After upgrading to 1.2-rc7, sound stopped working in WoW. Switching between OSS and alsa has no effect.
Others are having this issue: [URL]
Is there any easy way for me to downgrade to the last version? Hate to have to install from source.
I just updated my kernel from 2.6.32-21 to 2.6.32-22 today. Now I am getting no sound. I have checked my mixer levels with both kmix and alsamixer. Nothing appears to be amiss. I tried rebooting with the old kernel and still no sound.
View 2 Replies View RelatedI don't know if it's just my system, but after applying the latest Wine update, the mouse cursor in Wine windows is now purple/magenta/pink, whatever. Not a big problem, just annoying. I've looked through the various config files in ~home and /usr/share/wine, and can't find any parameter that might even remotely address this.
View 4 Replies View RelatedJust upgraded to Karmic using the update manger. After the update, sound is no longer working. When I go to system>preferences>sounds and go to the Hardware tab it says there are no devices to configure.
View 5 Replies View RelatedI am having an issue with phpMyAdmin on my Xubuntu machine. I installed a few updates today and now my phpMyAdmin web interface site is not loading on the server. This is a local server running in my office. It appears that the page tries to load, but no output is delivered to the screen.
Taking a closer look at my updates, it looks like the following changes were made (along with some upgrades to Firefox):
When I use the 'Force Version....' command, I am given only two options the '4.8' version that I have now (the broken one) and a flat '4' version with no .7. Also, the force version didn't seem to do anything. I tried to Force a version and then mark a package for reinstall. When I did this Synaptic informed me that it was simply going to reinstall the 4.8 version.
What I would like to do is to revert to the 5.3.2-1ubuntu4.7 version of all of these files and then lock the version using Synaptic, to prevent this issue from recurring.
I am not afraid of heading to the command line either.
System Information:
32-Bit Xubuntu 10.04 LTS install
Athlon 3800+
2GB Ram
In ubuntu 10.04 my X-fi Fatal1ty Titanium sound card worked for my speakers but I had to use onboard sound for the mic. When I installed 10.10 the sound card no longer works at all so I have to run the speakers through the onboard sound.
The second problem I have is that Skype will not pick up my microphone all other programs seem to be able to record from the microphone just fine but skype does not. Ive tried selecting all the different input device options from the skype settings but none of them seem to work.
EDIT: Sound doesn't work at all in wine.
EDIT2: The X-fi card no longer shows up in the sound control panel.
I have had a problem with none of the microphone inputs working after upgrading to Ubuntu 11,04 64-bit on my Toshiba A665 laptop with 4-core Phenon processor. This includes the internal mic, mic jack and Logitec C610 webcam. All worked before upgrading to 11.04. The broken mic input means no Skype calls.Today I noticed that there was an application called EarCandy that is suppose to add functionality to PulseAudio, so I installed it to see if the auto-detect features would fix my mic problem.
EarCandy completely broke the two apps I tested: Skype and RadioTray. Now neither will output sound. The Ubuntu start-up desktop sound scheme also quit. So it seems that EarCandy killed all sounds that heard while it was briefly installed.How do I get sound output back on Skype and RadioTray? how to fix my mic input issue?
I just updated to emacs23 from emacs22 (sudo apt-get install emacs2). I find that I now have a problem with org mode structured lists not appearing. A single asteriks on a line by itself no longer appears highlighted and no longer collapses and expands using the tab key.
View 2 Replies View Relatedi upgraded my kernel to the latest version that being linux-image-2.6.31-19 and now when i start my linux box i get the grub shell. this problem happend once before but i only had to run the command: sudo update-grub2 and everything turned back normal. now even though i run the command everytime i restart my linux i get the grub shell.
Firstly my gdesklets have gone, and if I try to run gdesklets then I get a blank window in the top left corner, followed by another blank window in the centre which disappears, then the first one fades to gray.
Secondly, clicking the 'running man' to exit just closes both gnome panels.
Ubuntu 8.04 (2.6.24-25)I know 8.04 is pretty old now, and I should probably start over, but it was all fine until this latest update.
Posting from my Windows 7 system. Once again an Ubuntu kernel update has broken X. Once again I cannot get into Grub2, despite putting in the hacks to lengthen the time it listens. I don't need instructions on how to fix it from Live CD. I'm going to try Gentoo or something, anything, different. I need a Linux distro that can survive regular updates and boot to desktop reliably.
