i just got ubuntu and starting using it as i was learning basic ruby programming for two weeks. suddenly now everytime i open my computer it doesn't give me the choice of weather i would like to use windows or ubuntu like it normally does. any ideas on how i can fix that? all my ubuntu files are still on my computer so it wasnnt removed.
View 1 RepliesI'm having sporadic issues with the openoffice.org program. Sometimes, power point presentations will crash the program and then I can't open any open office programs without rebooting the computer. The problem seems to be just with powerpoint files and I'm not sure what the issue could be.
View 7 Replies View Relatedeverytime i click on computer icon on my desktop an error message pop up: Could not display "computer:". Nautilus cannot handle "computer" locations.
same problem with trash: Could not display "trash:". The file is of unknown type
is it because i try to install softice in wine? by the way im using ubuntu 9.10 netbook.
Is there a way to open Computer with super key + E?
I'm just used to opening My Computer with Boss key + E in Windows. Oh, and I'm on Natty.
I have a small netbook that I would like to use as a terminal for my main computer, so instead of opening Gnome-terminal on my computer it will run from my netbook.
what i want to know is how to ssh from my netbook into my main computer and run an application on that computer.
So i would like to be able to ssh into my computer, and when i type "vlc movie.avi" it will open and run on the REMOTE computer just as if i had opened gnome-terminal and typed the command there.
Note: I'm not looking for something/anything like "ssh -X" or VNC or Remote Desktop.
Ubuntu 10.4 64bit. I accidentally deleted the computer icon from the desktop. How can I replace it?
View 3 Replies View RelatedUsing connect to server in 10.04, service type SSH (sftp) from the places menu. This shows my folder and I can double-click pdfs, text files etc from Nautilus. But.... if I try to open an ods or odt file it opens the archive manager. It also fails if I open from within OOo. It used to work but has recently stopped.As an aside, if I export the share via NFS and access it that way, then everything works OK.
View 2 Replies View RelatedI have recently installed fedora 13 on my desktop, it is ibm hardware, an older 1 gig processor, it is a full install, it functions fine but with one problem. The ethernet card is functioning, however the only web pages I can get to come up is the fedora stuff I believe comes with it. I have looked at the forums and guide and they all say it should connect itself and be good to go, it has found the connection, but cant find anything on the internet. I have two computers connected to a router, when running windows both connect just fine. When I switch mine over to fedora it will not open any web pages, gives me a "cant find the server" message. I have tried several things including changing settings and manually setting IP addresses and mac addresses, nothing has worked.
View 2 Replies View RelatedThe problem started when I noticed I couldn't upload to people using a torrent downloading program, the program listened on port X and when I sniffed on the same port I saw that syn's are forwarded correctly from my nat to that port but the program doesn't relate to those packets. Then I listened with NC, and even on another port nothing is being answered to those syns packets.
View 3 Replies View RelatedWhen the custom animations added to my presentation exceeds an amount and i run the preview, my computer freezes. I have never had such problem with microsoft's office. I have open office 3.2 on ubuntu 10.04. my system has 4GB of of ram, core i5 430m cpu with integrated intel graphics. is this phenomenon natural? is it duo to my system limitations or it's an open office bug? what could i do now?
View 1 Replies View RelatedI cant get cups to open on my computer http://localhost:631/ wont open for me either.
View 2 Replies View RelatedI have since switched to Fedora 12 (still on the same computer) and I realize I made a dyslexic mistake earlier, I referred to the hardware as 4537 rather than 4357. Here is the Broadcom page for Linux Wireless driver: [URL]... I've tried following the instructions in the readme in the archive but to no avail. More details on this if I try to do it exactly as it details in there. my current browser on my internet computer can't open weblocations with the git protocol.
View 1 Replies View RelatedAre there any Computer Algebra Systems in the Ubuntu repositories that are GUI (and preferably GTK+) based and open source, as well as capable of graphing (and in 3D)? That being: A complete FOSS competitor to Microsoft Student.
