Installation :: Move Win Partition In To A Logical?
May 22, 2011Can somebody help ma move my win partition in to a logical?
it will not boot after updating ubuntu.
Ok, here is the new log from the boot info script code...
Can somebody help ma move my win partition in to a logical?
it will not boot after updating ubuntu.
Ok, here is the new log from the boot info script code...
Around 2008 i seem to remember PartEd on the command-line was able to rescue deleted partitions and gave a choice of whether to recover the partition as a Primary or Logical Partition. I have tried testdisk but didn't really grok what i was doing. I successfully moved a "Windows Recovery" partition to the end of my hard-drive, immediately after the drive's Extended Partition.
View 3 Replies View RelatedI'm currently dual booting Windows 7 64bit and Ubuntu 10.10 each on primary partitions. Then on the other 2 partitions I have the manufacturer recovery partition (which I am not sure I should remove...), and then a partition for storage and files. Now I want an Arch Linux installation on the hard drive, but obviously I cannot create a new primary partition because I already have 4. I found out that linux can run from a logical partition (which you can have multiple of)..However I do not want to format my Ubuntu partition and I'd prefer to keep the data on there all intact. Is there a way to move my Ubuntu installation (on the primary partition) to an extended partition where I could put multiple logical partitions for multiple linux installations?
View 2 Replies View RelatedAfter fixing drive partition numbers, I got the following error from cfdisk: Code: FATAL ERROR: Bad logical partition 6: enlarged logical partitions overlap Press any key to exit cfdisk However, I can see all my partitions with fdisk and gparted, I can mount and use all of them.I used the following guide to fix the drive numbers order: Reorder partition drive numbers in linux | LinkedBits Does somebody know whet is cfdisks problem and how can I fix it?
View 6 Replies View RelatedI installed Debian stable and I see these errors in the xsession error file
/etc/gdm3/Xsession: Beginning session setup...
GNOMEKEYRINGCONTROL=/tmp/keyring-j0E6Br
SSHAUTHSOCK=/tmp/keyring-j0E6Br/ssh
GNOMEKEYRINGCONTROL=/tmp/keyring-j0E6Br
[code]....
just about to install Fedora 10 on my MSI WIND laptop and read abit about file system on Linux and come across alot of recommendations on how many logical mounts or partition to create..so far i have created /boot of 100MB.i'm unsure of what sizes i will give to my [root] / and /home and /swap
i am thinking of assigning 1GB to /swap which leaves me with 40GB left for / and /home.i'm going to install alot of softwares and probably try out wine as well.i want a separate /home directory incase i change distro then i'll keep it... where does the programs go to under?
I'd like to clone a partition, and then restore it to a logical volume. I have all three operating systems at my disposal (Mac, Windows, Linux Live CD) What is the best way to achieve this. The partition I am trying to resize is only 200MB, so I can store it on usb if need be.
View 9 Replies View RelatedI was wondering if I could make logical / partitions if I have a primary /boot partition. Is this a potential way to get around having only 4 bootable operating systems on a single HD?
View 3 Replies View RelatedI installed fedora 13 64 bit and it works great but I encountered several issues when setting up guest OS with KVM. The problem seems to be related to selinux. But let me first ask question about logical volume. By Default fedora created logical volumes:
[Code].....
"If you expect that you or other users will store data on the system, create a separate partition for the /home directory within a volume group. With a separate /home partition, you may upgrade or reinstall Fedora without erasing user data files." seems to suggest I have to create a separate physical partition and assign that to /home. But reading elsewhere it seems to suggest logical volume acts like a partition. My goal is to make it easy in case fedora is hosed and I have to re-install it without affecting /home where my cirtical data resides. Given above do I need to create a separate physical partition or I am just fine?
I have a second hard disk that originally had windows and all my data. Windows is hosed but I can see my data from within Fedora and Windows is gone and I created created new partition in its place which used ot be the C:/ drive appears as 53 Gb filesystem. My data which was originally D drive appears as 215 GB filesystem. As given in [URL] I want to create a new logical volume in 53 Gb filesystem which I want to use as space for virtual disk to install guest OS's in KVM. Currrently 53 GB filesystem is mounted as /media/3467BH89JK789 but this does not work well with KVM. how do I create this logical volume out of 53 Gb filesystem partition and add proper selinux info and do I add to vg_vostrolx volume group and in a different volume group?
I started withsda1 windows restore sda3 extendedsda5 swapsda6 /mandrivasda7 /SUSE 11.3
sda8 /SUSE 11.2I then made some changes with gparted (from PartedMagic 5.5) to create an ntfs partition to simulate a condition where someone may want to delete that partition and use the free space for linux. I then deleted that partition, sda2 then sda5 (swap) and taking some screenshots, went about resizing partitions to use that free space and then recreate swap. the intention being to create a basic guide on how to go about this.I have previously only had my swap at the end of the extended partition, deleting itand recreating it later had caused little trouble.I realize that a resize/move operation would have been a better choice.What I was not expecting was the partition number changes that occurred.
