I'm writing a small script to automate the backup: Problem: within the folder structure there're files and folders with Cyrillic characters: Example (this is not for bucking up the mp3s; it's only an example):
[Code].....
I got a filename called like this:
beach---------20090808-110000.ogg
beach---------20090808-120000.ogg
It's like this:
name----------YYYYMMDD-hhmmss.ogg
Now Im splitting these hourly files into 1 minute files. I get then this output sofar properly:
beach---------20090808-110000_00.mp3
beach---------20090808-110000_01.mp3
beach---------20090808-110000_02.mp3
and so on....
the 00, 01, 02 and up are the minutes it has splitted it. Now I need a script, after it did this, to rename the file names into this:
beach---------20090808-110000.mp3
beach---------20090808-110100.mp3
beach---------20090808-110200.mp3
beach---------20090808-110300.mp3
10.04 rar failed to unrar files with multibyte filenames Here is the error messages:
[Code]...
I install and tested Restore EE Backup server on a test PC with basic configuration and its working fine.
[URL]
The issue i have is where is the location these backup snapshots or files are saving? I want to add a separate Storage to save the backup?
I am trying to write a bash script to delete a file where I know the first part of the name, but it has spaces in it. The second part of the file name is a random set of characters. I was hoping to use a wildcard for this, but I keep getting a error massage saying file or directory does not exist. This is a simplified form of my script:
Code:
MYFILE=This is my file
rm "$MYFILE*"
The file may be something like "This is my file.123abc456.suffix"
Fox example.I want to rename the files below like this: test1.png、test2.png.....
-rw-rw-r--. 1 test test 20448 2010-12-08 20:11 2010-12-08-212440_1440x900_scrot.png
-rw-rw-r--. 1 test test 29799 2010-12-08 21:25 2010-12-08-212526_369x331_scrot.png
-rw-rw-r--. 1 test test 34167 2010-12-08 23:54 2010-12-08-235424_580x328_scrot.png
-rw-rw-r--. 1 test test 155202 2010-12-08 23:55 2010-12-08-235511_1440x900_scrot.png
I'm just setting up a partition on a seperate HDD in my system. I plan to use the partition to backup the important files on my main HDD (to guard against HD crash).
The question I have is about where would be the typical location to auto mount this partition? Which would it be normal to go for:
1. /backup/
2. /media/backup/
3. /mnt/backup/
4. /home/chris/backup/
Moving right along, I have a folder of MP3 files containing various Movie sound tracks and scores. I'm using Audio Tag Tool to tag all the files at once with an "Artist" of "Soundtrack", and to inherit the "Title" tag from the file name. After that, I will rename all the files (Using Audio Tag Tool -- awesome program, btw) with the format "<Artist> - <Title>.mp3"
The problem, is many of my files already contain the string "Soundtrack", which would be redundant. I happen to be a perfectionist, so I'm unable to ignore it and move on. Hence my question to you fine folk: I want to delete all instances of "soundtrack" (-i case irrelevant) in the filenames before I go through the above steps. But, its not quite that simple. This is a sample of some of the file names:
[Code]....
i installed ubuntu 10.10 and i need to make backup for files in my network (small company) who use windows system.there is any solution or any open sofwatre on ubtunu .and i like to to choose the type of file to backup
View 3 Replies View RelatedI'm trying to find a way to backup my files to cdr/dvdr. I'd like to put a blank disk in when I finish using the machine, have it backup anything new, up to the size of the media and stop. I can put in new media the next day and I'd like it to continue from where it left off. It would be best if the backups are readable by any machine and I could extract specific files if a problem should arise. Any suggestions? Tar won't let me specify a final archive size and wants to do all the volumes in the backup at the same time.
View 9 Replies View Relatedwell, i know ther are issues when using rsync to copy files to ntfs partition like file permission blah blah. the thing is, i need to backup my music files periodically onto a ntfs partition from ext4. i really dont care about file permissions or any other stuff. when i use rsync, it should update the mp3 files on my ntfs (external) disc with the new ones.can i give a go with this operation? i have lot more important files on the external disc and i dont want this rsync corrupt or delete those files coz they are highly important files.
View 2 Replies View RelatedI am pretty new to using Ubuntu and want to find a way that I can backup files remotely to my Ubuntu box. My Ubuntu box is running at work and I want to backup files from home automatically every night.Also which solution encrypts the data en route? For example a server with multiple clients with different directory paths.