View 5 Replies View RelatedI am using nx client and I would like to ask your help. Is it possible when I connect from home to my work's computer (using nx client) to see the exactly same desktop-taskbar and open programs as I left them in my work computer.
Imagine that you are at work using your computer. You lock the keyboard and you go home(you didn't turn it off). You go home and you login to work's computer. What I want to see is the same if I was just unlocking works's computer. IS that possible and how?
When I open my ''computer'' i keep on getting a ''block from Software Manager - Available Software updates - Vodafone''. remove it so that I dont get that message again.
View 2 Replies View Relatedso tonight i put a pc game in to install with wine, and after a few seconds i checked my desktop to see if it was mounted. nothing was there so i went to main menu>places>computer and i get this message every time i try: 'Nautilus cannot handle "computer" locations' and nautilus just doesnt open. i can however, browse every other folder in my system except computer. i only just noticed this today, so i dont know how long its been like this, and i dont think i installed anything to mess it up. and im not sure why the cd isnt mounting, because yesterday i ripped an audio cd into rythmbox with no trouble.
View 1 Replies View RelatedI have three computers in my network, but two will be mentioned. Computer A is a Linux Mint 9/Windows 7 dual-boot, and I have just installed Mandriva Free 2010.2, which I will call Computer B.
Now my main problem is that Computer B, while it can see and access Computer A's shares as well as the third computer, the aforementioned computers cannot access Computer B. The message was: "Unable to mount location/Failed to mount Windows share." Now, the SMB protocol was used because of the third computer and Computer A have Windows OSs installed in them.
What I originally wanted was that I can share Computer B's NTFS partition, namely Documents and Downloads, to the other computers. And I can't do that, because of the error message.
What I can do, however, is use Computer B to view shares from the other two computers (Computer A, as an example). By my experiences in Linux Mint, I understand that I'd have to mount my Windows partitions in order to share them. I don't even know if my NTFS drive in Computer B is mounted, though that is what was described.
Here's the situation:
I have Ubuntu 9.1 with wubi and Vista on my laptop. I was playing my laptop through the TV, then I tried to switch it back to computer control and the computer went black. I had to hold to power button to restart, and suddenly grub4dos starts up when I try to launch ubuntu. I can still launch Vista. Is there anything I can do to save my system? At the very least, I would like to be able to copy data from my ubuntu system to my vista system. How can I do that? I can't find C:/ubuntu/disks. It doesn't seem to exist.
so here's my problem. I am trying to install windows xp on my computer in virtual machine so i can watch netflix on my computer. The disk will not start up, if I restart and try to boot from load i just sits there and says boot from cd. The disk drive plays music cd's fine, so i dont really know what the issue is.
I dont know that much aboutut ubuntu. a tech friend put it on hard drive he gave me after mine crashed. also i should ad that i took the disk to someone else's house that haswidnows installed and the disk worked just fine, so its not a disk problem
I set up a dhcp server in the lan and assigned static ips to two computers, computer A and B, according to their mac address. Everything was running fine. But when I turned off computer A, connected computer C to the network, and assigned computer A's static ip to computer C without changing dhcp setting. Computer C was able to access the internet. When I turned on computer A, dhcp couldn't assign an ip address to it, and computer C showed an error message of ip conflict and failed to use internet. I wonder if dhcp server is able to prevent other computer from using the same static ip that is already assigned to a computer according to its mac address.
View 5 Replies View RelatedI've been trying to find a way to watch videos from my main desktop computer on another computer I've plugged into an HDTV. I'm such a Linux newbie that I decided to give Mythbuntu a try. It was way to complicated for what I needed, and I'm sure that some more experienced people reading my first two sentences laughed to themselves at my naivety.
What I am trying to find is simple: browsing one computer's home folder from another computer, and playing the videos therein. If there's anything like Mythvideo that requires less than half of the skill requirements, I will telepathically send love to the person that informs me of it.