Code:
root@PartedMagic:~# fdisk -l
Disk /dev/sda: 80.0 GB, 80026361856 bytes
[code]...
Fedora 14 xfce
I have the following partition setup. I would like to know how can I convert the logical partition sda6 to a primary partition.
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
[Code].....
I would like to convert sda6 to a primary partition, the reason for this it to install windows 7 starter.
I would like to create Logical partition in Extended partition using fdisk in Fedora 14 I created extended but fail to create logical partition.
View 6 Replies View RelatedI want to install more than 3 linux distributions on single disk - my test machine.Is it possible to create boot partition on logical partition whitch resides in extended partition (and boot successfuly of course)?
My boot loader lives elswere (primary partition or MBR).
I have Ubuntu installed on my 1st HD partition and working pretty much the way I like. I need to convert this to a dual-boot system with Windows. Windows really wants to be on the first partition on the first drive, so I think I need to move Ubuntu to the 3rd partition, behind the swap partition.I could do a complete reinstall but that would take forever. Is it reasonable to just copy the present /dev/sd0a partition to /dev/sd0c, install Windows, then run the Ubuntu CD to reinstall GRUB?
I guess I could just use dd for this but it's been so long that I've forgotten the correct method for moving a whole filesystem.
I had an older PC on which I had two SATA drives and an IDE one and on the latter I had Windows 7 installed (I kept it on that drive since I'm not using Windows 7 that often, I'm primarily using Debian as my daily go-to OS), but since then I got a new PC which has no connectivity for IDE, so I had to decommision the drive, and before I did that, I backed up the Windows 7 partition (and the second partition which I used mostly for storing sofware and stuff that I wouldn't want to get wiped after a fresh Windows install) using dd.
Not reading up on this on the internet, doing so with the intention to restore the partition image on the same spot on the disk, but since the SSD is larger than the IDE drive, I made the partitions on it bigger, so there's no chance the Windows 7 partition to be on the same spot on the disk. I tried booting into Windows 7 from GRUB after it successfully detected the Win7 install on the second partition on the SSD, but it just leaves me with a blank screen with a blinking white cursor, so I'm guessing it's not going to fly again. So my question to you: is it possible to ressurect the Windows 7 installation, avoiding having to reinstall Windows? (which would severly complicate things, having to backup and wipe the Debian install I have on the first partition...)
So far I've tried this to fix the Windows 7 install by pointing at the right disk "coordinates": [URL] ...., but I can't seem to get it to work, all I get is some error in regards to not being able to detect the disk's geometry (I think it was the number heads I couldn't figure out to input in the command line), so I couldn't fix it.
I want to move my home directory to a separate partition so I can install the new versions of Ubuntu without losing my data. And while I'm at it, what other important directories should I move to separate partitions? And how do I do it? I'm guessing that the /boot directory should also be moved to its own partition too, yes? Because it has the GRUB in it, and if I removed Ubuntu to make way for a newer version of Ubuntu, I'll just get an error because the computer can't find the GRUB that doesn't exist anymore, right? And also, if I move those important yet-to-be-listed directories to their own separate partitions, how large should those partitions be?
I don't want to miss out on the upcoming Lucid Lynx (If it will work in the first place, of course ) By the way, I have an Ubuntu-Windows XP dual-boot system. I'll attach a screenshot of my partition table from GPartEd. You can see that I have about 300 GB. The largest partition is Ubuntu.
As mentioned here I am planning on installing with encryption. This involves using LVM in the partition scheme.
I am following this guide here which uses Mandriva to do the installation. [url]
However, I notice that GParted doesn't seem to have any support for LVM, which is going to be a pain in the rear if I subsequently try to add Ubuntu to the Mandriva boot setup.
The problem I have with DiskDrake (Mandrivas partition editor) is that it only seems to be able to put partitions at the beginning of the drive and it doesn't seem to be able to move partitions. e.g. if I want to create a new partition at the end for swap and leave some unallocated space in the middle for my future Ubuntu installation I am stuck. GParted allows me to create at the end or effectively move it by resizing the beginning and end of the partition.
DiskDrake allows me to create and edit LVM partitions.
Is there perhaps another partition editor that does both? Or maybe a development version of one that does it? Or some option I am missing?
