I am trying to install MySQL by compiling source files.Using mysql-5.1.46]version./configure --prefix=/usr/local/mysql was fine and I am getting following error while "make"
[Code]...
I'm trying to install the Avant Window Navigator by compiling the source files and installing that way. I've extracted the file avant-window-navigator-0.4.0.tar.gz, but when I run the ./configure command, I get an error.
Code:
configure: error: in `/usr/src/avant-window-navigator-0.4.0':
configure: error:
Could not link test program to Python. Maybe the main Python library has been
installed in some non-standard library path. If so, pass it to configure
[Code].....
Is there a startup option I can put in the /etc/init.d/mysqld script or an option in the /etc/my.cnf file to enable the Archive engine for MySQL or do I have to compile it from the source?
[Code]....
how to uninstall Mplayer and other programs that is installed by compiling source files(./configure, make , make install)
View 14 Replies View RelatedCode:
anisha@linux-uitj:~/junk> ls -R
.:
include src
./include:
template0.h template0.h~ template0.h.gch
[code]....
In order to configure a dual display in a fresh 11.4 installation, I am attempting to install the nVidia driver according to the instructions in SDB:NVIDIA the hard way - openSUSE. I have not previously compiled or configured a kernel so I largely followed the instructions from OpenSUSE 11.2 - How to compile a Kernel for Newbies.The currently installed kernel is 2.6.37.1-1.2-desktop. The graphics card is an ASUS EN9600GSO (512MB).
In Yast, I installed gcc, make, kernel-devel (v. 2.6.37.1-1.2) and kernel-desktop-devel (v. 2.6.37.1-1.2). Per the "hard way" instructions, I did not install kernel-source.
Where is the best path to install all files of package when compiling?
For example - I want to install ProFTPd, so there's an option
--prefix=/usr/local/proftpd
, which means, that all files after compilation (including binary and configuration files) will be stored here. As you know, all packages, which are installed via package system (like zypper on SuSE or apt on Ubuntu) usually stores its configuration files in /etc/ and binary files in /sbin/ and also stores a link in my $PATH, so i can run in just by typing proftpd (without /sbin).
The huge advantage of packages installed via package system, i think, is easy uninstall process. I'd like to be able to uninstall compiled packages also easy.
I think i could be able to create some batch file, which I'll be able to use like this:
uninstall --package=proftpd
And my script will find all proftpd files in usuall paths (/etc, /sbin) and remove it using rm.
Is there any best practices, where to store all these files, or are there any (dis)advantages of my first example (--prefix=/usr/local/proftpd)?
I really don't think, that it's nice to have 2 paths with configuration files and binary files, but maybe I'm misunderstanding the basic principals of Linux... :-)
I use Workrave on Windows to make sure that I walk away from my computer every now and then, but I can't find it in openSUSE's repositories although it is available for Linux.
Then I tried compiling it from source, but I got this error...
pdedecker@linux-s6cn:~/Desktop/workrave-1.9.3> ./autogen.sh **Warning**: I am going to run `configure' with no arguments. If you wish to pass any to it, specify them on the `./autogen.sh' command line.
Running intltoolize...
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
[Code].....
Is Workrave incompatible with KDE4? Is openSUSE using a different windowing system?
I'm willing to try similar software packages if they're easier to install.
This is my first time compiling a software, I have successfully downloaded and extracted the "basic256_0.9.6.32.tgz" file,but There is no configure file present in the extracted contents,also make and checkinstall exit with error.What seems to be the problem Here is the output of errors I got during Installation
[Code]...
I'm trying to compile wine from source, with a patch to make it work for Worms Armageddon. I've applied the patch and go to run
Code:
$ ./configure
It then pumps out rows of text and at the end reads:
Code:
configure: WARNING: No OpenGL library found on this system.
OpenGL and Direct3D won't be supported. I went ahead and finished compiling it but it doesn't run worms, so I've come back to this opengl issue.
I'm trying to get an nginx/php-fpm/mysql stack setup on Ubuntu Server 10.04 LTS 32 bit version.
I have pretty much got everything going fine, except PHP extensions. For whatever reason when I compile php it is seeming to not compile any extensions with it ?
