So when I boot before the boot slpash this shows:ureadahead-other main process (320) terminated with status 5. It started happening completely randomly, is this anything I should be worried about and can I fix it?When I try and run ureadahead I get this:
brandon@brandon-laptop:~$ sudo ureadahead -v
/var/lib/ureadahead/pack: No such file or directory
ureadahead: Error while tracing: No such file or directory
[code]....
i had a couple of things popping up during bootup and checked my boot.log and found this
Code:
fsck from util-linux-ng 2.17.2
fsck from util-linux-ng 2.17.2
udevd[416]: can not read '/etc/udev/rules.d/z80_user.rules'
fsck from util-linux-ng 2.17.2
fsck from util-linux-ng 2.17.2
[Code]....
Last night i have upgraded my 9.10 to 10.04. After rebooting the system i couldnt boot linux.I got the following message:Starting up ...mount: mounting none on /dev failed: No such deviceinit: ureadahead main process (20 terminated with status 5After that message some 10.04 check disk started, but nothing good came out of it.
View 3 Replies View RelatedI have Ubuntu 10.10 installed. When I boot, this error message appeared "init: ureadahead main process 388 terminated with status 5" After that, another error message appear saying " *ERROR* render ring head not reset to zero"
View 2 Replies View RelatedCode: init: ureadahead main process (423) terminated with status 5 Ubuntu 10.10 lorentz tty1
lorentz login: The first line of the above shows up during boot before the display goes graphical. I can see it again (all of the above) when I Ctrl+Alt+F1 to access the first text console. Anyone know what is causing this, what problems can happen as a result, and what should be done about it? I moved from 9.10 on one machine to 10.10 on a new machine, so I don't know if it's a hardware problem or software. I am running 64-bit. I am not really seeing any problems happening besides the few scattered application and GUI glitches that are common with a new/migrated setup.
I found below message in my boot.log. init: ureadahead-other main process (814) terminated with status 4
View 4 Replies View RelatedI installed Lucid Lynx on my laptop a couple of months ago and for the most part everything was working fine. However, just recently the computer doesn't seem to be booting up at all. I start up the machine and then a black screen appears with the text: init: ureadahead main process (306) terminated with status 5 the (#) is different in some boot-ups
And the computer just hangs there. typing anything doesn't seem to help at all. I press enter and a new line just appears. I've left it there for hours and still no login screen.
Quote: init: ureadahead main process (274) terminated with status 59 Starting up... There is a blinking cursor under the 'S' in Starting. It doesn't boot or respond to any escape combinations that I know. Several retries have yielded the same screen. I read the original post and a few comments here about ureadahead, but did not find anything related to my problem.
View 1 Replies View RelatedI tried a dist upgrade from 10.10 and come across the below errors:
init: udevtrigger main process (352) terminated with status 1
init: udevtrigger post-stop process 357terminated with staus 1
init: udevmonitor main process (351) killed by erm signal
[code]....
I have an Acer 9410Z laptop that I believe is running the Maverick Meerkat version of Ubuntu Studio. I just did an upgrade using Synaptic. I get to GRUB, but When I try to boot 2.6.35-22 (or the recovery mode or a real time kernel I had installed )I get the error:
INIT: Failed to spawn ureadahead main process. No such file or directory I then get the Ubuntu Studio splash screen for 2 seconds but then instead of a normal boot I end up in the terminal.
I keep getting this message as the first thing I see when I boot up. Afterwards, it displays the ubuntu logo and dots under it and then the screen blacks out, but the display lights act like its OK (wireless ETC). should I use a boot CD or something? The hard drive is fine and this happened after the computer blacked out during updates. i scanned the hard drive and its OK, according to the little scan thing you can do before booting up. I have a Compaq Presario V200. For specs, thats all I know.
View 1 Replies View RelatedI have upgraded my ubuntu to the latest version a few days ago. Prior to the update I played a little with my partitions (transferred about 15GB from my windows partition to ubuntu partition).Up until yesterday everything worked. For some reason ubuntu will not load up now. After selecting ubuntu on grub i get the following msg: init: mountall main fsck process (574) terminated with status 3 mount of filesystem failed one or more of the mounts
View 3 Replies View Relatedthis is my problem with ubuntu... i updated it with some auto updates and now my computer wont load up... it goes to a screen and says
starting up
usplash: setting mode 1152x864 failed
usplash: using mode 1024x768
init: gdm main process (550) terminated with status 1
but my dad has messed with it and theres a different number in the brackets instead of (550)... what can i do?