View 1 Replies View RelatedI am running Ubuntu 10.04 and ran the normal weekly updates last night. There were kernal updates listed but they have run alright before so I went ahead and let everything update.
On restart my Nvidia drivers would not load, so I restarted in low graphics mode. I uninstalled the Nvidia driver (with the intent of reinstalling them) but decided to restart before I reinstalled the driver (windows habit). upon restart I was told (in a very small box) that Ubuntu was running in low graphics mode.
I clicked ok and it proceeded to load, but it loaded it in regular mode and only the right half of the desktop is visible! It is like it is cut totally in half! And I can't get to the important side with Admin and Preferences. I tried boot options but that just gets me a very small colored box. There are no options when it boots just 3/4 of a box that says it is running in low graphics mode because "unable to load module "fglrx" module does not exist". I can not try and reinstall the Nvidia drivers because I can't see the part of the desktop that has Admin on it. I have used Ubuntu for several years now but have not used the terminal very often.
I did the latest update last might, 3-24-11, and I woke up,to find my system completly broken. There is some weird new startup and nothing starts, absolutly nothing. I'm typing from my phone now. I'll try some troubleshooting soon but I may just reinstall.
View 1 Replies View RelatedIn Lucid, Logitech Pro 9000 webcam worked fine until the kernel was upgraded to 2.6.32-24 recently. The usb sound was not listed in /proc/asound/cards. I had to boot from 2.6.32-23 to make it work.
UPDATE: the recent upgrade to 2.6.32-25 fixed this problem.
I upgraded my ubuntu installation from 10.04 to 10.10, now surround sound (5.1) does not work in xbmc, or in another player such as vlc. Only the front two speakers work. I noticed pulseaudio and alsa are installed. I thought i removed pulseaudio once before but cant really remember. In the sound configuration preferences thing (prefs >> sound), i have hdmi output selected (hdmi goes from the HTPC to the amplifier). It only plays audio in 2.0 instead of 5.1. I tried selecting the analog 5.1 sound option, but none of the test sounds work. However i noticed vlc still played movies with audio, but only stero no 5.1.
Previous to the upgrade, i had 5.1 working fine in xbmc, never bothered to check vlc since it was all good. Also, when i go into alsamixer, it does not show any rear speakers, it just shows a front speaker and a bunch of other stuff, like headphones. I'm not sure what other output you guys need, but let me know and i'll get it. Here is the alsa-info.sh output for my HTPC: [Code]..... Another note, after i reinstalled pulseaudio the first time, vlc fails to display a 5.1 movie and still plays tero output.
I just did install the updates as they showed up with the Update manager, and now the themes are "broken." On startup, all windows are themed with the Redmond theme. When I open the Appearance dialog, some windows' theme come back. But nautilus still uses the Redmond theme (I'm not running it as root either). The icon theme is totally not taking effect. It's using the ugly gray icons regardless of what I have chosen. This all happened right after the latest update on Karmic, and after I've reinstalled my NVidia driver which breaks after every kernel update. I think it was a kernel update because the number of lines at the grub menu seemed to have increased.
View 2 Replies View RelatedThe update manager told me there were several packages to update, and I as usually said 'OK'. Then, it told me that some packages could not be installed. I ran dpkg in a terminal window, and this is what it looks like:
> sudo dpkg --configure -a
Setting up openjdk-6-jre-headless (6b18-1.8-4ubuntu3) ...
update-alternatives: error: alternative link /usr/bin/java is already managed by java~.
dpkg: error processing openjdk-6-jre-headless (--configure):
subprocess installed post-installation script returned error exit status 2
dpkg: dependency problems prevent configuration of openjdk-6-jre:
openjdk-6-jre depends on openjdk-6-jre-headless (>= 6b18-1.8-4ubuntu3); however:
Package openjdk-6-jre-headless is not configured yet.
dpkg: error processing openjdk-6-jre (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of icedtea-6-jre-cacao:
icedtea-6-jre-cacao depends on openjdk-6-jre-headless (= 6b18-1.8-4ubuntu3); however:
Package openjdk-6-jre-headless is not configured yet.