I am using the following configure flags:
Code:
./configure --prefix=/opt/php5 --with-config-file-path=/opt/php5/etc --with-curl --with-pear --with-gd --with-jpeg-dir --with-png-dir --with-zlib --with-mcrypt --with-mhash --with-mysql --with-mysqli --with-pdo-mysql --with-openssl --with-xmlrpc --with-xsl --with-bz2 --with-gettext --with-fpm-user=www-data --with-fpm-group=www-data --enable-fpm --enable-exif --enable-wddx --enable-zip --enable-bcmath --enable-calendar --code....
So I have compiled from source a libgsf debian package. However when I go to install it dpkg complains that "libgsf depends on libgsf-1" however as you can see if you look on the debian page libgsf-1 is the same source as the ligsf package...
How can I resolve this redundant/recursive issue? For now I have just force installed my package (and it appears to be working) but if I am going to distribute it to other people I need to get this fixed.
I am running a Fedora 13 x64 . The latest kernel I get is 2.6.34.8 in testing from yumex. However I want to install 2.6.37 How do I do it, without compiling from the source (which I think is beyond my scope at this point). I am more concerned with this because I am planning to get LMDE for my notebook but I came to know that it runs 2.6.32 kernel, so would I be able to update it? There's also the Liquorix kernel that I have read about, with many people saying that its better for daily usage scenarios--is that true, and is there some major difference in code?
View 1 Replies View RelatedI'm trying to install the latest Kmess from source, but when configuring it (it's really a wrapper for cmake) I get the following error: configuring KMess 2.0.6.1
checking build directory
running cmake from /usr/src/kmess-2.0.6.1/build
command: cmake -D CMAKE_INSTALL_PREFIX=/usr
-D CMAKE_BUILD_TYPE=relwithdebinfo
-D KMESS_DEBUG_OUTPUT=0
[Code]...
fix the problems mentioned above, and run ./configure again. For example, make sure you have the KDE 4 devel packages installed.I've done this yesterday on another computer and it worked fine once I had both libgif4 and libgif-dev installed. The problem is that I've got both of those packages installed on this computer and I still get the error.
After finally figuring out how exactly how to compile something from source, I did it with Wine. However, there's a problem, when I'm trying to play a game on Steam (Half-Life) on a TNT2 graphics card (With NVIDIA drivers 71.86 installed as well as all of the packages needed to compile Wine from source), everything either lags or has an error.
One of these errors is that OpenGL32 isn't being initialized after attempting to start the game in that mode. Another error (or I should say problem) is that in Direct3D mode, it just.. crashes lol. Also, in Software mode, it LAGS horribly and I don't think it has to do with the hardware limitations I have on this machine. I did however install the glx and gl drivers AFTER I compiled Wine, do I have to do yet another install?
Debian Lenny 5.0.8
667MHz Celeron Coppermine
NVIDIA TNT2 32mb VRAM card
I have already open a thread in scribus forum but I am not sure if they know the solution, and I don't think is specifically related to scribus. I am receiving a generic unknown cmake error with QT5 library when try to compile Scribus 1.5, probably I need to install some library more but which?
Code: Select allcmake ../scribus -Wno-dev -DCMAKE_INSTALL_PREFIX:PATH=/usr/local/bin/
CMake Error at styles/CMakeLists.txt:21 (QT5_WRAP_CPP):
Unknown CMake command "QT5_WRAP_CPP".
-- Configuring incomplete, errors occurred!
See also "/home/myuser/Compilati/scribus-1.5.0/builddir/CMakeFiles/CMakeOutput.log".
myuser@Debian-635:~/Compilati/scribus-1.5.0/builddir$ cmake ../scribus -Wno-dev -DCMAKE_INSTALL_PREFIX:PATH=/usr/local/bin/
CMake Error at styles/CMakeLists.txt:21 (QT5_WRAP_CPP):
Unknown CMake command "QT5_WRAP_CPP".
-- Configuring incomplete, errors occurred!
I'm trying to install the calculator Qalculate from source so I download the tar.gz package for KDE from their official website to my ~/Downloads folder. I unzipped it with
Code: Select all tar xzf qalculate-kde-0.9.7.tar.gz
I moved the exploded folder to my /home/guest/ folder (my user-name is guest), I entered the qalculate-kde-0.9.7 folder and searched for a INSTALL or README file. Here's what the INSTALL file says to do. The INSTALL file says to run the following commands
Code: Select all./configure
Code: Select allmake
Code: Select allmake install
Code: Select allmake clean
After giving the first command, trouble started; here's what I got:
Code: Select allroot@aliquis:/home/guest/qalculate-kde-0.9.7# ./configure
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking for -p flag to install... yes
[Code] .....
