when i print a document and select only certain pages the printout still prints all thepages. this is very annoying, since i have to print everything from anther compusing ubuntu 10.04 with latest updates.
View 4 RepliesHow can I combine multiple single page prints into a single print job? For example, using Firefox on Linux one can print a web page such that each sheet of paper has four pages printed upon it. I would like to combine several separate web pages so that for example, web-page-a, web-page-b and web-page-c (each less than one print page long) are printed on a single sheet of paper.
I would like to do this without having to use some form of image editor to combine and manage manually created temporary files.
i am unable to print specific pages in Ubuntu. i connected my HP Desk jet F2120 printer to my Ubuntu machine and it installed correctly but now if i want to print only the certain pages from a word document or PDFs i am unable to print it. there is a option of pages in print menu which says : " example 1-3,7,11" i don't know what that means.
View 2 Replies View RelatedAre there any reliable ways to print libreoffice or openoffice drawings to multiple pages. I have two drawings I designed for 11" x 22" sheets, and I'd like to print one of them to 4x or at most 6x 8 1/2" x 11" sheets, without reduction.
So far, when I've tried this using "print to multiple sheets," the results have been erratic, and have basically wasted paper and ink with no usable results.
I can't even preview this.
I am using the old trick of creating a duplicate file, and creating for duplicate slides within it, making each slide one group, and using the alignment settings to make each slide match one corner of the original image. It works, but it is kinda clunky.
i have an Brother HL-2040 and normaly all pages print fine. But i noticed that some pages from pdf file won't print.The driver says it failed.Can that be, that my driver has some problems? I tried others but they don't print anything.I have the current opensuse 11.2 version and the latest cups version.
View 1 Replies View RelatedI have a PNG image file that is 568 5766 pixels (W x H).
I don't want it to shrink, trim or anything.
It is wide enough for 1 page but the height should fit on about 5 pages.
So how do I make it print on 5 pages?
I am able to print from Open Office just fine, but if I attempt to print a PDF or if I attempt to print directly from the internet, I get nothing!So instead I have to open the openoffice and copy the internet stuff to a page in there so it will print.Do any of you have an idea of what can be the cause.I am a linux noobie, so I may be the problem, however it is frustrating putting PDF's on flash drive and getting my son to bring his windoze laptop in so that I can print my PDF.
View 2 Replies View RelatedThere is the option to select a "printable form", but the form is much larger than any paper the printer supportsIf I use "Print Preview" in Firefox, it creates only one page that contains the beginning of the form, and ignores the rest of the form.If I do the exact same thing on a Windows machine, Firefox creates as many pages as necessary when I click "Print Preview"I feel that this problem is not because of Firefox, but because of how "Print Preview" works on Ubuntu.How can I get the print preview to create additional pages to include the entire text when I click "Print Preview" ?
View 3 Replies View RelatedI loaded FED 13 and running kernel 2.6.34.6-47 fc13, Now back from holiday, I'm trying without success to sort out a few problems. 1 can not print. the printer sets up OK epson R285, but can't print test pages or from any app, or from CLI with lpr command. Cups log shows this:-
[Code]....
I successfully installed cups on my fedorabox, I can manage it through the web interface on port 631. I added the hplip and installed a HP Deskjet printer. However, when I want to print a test page I get the following error: "no pages found". The print job is in a stopped state...
View 2 Replies View RelatedI use PrimoPDF for Windows to "print" pages to a pdf file.
Is there a good alternative available for Ubuntu?
I have a Cent OS 5.4 32 bit final installed in my dedicated server.
I used to run lighttpd with php in my server until now and all was fine.But yesterday I changed my website which needs apache to run. So installed apache using yum install httpd command.
Then I added the virtual host name of my domain in webmin panel but when i try to run my php script in browser then its not opening php pages.
Instead it downloads php files like index.php when i open in browser.So I guess apache is not able to compile and run php pages. Only html pages are opening right now..
when i input man <cmd>.....it's saying formatting pages....n then it is displaying blank page.
