
View 1 Replies
View Related
Dec 7, 2009
Keep receiving the following error message when i try to compile any code:
Code:
checking how to run the C++ preprocessor... /lib/cpp
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
logs test out some code with the C preprocessor and fail, thereby failing the "sanity check" I reinstalled cpp, but to no avail.
View 1 Replies
View Related
Jul 3, 2010
Is there an online resource to lookup error messages generated when compiling C++ code?
View 5 Replies
View Related
Jan 1, 2011
I use Workrave on Windows to make sure that I walk away from my computer every now and then, but I can't find it in openSUSE's repositories although it is available for Linux.
Then I tried compiling it from source, but I got this error...
pdedecker@linux-s6cn:~/Desktop/workrave-1.9.3> ./autogen.sh **Warning**: I am going to run `configure' with no arguments. If you wish to pass any to it, specify them on the `./autogen.sh' command line.
Running intltoolize...
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
[Code].....
Is Workrave incompatible with KDE4? Is openSUSE using a different windowing system?
I'm willing to try similar software packages if they're easier to install.
View 9 Replies
View Related
Sep 13, 2010
This is my first time compiling a software, I have successfully downloaded and extracted the "basic256_0.9.6.32.tgz" file,but There is no configure file present in the extracted contents,also make and checkinstall exit with error.What seems to be the problem Here is the output of errors I got during Installation
[Code]...
View 14 Replies
View Related
May 19, 2011
Basically, I'm trying to compile program A, which depends on LibA and LibB. LibA would not build with my version of G++ 4.4.3 due to a bug, so I've compiled the latest G++ 4.5 (installed in /opt directory) and built that library successfully (also installed in /opt).
I have LibB on my system already, but it was built with the 4.4.3 version. When compiling my final program, am I going to have issues because the .so files were built with different versions of gcc/g++? Or should I just rebuild a special version of LibB with the later version of the compiler just for that program? I can proceed and just see what happens, but I'm a little confused about how things work in a situation like this.
View 2 Replies
View Related
Mar 30, 2011
I did a ./configure and make and got this returned about 1/2 hr later:
Code:
undefined reference to `glDisable'
undefined reference to `glDisable'
undefined reference to `glutKeyboardFunc'
undefined reference to `glutSpecialFunc'
undefined reference to `glReshapeFunc'
And the oddest part is.... I passed --disable-gl to configure!
View 4 Replies
View Related
Jul 8, 2010
I'm trying to compile wine from source, with a patch to make it work for Worms Armageddon. I've applied the patch and go to run
Code:
$ ./configure
It then pumps out rows of text and at the end reads:
Code:
configure: WARNING: No OpenGL library found on this system.
OpenGL and Direct3D won't be supported. I went ahead and finished compiling it but it doesn't run worms, so I've come back to this opengl issue.
View 1 Replies
View Related
Jun 29, 2011
I'm trying to get an nginx/php-fpm/mysql stack setup on Ubuntu Server 10.04 LTS 32 bit version.
I have pretty much got everything going fine, except PHP extensions. For whatever reason when I compile php it is seeming to not compile any extensions with it ?
I am using the following configure flags:
Code:
./configure --prefix=/opt/php5 --with-config-file-path=/opt/php5/etc --with-curl --with-pear --with-gd --with-jpeg-dir --with-png-dir --with-zlib --with-mcrypt --with-mhash --with-mysql --with-mysqli --with-pdo-mysql --with-openssl --with-xmlrpc --with-xsl --with-bz2 --with-gettext --with-fpm-user=www-data --with-fpm-group=www-data --enable-fpm --enable-exif --enable-wddx --enable-zip --enable-bcmath --enable-calendar --code....
View 2 Replies
View Related
Jan 11, 2010
So I have compiled from source a libgsf debian package. However when I go to install it dpkg complains that "libgsf depends on libgsf-1" however as you can see if you look on the debian page libgsf-1 is the same source as the ligsf package...
How can I resolve this redundant/recursive issue? For now I have just force installed my package (and it appears to be working) but if I am going to distribute it to other people I need to get this fixed.
View 1 Replies
View Related
Feb 18, 2011
I am running a Fedora 13 x64 . The latest kernel I get is 2.6.34.8 in testing from yumex. However I want to install 2.6.37 How do I do it, without compiling from the source (which I think is beyond my scope at this point). I am more concerned with this because I am planning to get LMDE for my notebook but I came to know that it runs 2.6.32 kernel, so would I be able to update it? There's also the Liquorix kernel that I have read about, with many people saying that its better for daily usage scenarios--is that true, and is there some major difference in code?
