boot fails with the following message:/etc/default/locale: 5: d_fmt: not found
init: mountall main process (234) terminated with status 127
if I boot to Recovery, is there any way to edit this locale file or to delete it and replace it with a default one? How can I edit the Locale file to fix this problem without being able to boot?
Last night i have upgraded my 9.10 to 10.04. After rebooting the system i couldnt boot linux.I got the following message:Starting up ...mount: mounting none on /dev failed: No such deviceinit: ureadahead main process (20 terminated with status 5After that message some 10.04 check disk started, but nothing good came out of it.
View 3 Replies View Relatedi had a couple of things popping up during bootup and checked my boot.log and found this
Code:
fsck from util-linux-ng 2.17.2
fsck from util-linux-ng 2.17.2
udevd[416]: can not read '/etc/udev/rules.d/z80_user.rules'
fsck from util-linux-ng 2.17.2
fsck from util-linux-ng 2.17.2
[Code]....
I booted up my laptop and the boot sequence got stuck at the boot splash screen (plymouth). I did an esc and I saw a failure message, the error I remember in my panic mode is: fsck terminated with status 8
I rebooted, got the same message. Rebooted again and this time, to my relief, it worked.
1) What happened, should I be concerned? Not sure why it worked after 2 reboots.
2) Is there a possibility this could happen again?
3) Are there any boot log files I could look at?
4) Is there anything I can do to fix this? Or a check of some sort?
I'm using Ubuntu 10.04 on a Dell Studio 1535 laptop. No dual boot. The disk is partitioned and I've got my /home folder on the other partition for situations like this.
My desktop using Ubuntu 10.4 (I recently ungraded from 9.04) crashed. That is Ubuntu is not loading. At first I get a Ubuntu icon and count % of cheeking system and before it reaches 50% a linux screen comes up with error messages:
Last six lines:
Code:
mountall: fsck / (9290) terminated with status 4
mountall: Filesystem has errors: /
init: mountall main process (9289) terminated with status 3
Mount of filesystem failed.
Maintenance shell will now be started.
CONTROL-D will termainae this shell and re-try.
roo@computername-desktop:"# _
How to revive Ubuntu?
I am currently running this off my laptop with the issue using a bootable flash version of 11.04. hwclock keeps terminating with status 127 on boot everytime tried anything i could come across, and still nothing checked the hard drive as well.
View 4 Replies View RelatedI've just installed Ubuntu 9.10 64bit on my new server and then built a 32bit image. When I try and boot my thin clients I get the following error on VT7:
Code:
mount: according to mtab, aufs is already mount on /
mountall: mount / [416] terminated with status 1.
mount: according to mtab, none is already mounted on /proc
mountall: mount /proc [409] terminated with status 1.
mount: according to mtab, none is already mounted on /sys
[Code]...
When I restart my computer the following messages come up:
__________________________________________________ _
init: usplash post-start process (2221) terminated with status 1
* Stopping ClamAV virus database updater freshclan
[code]....
I have Ubuntu 10.10 installed. When I boot, this error message appeared "init: ureadahead main process 388 terminated with status 5" After that, another error message appear saying " *ERROR* render ring head not reset to zero"
View 2 Replies View RelatedCode: init: ureadahead main process (423) terminated with status 5 Ubuntu 10.10 lorentz tty1
lorentz login: The first line of the above shows up during boot before the display goes graphical. I can see it again (all of the above) when I Ctrl+Alt+F1 to access the first text console. Anyone know what is causing this, what problems can happen as a result, and what should be done about it? I moved from 9.10 on one machine to 10.10 on a new machine, so I don't know if it's a hardware problem or software. I am running 64-bit. I am not really seeing any problems happening besides the few scattered application and GUI glitches that are common with a new/migrated setup.
I keep getting this message as the first thing I see when I boot up. Afterwards, it displays the ubuntu logo and dots under it and then the screen blacks out, but the display lights act like its OK (wireless ETC). should I use a boot CD or something? The hard drive is fine and this happened after the computer blacked out during updates. i scanned the hard drive and its OK, according to the little scan thing you can do before booting up. I have a Compaq Presario V200. For specs, thats all I know.
