General :: Improper Pacakge Name When Compiling .deb From Source?
Jan 11, 2010
So I have compiled from source a libgsf debian package. However when I go to install it dpkg complains that "libgsf depends on libgsf-1" however as you can see if you look on the debian page libgsf-1 is the same source as the ligsf package...
How can I resolve this redundant/recursive issue? For now I have just force installed my package (and it appears to be working) but if I am going to distribute it to other people I need to get this fixed.
View 1 Replies
ADVERTISEMENT
Jan 1, 2011
I use Workrave on Windows to make sure that I walk away from my computer every now and then, but I can't find it in openSUSE's repositories although it is available for Linux.
Then I tried compiling it from source, but I got this error...
pdedecker@linux-s6cn:~/Desktop/workrave-1.9.3> ./autogen.sh **Warning**: I am going to run `configure' with no arguments. If you wish to pass any to it, specify them on the `./autogen.sh' command line.
Running intltoolize...
Running libtoolize...
libtoolize: putting auxiliary files in `.'.
libtoolize: copying file `./ltmain.sh'
[Code].....
Is Workrave incompatible with KDE4? Is openSUSE using a different windowing system?
I'm willing to try similar software packages if they're easier to install.
View 9 Replies
View Related
Sep 13, 2010
This is my first time compiling a software, I have successfully downloaded and extracted the "basic256_0.9.6.32.tgz" file,but There is no configure file present in the extracted contents,also make and checkinstall exit with error.What seems to be the problem Here is the output of errors I got during Installation
[Code]...
View 14 Replies
View Related
Jul 8, 2010
I'm trying to compile wine from source, with a patch to make it work for Worms Armageddon. I've applied the patch and go to run
Code:
$ ./configure
It then pumps out rows of text and at the end reads:
Code:
configure: WARNING: No OpenGL library found on this system.
OpenGL and Direct3D won't be supported. I went ahead and finished compiling it but it doesn't run worms, so I've come back to this opengl issue.
View 1 Replies
View Related
Jun 29, 2011
I'm trying to get an nginx/php-fpm/mysql stack setup on Ubuntu Server 10.04 LTS 32 bit version.
I have pretty much got everything going fine, except PHP extensions. For whatever reason when I compile php it is seeming to not compile any extensions with it ?
I am using the following configure flags:
Code:
./configure --prefix=/opt/php5 --with-config-file-path=/opt/php5/etc --with-curl --with-pear --with-gd --with-jpeg-dir --with-png-dir --with-zlib --with-mcrypt --with-mhash --with-mysql --with-mysqli --with-pdo-mysql --with-openssl --with-xmlrpc --with-xsl --with-bz2 --with-gettext --with-fpm-user=www-data --with-fpm-group=www-data --enable-fpm --enable-exif --enable-wddx --enable-zip --enable-bcmath --enable-calendar --code....
View 2 Replies
View Related
Feb 18, 2011
I am running a Fedora 13 x64 . The latest kernel I get is 2.6.34.8 in testing from yumex. However I want to install 2.6.37 How do I do it, without compiling from the source (which I think is beyond my scope at this point). I am more concerned with this because I am planning to get LMDE for my notebook but I came to know that it runs 2.6.32 kernel, so would I be able to update it? There's also the Liquorix kernel that I have read about, with many people saying that its better for daily usage scenarios--is that true, and is there some major difference in code?
View 1 Replies
View Related
Apr 14, 2011
I'm trying to install the latest Kmess from source, but when configuring it (it's really a wrapper for cmake) I get the following error: configuring KMess 2.0.6.1
checking build directory
running cmake from /usr/src/kmess-2.0.6.1/build
command: cmake -D CMAKE_INSTALL_PREFIX=/usr
-D CMAKE_BUILD_TYPE=relwithdebinfo
-D KMESS_DEBUG_OUTPUT=0
[Code]...
fix the problems mentioned above, and run ./configure again. For example, make sure you have the KDE 4 devel packages installed.I've done this yesterday on another computer and it worked fine once I had both libgif4 and libgif-dev installed. The problem is that I've got both of those packages installed on this computer and I still get the error.
View 6 Replies
View Related
Feb 13, 2011
After finally figuring out how exactly how to compile something from source, I did it with Wine. However, there's a problem, when I'm trying to play a game on Steam (Half-Life) on a TNT2 graphics card (With NVIDIA drivers 71.86 installed as well as all of the packages needed to compile Wine from source), everything either lags or has an error.
One of these errors is that OpenGL32 isn't being initialized after attempting to start the game in that mode. Another error (or I should say problem) is that in Direct3D mode, it just.. crashes lol. Also, in Software mode, it LAGS horribly and I don't think it has to do with the hardware limitations I have on this machine. I did however install the glx and gl drivers AFTER I compiled Wine, do I have to do yet another install?
Debian Lenny 5.0.8
667MHz Celeron Coppermine
NVIDIA TNT2 32mb VRAM card
View 3 Replies
View Related
Oct 20, 2015
I have already open a thread in scribus forum but I am not sure if they know the solution, and I don't think is specifically related to scribus. I am receiving a generic unknown cmake error with QT5 library when try to compile Scribus 1.5, probably I need to install some library more but which?