View 1 Replies
View Related
Oct 20, 2010
Here is my problem: I have a Vala program that includes classes with nested classes. When I try to initialize classes (using the variable type and the variable, followed by the class's arguments [three unsigned 8-bit integers] in parentheses) and try to compile the Vala code to C code what I tried to AVOID doing, as I really wanted to create a shared object file, but now I know I have to use C code as a middleman, the compiler tells me it expects a semicolon between the class variable name and its members.
What?! A semicolon in a bad place, that's for sure! Why would I want to put a semicolon *BETWEEN* the class initialization and its members? Isn't the whole point of a class to *HAVE* different members? Here is my class:
Code:
public class Gtk.rgba : GLib.Object {
public class fg_color : GLib.Object {
private uint8 red;
private uint8 green;
private uint8 blue;
//Constructor
public fg_color(uint8 r, uint8 g, uint8 b) {
[Code].....
View 14 Replies
View Related
Jun 15, 2011
I'm trying to compile a main.c file that contains a while statement. Embedded in the while statement are functions that are being called. After the while statement, I have 2 more functions being called, one to find the average(getaverage), and one to print the results (printstuff). I also used a header file (my.h) that contains all of the needed #define and #include, along with each of the void function() statements.
There isn't any problems with the while statement/ the functions in while, but when I try and compile main.c I get the following errors:
main.c error: conflicting types for 'getaverage'
my.h error: previous declaration of 'getaverage'
and then the same thing for 'printstuff'
View 3 Replies
View Related
Apr 14, 2011
I'm trying to install the latest Kmess from source, but when configuring it (it's really a wrapper for cmake) I get the following error: configuring KMess 2.0.6.1
checking build directory
running cmake from /usr/src/kmess-2.0.6.1/build
command: cmake -D CMAKE_INSTALL_PREFIX=/usr
-D CMAKE_BUILD_TYPE=relwithdebinfo
-D KMESS_DEBUG_OUTPUT=0
[Code]...
fix the problems mentioned above, and run ./configure again. For example, make sure you have the KDE 4 devel packages installed.I've done this yesterday on another computer and it worked fine once I had both libgif4 and libgif-dev installed. The problem is that I've got both of those packages installed on this computer and I still get the error.
View 6 Replies
View Related
Feb 13, 2011
After finally figuring out how exactly how to compile something from source, I did it with Wine. However, there's a problem, when I'm trying to play a game on Steam (Half-Life) on a TNT2 graphics card (With NVIDIA drivers 71.86 installed as well as all of the packages needed to compile Wine from source), everything either lags or has an error.
One of these errors is that OpenGL32 isn't being initialized after attempting to start the game in that mode. Another error (or I should say problem) is that in Direct3D mode, it just.. crashes lol. Also, in Software mode, it LAGS horribly and I don't think it has to do with the hardware limitations I have on this machine. I did however install the glx and gl drivers AFTER I compiled Wine, do I have to do yet another install?
Debian Lenny 5.0.8
667MHz Celeron Coppermine
NVIDIA TNT2 32mb VRAM card
View 3 Replies
View Related
Oct 20, 2015
I have already open a thread in scribus forum but I am not sure if they know the solution, and I don't think is specifically related to scribus. I am receiving a generic unknown cmake error with QT5 library when try to compile Scribus 1.5, probably I need to install some library more but which?
Code: Select allcmake ../scribus -Wno-dev -DCMAKE_INSTALL_PREFIX:PATH=/usr/local/bin/
CMake Error at styles/CMakeLists.txt:21 (QT5_WRAP_CPP):
Unknown CMake command "QT5_WRAP_CPP".
-- Configuring incomplete, errors occurred!
See also "/home/myuser/Compilati/scribus-1.5.0/builddir/CMakeFiles/CMakeOutput.log".
myuser@Debian-635:~/Compilati/scribus-1.5.0/builddir$ cmake ../scribus -Wno-dev -DCMAKE_INSTALL_PREFIX:PATH=/usr/local/bin/
CMake Error at styles/CMakeLists.txt:21 (QT5_WRAP_CPP):
Unknown CMake command "QT5_WRAP_CPP".
-- Configuring incomplete, errors occurred!
View 14 Replies
View Related