Am using ubuntu for a year Now am getting some prob am unable to boot it is showing init rcefault(2111) main process terminated
View 1 Replies View RelatedWhen i boot my pc there is a black screen and then a message appears (initlymouth-splash main process(856) terminated with status 1) Some other times only this appears '' _ '' blinking (i don't remember how it is called in english,sorry) I hold Ctrl+Alt+Delete and then the screen where i choose profile comes up. I have 10.04 since they came out,and didn't have any problem except one issue with my belkin adaptor,but now i can't sync my iphone with rhythmbox or detect any flash sticks.
View 1 Replies View RelatedWhen I restart my computer the following messages come up:
__________________________________________________ _
init: usplash post-start process (2221) terminated with status 1
* Stopping ClamAV virus database updater freshclan
[code]....
I had been having problems with every LiveCD after 8.04.1 I tried both xubuntu and ubuntu (same internals, same results)
I ended up installing xubuntu 10.4 using the text mode installer.
The system basically works, I can not get gdm running.
dbus fails as noted above. I found launchpad bug #446971 and tried some of the work arounds with no success.
The system is an old eMachines T1120
Code:
CPU: Intel Celeron Processor 1.20GHz (w/256KB)
Operating System: Genuine Microsoft Windows XP Home Edition
Chipset: Intel 810e chipset
[Code]....
Can't seem to get past this error Doing a google search resulted with no good answers that pertained to this issue. Not sure what's halting the system from starting up, but it just sits and hangs at this forever. Only able to view the error when booting into single user mode - normal boot hangs after "enabling /etc/fstab swaps: [OK]"
View 3 Replies View RelatedI installed slackware 12.1 from files i downloaded and converted to cd (images). There are six "disks" i downloaded from the slackware site and converted to images via a homemade .cmd in windows xp and then burned using imgburn.
I partitioned my hd (canibalized from an acquaintance's emachine and connected it to my desktop (1G ram, 2Ghz processor). Booted from disk 1 and fomatted the 80G HD for 2 partitions of linuxswapable at 2G apeice and 2 partitions of bootable linux. (Because i want to try another distro later). I ran the setup installing most everything and all seemed to go well. After i exited setup and restarted, it identifed the cd/hd as normal and then went into some sort of recovery mode with the emachine logo call pcangel, after which it tells me.
STOP: c0000021a (fatal system error) The session manager initialization system process terminated unexpectedly with a status of 0xc000003a (0x00000000 0x00000000). the system has been shut down. So, is this indeed an xp error message, and if so, why am i getting it after formatting everything?
recently a weird error occured on my Ubuntu Karmic. When I shutdown (or reboot) the os, the flashing logo shows and then the whole process hangs with last few lines of shutdown log displayed. The last line then says this error:
Code:
init: rc main process (pid) killed by TERM signal where pid is actual pid of that process.
Then I have to shutdown the computer manually with hardware button. It's no big deal, it's just not that comfortable and I'd really like to know why this is happening.
I have recently upgraded 9.10 to 10.04 through the alternate CD. However, each time when I boot my system, post upgrade, I receive this error: INIT:failed to spawn spreadahead main process: unable to execute: No such file or directory After that it waits for a long time to show the desktop.
View 2 Replies View RelatedI just installed Ubuntu on a Cr-48 netbook, which has an odd custom bios which can't boot regular bootloaders/kernelsI'm therefore using the existing kernel on the machine rather than the Ubuntu one, with no initrd/initramfs, just booting directly to the Ubuntu root filesystem.t's just a minimal text mode install right now, from the alternate installerAt boot time, plymouth crashes. It doesn't seem to actually affect the system, everything still boots just fine, but it doesn't seem like it should be doing that I get:
Code:
mountall: Disconnected from Plymouth
init: plymouth main process (70) killed by SEGV signal
[code]....