View 1 Replies View RelatedI found below message in my boot.log. init: ureadahead-other main process (814) terminated with status 4
View 4 Replies View Relatedthis is my problem with ubuntu... i updated it with some auto updates and now my computer wont load up... it goes to a screen and says
starting up
usplash: setting mode 1152x864 failed
usplash: using mode 1024x768
init: gdm main process (550) terminated with status 1
but my dad has messed with it and theres a different number in the brackets instead of (550)... what can i do?
I had been having problems with every LiveCD after 8.04.1 I tried both xubuntu and ubuntu (same internals, same results)
I ended up installing xubuntu 10.4 using the text mode installer.
The system basically works, I can not get gdm running.
dbus fails as noted above. I found launchpad bug #446971 and tried some of the work arounds with no success.
The system is an old eMachines T1120
Code:
CPU: Intel Celeron Processor 1.20GHz (w/256KB)
Operating System: Genuine Microsoft Windows XP Home Edition
Chipset: Intel 810e chipset
[Code]....
Can't seem to get past this error Doing a google search resulted with no good answers that pertained to this issue. Not sure what's halting the system from starting up, but it just sits and hangs at this forever. Only able to view the error when booting into single user mode - normal boot hangs after "enabling /etc/fstab swaps: [OK]"
View 3 Replies View RelatedWhen i boot my pc there is a black screen and then a message appears (initlymouth-splash main process(856) terminated with status 1) Some other times only this appears '' _ '' blinking (i don't remember how it is called in english,sorry) I hold Ctrl+Alt+Delete and then the screen where i choose profile comes up. I have 10.04 since they came out,and didn't have any problem except one issue with my belkin adaptor,but now i can't sync my iphone with rhythmbox or detect any flash sticks.
View 1 Replies View RelatedI installed slackware 12.1 from files i downloaded and converted to cd (images). There are six "disks" i downloaded from the slackware site and converted to images via a homemade .cmd in windows xp and then burned using imgburn.
I partitioned my hd (canibalized from an acquaintance's emachine and connected it to my desktop (1G ram, 2Ghz processor). Booted from disk 1 and fomatted the 80G HD for 2 partitions of linuxswapable at 2G apeice and 2 partitions of bootable linux. (Because i want to try another distro later). I ran the setup installing most everything and all seemed to go well. After i exited setup and restarted, it identifed the cd/hd as normal and then went into some sort of recovery mode with the emachine logo call pcangel, after which it tells me.
STOP: c0000021a (fatal system error) The session manager initialization system process terminated unexpectedly with a status of 0xc000003a (0x00000000 0x00000000). the system has been shut down. So, is this indeed an xp error message, and if so, why am i getting it after formatting everything?
I installed Lucid Lynx on my laptop a couple of months ago and for the most part everything was working fine. However, just recently the computer doesn't seem to be booting up at all. I start up the machine and then a black screen appears with the text: init: ureadahead main process (306) terminated with status 5 the (#) is different in some boot-ups
And the computer just hangs there. typing anything doesn't seem to help at all. I press enter and a new line just appears. I've left it there for hours and still no login screen.
Quote: init: ureadahead main process (274) terminated with status 59 Starting up... There is a blinking cursor under the 'S' in Starting. It doesn't boot or respond to any escape combinations that I know. Several retries have yielded the same screen. I read the original post and a few comments here about ureadahead, but did not find anything related to my problem.
View 1 Replies View RelatedAm using ubuntu for a year Now am getting some prob am unable to boot it is showing init rcefault(2111) main process terminated
View 1 Replies View RelatedI have just upgraded to Lucid on Ubuntu. I am a long time Pidgin user. I tried using Empathy with Gwibber, but I can't get Gwibber to update my IM status(es) in Empathy, so I want to go back to using Pidgin. (Additionally, I can't get Skype to work with Empathy.)I installed pidgin-microblog and pidgin-mbpurple, and they allow me to view my Twitter feed in Pidgin and update my Twitter status in Pidgin. However, in Karmic, I was also able to specify certain "status availabilities" (one named "Twitter-Available" and one named "Twitter-Away", for instance) to have the IM status message for these statuses become populated with my Twitter feed. This capability seems missing in pidgin-mbpurple in Lucid (and it seems to be the only thing missing from Karmic).
