I want to install Ubutn-Server-9.04 on a disk.
This old windows-used disk has three patitions:
1 # -- Primary NTFS
2 # -- Logical NTFS
3 # -- Logical FTA32
I plan to install Ubuntu on 1# Partition and override the old OS-Windows7. but the Data on 2# and 3# partition can still be preserved?
I started withsda1 windows restore sda3 extendedsda5 swapsda6 /mandrivasda7 /SUSE 11.3
sda8 /SUSE 11.2I then made some changes with gparted (from PartedMagic 5.5) to create an ntfs partition to simulate a condition where someone may want to delete that partition and use the free space for linux. I then deleted that partition, sda2 then sda5 (swap) and taking some screenshots, went about resizing partitions to use that free space and then recreate swap. the intention being to create a basic guide on how to go about this.I have previously only had my swap at the end of the extended partition, deleting itand recreating it later had caused little trouble.I realize that a resize/move operation would have been a better choice.What I was not expecting was the partition number changes that occurred.
Code:
root@PartedMagic:~# fdisk -l
Disk /dev/sda: 80.0 GB, 80026361856 bytes
[code]...
After fixing drive partition numbers, I got the following error from cfdisk: Code: FATAL ERROR: Bad logical partition 6: enlarged logical partitions overlap Press any key to exit cfdisk However, I can see all my partitions with fdisk and gparted, I can mount and use all of them.I used the following guide to fix the drive numbers order: Reorder partition drive numbers in linux | LinkedBits Does somebody know whet is cfdisks problem and how can I fix it?
View 6 Replies View RelatedI have Fedora Core 8 installed. I would like to reinstall it so as to get back commands that have been lost. To preserve my user data that has been stored in logical volumes, what selections should I make in the installation process? Are these selections essentially the same for Fedora Core 10?
View 5 Replies View RelatedI installed Debian stable and I see these errors in the xsession error file
/etc/gdm3/Xsession: Beginning session setup...
GNOMEKEYRINGCONTROL=/tmp/keyring-j0E6Br
SSHAUTHSOCK=/tmp/keyring-j0E6Br/ssh
GNOMEKEYRINGCONTROL=/tmp/keyring-j0E6Br
[code]....
Around 2008 i seem to remember PartEd on the command-line was able to rescue deleted partitions and gave a choice of whether to recover the partition as a Primary or Logical Partition. I have tried testdisk but didn't really grok what i was doing. I successfully moved a "Windows Recovery" partition to the end of my hard-drive, immediately after the drive's Extended Partition.
View 3 Replies View RelatedI installed fedora 13 64 bit and it works great but I encountered several issues when setting up guest OS with KVM. The problem seems to be related to selinux. But let me first ask question about logical volume. By Default fedora created logical volumes:
[Code].....
"If you expect that you or other users will store data on the system, create a separate partition for the /home directory within a volume group. With a separate /home partition, you may upgrade or reinstall Fedora without erasing user data files." seems to suggest I have to create a separate physical partition and assign that to /home. But reading elsewhere it seems to suggest logical volume acts like a partition. My goal is to make it easy in case fedora is hosed and I have to re-install it without affecting /home where my cirtical data resides. Given above do I need to create a separate physical partition or I am just fine?
I have a second hard disk that originally had windows and all my data. Windows is hosed but I can see my data from within Fedora and Windows is gone and I created created new partition in its place which used ot be the C:/ drive appears as 53 Gb filesystem. My data which was originally D drive appears as 215 GB filesystem. As given in [URL] I want to create a new logical volume in 53 Gb filesystem which I want to use as space for virtual disk to install guest OS's in KVM. Currrently 53 GB filesystem is mounted as /media/3467BH89JK789 but this does not work well with KVM. how do I create this logical volume out of 53 Gb filesystem partition and add proper selinux info and do I add to vg_vostrolx volume group and in a different volume group?
Fedora 14 xfce
I have the following partition setup. I would like to know how can I convert the logical partition sda6 to a primary partition.
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code].....
I would like to convert sda6 to a primary partition, the reason for this it to install windows 7 starter.
I would like to create Logical partition in Extended partition using fdisk in Fedora 14 I created extended but fail to create logical partition.
View 6 Replies View RelatedI want to install more than 3 linux distributions on single disk - my test machine.Is it possible to create boot partition on logical partition whitch resides in extended partition (and boot successfuly of course)?
My boot loader lives elswere (primary partition or MBR).
