I have tried several versions on my netbook and all fail to boot unless i hold down the enter (return) key on the keyboard then it will load slowly i have also tried meego which does the same thing but i want to use UNR 10:10 without having to sit holding the keyboard for 2 minutes.
Toshiba NB200
Windows 7 Installed too
UNR 10:10 (have tried 9:10, 10:04 and 10:10)
I just upgraded to F15 and it went well. But at the next and each subsequent cold boot the BIOS reports "Your system last boot fail or post interrupted Please enter setup to load default and reboot". The board is an asus P5N-D. I press F1 to blow past the error and all is well until the next cold boot. Restarts are fine, no errors at all.
View 12 Replies View RelatedI just bought this desktop from my friend and it runs win 7 and ubuntu 10.04. it worked very well the first two days until I changed the hostname of the system.
I did like: hostname myNewName
And everything worked fine. The problem now is when I start ubuntu and and reach username and password screen , I enter my password to login the screen becomes black and return me again to the screen where I put my password again. If I entered wrong password , the system message stating wrong password. On the other hand, when I try to run ubuntu from live-cd I can login easily and access my account.
My friend told me he removed Naultius package and reinstall it for some reason before he gave it to me. Note windows 7 is working properly.
I trying to write a UART(interfacing of serial devices) to linux machine but after I execute the following code to receive data I need to enter key (carriage return).... but I don't want to remove carriage return/enter key
[Code]....
I'm using the Readhat Linux Enterprise 5, and I encountered a problem about captured keyboard need your help. I log in after entering the required username and password using keyboard, but then the keyboard is captured, i.e., I can not enter anything using keyboard. Meanwhile the mouse works well all the time. I encountered this problem when I pressed some keys wrongly two days ago, but unfortunatelly I can not find out these exact keys I pressed.
View 7 Replies View RelatedIs there a way to show GRUB 2 interface only if you hold ESC at boot? If I remember well you can do it with GRUB 1.
View 3 Replies View RelatedSo, for some reason the right side ENTER, period, semi colon, SHIFT, and UP, Down, Left arrow keys have all stopped working on my laptop. I just set up a dual boot with windows xp, and ubuntu.
I checked under the keys, and cleaned them, and no problem. This wouldn't be that bad of a sutuation, I could just re-map the keys. However, when my computer starts, and I enter Bios > Bootloader, I get stuck.
I can use home/end to move up and down, but no way to select which OS I want. I have to plug in a USB keyboard to get into my OS. I don't want to be carrying around a keyboard, otherwise I wouldn't have a laptop.
So, I either need a different bootloader which can use some other keys, or I need a way to remap the enter key all the way back at the bios, so I can trick it and enter my OS,
Edit: Actually, I'll probably need a new keyboard. Ubuntu is pretty good with battery life, so I could boot into ubuntu, then hibernate. So, I need a good key mapper for Ubuntu
How do you enter your password terminal the keyboard doesn't work when I try
View 2 Replies View Relatedthis may not be the right place to ask this, but my sister has a macbook and the keyboard does not want to work. i have looked online and i see that the main cause of this problem is in Leopard (correct me if im wrong). So i was wondering if perhaps using linux would solve this problem or if the problem is more hardware related than os related.
Also, how would i go about booting into a linux cd? since u need to enter some keyboard keys at startup and assuming that won't work, is there another way?
As my ubuntu 9.10 boots the mouse and the key board fail and screen is inactive. Previously working OK.
View 5 Replies View RelatedI had a hell of a time getting 10.04 to work, because I only have a Logitech Dinovo Edge keyboard, and it stopped working after I upgraded. After grub, I'd get to the login screen, and the keyboard wouldn't do anything.
First, I dug up a mouse that did work. Then I logged in by clicking the Human Accessibility icon on the login screen. Somewhere in there, I was able to bring up an on screen keyboard. With the on screen keyboard, I could now login. Under system>preferences>bluetooth, I was able to, after some fiddling and plugging and unplugging, get the keyboard paired to the bluetooth dongle. Anyway, it seems pretty obvious now that my original bluetooth pairing was lost with the 10.04 upgrade, and I just needed to re-pair. I don't remember having such problems on previous upgrades, though.
After some updates Jessie 8 my boot grub shows now 2 kernel versions to boot from.
3.16.0-4-amd64
3.16-3-amd64
- How do I know which one is the newest and if happy with it, how to remove the older one?
When attempting to install FC12 x86_64 on a Dell Optiplex 760, my USB devices stop working after initial boot. I see anaconda, but am unable to change anything since my keyboard, mouse and any other USB devices are not powering up after kernel boot.
