Ubuntu :: External Hard Drive Will Not Let Backup Files?
Jan 10, 2010
I've been working at this for the past 2 days now. My computer got some kind of virus or something that has caused it to loop at startup and continually reset. I run an XP OS on a Gateway. I desperately need to backup my files, because the person who had my backup absently deleted my stuff. I was able to boot up using an Ubuntu disc and I'm in it right now, I've found my files, I have an external hard drive. The problem:First, it wont let me paste into the hard drive. If I drag, it says "Error while copying to "/media/FreeAgent Drive". You do not have permissions to write to this folder." I've mounted the external drive, nothing changes.
I've gone in to properties, is says under permissions that the owner is root, folder access is "Access files" and at the bottom is says "You are not the owner, so you can't change these permissions." The drop downs where I need to change permissions is in gray, so I can;t change it.So next, I tried "gksu nautilus", went to the drive through there, and it let me use the drop down selection under permissions. I tried to change the folder access and I got this message: "The permissions could not be changed. Couldn't change the permissions of "FreeAgent Drive" because it is on a read-only disk." So I tried changing the file access to Read and Write. It didn't give an error, so I thought perhaps it finally worked. I hit apply, and tried to put my files in. Once again I got the message from before that said I didn't have permission. I tried to change the owner so it was no longer root and I got "The owner could not be changed. Couldn't change the owner of "FreeAgent Drive" because it is on a read-only disk."I'm getting so frustrated right now. These files are VERY important to me! The hard drive I have is a Seagate FreeAgent desk 500GB
I have installed luckybackup software on my ubuntu 10.10 notebook edition. But I don't know how to use it to backup files to an external hard drive. The Hard Drive is a 1 TB Seagate. I don't think that the Destination Drop down menu in luckybackup even shows the External HD.
but I have literally just starting using Linux (Centos) in the last week or so. I am using a standalone PC that is not networked, and as I will be downloading and generating a lot of data on this machine, I would like to regularly backup onto an external hard driveIdeally I would likethis to happen automatically as there will be other people using the machine.There seem to be many different ways of doing this, and I am getting a bit confused about the best method to use.
im trying to copy a file over to my external hard drive and its a 5.8gig file and i keep getting this error saying there was a file copy error and then i click show more details and says Failed to attach the file: File too large
I have an external harddrive of 500GB. It's almost fully loaded with TV series and movies. Nautilus says there's 60 GB remaining space. I just downloaded some movies, and copied it to this external hard drive.And here's the strange part, after I did this I only see a very small subset of all the movies I stored on that harddrive in nautilus. With 500 GB almost full, you can imagine there are quite some movies on it, but I only see 12 of them in nautilus.
I bought a new 2.5 inch SATA laptop hard drive and mounted it in an external enclosure for use as an external backup drive. I had a whale of a time getting it formatted (ref post), but finally did by putting the bare drive into a laptop and used Ubuntu to partition and format as part of installing. Then I remounted the bare drive back into the enclosure and sure enough now I can now see the drive.
So now I want to erase the files from the backup drive. Problem is, Ubuntu won't let me delete or add any files. In Nautlis, if I select the files and "right click", Move to Trash is grayed out. If I press the delete button, nothing happens. If I try to copy a new file to the backup drive it says "permission denied". If I go into the Properties .> Permissions for the drive everything is grayed out so I can't change the permission. It also says "You are not the owner so you cannot change permissions".
I am running dual boot Ubuntu and windows 7 but have decided to ditch windows and go permanently with Ubuntu. How do I save my data files (email addresses etc.) to an external hard drive for downloading back on to my laptop when I have reformated it.
when I try to share files off of my external hard drive over my network; it says it is shared on my ubuntu machine but when I try to access the file on my windows machine it says I do not have permission.
how to transfer large files from my laptop to external hard drive. Problem occurs when I'm sending Blu-ray films (4.4GB) to external, gets to 4GB and then comes up with error. Is there any way of breaking it up and then merging when it reaches the hard drive or is there a way of sending it as one whole file.
I would like to backup up my linux files to an external hard drive from a laptop. What would be the most simple and easiest way to do this? How would I format an external hard drive in linux.