dpkg: error processing icedtea-6-jre-cacao (--configure):
dependency problems - leaving unconfigured
dpkg: dependency problems prevent configuration of icedtea6-plugin:
icedtea6-plugin depends on openjdk-6-jre (= 6b18-1.8-4ubuntu3); however:
Package openjdk-6-jre is not configured yet.
dpkg: error processing icedtea6-plugin (--configure):
dependency problems - leaving unconfigured
Errors were encountered while processing:
openjdk-6-jre-headless
openjdk-6-jre
icedtea-6-jre-cacao
icedtea6-plugin
At some point in the last week, my webcam on 10.10 64bit mysteriously stopped working. The OS no longer recognises it as being there. It's an internal cam on a Clevo laptop and before this it's always worked perfectly.
Is there a way I can force the OS to recognise it? Or find out what broke it and fix it?
Writing this from a 9.10 LiveCD, so I know that my hardware is working fine.My system is running 10.10 normally. Last night, the update manager popped up, as it frequently does, and said I had some packages that could be updated. So I let it update after which it said I needed to reboot. So I did, and now it doesn't recognize my network connection, and even the blinky lights on the port itself stay dark. don't know a lot about networking or stuff under the hood, but I can work a console and/or text editor if someone can tell me where to look and what to type.My hardware is (from "lspci | grep -i eth"):02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)The packages that have a modified date of last night are:
ubuntuone-client-gnome_1.4.6-0ubuntu2_amd64.deb
python-ubuntuone-client_1.4.6-0ubuntu2_all.deb
libsyncdaemon-1.0-1_1.4.6-0ubuntu2_amd64
[code]....
After a recient update to the freenx libraries KDE on Kubuntu 10.04 stopped working but other desktops like gnome kept running. The problem wasn't in the normal log files, but it was found in the .xsession-errors file in the user directory on the server. After the update NX is trying to start kde with the /usr/bin/startkde4 command which doesn't exist. Instead make a link from /usr/bin/startkde to the non existent /usr/bin/startkde4 and it will work again. To do this use the command:
Code:
sudo ln -s /usr/bin/startkde /usr/bin/startkde4
I have a RPS (server with iscsi storage) that worked fine ! I yum updated it yesterday in order to upgrade it to 5.6.
After upgrading, the server can't reboot at all ! I can't find anything in logs
When i boot it via a kvm, the load screen says :
kernel panic - not syncinc : VFS : Unable to mounr root fs on unknown-block (2,0)
Pid: 1, comm: swapper Not tainted 2.6.34.6-xxxx-std-ipv6-32 #3
My kernel is on a netboot, it is 2.6.32, and i work on an ip failover.
The ipfailover continues to ping, but not the 'true' ip adresse
I assume it is a iscsi bug, but i don't know how to fix it. Or maybe it is something else.
screenshot here : [URL]
[Moderator edit: Insert link with img tags.]
I upgraded from Wheezy to Jessie yesterday and no longer have sound. I don't think anything is muted. I checked alsamixer and everything is on. MOC, VLC, speaker-test and aplay are all giving me errors. MOC refuses to load.
Code: Select allccc@de:~$ speaker-test
speaker-test 1.0.28
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
Playback open error: -2,No such file or directory
Code: Select allaplay /usr/share/sounds/alsa/Front_Center.wav
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
aplay: main:722: audio open error: No such file or directory
Code: Select allccc@de:~$ mocp
Running the server...
Trying JACK...
Trying ALSA...
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
Trying OSS...
[CODE]....
Should I have a normal alsa-base.conf file?
Latest kernel update on 10.04 desktop broke my bluetooth. The icon in the tray has now faded and pushing 'turn bluetooth on' does absolutely nothing. I'm on a Lenovo S10-2 laptop, everything was working perfectly before today's update.
View 6 Replies View RelatedI just updated my xubuntu 10.4 to the latest firmware and xorg server. Now my computer will only boot in low graphics mode and I can't log in, when I try it logs back out again. I have an nvidia graphics card. My computer was working perfectly until the update.
View 5 Replies View RelatedI'm running Ubuntu 10.04 on an Apple iMac 27". After updating yesterday, I no longer have working graphics drivers or a working mouse. The graphics card in question is an ATI HD 5750, and mouse is an Apple bluetooth 'magic' mouse.So far I've managed to fix the mouse, but not the graphics.