Code: Select allcmake ../scribus -Wno-dev -DCMAKE_INSTALL_PREFIX:PATH=/usr/local/bin/
CMake Error at styles/CMakeLists.txt:21 (QT5_WRAP_CPP):
Unknown CMake command "QT5_WRAP_CPP".
-- Configuring incomplete, errors occurred!
See also "/home/myuser/Compilati/scribus-1.5.0/builddir/CMakeFiles/CMakeOutput.log".
myuser@Debian-635:~/Compilati/scribus-1.5.0/builddir$ cmake ../scribus -Wno-dev -DCMAKE_INSTALL_PREFIX:PATH=/usr/local/bin/
CMake Error at styles/CMakeLists.txt:21 (QT5_WRAP_CPP):
Unknown CMake command "QT5_WRAP_CPP".
-- Configuring incomplete, errors occurred!
View 14 Replies
View Related
Feb 15, 2014
I'm trying to install the calculator Qalculate from source so I download the tar.gz package for KDE from their official website to my ~/Downloads folder. I unzipped it with
Code: Select all tar xzf qalculate-kde-0.9.7.tar.gz
I moved the exploded folder to my /home/guest/ folder (my user-name is guest), I entered the qalculate-kde-0.9.7 folder and searched for a INSTALL or README file. Here's what the INSTALL file says to do. The INSTALL file says to run the following commands
Code: Select all./configure
Code: Select allmake
Code: Select allmake install
Code: Select allmake clean
After giving the first command, trouble started; here's what I got:
Code: Select allroot@aliquis:/home/guest/qalculate-kde-0.9.7# ./configure
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking target system type... i686-pc-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking for -p flag to install... yes
[Code] .....
This is impossible, as I am running a fully functioning kde system. What should I do? I don't find the kde version of Qalculate in Apper...
View 9 Replies
View Related
Apr 19, 2011
I'm trying to install the rt2870 driver on my server running Ubuntu Server 8.04. I've installed build-essential, checkinstall, cvs, subversion, git-core, mercurial... After uncompressing the tarball, doing a "sudo make" gives me this output:
[Code]...
View 9 Replies
View Related
Apr 25, 2010
I am trying to install MySQL by compiling source files.Using mysql-5.1.46]version./configure --prefix=/usr/local/mysql was fine and I am getting following error while "make"
[Code]...
View 2 Replies
View Related
Feb 2, 2010
how to uninstall Mplayer and other programs that is installed by compiling source files(./configure, make , make install)
View 14 Replies
View Related
Apr 3, 2010
Can someone please tell me what packages are required for compiling source on Slack 13? Something is missing in my box and I get errors, I can't figure out what it is.
View 11 Replies
View Related
Jun 12, 2011
I was attempting to reformat a 16GB MicroSD card in my camera when the battery died mid-way. After that, any time I try to read the card in my camera, it gives me a "Card Error" and does not allow me to reformat it in my camera.
So, I thought I would plug the camera in to the laptop with it set to host the card as media when plugged in as USB, in an attempt to fix the formatting issue.
However, when I plug it in to my linux machine, it does not register as a device (e.g., /dev/sda) due to some errors, therefore I cannot reformat it. Essentially, I think I need to fix the partition table but I'm not sure how to when it doesn't register as a device. code...
View 7 Replies
View Related
Aug 29, 2010
I am trying to install form source (gnome-voice-control-0.4.tar) the voice recognition tool. ./configure seems to go fine, the Makefile has been made bur when I try to install by typing make some errors appear.
code:
Quote:
[root@piotr gnome-voice-control-0.4]# ./configure
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes[code].....
View 9 Replies
View Related
Sep 20, 2010
trying to compile and install wxGTK-2.4.2,i configure with the line-./configure --with-gtk --enable-gtk2 --enable-unicode but when i go to make and make install i get the format not a string literal error, how can I fix this? really need wxGTK2.4 for some old apps.
View 1 Replies
View Related
Oct 11, 2010
is there anyway to get zenity 2.32.0 installed on lucid besides compiling it from source? because i noticed it was available for maverick.
is this version likely to be available for lucid?
View 1 Replies
View Related
Mar 20, 2011
When I compile evince from its source code, I am able to run ./configure properly, but when I run make the following output is displayed.
Code:
make all-recursive
make[1]: Entering directory `/media/New_Volume/untitled folder/evince-2.32.0'
Making all in cut-n-paste
make[2]: Entering directory `/media/New_Volume/untitled folder/evince-2.32.0/cut-n-paste'
Making all in zoom-control
make[3]: Entering directory `/media/New_Volume/untitled folder/evince-2.32.0/cut-n-paste/zoom-control' .....
make[3]: *** [libevview.la] Error 1
make[2]: *** [all] Error 2
make[1]: *** [all-recursive] Error 1
make: *** [all] Error 2
I am not able to ascertain the source of this error, even though I seem to have the file in question-libevdocument.la. What do I do now to remove this error?
