I'm looking for an application that will allow me to setup reminders so that I don't miss a payment, birthday, etc. Is there a way to do this in Google Mail? I don't use any e-mail app.
View 2 RepliesI am just looking for a simple program, nothing overly complex with crazy features. Just something that pops up above any browser/window and remains that way until you click it or something. The pop up would occur periodically or at sometime each day. It would say something like "TAKE A BREAK FROM COMPUTER" lol and other things. not suppose to be some full reminder program like a calendar.
View 2 Replies View RelatedI need to come up with a script that restarts every month, and sends out a reminder 5 days before the end of the month to all customers on the list with rentals. After 10 days, if their name hasn't be deselected, it will send out a last notice email to remind them of their contract and yada yada. I'm not sure if a web-based script (php) would be better, or a "regular" language like python or something.
View 1 Replies View RelatedFirst off, I'm completely new to bash scripting so forgive me if I make any egregious errors. I'm trying to make pop-up reminders for the simple calendar program when. This is what I have so far:
Code:
#!/bin/bash
# set the time format for when
#current="$(date +%I:%M %p)"
current="$(date +%-l%p)"
today=~/.when/today
[Code]....
When I run the script, gxmessage pops up and displays the correct information, but it does so for each line in "~/.when/today" that contains a time that matches the current system time (which would be three pop-ups at 10PM, according to the example). I want it to display the information only once. How can this be accomplished? Is a while loop even the right job for this?
I am wondering if there is a basic tool out there that will work with graphics card powered by FOSS drivers that allows to adjust resolution (and configure secondary monitors) and then save that configuration so it can automatically be restored next time the system starts up
View 3 Replies View RelatedI have a command line OCR program called OCR Shop XTR (Vividata corp) that I am using on a system with a 6-core AMD chip. I changed the bios so that the 6-cores were activated, but htop shows me that while the program is running, I am only getting activity on one core (the program maxes out the one core with consistent usage between 97% and 100%).
I have read that many programs are not written to take advantage of multiple core cpu's. However, I am just hoping that there is some way to get this program to take advantage of the extra cores. Does anyone know of a way to invoke programs from the command line which would spread the workload out among additional cores?
Here is the output of uname -a:Linux linux 2.6.37.1-1.2-desktop #1 SMP PREEMPT 2011-02-21 10:34:10 +0100 i686 athlon i386 GNU/LinuxAnd here is the output for one of the cores from cat /proc/cpuinfo:processor : 5
vendor_id : AuthenticAMD
cpu family : 16
model : 10
model name : AMD Phenom(tm) II X6 1100T Processor
stepping : 0
[Code].....
application to monitor application wise network usage?
View 3 Replies View RelatedHow do I make an application launcher in the panel launch more than one application? Is there some sort of a symbol I type between the apps in the command line? Like ;
View 1 Replies View Relatedwhen an application is opened or minimized the icon of that particular application is not showing up in the top bar of ubuntu 11.04...how can i see the icons in the top bar?
View 1 Replies View RelatedI have installed Redshift But do not know what to do Next.There is no icon for the application or anything to launch the application.
View 1 Replies View RelatedI've downloaded VideoLan (VLC) via Yast but the icon was placed in the audio folder. How do I move it to the video player folder? Also, where are additional icons stored? I run SuSE 11.2 (boxed version) with KDE.
View 9 Replies View RelatedI am getting no packages listed in Gnome application manager gpk-application 2.27.2. I have tried 'yum clean all' and get the following error messages.
View 3 Replies View RelatedSo, I have this application called Impact, it is an explicit time integration Finite Elements code written in Java...
[url]
I untar the pack, and launch the application calling a script, from within the untarred folder,
Code:
This launches a gui which allows me to setup a case, which needs some setup file, tipically some *.in and a mesh file, tipically some *.msh.
Other mode of executuion consists of calling the setup file as argument to Impact.sh script ( CLI execution mode, for g33k5 )
My problem is : I have packed the whole stuff into a Slackware .tgz, that places it in /usr/local/Impact, and placed a calling script in /usr/local/bin,
Code:
Code:
I decided to hack the ImpactGUI_OGL_linux_amd64.sh script from
Code:
Code:
no avail,
Code:
even after adding /usr/local/Impact/bin to PATH... won't go...
I can run this thing from within its directory... but I do not like messing within the directories of my applications, this is why I sent this to /usr/local, and placed a calling script in /usr/local/bin...
I am trying to troubleshoot an application that is generating several segfaults with an error 14, but the application is not crashing.The program continues to run. I would assume I can connect to a running process to debug it, but I'm not sure what to gather. The program has several background processes associated with it so I'm sure I'll need to attach to the actual internal process. Does anyone have any experience in this to offer some insight?