View 13 Replies View RelatedI am almost brand new user of Ubuntu 9.10 loaded using Wubi. After an update I can no longer boot from the highest version (-20-generic), but have to start from a previous version (-14-generic). How do I clean up the boot image/configure grub (v 1.97 beta which I believe is Grub 2)?
View 2 Replies View RelatedI just write a script that check some thing. and I use
Code:
read -p " enter : " chk
it executed. but if a user use "Enter key" on keyboard it cant continue and finish.
Computer: Toshiba Satellite Pro L510 laptop, 10.10.This has always happened but I have gotten around it by time-out and putting my menu.list in order. When I first boot the machine (switch on for the day from computer being off) I get to the grub options to select a kernel and I have no keyboard. No up/down arrows so have to go with the kernel on top of the list (not always desirable).
When I get to the log-in screen if I hit restart and go back to the grub screen I have a keyboard and can select any kernel. If I login to the kernel I have full keyboard, no problem. If I then restart, I have keyboard at the grub list.
Nutshell: It is only when starting the computer fresh that the keyboard is dead at grub menu (and then only). Any time after that, once the computer has been switched on, if I restart I have keyboard at grub menu and can select different kernels. (Of course, if I switch the computer off and back on again, no keyboard ...)
I have several pc's with Lucid and Maverick many of them with onboard 3G modems. They all function excellent. On my Lenovo X301 i have installed Maverick from scratch. After install I have to enter the PIN to my 3G modem at every login or wakeup from hibernation/sleep. I have to enter this even if i have disabled the 3G radio in NetworkManager
In NetworkManager i have entered the correct information for my 3G supplier as well as the PIN for my 3G access. I have not marked automatic start to my 3G connection in NetworkManager I rarely use the 3G as i'm normally connected through WiFi so it is a bit annoying. When i had lucid installed on the same pc i didn't have this problem. How do i turn this PIN entering behavior off?
I am pasting sudo commands without problems as a user (ales in my case) and then immediately the ask the user password.
The keyboard seems to be dead, no keys work, not allowing me to enter the password.
Succeeded in connecting to internet using my wll phone. I can now connect using 'wvdial' command in root terminal. But I want to connect through terminal. I tried 'sudo wvdial' command. Then I am asked for my password. But I cannot type my password there. When I type, nothing appears on the terminal window. Ofcourse there's no problem with my keyboard.
View 5 Replies View RelatedSo when i boot up into grub why dose it show 2 versions of ubuntu something like this
Ubuntu, with linux 2.6.32-22- generic
Ubuntu, with linux 2.6.32-22- recovery
ubuntu, with linux 2.6.32-21- generic
ubuntu, with linux 2.6.32-21- recovery
I've recently reinstalled all the os's on my computer, just now I'm going with ubuntu (general use) win xp (for flash, it doesnt play nice with 7 for some reason) and win 7 (for games). Everything is fine, but I can't get grub to boot me straight into either of the windows versions: Each option makes brings me to the windows bootloader, where I can choose between "Windows 7" and "Older version of windows". I want to go directly from grub to xp/7, without that extra menu. How do I get rid of it?
Using ubuntu 9.10. I snooped around and found a script to run that should give some helpful information:
[Code]...
My Grub2 boot menu includes:
Ubuntu, Linux 2.6.31-19-generic
Ubuntu, Linux 2.6.31-19-generic (recovery mode)
Ubuntu, Linux 2.6.31-14-generic
Ubuntu, Linux 2.6.31-14-generic (recovery mode)
Q1) I only really need the latest kernel, 2.6.31-19, don't I?
Q2) So how can I get rid of the two 2.6.31-14 entries?
I have a MacbookPro 5,1 with 2GBRAM, which successfully dual-boots with Ubuntu 9.04 since a year. I wish to urgently install ubuntustudio, and also wish to have one or perhaps two more partitions, where I may install the latest Ubuntu as well as another Linux distro.
Typically, think of a multi-boot scenario:
Mac OSX 10.5.x
Ubuntu 9.04 <<--working production install, not to be messed.
UbuntuStudio 10.4
Ubuntu 10.10 [just a few days left!]
Fedora or Knoppix or Debian.
if possible, i'd also like to keep one partition free and unallocated, or reformat a partition, if i ever need to install windows. any thing i'd need to watch out for in this? I've got no extra or free partitions, only free space on the mac partition, that i'd like to carve out and allocate to partitions. Also, before i begin, is there a way I can clone my entire mac+linux hard-disk so in the event of a failure i can get *everything* back, mac as well as ubuntu? I bought a hd of an identical size, but use it with Time Machine. I'd rather use it to clone the entire hd.
I've just upgraded from 9.10 on a system that has an encrypted root partition encrypted using the following guide:
[URL]
On boot, prior to the LUKS password prompt, I see the error:
Code:
cannot open file /etc/console-setup/boottime.kmap.gz
The consequence is that the keyboard does not respond, the password cannot be entered, and the root partition cannot be unlocked.