Is there a way to have pidgin-mbpurple update certain "status availabilities" in Lucid (and I'm just missing something) or is this no longer possible?Equivalently, is it possible to have Gwibber update my status message in Empathy? (I just want to be able to update my status once on one of my three computers - and have it propagate to all my other accounts (IM and social networking) and computers).
I use opensuse 11.3 and would like to see daemon status at boot time, instead of the chameleon with a progress bar
View 8 Replies View RelatedI am running Fedora 11 and recently, it has been taking longer and longer to boot up. The Fedora 11 Status bar creeps along ever so slowly till eventually I will receive a login screen. I timed it at about 3 - 5 minutes from turning on the computer till I get a log in prompt.
View 6 Replies View RelatedI am using cent os 5. When we turn on the PC I can see things which are going to be loaded and the status is [ok] in green colour. Which file linux uses for this process.
View 1 Replies View RelatedAfter a fresh installation of Ubuntu 10.10 I uninstalled empathy (im using skype). The empathy menu in the evolution indicator was gone after that.I also uninstalled gwibber. But the gwibber status indicator remains within the about-me panel... Uninstalling the gwibber package also removes the me-menu which I want to keep actually. Especially the shutdown/restart... part of it. See attachment.I know there is a shutdown panel-app...but its butt-ugly and it doesnt allow to logon/off.
In another thread I read that the gwibber status shouldnt be there if no account for it is configured... which it is not... I do use ubuntu-one though which is in the same menu... I saw that this issue was addressed at some bug report before, but not fixed yet...
Does anybody know a good workaround to get rid of the gwibber status in the panel while keeping the about me and the shutdown button?
I downloaded F10 x86_64 live Developer Spin ISO file from fedora project spins website and burned it onto a DVD...Now when I try to boot from it, I get a menu as usual. Here I select the 'boot' option. Now it shows a 'loading' page with a progress bar and 'Fedora 10' written on the right side [as usual].. After that, on the next page I get the following error..
error: unexpectedly disconnected from boot status daemon I somehow did a reboot, and again the same problem. Microsoft XP and another Fedora are already installed on the same system..
So when I boot before the boot slpash this shows:ureadahead-other main process (320) terminated with status 5. It started happening completely randomly, is this anything I should be worried about and can I fix it?When I try and run ureadahead I get this:
brandon@brandon-laptop:~$ sudo ureadahead -v
/var/lib/ureadahead/pack: No such file or directory
ureadahead: Error while tracing: No such file or directory
[code]....
I am trying to get pppd/chat working with an internal Wavecom modem, but PPP terminates with message "LCP terminated by peer". But, same pppd/chat configuration is working on my own Linux OS with Huawei 3G modem. I tried several options to get it working, but no luck. The problem is happening during the PPP negotiation with the Modem:
rcvd [LCP TermReq id=0x2]
LCP terminated by peer
But this only mean that there was a failure during PPP setup between Linux and the Modem. I tested the modem with manual AT commands via minicom to further investigate to problem, but could not even activate the PDP context:
Modem is registered and attached to Vodacom's network:
at+cops=?
+COPS: (2,"VodaCom-SA","VODA","65501"),(3,"MTN-SA","MTN","65510"),(3,"","","65502"),(3,"Cell C","C)
at+cops?
+COPS: 0,2,65501
[code]....
I tried a dist upgrade from 10.10 and come across the below errors:
init: udevtrigger main process (352) terminated with status 1
init: udevtrigger post-stop process 357terminated with staus 1
init: udevmonitor main process (351) killed by erm signal
[code]....
I am using Ubuntu as the client machine operating system. I have a start up program to connect to a Windows terminal Server. I am needing assistance in how I can force the client to logoff if the terminal connection is terminated for any reason. This is more of a security issue as we do not want the students using the computer to access the loacl machine at all. The program works great on boot, but it shows the home screen when terminated.
View 1 Replies View Related