View 3 Replies View RelatedI would like to get the predefined application icon to open the same file types.
for instance: *.avi, *.mp3 to have the VLC icon
and other application to have the icon of their default application.
So far I only found tips to install single icons or to add icon packs. :S
and is there any way to when you install an application make it default for such file types ?
I ended up setting up a basic linux file server as a pdc for that office. Our main office is a windows 2000 ads domain. The two offices are connected with a vpn. I only have two users at the new location so I simply have the linux and samba usernames/passwords setup manually. I would like to know if it is possible to setup a domain trust between the two sites so I don't have to create a username/password in the remote site for every user at the main office to access. I did some searching but came up empty.
View 5 Replies View RelatedI want to setup a FAI server for which I was looking for the best method of mirroring the Debian Lenny. I want to setup a local mirror with the best method available for mirroring. If it is ftpsync, please provide me some best ways of doing it. I tried ftpsync mirroring but that was not getting properly working due to insufficient I want this mirror to be accessible in my FAI setup so that I can start the installation on multiple machines and start the updates and package installation to be done from the same local mirror.
View 1 Replies View RelatedI've been all afternoon trying to install Ubuntu Lucid on my fakeRAID 0 configured (2) HDDs and am unable to set GRUB up. The fake RAID setup is provided by Intel Matrix Storage Manager, it is correctly enabled and the BIOS is also correctly set up -- in fact, I've managed to install Windows 7 with no significant hitch. After struggling with partioning the drives (had to follow advice I found on a very helpful guide online [0]), creating the filesystems AND getting Ubuntu's installer to actually do what it is supposed to do, I now cannot seem to set GRUB up. My system, as it stands, is unbootable at all; via live CD only.
This is how the RAID0 dev is partitioned:
Code:
# fdisk -l /dev/mapper/isw_ecdeiihbfi_Volume0
Disk /dev/mapper/isw_ecdeiihbfi_Volume0: 1000.2 GB, 1000210694144 bytes
255 heads, 63 sectors/track, 121602 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 131072 bytes / 262144 bytes
Disk identifier: 0x6634b2b5 .....
Im trying to set up my workflow to a terminal-based setup, so that accessing my computer through SSH will provide many of the things I need and use right off the bat. I have Mutt working great with my GMail account, so that's good. I do have a question though. Using the application Calcurse (featured on Lifehacker a few days ago, [URL] I am at a loss to figure out how to interface with Google Calendar. Is there a trick that Im missing, or does anyone know of another terminal app that plays better with Google Calendar?
Also, I was looking for a 'Digital Clock', essentially, again, a terminal/text based large print clock; similar to the one in the lower left corner on the attached pic. I was looking for a telnet server from the Atomic Clock, but no such luck so far.....
i am trying to install openbravo on my server.I have installed all the pre-requisites as ANT, JDK(though i installed JRE).
Everything goes fine untill the ant setup and then running the setup-prerequisites...file (don't remember the exact name).
As soon as i issue ant install.source it ends up with some errors..
So I didn't notice when I setup my CentOS 5.5 server that I left / as RAID 0 on md1. All the rest are RAID 1. Is there a way I can modify the array to RAID 1 without a risk of data loss? I'm glad I caught this before I setup any other services. I've only setup smb so far...
[root@ftpserver ~]# df -h
Filesystem Size Used Avail Use% Mounted on
/dev/md1 16G 3.0G 13G 20% /
[code]....
Im trying to setup multiple domU through the default bridge setup. I am able to access only one of them through the network at a time. If you ping one of the domU it works perfectly but you cannot ping any of the others until you stop pinging the one and even then it takes a bit before you can. Ive looked around for a while and seen similar problems but nothing ever seems quite the same. Im probably missing something really stupid. Or is this the way the bridge is supposed to behave? Do i need to use a routed virtual network?
[Code]....
Here is a thought experiment:
1. Copy vmlinuz and initrd.img from isolinux subdir into /boot
2. Adjust grub.conf to boot to that kernel
3. Reboot to setup
4. Format /boot (actually '/' ) during "fresh install"
5. Proceed with the installation-over-network
I see two possible outcomes:
1. The setup fails to reformat the drive, because it is "in use" by boot kernel
2. The partition is not "in use" and the installation succeeds
Why? Old cluster with broken CD-drives, lacking USB, and no separate /boot partition.
With new installs of openSuse 11.4 I've hit a printer problem. I can run hp-setup (or hp-toolbox) for the wireless Officejet j6410 and it is recognised. The right driver is selected. Then when I choose add printer it all falls over with the error message: error: Printer queue setup failed. Could not connect to CUPS Server Is user added to "lp" group(s) error: Fax queue setup failed. Please restart CUPS and try again.