This behavior occurs on all 2.6.32.x kernels but falling back to my previous kernel, 2.6.31.9-rt works just fine.
This is on a production system and is not running in a virtual machine, so the issue is not:
[URL]
I have tried running sudo dpkg-reconfigure console-setup, which does regenerate the initram-fs for the desire kernel, but it does not solve the problem.
The guide's initram hook includes the lines:
Code:
mkdir -p ${DESTDIR}/etc/console-setup
cp /etc/console-setup/boottime.kmap.gz ${DESTDIR}/etc/console
... but my understanding of the initram stages of the boot process are hazy and I am unclear what the intent is behind the lines.
I installed f12 few days back. A pop up came which mentioned '336 new updates available' and I opted 'install only security updates'.
Now in the boot screen 3 options come instead of 2:
1. Fedora 2.6.31.6-166.fc12.i686.pae
2. Fedora 2.6.31.6-127.fc12.i686.pae
3. Windows
I am able to boot into both versions of fedora, but I cannot launch firefox it says-'your version of SQlite is too old and the application cannot run'. How do I correct the screw up. Should I re-install the whole thing....? why is it showing as 2 versions....? I installed yumex recently, is it the reason.....?
i used to use ubuntu 9.04 on my lap compaq 515, it worked well. But on upgrading to the higher versions(9.10, 10.04) the system failed to boot. Whenever i tried to install, the laptop would freeze and just show a blank screen. The Configuration of my system is below
Processor-AMD Athlon X2 64-bit
RAM- 1.7Gb
HDD- 150Gb
Graphics Card-ATI Radeon 3200 HD Graphics (256MB)
Is the problem actually with the operating system?. Does the new versions of ubuntu support this configuration or not?
I'm not to clear on the difference between LTS versions and other versions, but think I may want to go with LTS. Can someone tell me if my thinking is correct given the following situation: I have some very cool, but very expensive software installed with a group license from my school, a school which I am not going to be attending for too much longer. So I want to go as long as possible without reinstalling Ubuntu, because once the product is licensed it will be licensed until I reinstall Ubuntu (or I uninstall the program). So I think this is going to require me keep the Ubuntu version I install as long as possible.
So in this case, should I go with 10.04LTS or should I just install Natty Narwhal and keep that as long as possible? It looks like 10.04LTS will be "supported" longer, but I'm not exactly clear on all that "supported" entails. Presumable it means security and software updates will be available for 10.04LTS for much longer than 11.x versions? So I'm thinking I should go with 10.04LTS
Is my thinking correct in going with 10.04LTS? Edit: It was pointed out that this would be against my contractual agreements. Which I suppose is probably true.
I have a Toshiba Satellite A45-S120
1.26 Ghz Celeron
1.256 GB Ram
40 GB HD
I am trying to use a Toshiba Recovery CD to dual boot 2 versions of Windows XP on the same hard drive. I partitioned my hard drive with GParted, but when I go to do the 2nd install, it says the entire hard drive will be erased. I read in another forum that it may be possible to make the 1st partition invisible or non-bootable;[URL]...Is this possible? I can choose the flag in GParted to "hidden," but I am worried, because if GParted can see the partition, then perhaps the Toshiba Recovery CD can too.
Also, I have several other partitions running Linux, and for some reason GParted won't allow me to select the flag hidden - which wouldn't be the end of the world as I recently installed those linux partitions, but most importantly, I don't want to loose my primary XP partition.
My Toshiba Recovery CD also has Office and Works on it, so I want to at least use this to dual boot 2 versions of Windows XP on the same hard drive. What would be the best way to change the master boot record or hide the other partitions and use the recovery CD?
I have downloaded the Damm small linux iso ,and burned the image to the CD with infrarecorder .But when i try to boot it from the CD ,I get the DSL logo and press enter to boot ,then the computer freezes with two small penguins in the top left corner of the screen.
View 7 Replies View RelatedI used btrfs, but my Slackware root is really a subvolume named system and not the root of btrfs. I do a similar setup of having the OS's root in it's own filesystem on FreeBSD+ZFS.Anyways, my problem lies in mkinitrd. There's no way to enter extra boot options, as I require subvol=system to be added to mount -o ro -t $ROOTFS $ROOTDEV /mnt.in the init script of /boot/initrd.gz. I don't reboot often and it's easy to manually remount /mnt with the correct options, however, is there another way of passing boot options to mkinitrd?
I see Patrick is the author of mkinitrd, so maybe this kind of option could, or maybe should, be added? I'm sure most people wouldn't make a subvolume for the OS's root, but I've been use to it with ZFS and prefer it for some reason.