At first I didn't have any display at all, but I was able to ssh into the machine and get part way through the proprietry graphics driver installation. The installation failed, but at least I have something displaying on the screen now.I have tried the fix in this thread:[URL]The installation of this completes, however the graphics driver is not working. If I go to Administration > Hardware Drivers, then Ubuntu tells me the ATI driver is in use, but it's clearly not (takes 3 seconds to move a window).I've tried booting into the .24 kernel instead of the .25, but that's even worse since not the mouse doesn't work in .24 (it used to work fine)
I installed a whole mess of updates yesterday, and when I booted into Ubuntu today, my desktop looked off. I could only use the upper 80% of my display, while Docky had decided to completely take over the bottom portion. Killing Docky brought my display back to full size. However, any scrolling or window movement was very jerky. I double checked my appearance preferences, only to find out that I had been 'downgraded' from 'normal' to 'none'. I attempted to go back to my original settings. First, I was told that the Appearance Manager was searching for available drivers. After flashing through all of my open windows, I was told 'Desktop effects could not be enabled'. A bit of searching discovered that people have had problems with compiz in the past. I downloaded compiz-check, and ran it, only to be shown the following:
Quote:
Gathering information about your system...
Distribution: Ubuntu 10.04
Desktop environment: GNOME
Graphics chip: ATI Technologies Inc Radeon HD 2400 XT
Driver in use: fglrx
Rendering method: None
Checking if it's possible to run Compiz on your system... [SKIP]
Checking for hardware/setup problems... [SKIP]
At least one check had to be skipped: Error: No rendering method in use (AIGLX, Xgl or Nvidia)
So, something in my updates broke my graphics rendering. Unfortunately, I don't know how to force Ubuntu to tell me what was updated yesterday. If I could do so, is there a way to revert to the previous version, so I could run the updates one at a time until I figured out what went wrong?
I managed to get my Linksys AE1000 USB wireless adapter to work on Unbuntu 10.04 LTS.but recently I updated the kernel to 2.6.32-26 and when i rebooted I logged on to see my wireless connection was not working.even worse, I can't fn the links i had that showed me how to install it in the first place, its about the fact that the new kernel uses a different usb setup(probably incorrect, let me know it its incorrect). its an issue that the hacked driver isnt compatible with the new kernel release, how can i revert to the older version that it did work on? i'm using a RALinkTech driver [URL]
View 3 Replies View RelatedRE: Ubuntu Desktop 10.10 64bit Updates from 2-3 days ago.
Since then, Firefox starts and runs fine the first time. Close it down and later try to restart, error says that Firefox is already using that profile and will need to quit it before proceeding.
System Monitor then shows that firefox and firefox-bin are still loaded (although nothing in the gnome app tray at bottom of screen). Jill those 2 processes and Firefox loads normally.
Should I wait this out and see if later updates cure this? Reinstall Firefox? Submit a report to launchpad?
install Ubuntu inside Windows in the first place, thinking that would be the easiest way to get him into Ubuntu. Now, I can't figure out how to repair his grub loader without killing his Windows XP installation.
I'm a Windows guy (have to be, I'm a gamer), so my knowledge of Ubuntu is limited to whatever I can do in the GUI. The command line is beyond me at the moment ('cause it ain't DOS). More so because I have an identical installation to his system (I built both), and I'm wondering if this is about to happen to me too.
I ran a yum update a couple days ago, and it completed without error. Today I tried logging into Wordpress, and was unable to do so. I get a 403 error. Further investigation shows that I can no longer run any php scripts for Wordpress or Gallery. A look through yum log shows the following packages were installed:
Dec 13 11:22:52 Updated: mysql-libs.i386 5.0.88-1.fc10
Dec 13 11:23:57 Updated: qt-mysql.i386 1:4.5.3-9.fc10
Dec 13 11:37:40 Updated: mysql.i386 5.0.88-1.fc10
Dec 13 11:37:47 Updated: mysql-server.i386 5.0.88-1.fc10
There were no updates to apache, php, or SElinux, so I am at a loss to explain why apache is no longer able to run php scripts.