This is impossible, as I am running a fully functioning kde system. What should I do? I don't find the kde version of Qalculate in Apper...
I'm trying to install the rt2870 driver on my server running Ubuntu Server 8.04. I've installed build-essential, checkinstall, cvs, subversion, git-core, mercurial... After uncompressing the tarball, doing a "sudo make" gives me this output:
[Code]...
Can someone please tell me what packages are required for compiling source on Slack 13? Something is missing in my box and I get errors, I can't figure out what it is.
View 11 Replies View RelatedI am trying to install form source (gnome-voice-control-0.4.tar) the voice recognition tool. ./configure seems to go fine, the Makefile has been made bur when I try to install by typing make some errors appear.
code:
Quote:
[root@piotr gnome-voice-control-0.4]# ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes[code].....
trying to compile and install wxGTK-2.4.2,i configure with the line-./configure --with-gtk --enable-gtk2 --enable-unicode but when i go to make and make install i get the format not a string literal error, how can I fix this? really need wxGTK2.4 for some old apps.
View 1 Replies View Relatedis there anyway to get zenity 2.32.0 installed on lucid besides compiling it from source? because i noticed it was available for maverick.
is this version likely to be available for lucid?
When I compile evince from its source code, I am able to run ./configure properly, but when I run make the following output is displayed.
Code:
make all-recursive
make[1]: Entering directory `/media/New_Volume/untitled folder/evince-2.32.0'
Making all in cut-n-paste
make[2]: Entering directory `/media/New_Volume/untitled folder/evince-2.32.0/cut-n-paste'
Making all in zoom-control
make[3]: Entering directory `/media/New_Volume/untitled folder/evince-2.32.0/cut-n-paste/zoom-control' .....
make[3]: *** [libevview.la] Error 1
make[2]: *** [all] Error 2
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
I am not able to ascertain the source of this error, even though I seem to have the file in question-libevdocument.la. What do I do now to remove this error?
I have no preior experience about to installation procedure in linux.currently i am using red hat linux which normally support rpm.I have to download a software from net which have extention like blablabla.tar.gz or blablabla.bz2.Normally most softwares can be complied in installed in three simple steps
./configure
Make command
Make install
I have not use these commands i just have a bit knowledge about it which i have mentioned here. how to extract sourse code fine and then compile and at last installed in the pc.
I recently installed Fedora 13 on my system, and I'm still in the process of setting it up as I like. As the FCEU and snes9x versions on rpmfusion are old (fceultra 0.98, snes without GUI), I wanted to compile my own RPMs Everything went OK, but I found myself having to build the packages several times because of missing LDFLAGS. I got several errors like "symbol X missing, it was found on Y so you may want to add Y to the linker flags", which I fixed by modifying & exporting LDFLAGS.
So, 2 questions:
1.- why are the LDFLAGS missing? How can I avoid having to set them up manually?
2.- There should be a way to avoid re-compiling the source and only run the rpm packaging stuff with the already built things (some option like 'don't build, only package'). how can I do that?
BTW, I can share my (pretty much hacked) .spec files if you are interested
When trying to install the nvidia graphics driver I get the following error-message:
ERROR: The kernel header file '/usr/src/linux/include/linux/version.h' does not exist. The most likely reason for this is that the kernel source files in '/usr/src/linux' have not been configured. How do I configure the kernel source files?
I've met several issues recently while building the MySQL server from CentOS 5 SRPM. The root problem are the expired SSL certificates used for built-in tests making all the tests fail. The problem is widely described on the net and I am in doubt now what to do: should I submit a patch or what?
View 1 Replies View RelatedI just tried installing mysql on my vps from source code. after untaring the source code. when i tried to configure the ./configure script. iwas not able to find it. it is not there.
View 1 Replies View RelatedI am using liferay5.2 with tomcat 6. after installation of liferay5.2 i am unable to configure the datasource that points to the database mysql.without this liferay wont function. how to create a mail session in tomcat that points to the mail server. i am using fedora 6.
View 5 Replies View RelatedI am using MySQL version 5.1.47 (64bit) on Centos 5.5 in production environment. I am exploring option to monitor MySQL though SNMP traps. Can anybody please let me know if there is any open source SNMP tool that can be used for MySQL monitoring?
View 4 Replies View Related