View 8 Replies
View Related
Mar 21, 2011
Code:
anisha@linux-uitj:~/junk> ls -R
.:
include src
./include:
template0.h template0.h~ template0.h.gch
[code]....
View 11 Replies
View Related
Aug 19, 2010
Is there a startup option I can put in the /etc/init.d/mysqld script or an option in the /etc/my.cnf file to enable the Archive engine for MySQL or do I have to compile it from the source?
[Code]....
View 1 Replies
View Related
Jun 18, 2011
In order to configure a dual display in a fresh 11.4 installation, I am attempting to install the nVidia driver according to the instructions in SDB:NVIDIA the hard way - openSUSE. I have not previously compiled or configured a kernel so I largely followed the instructions from OpenSUSE 11.2 - How to compile a Kernel for Newbies.The currently installed kernel is 2.6.37.1-1.2-desktop. The graphics card is an ASUS EN9600GSO (512MB).
In Yast, I installed gcc, make, kernel-devel (v. 2.6.37.1-1.2) and kernel-desktop-devel (v. 2.6.37.1-1.2). Per the "hard way" instructions, I did not install kernel-source.
View 9 Replies
View Related
May 17, 2010
I'm trying to install the Avant Window Navigator by compiling the source files and installing that way. I've extracted the file avant-window-navigator-0.4.0.tar.gz, but when I run the ./configure command, I get an error.
Code:
configure: error: in `/usr/src/avant-window-navigator-0.4.0':
configure: error:
Could not link test program to Python. Maybe the main Python library has been
installed in some non-standard library path. If so, pass it to configure
[Code].....
View 4 Replies
View Related
Jul 19, 2010
I recently installed Fedora 13 on my system, and I'm still in the process of setting it up as I like. As the FCEU and snes9x versions on rpmfusion are old (fceultra 0.98, snes without GUI), I wanted to compile my own RPMs Everything went OK, but I found myself having to build the packages several times because of missing LDFLAGS. I got several errors like "symbol X missing, it was found on Y so you may want to add Y to the linker flags", which I fixed by modifying & exporting LDFLAGS.
So, 2 questions:
1.- why are the LDFLAGS missing? How can I avoid having to set them up manually?
2.- There should be a way to avoid re-compiling the source and only run the rpm packaging stuff with the already built things (some option like 'don't build, only package'). how can I do that?
BTW, I can share my (pretty much hacked) .spec files if you are interested
View 8 Replies
View Related
Aug 18, 2011
Below is the recipe I've used to compile dwm from source on Squeeze
su
apt-get install devscripts debian-keyring
apt-get build-dep dwm
exit
It all seems to work, however debuild gave an error about secret keys. Is this a sensible procedure? What happens in the (probably unlikely) event there is another source patch?I've gone to a tiling window manager as the result of the purchase of a wide screen LCD monitor. I like to have some stuff down the right hand side when running Firefox and OpenOffice in the main panes. Any configuration tricks welcome. Modern screens are the wrong shape!
View 6 Replies
View Related
Jun 5, 2011
Just switched over to Ubuntu 11.04 32bit. I have spent the day configuring it to my likings, and am content with Ubuntu. I have zero experience with coding, and bare minimum knowledge. Anyways, I have gotten some tar.gz files, that I have extracted them into folders, and then in terminal I run ./configure, and then I get the error "You need intltool 0.40.0 or later".
View 2 Replies
View Related
Nov 6, 2010
About a year ago, I decided to remove the battery of my laptop when no mobility were required and the machine could use A/C, in order to --supposedly-- extend the battery's life.The system has suffered a couple of improper shutting downs within this year and, despite no important information was lost and I have not noticed a single problem, I don't know what to do after one. Yesterday, while I was testing some hard disk checking tools, I noticed that there was a damaged sector on the disk. Is it a result of these improper shutting downs? Should I force a file system check after one? Does the system performs a file system check when the error is critical? Should I check the lost+found directory after an improper shutting down --it's empty, by the way?What's the recommended way to proceed after an improper shutting down?
View 7 Replies
View Related
Aug 5, 2010
I am trying to determine best method for monitoring filesystem for invalid file permissions, 777 or on NFS share but owned by root etc.
View 2 Replies
View Related
Aug 25, 2010
Are there any tools out there to scan, say our fileserver(20TB), to check for things that shouldn't be there like mp3s, videos, software crackers, etc?
View 2 Replies
View Related
Dec 28, 2009
I have just upgraded the hard drive in my laptop with a new one that isn't about to crash (I dropped the laptop a few months back). After installing Fedora 12, the first thing I did was try to install kmod-nvidia and all its dependencies. Upon rebooting Fedora goes to the boot splash, and then when the login screen should display it instead shows a blank black terminal like screen. Do diagnose this I logged in under terminal (tty3) and proceeded to try to start X manually. It displayed an error to the effect of 'could not load Nvidia kernel module Nvidia_module.so3'. I figured it must have been a glitch so I reinstalled kmod and the same thing happened. Tried reinstalling Fedora all together and still the same result. I am getting kmod from the RPM Fusion repo
View 3 Replies
View Related