View 6 Replies View RelatedInteresting problem: For the first time with Xubuntu 10.10 64bit, I am finding certain applications print corrupt. A varying amount of letters / numbers either get substituted/print a blank space/ print a box etc etc. This corruption seems to happen from a Pdf ( evince ) or Spreadheet ( Gnumeric ) Opening the same Pdf on another machine (ubuntu 10.10 32bit) prints perfectly. Opening the same .xls file on the original computer but using OOo Calc prints perfectly.
I guess I have ruled out any problems with the printer itself or the network JetDirect box. I have re-installed CUPS and evince and upgraded to the latest version of HPLIP but the problem appears unchanged.
I cannot print pdf files. I have tried using okular and xpdf. The documents display in the program, but print preview shows a blank page. The printer then sends out blank pages. I have tried printing on 2 different printers using usb cables. Using terminal to process the commands shows error:
Quote:
xxx@xxx:~$ xpdf
***** MediaBox = ll:0,0 ur:611.976,791.968
***** CropBox = ll:0,0 ur:611.976,791.968
***** Rotate = 0
Segmentation fault
Converting to .ps also is blank.
My wife has a canon MP470 printer and running ubuntu 10.10. I am able to print black and white, but unable to print photos. I got it to work using another driver, but not the 'correct' one for this printer. I have searched a bit and don't see anything about ubuntu 10.10, just older versions. Or should I just network her to my printer....?
View 5 Replies View RelatedI'm very new to Linux, and I have ran a Windows XP server before, with a Apache2 Server software for Windows. and didn't have any problems with it, but I really want to set this server up with Linux.
The server is running, but the only thing that comes up in the browser, is the html pages, the pages call all the images from a folder /images/ but for some reason I can't get it to pull the folder up. None of the graphics show on any of the pages.
I also have a VirtualHost setup, and have another website set up in the DocumentRoot with the 2nd site, but it won't come up ether, even tho it is listed as the 2nd VirtualHost, and have that folder set up as the DocumentRoot.
I'm just using IP Addresses for now till I get this all sorted out.So if I enter the IP the main page comes up, just no graphics. if I enter the IP Address/2ndSiteFolder/ I get a directory listing with the 2nd site folder listed, so now if I click on the 2ndSiteFolderName, it comes up as IP/2ndSiteFolder/2ndSiteFolder/ Now the 2nd site comes up, and so does all the Graphics for that site, even if I go to some of the other subfolders site. So its just weird. I don't know what I need to do to get this to work right.
I know it has to do with setting up the folders for VirtualHost, I just don't know what it is. I have been working on this for a week, and I'm not getting anywhere..
Just installed drivers for Lexmark pro200 - S500 series. However although it is recognised by the system and has a tick by its name, And tells me it is connected via usb file goes to print que but will not print. Also tells me it is Printing - localhost! is this correct?.
View 1 Replies View RelatedI initially had a problem accessing the CUPS interface (see my other post) and got that resolved by adding the user "cupsys". Now, everything "looks" ok, and when I print a test page, it shows it as completed (in CUPS). However, the page never prints.
The printer is a Canon MP600 (using the canonmp600en.ppd file to configure it). Here's the output of my conf file.
Code:
# Show troubleshooting information in error_log.
LogLevel debug
[code]...
I'm running Kubuntu 10.10 with a Laserjet 5M printer. When I attempt to print a job from Firefox or from Okular, the job never gets onto the print queue. However, I can print test pages on the printer and also print from OpenOffice, so this seems to be app-dependent. I know the jobs aren't being queued because the job number doesn't increase (as shown by the jobs for the test pages). Both Firefox and Ocular give every indication that the print job has been processed correctly.