View 4 Replies View RelatedI am a beginner to Ubuntu / linux. I plan to partition my laptop (HP pavilion) for Windows 7 and Linux (Ubuntu). Can I backup both Linux and Windows 7 files to a single external USB hard drive? (Obviously, they will be in separate directories). If yes, how do I do that? If not, what are my alternatives?
I assume Ubuntu will recognize a USB hard drive as an external flash drive, right? I also notice external SATA hard drive docking stations with USB interface are available, and I have not use them before. The devices takes internal SATA hard drive. If you have use them before, let me know how did you format it using Ubuntu or Windows7 while the drive is attached to the station.
I had some problems with my hdd, I fixed most of the problems with "testdrive" or "testdisk" (cant remember) but I have some bad sections on my disk right where my important data is. I made a backup with "dd" from a live cd. I have the backup with a reading error or 5 so I guess most data is safe? I have the backup of the whole drive on an other hdd and now I need to get just a few folders out of it. I tried in windows but I can't read it. Poweriso can but not the privet folders like /var/ and that folder I need. I had a password on the account so I guess that is part of the problem? How to read the backup file in windows?
View 4 Replies View RelatedWe have linux base server in US. We have to take a backup of that server we access this server through SSH secure shell client software.so we have to take a backup of that server in our pc.can anybody tell us How we should take backup of all files in our pc.
View 5 Replies View RelatedI've been installing a fair amount of packages from slackbuild.org. Is it a good idea to backup the tgz files i get from building the .SlackBuild files?. I think this would save me time in case if i reinstall slack, then i can install these packages by doing just
Code:
Instead going through the whole:
1)Download source,SlackBuild script
2)Run SlackBuild script
3)finally installpkg if successful.
Will there be any problems with configurations if i don't do it from the beginning?. I thought of this because some packages took helluva time to download and compile.
I've been working at this for the past 2 days now. My computer got some kind of virus or something that has caused it to loop at startup and continually reset. I run an XP OS on a Gateway. I desperately need to backup my files, because the person who had my backup absently deleted my stuff. I was able to boot up using an Ubuntu disc and I'm in it right now, I've found my files, I have an external hard drive. The problem:First, it wont let me paste into the hard drive. If I drag, it says "Error while copying to "/media/FreeAgent Drive". You do not have permissions to write to this folder." I've mounted the external drive, nothing changes.
I've gone in to properties, is says under permissions that the owner is root, folder access is "Access files" and at the bottom is says "You are not the owner, so you can't change these permissions." The drop downs where I need to change permissions is in gray, so I can;t change it.So next, I tried "gksu nautilus", went to the drive through there, and it let me use the drop down selection under permissions. I tried to change the folder access and I got this message: "The permissions could not be changed. Couldn't change the permissions of "FreeAgent Drive" because it is on a read-only disk." So I tried changing the file access to Read and Write. It didn't give an error, so I thought perhaps it finally worked. I hit apply, and tried to put my files in. Once again I got the message from before that said I didn't have permission. I tried to change the owner so it was no longer root and I got "The owner could not be changed. Couldn't change the owner of "FreeAgent Drive" because it is on a read-only disk."I'm getting so frustrated right now. These files are VERY important to me! The hard drive I have is a Seagate FreeAgent desk 500GB
Having trouble running backup software to network storage. (Ubuntu 10.04 Beta)
I mounted my network drive (a Netgear Stora) with curlftps (tried several other ways, but this is the only way that works). It shows up like a regular HDD which I can copy files to in the file manager, but when I try running backup software only the folders are copied.
I've tried several backup programs, some based on Rsync, as well as Rsync itself, but they all had problems. Dj Dup kind of worked and was able to copy files (archives), but kept dropping the ethernet connection instead.
I clone my entire notebook hdd once a month to a USB drive with an identical disk once a month using dd. I would like to find a way to automatically or manually do incremental backups at shorter intervals.
The first problem is that my incremental backup drive is not the same as my full backup drive (which is my clone). Is there some way to backup or copy all files on a document partition modified after a certain date?
The second problem is that my document partition is NTFS-3G. I guess this could be done pretty easily using "dump" if I stored my docs on ext. [I don't because I want to make sure that my docs are accessible from any machine (say in an Internet cafe) should my MacBook die and I need to rip out the hard drive and run to do my homework on another system; that is why I keep my docs on my Vista partition].
