I can't seem to be able to run Emerald at startup. I tried to use "emerald --replace" (without quotations) on Startup Applications and when I logged off then back on, it won't work. It only works when I press Alt+F2 then type emerald --replace. I
View 1 RepliesI would like to use emerald on oracle linux 5. I prefer this forum so I migrated to here! In fact, I already managed to import some themes in emerald, and to apply them, but after a reboot there was an error message (I don't remember it but I can retry to boot if you want), and my new emerald theme was not loaded, instead I had the default one, and when I launched emerald I wasn't able to import a new theme, there was no theme in the emerald window. so I tried to import one with the file manager by clicking on the "import" button, but in my home folder (/home/olivier) I had ... nothing : no file, no directory, yet there are still on the disk, I verified.
this seems an error of rights, but I don't know what to do. I must also specify that I have not already put "fusion-icon" in the list of the applications to launch at the startup, so I have to launch it after the boot (and it's what I did after the boot I spoke about above. I don't remember if I launched fusion-icon as "root" or "olivier"...
I have problem for emerald and compiz in KDE fedora 11. The problems are:
1. Emerald is not running at startup so I have to type emerald --replace every time I login otherwise I get no windows border.
2. The static application switcher in compiz is not running at startup so I have to go to ccsm and disable then reenable it again otherwise when I point my mouse to the edges of my screen it wont do anything.
My plan is to slowly switch over to this Distro rather than use Gnome 3 or Unity, but I'm not as familiar with Debian. I've gotten everything working (including Compiz) except that I can't find Emerald anywhere? Is it possible to install Emerald in Debian Squeeze? If so, is there a PPA or repository?
View 2 Replies View RelatedWhere to get the in the title mentioned packages ? I'm using Squeeze 64bit.
View 9 Replies View RelatedI have emerald on Ubuntu 9.10 64bit, and I wish to use emerald to decorate windows.When I run
Code:
emerald --replace
, the windows are decorated, but the command does not return. That is to say, I need to press
[code]....
I use Ubuntu 10.04 and I have compiz installed and also emerad. Currently I have the theme Ambiance and I want to change it to another theme that use emralld, but the problem is nothing change.
View 2 Replies View RelatedWhen I login, emerald starts automatically and I want gtk to start automatically.
How can I fix this?
I want to theme my Ubuntu. I have heard that Emerald is good for this, but I just don't understand how to use it.
There is a theme there already called "Beryl Red" (I assume it's a default), but there is no button to install or use it.
how to use Emerald in XFCE, Note: I've installed Compiz, Fusion, and Emerald, but XFCE just plain refuses to acknowledge their presence.
There must be a script I need to edit somewhere...
This is the BETA version of the latest Xubuntu, by the way...
I just upgraded my Ubuntu from 10.10 to 11.04 and can't use it normally after getting in desktop, not after a struggle to switch to switch the desktop to gnome. Plus, even in gnome, the emerald can't start as well, it says "stack error" when I run "sudo emerald --replace".
View 1 Replies View Relatedi just installed ubuntu 11.04. now i want install emerald in my comp but as it is a dead project its not competible but i found a guide on google. to compile the emerlad.
Code:
sudo apt-get install build-essential libgtk2.0-dev libwnck-dev libxrender-dev libpango1.0-dev libcairo2-dev compiz-dev libdecoration0-dev libtool intltool git
cd ~
[code]....
so i did that and also installed CompizCOnfig SEtting Manager. i enabled the the window decoration, and in command i wrote
Code:
emerald --replace
but its not changing, even when i select a theme from the emerald theme manager.
I did a bunch of stuff I read about here: [URL]
Okay, I don't think any of that would have hurt anything. Well then I was messing around and I created a shutdown launcher using the command
Code:
sudo shutdown -h now
I engaged the launcher to see what it would do and it caused a rather violent shutdown. When I turned my computer back on my emerald theme was gone and I can't seem to get it going again.
[URL]I had this emerald theme not two days ago, and now I cant find it again for the life of me, I am 99% sure I got it on gnome-look but i've been searching for quite a while and just cant find it again anywhere.
View 8 Replies View RelatedSo I've done the Compiz --replace command but it doesn't work. I've even uninstalled Emerald but there's no change. What is this?
View 4 Replies View RelatedI just did a clean install with Lucid and I can not seem to get Emerald to keep the theme when booting up. I have to keep pressing Alt-F2 then type...
Code:
emerald --replace
I had changed the settings last time and when I booted up, emerald stayed the same. I'm not sure how I changed them, I forgot. I know I did something with...