I recently resized one of my Logical Volumes that contained 160MB data from 500MB to 6.5GB. After resizing it, I checked the size of the data via 'du -sh' and found that my data had reduced to 143MB.
Fortunately, I backed up the the 160MB of data on another partition before resizing the Logical Volume. I ran 'diff' on both directories holding the 160MB and 143MB, but there was no difference detected.
how come there is a 17MB difference after resizing?
In case you're wondering how I performed my resize, this is what i did:
e2fsck -f /dev/VolGroup01/LogVol00
lvextend -L +6G /dev/VolGroup01/LogVol00
resize2fs -p /dev/VolGroup01/LogVol00
I've just upgraded from F9 to F10. I can boot okay but I seem to have lost some data in one of my logical volumes. My drive is organised as follows:
/dev/mapper/main_group-various: UUID="f7c452cf-9f03-4f97-8676-b71b07a812aa" TYPE="ext3" SEC_TYPE="ext2"
/dev/mapper/main_group-root: UUID="173f1845-72c9-49e8-9d49-2a5776c4267c" TYPE="ext3" SEC_TYPE="ext2"
/dev/mapper/main_group-music: UUID="f5411861-4614-4652-a5f5-a3a8c2efcdd3" TYPE="ext3" SEC_TYPE="ext2"
[code].....
The logical volume for work still seems to be there. I presume (and hope) that all the information in /dev/main_group/work is still there. How can the folders in /dev/main_group/work be retrieved?
I want to give Mandriva 2010 a shot, and I want to resize my 500gb /home partition (logical) to make some room. It's an ext4 partition. Do you reckon I'll be safe resizing it from the Mandriva installer? or should I use an Ubuntu LiveCD first?
View 2 Replies View RelatedI deleted Ubuntu partition from Windows and it deleted one of the LOgical partition(used for Data storage) along with it.Anny ideas how to recover that Logical partition?Windows disk manager now displays that partition as 'FRee Space'
View 2 Replies View RelatedI've installed wubi on my D: partition of a vista os. Vista is installed on the C: I can see the vista partition if I mount it but can only see the wubi 10.04 system files on the data partition (D: ). No option to mount it either. Also curious to know if its possible to automatically mount the c: on startup.
View 3 Replies View RelatedWe have made a fresh installation on DL 580 G 5 Server. The installation Completes successfully. When we reboot the server we find an error message " Logical Drive Disable due to Possible Data Loss. and then non system disk or disk error.
Due to this we have lost all of the data. We can successfully install Windows Server 2008 or 2003 or Redhat Enterprise Linux 5 on this server with no error no issue.we can successfully install Windows Server 2008, 2003 or RedHat Enterprise on RAID 5 or RAID 6 Or RAID 1 or RAID 1+0. we dont face any issue on these windows or linux platforms.We are only facing RAID Controller Issue on CentOS 5
This is my partition table....(in the image) Now I would like to install windows in the unpartitioned space after a long time..... I tried but could not do that. I understood that Windows needs only primary partitions!
So I tried to convert this logical one into primary, but of no use... Is it possible to convert that unpartitioned space which is under logical drive to a primary one!
I have a logical partition formatted with NTFS and created (from Windows) after Ubuntu 9.10 was installed. It's name is "Volume". Now, it doesn't show under places nor nautilus. I think it is shown when using the Live CD again. It is shown in Volume Manager. How can I have it show up next to my other partitions?
View 9 Replies View Relatedi'm trying to install windows 7 and after googling around found that marking the partition as primary would do the job.. so how to do it??
View 4 Replies View RelatedI'm running Ubuntu 10.10
I have been running a dual boot system for a while now and I haven't logged onto the Windows side for quite a while. I'm ready to whack it.
What I want to do is get rid of sda1, sda2, sda3 partitions(all Windows related) - migrate my Linux install(sda5) to a Primary partition, migrate the swap out of the extended partition, and then make everything else my "data"(ext4) partition...so basically go to 2 primary partitions and a swap.
I know how to ultimately get to my one big "data" partition, but the part I'm not so sure or comfortable with is whacking the current Primary partitions and migrating the Ubuntu install to the new primary partition.
Device Boot Start End Blocks Id System
/dev/sda1 1 13 102400 de Dell Utility
Partition 1 does not end on cylinder boundary.
/dev/sda2 * 13 1926 15360000 7 HPFS/NTFS
[Code]....