The user is added to the lp group. I have this problem with my 64 bit desktop and 32 bit laptop installs of 11.4, it all worked perfectly in 11.2. I've used the Cups web interface to set up the printer now and can print from both machines, but I would prefer to use the hp-toolbox, which has several convenient features. Where do I go from here?
I am trying to setup a 5 monitors setup using 3 cards, but I am stuck at 3 monitors for now. The third card is not plugged yet, so the current setup is:
NVIDIA 8800GT (binary driver 195.***)
--->1680x1050 LCD (VGA)
--->1680x1050 LCD (DVI)
ATI HD5450 (3 output, but I think the OSS driver only support 2, corrdct me if I am wrong) (OSS driver)
--->1280x1024 LCD (DVI)
---> 1366x768 TV (VGA)
[Code]...
I'm using Ubuntu 9.10 and previously had a separate partition with another distro on it. I decided to delete the other distro's home and swap partitions and install XP in place of it. I've been following these instructions: [URL] and [URL] I have gotten to the point where I am booting to the XP CD and want to install it, but I get the message, "Setup did not find any hard disks installed on your computer" when I should be getting to the screen that asks me to select a partition to install XP on. This is what my HDD looks like in GParted:
I want to install XP in the unallocated partition, but I have a feeling I screwed up somewhere along the way and probably don't fully understand the whole thing. Even if I try to format the unallocated partition to NTFS I can't make it a primary partition (I assume because it's within sda2). The very last thing I want to do is delete my Ubuntu partition and start from scratch, but if that's my last option let me know.
I have a load balancer with 2 web servers behind it. The web servers rsync with cloud storage to update their apache directories 1 time every hour. Apache is just running php pages that pull/push data to a DB so they dont need to be updated that often. However I need to figure out how to implement a Master/Master MySQL setup to have my web servers point to for the PHP stuff. I need to implement it without having a single point of failure. The Load balancers are useless for failover as they only detect availability based on Ping request. So putting a master/master setup behind a Load Balancer is out. what is the best way to setup the master/master mysql in a HA setup without the use of a load balancer provided by the host?
View 2 Replies View RelatedI'm trying to take my current windows7 (x64) setup and make it into a dual-boot setup with slackware 13.0 (x32) and am hitting a brickwall. I guess I would like to know if I can salvage the situation without formating my windows drive. I fully intend to, but I had hoped to not do it this month. I'd like to get dual boot going so I can master it and acquire all the files/drivers I'll want and then format and do it 100% right next time.
Currently I have windows setup on a 3x 500gb Raid0 onboard array which itself has been flawless. After I shrunk my current partition size to give me about 25gb of free space I proceeded to setup Linux, and I was unable to perform the cfdisk portion for partitioning the array for Linux.
I tried using cfdisk:
/dev/hdx (a1-a3,b1-b3)
/dev/sdx (a1-a3,b1-b3)
I even attempted to locate with: cat proc/partition and tried using cfdisk on every device it located. It always said it was either an unknown partition table and should I start at zero, or bad partition. I was of course too concerned over my windows setup (which has almost 1tb of stuff I have not backed up) to go any further into the unknown.
PS: I have used Slackware before, back at 8.1, 10, and even a very brief interlude at 12.0, this is my first attempt on this computer however with 13.0, it is currently running fine on my laptop and my PS3 (Laptop is even dual booting 7/Slack13. Albeit without raid)
Phenom 9850
M2N-SLI Deluxe (Nvidia AM2)
4x1gb of 1066 kingston hyperX
3x500gb WD Caviar Black Sata2 3.0
I'm trying to use the set application to configure Apache. I'm getting a "setup: command not found" error when I type in "setup" at the command line.
However when I try to install setup with yum, it tells me that setup is already installed.
I'm logged in as root. CentOS 5.5.
We are trying to set up a NIS server on a CentOS system. We need to have a NIS server which can provide NIS authentication to a couple of clients. We are practically new to all this stuff.
Just googled to find some ideas about installing ypserv and ypbind and portmapper. We did all that and also started them successfully. But now the clients are not able to join to the NIS domain . The error log states "YP_DOMAIN NOT BOUND".
I guess we have not entered the /etc/yp.conf, /etc/hosts files properly. Please let us know the detailed steps to setup a NIS server .
Also, please let us know what entries should go into the different /etc/<file_names>? What is meant by HOSTNAME in the /etc/hosts file?
Is there any other files which need to be changed? Are we missing any steps?
Also to add-on, while executing the ypinit command we faced the following error:
At this point, we have to construct a list of the hosts which will run NIS servers. localhost.localdomain is in the list of NIS server hosts. Please cont inue to add the names for the other hosts, one per line. When you are done with the list, type a <control D>. next host to add: localhost.localdomain next host to add:
The current list of NIS servers looks like this:
Is this correct? [y/n: y] y
Error running Makefile.