Does ubuntu server automatically backup files? How can i get to them?
View 1 Replies View Relatedi find myself in a situation very similar to here. [URL].. when i try use boot a live disk off my flash drive, it gives me the same issue. right now, i was just wondering how i would be able to get all my files off of my hard drive and onto an external drive so i may just format and reinstall everything on my computer.
any tips on how to do a simple copy over through the busybox or intramfs?
I'm going to be launching my website soon, and I found a company to host it on one of their dedicated servers. I think I'm going to go with fedora as to OS, and well my problem is I'm having trouble finding a company to backup up my files, that both supports fedora and well is reasonably priced.
View 2 Replies View RelatedI have a situation where a directory has about 1.5 million files in it. On an hourly basis, I want to be able to find any files that have changed in the last hour, compress them, encrypt them and then copy them to both a local backup machine and an off site backup.
Is there any kind of utility or kernel module that creates some type of log of modified files? I know I can use find, but the search for -mtime in this directory takes quite a while and will not suffice for an hourly backup.
if there an application which does the following:
1. I have a laptop with an internal 200GB HD.
2. I run the application & it creates a list of all files (size & time-stamp) without actually storing them. Let's call this the "snapshot list".
3. I update some of the files on the laptop.
4. Now I run the application & it only copies the files which have changed on the laptop, that have different size/time-stamp from the snapshot list, onto some external media, such as a memory card. Of course, the files should be copied onto their proper location in the directory tree & not just pile up in one place.
Why is this useful? although the laptop has a 200GB HD I typically only update a small number of files, whose total size is maybe 10MB or so. If I could only backup those which have changed, I could do this with a tiny SD card instead of lugging around an external usb HD.
I have a clonezilla backup,.. and I'd like to grab some files from it without restoring the whole thing.
View 2 Replies View Relatedhow to disable backup files? It is kinda annoying when editing lot of files and I personally see no point having them.
View 11 Replies View RelatedI'm trying to create backup/archive my Ubuntu 10.04 system files (so I can restore it in case my system get corrupted). More specifically, I'm trying to zip the important files in my root directory not including my home directory (which includes my documents which I backup separately/more frequently) to an external hard drive attached via USB (called 'My Book').
Since File Roller didn't give me quite the level of control I was looking for, I created a script that I could execute to backup and archive regularly. Here's a snippet:
cd /media/"My Book"/"Linux Backups"
NOW=$(date +"%b-%d-%y")
LOGFILE=Backup_Root_FileSystem-$NOW.log
sudo zip -r -T -v Backup_Root_FileSystem-$NOW / -x /media/'My Book'* /media* /proc* /sys* /mnt* /dev* /cdrom* /home* /'lost+found'* | tee -a $LOGFILE
[Code]...
I wrote a script to wake up my windows machine and do an rsync backup of some of my files. I wanted to make this command a accessible through local bin so I made it executable. However the problem is that when I copies files is copies them with root permissions and i can edit or delete them. How can I set the files so they transfer with the proper permissions for my Ubuntu user?
Code:
#!/bin/bash
# Description: This script first wakes up the client machine and syncs the appropriate folders.
# Finally the script shuts down the client if it was off to begin with.
if [ "$(whoami)" != "root" ]; then
echo "Permission Denied"
exit 1
fi .....
I am using Ubuntu 10.04 x86_64. I log in to the machine using nfs. For a problem with mounting my home directory, I had to copy all the contents of my home directory (including all configuration files) from a recent snapshot on to itself. That is, I did something like,
Code:
cp -r /home/user/user /home/user
All of my recent data and program configurations were in /home/user/user. So after the copy operation, I logged out and logged back in again to see that all my configuration and data was restored to what I wanted. But the problem is that now on my desktop I see hundreds of mounted volumes. These are coming from an hourly/weekly snapshot program. The tech support guys for my lab have suggested copying all relevant data to a backup and then deleting the home directory altogether. But I don't want to configure all programs all over again. I think I should be able to get rid of the problem by editing/deleting one or more desktop configuration files. I just don't know which ones. I tried looking around the gconf-editor but was overwhelmed at the amount of information on there.
How is it possible to store and backup our files online? I don�t know that how this concept actually works. is there any kind of device needed while storing data at another location
View 2 Replies View Related