Today due to losing one of my partitions (I call it here P1) by installing windows xp, I recovered it by "Parted" P1 was a logical partition but now P1 is marked as a Primary one
View 9 Replies View RelatedI'm trying to convert big ext4 partition to logical. I was able to do that with Arconis Disk Director Home 11 with swap and ext3 partition, but it doesn't recognize ext4.
Unfortunately I can't copy 2TB data to another HD Now I have:
Pri /boot ext3
Log / ext3
Log swap swap
Pri /media/X ext4 <- 2TB
When I do that I be able to install Ubuntu Server next to CentOS. And I will add partition /home(ext4) for both and "/"(ext4) for Ubuntu.
My disk partitions are as following:
Disk /dev/sda: 60.0 GB, 60011642880 bytes
255 heads, 63 sectors/track, 7296 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x58b258b2
[Code]....
There already exist an os XP before my installing of ubuntu.When I installed my ubuntu 9.10, I selected to install grub2 on the logical partition sda7. But when I typed command sudo dd if=/dev/sda7 of=mbr bs=512 count=1, I found that the file mbr was eerily full of zero bytes. How does this happen? Or grub2 can't be installed on a logical partition? But it works very well along with win7 rather than XP.
Problem:Here's what I had, they basically needed to switch places.C: Windows Primary (The contents of this was my boot partition)D: Extended Logical (I wanted this to become the primary)I googled what to do, and believe it or not it seems people really didn't have a solution besides reformatting it?We learn from our mistakes. That's why I'm posting what I did to see if someone knows a better way!What I did:First I used an Ubuntu LiveCD or 10.04. (Not .1 oh noes)Then I opened up gparted and shrank the extended partition so I would have enough room to move them around.I mounted both the C: and D: partitions and copied the data over to the primary from the logical.I deleted the logical and then moved and resized the primary!Then I flagged the primary partition boot.Well that's one way to get from logical to primary with your data
View 2 Replies View RelatedCan somebody help ma move my win partition in to a logical?
it will not boot after updating ubuntu.
Ok, here is the new log from the boot info script code...
I have a system running OpenSUSE 11.3 using the bare server configuration.I had a partition for my /srv directory. All was fine until earlier today. I shutdown my system (to remove an old floppy drive from it). When I rebooted, /srv is emtpy (no files nor directories). This is somewhat vexing, as I had several sites running from there, as well as a fair amount of data.The appropriate partition (/dev/sda3) appears using fdisk. However, there is no mention of it in /var/log/messages.Does anyone know how to recover an Ext4 partition?
View 7 Replies View RelatedI would like to resize my /home ( /dev/sdb6 ) partition - without losing data - to make room to create a swap partition (at the moment, I don't have any swap. Is it dangerous ?) IIRC, it was possible to change partition sizes from the install disk in repair mode (?) But I cannot find that repair mode on the 11.3 install disk. Has it been removed or is it somewhere deeper in the install or update process ?
[Code]....
I'm currently dual booting Windows 7 64bit and Ubuntu 10.10 each on primary partitions. Then on the other 2 partitions I have the manufacturer recovery partition (which I am not sure I should remove...), and then a partition for storage and files. Now I want an Arch Linux installation on the hard drive, but obviously I cannot create a new primary partition because I already have 4. I found out that linux can run from a logical partition (which you can have multiple of)..However I do not want to format my Ubuntu partition and I'd prefer to keep the data on there all intact. Is there a way to move my Ubuntu installation (on the primary partition) to an extended partition where I could put multiple logical partitions for multiple linux installations?
View 2 Replies View RelatedI'm using Fedora 14 x86_64.I want to take 200GB from the /home Extended-Logical Partition, and install Archlinux on it, how do I do that? In this 200GB Free Extended Space I want to create another 4 Logical Partitions for Archlinux.
View 7 Replies View RelatedI'm multi-booting with Windows 7 x64 and (at least) Linux Mint. Because I hadn't yet made a backup of my MBR, when I installed Linux Mint on a logical partition, I told the installer to put GRUB on the partition instead of in the MBR. This turned out to be useless, as I need to use GRUB from a boot disk to get into the GRUB I installed. Before installing it in the MBR, I'd like to get it out of the partition, preferably without wiping and reinstalling Linux. I don't relish the prospect of going through two layers of GRUB when I want to boot Linux. How do I get it out, or what other options are available to me?
View 1 Replies View Related