I have a Wubi install of 10.04 in my C: partition. I had given it 20GB of space but over the months my C: has become almost full, so I need to move the Wubi install to another partition (say E. I looked around for instructions on how to do it, but I could only find instructions for grub-legacy (that ask you to modify C:/ubuntu/disks/boot/grub/menu.lst) and not grub2 (which doesn't have menu.lst) used by 10.04.
how to move a 10.04 Wubi install to another partition in Windows is appreciated. Kindly note that I'm not trying to remove Wubi and convert it to an actual installation, but rather simply move it to a different location in Windows.
I have just spent dome time using gparted to sort out my partitions. I have a vista partition, a fedora one and a big chunk of unallocated space I wish to use as my data drive.
I want to move my ~ folder to the new partition and have windows/vista access the folder and write to the Documents, Downloads folders etc.
What is the best format to use?
Also I plan to start backing up my partitions to a server, for instance using g4l to save a linux image (maby a windose one too). Is there any benifit in keeping all the hidden files (ones starting with period '.') i.e moving the whole ~ folder or would I be best off leaving the ~ dir and moving the folders I know i use such as ~/Downloads, ~/Documents etc?
And how should i preform the move of all these files? 'mv'? do i need to add any special options?
I'm rearranging a bunch of disks on my server at home and I find myself in the position of wanting to move a bunch of LVM logical volumes to another volume group. Is there a simple way to do this? I saw mention of a cplv command but this seems to be either old or not something that was ever available for linux.
View 2 Replies View RelatedI want to give Mandriva 2010 a shot, and I want to resize my 500gb /home partition (logical) to make some room. It's an ext4 partition. Do you reckon I'll be safe resizing it from the Mandriva installer? or should I use an Ubuntu LiveCD first?
View 2 Replies View RelatedI deleted Ubuntu partition from Windows and it deleted one of the LOgical partition(used for Data storage) along with it.Anny ideas how to recover that Logical partition?Windows disk manager now displays that partition as 'FRee Space'
View 2 Replies View RelatedI'm using Fedora 14 x86_64.I want to take 200GB from the /home Extended-Logical Partition, and install Archlinux on it, how do I do that? In this 200GB Free Extended Space I want to create another 4 Logical Partitions for Archlinux.
View 7 Replies View RelatedI'm multi-booting with Windows 7 x64 and (at least) Linux Mint. Because I hadn't yet made a backup of my MBR, when I installed Linux Mint on a logical partition, I told the installer to put GRUB on the partition instead of in the MBR. This turned out to be useless, as I need to use GRUB from a boot disk to get into the GRUB I installed. Before installing it in the MBR, I'd like to get it out of the partition, preferably without wiping and reinstalling Linux. I don't relish the prospect of going through two layers of GRUB when I want to boot Linux. How do I get it out, or what other options are available to me?
View 1 Replies View RelatedThis is my partition table....(in the image) Now I would like to install windows in the unpartitioned space after a long time..... I tried but could not do that. I understood that Windows needs only primary partitions!
So I tried to convert this logical one into primary, but of no use... Is it possible to convert that unpartitioned space which is under logical drive to a primary one!
I have a logical partition formatted with NTFS and created (from Windows) after Ubuntu 9.10 was installed. It's name is "Volume". Now, it doesn't show under places nor nautilus. I think it is shown when using the Live CD again. It is shown in Volume Manager. How can I have it show up next to my other partitions?
View 9 Replies View Relatedi'm trying to install windows 7 and after googling around found that marking the partition as primary would do the job.. so how to do it??
View 4 Replies View RelatedI'm running Ubuntu 10.10
I have been running a dual boot system for a while now and I haven't logged onto the Windows side for quite a while. I'm ready to whack it.
What I want to do is get rid of sda1, sda2, sda3 partitions(all Windows related) - migrate my Linux install(sda5) to a Primary partition, migrate the swap out of the extended partition, and then make everything else my "data"(ext4) partition...so basically go to 2 primary partitions and a swap.
I know how to ultimately get to my one big "data" partition, but the part I'm not so sure or comfortable with is whacking the current Primary partitions and migrating the Ubuntu install to the new primary partition.
Device Boot Start End Blocks Id System
/dev/sda1 1 13 102400 de Dell Utility
Partition 1 does not end on cylinder boundary.
/dev/sda2 * 13 1926 15360000 7 HPFS/NTFS
[Code]....
Today due to losing one of my partitions (I call it here P1) by installing windows xp, I recovered it by "Parted" P1 was a logical partition but now P1 is marked as a Primary one
View 9 Replies View RelatedI have a partition that I want to put Debian on, and I'm using UNetbootIn, and whenever I try to use it, I can't make it install to my drive. The only option is for my C drive. Can you tell me another way to install Debian to my partition. Do I need to make the partition a logical drive?
View 1 Replies View Related