1. How can I stream music from my ubuntu computer (9.10) to my windows computer using vlc?
2. What nvidia driver should I use? The one found in "hardware drivers" is 185 but nvidia's site has 190! which one should I use?
i have 2 computers.both have pidgin messenger with the same accounts (yahoo, msn, aim, facebook...). both can connect at the same time. both connect at startup.both work well.some of the chat protocols disconnect upon sensing multiple connections (as in, when one account signs in from two places).good.others don't.bad.
is there a way to remotely disconnect the OTHER computer's pidgin while using the current computer? while both instances of pidgin are running, the OTHER computer will see all incoming messages on pidgin. anyone at that computer will see a one-sided conversation.simple solution would be to stop them from connecting at startup. that still doesn't solves the problem of "what if i forgot to turn one off" or "what if someone runs pidgin on the other computer."
My wifes networked computer connected to the network just fine when it was Win XP. Now that Ive converted it to 10.04 (completely) it can see the network, but it just wont connect to it. I had no problem converting my computer to Ubuntu and it sees the network and accesses it great. Files, folders and hard drives are all shared. So, one computer connects great, the other does not.**I dont know what to do at this point.Here is the layout:My Comp (10.04) ---------......Main Network Comp (XP)Wife Comp (10.04) -------/The main network computer is XP as it has software on it we need that does not work in Wine. The main computer will have to stay XP. I cannot get my wifes computer to connect to the main system, although mine connects just fine. I dont know what the problem is. Her computer sees the network, but when trying to connect, it times out and says unable to connect.
View 2 Replies View RelatedI have two Linux computers and one small home router with DHCP functionality. I configured the router with the "dynamic DHCP" setting, ie, the static DHCP with MAC-Address was not used. Before that, I used the manual IP configuration, defining the two computers' names in the /etc/hosts file.
Example:
10.0.0.2 comp2
10.0.0.3 comp3
Now, with DHCP, the above example is no longer appropriate, because the DHCP server is supposed to tell the computer what IP number it will receive. However, I am missing something, because I haven't figured it out yet how to make one computer know the other computer's name. Is it that I haven't installed a name-finding package? Is there a simple way to accomplish this (one computer finding the other computers' names)?
I have ubuntu server installed on a pc. The motherboard died, so I switched the HD to another computer. Everything is fine except the network. I cannot access this computer from other computer (while it was possible before). I looked at the interfaces and everything seems fine. The nic itselft seems to work too.
View 1 Replies View RelatedI am wanting to make traffic pass through my computer to another computer.
Here is my current network setup:
[WAN] > [MODEM] > [10.1.1.3] > [192.168.56.101]
How can I make my computer ([10.1.1.3]) forward incoming traffic on port 25 to [192.168.56.101]?
for christmas my parents got both my younger sister and i acer mini computers, model d250-1958. my sister was trying to change her password that lets herself as a particular user log in. somehpw she messed up the password and its not what she thought it was and now she doesn't have any way of accessing anything. i thought that there might be an ovveride system or a reseting trick. i've looked in the manual but cant find anything of the sort for either of the two options.
View 5 Replies View RelatedI am using fedora 10 in two computers. Just for my own practice I sent a file to my second computer.
1st computer IP is 192.168.1.10
2nd computer IP is 192.168.1.20
[Code]....
The file has been successfully copied to the second computer but I again want to copy that file into my local computer by still sitting in my 1st computer.
[Code]....
I ran across a cool program that I would like to try out called x2x, which for those who don't know allows me to use the keyboard and mouse from one computer on another computer. Just google it and you'll find explanations better than that, but you get the gist?
Anyhow, I've installed SSH server and x2x on the computer that I want to control (laptop) and on the computer that I want to use to control the laptop (workstation) I stuffed into a terminal the following:
Code: ssh -XC riley@riley-Eee x2x -east -to :0.0 which, riley@riley-Eee does in fact refer to the laptop that I want to control. All I get back out is: Code: ssh: Could not resolve hostname riley-Eee: Name or service not known even though both systems are on the same router. I would assume that it should work right away no problem, but it doesn't. I don't understand SSH very well (or networking in general) so I'm wondering if someone knows how to step-by-step me through getting it to work.