Code:
gconf-editor /apps/metacity
...but I don't remember what I did and I can't seem to find the web site that showed me how. How can I keep the themes when booting up and not have to manually do it everytime I boot up?
trying a different title... If I can't get satisfaction, then I'll give it a rest.1.) Installed Xubuntu 11.042.) Installed Compiz, Fusion, CCSM, & Emerald.3.) Compiz works.4.) Emerald doesn't.5.) Using Fusion to set the WM or typing [emerald --replace] (in CCSM) doesn't work. Xubuntu seems unwilling to cooperate with any WM if it's not XFWM.Has anyone here gotten Emerald to work in Xubuntu 11.04?
View 9 Replies View RelatedOk yesterday I had a problem where I tried to install some Emerald themes on Xubuntu 11.04. It did not work and in the process, all of my Windows Decoration was gone, the Maximize and Minimize buttons at the top of each windows were gone, as shown in the picture attached. I am done with emerald, I uninstalled, I just want my top windows bars back. I found a command for the terminal that fixed it, but when I turned my PC on this morning, the bars were gone again, and I had to reenter that command again. The command it 'xfwm4 --display=:0.0 --replace' that brings them back. Is there a way for my computer to automatically do that command or is there another permanent solution?
View 5 Replies View RelatedI use Compiz, on Ubuntu 10.04, and notice that Emerald sometimes fails to load at login, leaving all apps window-less, and I have to do an Alt+F2 and "emerald --replace" to bring it back..Any ideas what can cause this? I like to keep my UI looking nice, and that's why I use those utilieis, they run fast on my setup
View 1 Replies View RelatedI was wondering what is happening with emerald-compiz in openSUSE ? I went to openSUSE download and all the packages for emerald-compiz aren't available. Are they still maintained ?
View 4 Replies View RelatedIs there any way to make emerald apply to Songbird? I've got all my maximize-minimize-close buttons on the left side of the windows now, only Songbird refuses to adapt to the new style.
View 9 Replies View Relatedemerald theme wont enable. i ran emerald --replace in terminal nothing i replaced command in compiz nothing i added emerald as a start up nothing. right now there are no window borders. window decorations are enabled. what am i missing?
View 1 Replies View Relatedi recently watched Die Hard 4.0 and liked the look of his theme; this lead me to download it from some website.. it's a .emerald - so i went into Ubuntu Software Center and i found it, but there was no install button.. and after poking around on here, and using terminal alot. i still havent got it.
P.S, im running 9.10 on my White Intel iMac
I just upgraded to 10.04 (actually had to dl 10.04 iso and do full install, upgrading from 9.10 crashed). I am trying to use "Emerald Theme Manager" (which is a pain aside from the problem I am having) When I click on a theme I dl'd and installed, E.T.M. just vanishes, the theme does not switch and I am done. It takes about 1 second after clicking the theme and then gone, no error message or error reporting message
View 9 Replies View RelatedAfter switching to 10.04 (fresh install) I can't adjust emerald themes. In emerald settings manager I used to click on desired theme, edit it and save under a new name, then delete old one. Weird, but working. Now, when I click on theme in the list, it sets this theme and quits. I didn't find a way to adjust theme settings.
View 1 Replies View RelatedIn the Emerald Themer, I'm able to apply a theme, but only the title bar changes. The rest of the window remains the theme the themes of 'right click > Change Desktop Background > Theme Tab'. (Yes, I have tried the emerald --replace thing)In short, the theme of the window is kinda half-and-half between Emerald and GTK. Screens attached.(Screen shot 1 is illustrating a emerald theme, with matching gtk theme, screen 2 is showing the same emerald theme, but this time with a different GTK theme. Also, ignore the odd look of the images, it's a twinview setup with screen one zoomed in)
View 5 Replies View Relatedwhere could i find themes for emerald themer? for some reason Firefox says problem loading page. my network is fine and completely functional
View 2 Replies View RelatedI'm using this metacity theme along with the included (and AMAZING) emerald theme for the window borders. Just wondering if there's any way I can keep the window borders as they are, but put shadows on for the gnome-panel and my stickynotes? See HERE.When I try to adjust the shadow settings in emerald, it changes everything -- including the window borders, which make the theme look horrible.I know I can specify certain types and classes of windows when using compiz as default window decorator with ccsm, but is there any way to do something like this with emerald?
View 3 Replies View RelatedHave recently installed emerald and downloaded and imported a new theme, however I know want to go back to the default theme (I believe it is called Beryl Red).
View 6 Replies View RelatedI have instaled compiz fusion and emerald. I understand through research that there is a bug in Emerald that requires the use of terminal to activate a new theme specifically typing the following text at the command line: emerald --replace.
When I do this the theme changes. However when I close the terminal it reverts back to the gnome default theme. What do I need to do to keep the Emerald theme changes. Previously I added the following to the start preferences: fusion-icon --no-start