I want to copy a .tgz file from my computer to an external hard drive. However, I get the following message:cp: cannot create regular file `/mnt/usbkey/ws_2008/misc/minipar-0.5-W indows.tgz': ermission deniedI get this error with any file I try to copy to the external disk. rnal disk is recognized, when I mount it, I can see the files and folder I have there, but seems that I cannot copy anything to it.When I try to copy the same files from my computer to a usb flash drive, everything works
I have two USB 2 external hard drives. I want to copy about 30 gigs of data from one to another. What command line command do I use ? I was thinking of using cp with the -R and -n options, but I have no idea what devices to refer to. I can't find any external hard drives in /etc/fstab and I'm not sure what /dev device each USB external hard drive uses. I just want to copy the files and the directories that they are in just as they are. There are no links and I do not want to do a backup.
Recently my laptop broke down and wont start up. I'm currently trying to recover my files to my mac with an IDE to USB cable. It recognized my windows partition fine and I was able to get all my files off of that, but the majority of my stuff is on the ext4 partition that I have on it. Does anyone know how to access the ubuntu partition of this hard drive from my mac?
I just lost over 300gb of files due to my external hard drive crashing.There was an error with the files system.I tried formatting on Slackware but cfdisk didn't work for me.I'm looking for something much easier with a GUI or something similar to the Disk Utility that you get in Ubuntu.And also which format do I format my external harddrive to?Something even more stable than ext4 or ntfs? Cause I do not want my external hard drive to crash again.
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
I was transferring some files from my external USB hard drive onto my laptop (running 64bit Karmic), and my laptop froze up for whatever reason.Everything on the screen stopped and the Scroll Lock and Caps Lock LEDs began flashing.Not knowing anything else to do, I hard booted off with the power switch.At this point, I was concerned if anything on either hard rive would be damagedI booted my laptop back up, and all seemed well until I trued to open my Documents folder.For some reason, Ubuntu will no longer open any folders at allI can't click on ComputerDocuments, Music, etc. When I do, a tab opens in the taskbar that says Opening folder. It stays on screen for about 20 seconds, and then goes away and the folder never opens.The weird part is if I open gEdit and try to load a file, I can see and get to everything.
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
My ubuntu login window seems to be chrased and seems no way to restore it. I was planning to move ahead with reinstalling it but could any1 tell me how can i copy data to external hard disk. I am in Mannual restore section with promt staying at root@ubuntu :/#
I recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code: sundar@sundar-sundar:~$ fdisk -l Disk /dev/sda: 120.0 GB, 120034123776 bytes
I'm just setting up a partition on a seperate HDD in my system. I plan to use the partition to backup the important files on my main HDD (to guard against HD crash).
The question I have is about where would be the typical location to auto mount this partition? Which would it be normal to go for:
Because a lot of users are using laptops now, and many want externals hard drives for backups, is there a program in Ubuntu (cross-platform with Windows would be nice) that backs up files to an external hard drive when the external drive is plugged in or on a timely basis? All backup systems seem to have a timed system, but these systems have annoying pop ups if your backup location is non-existant (e.g. Deja Dup).
Use case 1: I plug in my external, the program recognizes that and starts a backup.
Use case 2: I leave my external in all day and every 6 hours, my laptop backs up my files to it.
I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
I have 350GB external Western Digital USB hard Drive.When I try to remove it from the system by executing Safely Remove Drive menu the fedora 15 system gets stuck.The processor starts giving a hum sound and it goes on even if it is left for half an hour in the stuck state.The Mouse is not working and everything is halted.
I've been struggling with the problem of scanning an external drive that is used to store the backup from a Windows 7 machine. The Windows 7 machine was infected but the user continued to backup to the external drive. He has since formatted his machine and reinstalled Windows 7, but now he would like restore whatever he can from the backup on the external drive. I've been attempting to scan the external drive for viruses using ClamTK by connecting it to my laptop running Ubuntu 10.04, but it has not worked. There is supposed to be about 10 gigs of backed up data, but I haven't seen any. I don't know why it is not mounted.
i have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..