I have a minimal installation of Ubuntu, with lxde-core and some other apps I really use. Sometimes when I start the system, it hangs and nothing else happens. I hit Esc and then I see:Code:init: Failed to spawn rc-sysinit main porcess: Unable to open console: Input/Output error.I get stuck there, and the only thing I can do is to hold the power button, shutdown, boot again, and pray it will boot fine. Sometimes it does, sometimes it doesn't.
View 1 Replies View RelatedI have a project in which many processes run. p1,p2,p3.
->There are some .so files are included in some process when needed example ppp.so in process p1 (when ppp is needed and will go like a plugin) but it has a init () function how a process includes a init() function ?
->process p1 has main function i.e main()
->so evry process has main() right ?
what is the difference between init () and main () functoins. where is init () used and how many init() a process van have ?
I run a memory-hungry process (mkcromfs) which consumes more memory than I have physical memory on my latop, so it is paging and swappin and thrashing all the time and loadavg is about 2 (compcache is already in use with usual swap partition as well), but slowly moving forward (Although I afraid it will finally try to allocate >2GB and crash draining 2 days of thrashing).
When I want to use the laptop for something else, I stop the process, start X server, firefox and other programs. The problem is that when I start Firefox the loadavg jumps to 10 and the system becomes almost unresponsive at all (long time to turn on/off caps lock, slow mouse cursor position updates, slow switching from X server to Linux console, slow login).
The stopped mkcromfs still holds a lot of memory (464.8 MiB and slowly falling) and moves it to swap only when more memory is needed for some other program, which results in a great slowdown.
How to tell the Linux to swap out this process entirely (e.g. I'm not intending to resume it in short term), possibly waking from swap other data? Also it will be useful to be able to specify the exact swap device to swap the given process out (for example, mkcromfs's memory is useless in ramzswap).
Update: Now I just write a 400-600M of data from /dev/erandom to tmpfs and it makes mkcromfs to shrink. Is there more proper way?
I upgraded from Ubuntu 10.0.4 to 11.0.4 on a Dell Optiplex. Now, when I boot, I am given the option to boot into different kernels. I select "ubuntu, with Linux 2.6.38-8-generic", which results in a black screen that reads
Code:
init: plymouth main process (58) killed by SEGV signal and that's where it hangs. Pressing ENTER or hitting Esc does nothing. What steps can I take to recover my machine and all the files I used to have on it?
I just updated from 9.04 to 9.10 (it's a long story, and I still can't go beyond 2.30).The update got rid of WICD, which is what I used and installed network-manager. Network-manager was not working at all, so I uninstalled it again and installed WICD. I could connect perfectly and had no problems.However, now the computer hangs during boot, saying that init can't start network-manager. I assume that something went wrong during the uninstalling process, since it wasn't updated.
This is the message: init: Failed to spawn network-manager main process: unable to execute: No such file or directory.
So how do I update it or manually change it so it stops requesting network-manager?
My machine is dual booted with Fedora 14 and RHEL 6. (I have only installed Red Hat because I am studying for RHCE). Just now I tried to install the Banshee player on my Red Hat OS. I ran various scripts inside the directory to see what really happens and after I ran the 'Makefile.in' file my terminal froze. It displayed '/bin/ not found'Then i restarted my computer and I got the following messages:
init: Failed to spawn readahead-collector main process: unable to execute: no such file or directory
init: Failed to spawn rcS main process: unable to execute: No such file or directory
init: Failed to spawn readahead main process: unable to execute: No such file or directory
[code].....
I tried run level 1 and run level 3 but I get the same error messages.
PS: My Fedora 14 installation is working fine.
I would like to run in the background the UREADAHEAD for test speedup
Some of you know a way?
My ubuntu server was working normally but it suddenly failed to start, stopping after the following message: init: ureadahead-other main process (587) terminated with status 4 after this message, the system halts and does not finish the start up processes.
If I start the server in recovery mode, I get: init: ureadahead-other main process (587) terminated with status 4 [ 21.892940] ACPI: I/O resource w83627hf [0x295-0x296] conflicts with ACPI region HWMI [0x295-0x296] the system also halts and does not start. Right now, I can not use the server at all.