View 1 Replies View RelatedNot sure when CUPS started acting up. I have the latest 13.1 current software installed.The first page to print is always OK, but all succeeding pages are overwritten. The second page shows the first page on top of it, and the third shows the preceding pages on top of it - and so on. Has anyone else seen this problem?I guess the printer buffer is not getting flushed correctly. If my configurations were trashed in some way, I don't know where to look for a fix.
View 14 Replies View RelatedOur one remaining problem seems to be printing. She has an HP OfficeJet 6500 USB printer. We have the computer conntected. Strangely, when I boot from the CD the printer shows up as installed even though I did nothing to install it. After having submitted a print job it shows the printer status as "idle" and the print queue is empty. I tried deleting that printer and re-installing. The installation went as one would expect. However the results are the same. I'm beginning to think that somehow the problem is related to the fact that we are operating from the live CD. getting this thing to print from the live CD.
View 9 Replies View RelatedI have a debian system installed on my pc . I have just saved a text file on my desktop . Please let me know how can i print the file through comand prompt ? I need to learn the printing the file thru comamnd line .
View 1 Replies View RelatedI am running 9.10. I have a HP Photosmart 7350 printer. I have it installed and printing. But the issue I am dealing with is that it will print a full page and then print a blank page..then a full page..then a blank page. Actually they aren't completely blank..it shows half of "2 of 6" or whatever page it is on. Like it cuts that in half and prints the 2nd half of "2 of 6" onto a separate new page.
View 2 Replies View RelatedHere we go, error 4,384,239,283 in Ubuntu I was trying to load a PDF and print it and only said "print to file" So I go to System >Administration>Printing, and it says "Starting Printing." at the bottom, and then goes away... Sigh, anyone knows whats going on?
View 5 Replies View RelatedI tried to make that as short and descriptive as I could. There are certain web pages that I try to visit on my Linux computer that either respond after more than a minute of waiting for a response or, more often than not, simply do not respond at all - leaving the browser "waiting for xxxxx". Yet when I try those same pages on my GF's Windows computer, connected to the same router/DSL connection, the pages load quickly and without problems. Both systems are running Firefox.. One of the pages, for reference, [URL]..
View 5 Replies View RelatedI've just installed Ubuntu 9.1 amd64 and I have a problem with acces to some web pages (i.e amd.com, adobe.com). I looks like bowser load a page but then stopping it last infinitely. I have Ubuntu 9.1 x64Atheros wireless adapter connected to ZyXEL access point.Parallel Windows machine which connected to te same router has no prblem with access to those sites. I tried different browsers, different setting of DNSeven set up different versions of 9.1 (x64, x86)
View 2 Replies View Relatedafter wrestling with several problems over the past few days of switching over to a portable version of Linux 9.10 (I'm running a Live USB created using Lili USB), and deciding between the UNR or the Desktop i386 releases (I eventually went with UNR because i386 will not load on my netbook and ends up corrupting itself), I now find myself with the interesting problem that Firefox will no longer load webpages.I'm using a wireless connection, and it worked about 4 hours ago, but doesn't any longer. It registers that it is connected (The network icon displays the connected information), but the webpages themselves will not load (And I don't know if any other web based application functions- I only bothered to check firefox).
And I know the connection itself is not to blame because I'm using it right now to post this message (Off of Windows 7).Any help that can be given would be appreciated. Except for these problems that come up I'm loving Ubuntu, and intend to use it inbetween classes and such.EDIT:No internet applications work, and the router does assign me an IP address while in Ubuntu. Also, the speed of the "Server not found" message indicates that it's not even trying to connect.
If I surf the net and reads webpages everything works great.But if I forxample try to write a comment in Facebook, I have to minimize Firefox, then maximize. Writing works fine
View 4 Replies View RelatedAt the moment I regularly use Image Magick convert command to convert PDF's to images which is great but I would like to only convert some of the pages in the PDF instead of them all. Im sure the function must be available I just haven't been able to find it even after bashing google for a few days.
Code:
convert *full.pdf test%d.jpg
this is the command I use at the moment.