Update to Ubutu 11.4 is it? The log in screen says 'module is unknow' when I try to log in. Windows 7 on the first partition has gone down the tubes too. Doing this on Lynx
View 3 Replies
I upgraded from Carmic to Lucid beta 2, but after rebooting when I tried to log on I got message "module is unknown". The only way to get to the system is to boot to recovery and choose "Drop to root shell prompt".
View 2 Replies View RelatedI've just upgraded to Natty and lost ability to login through the Gnome login screen - "Module is unknown" message appears after I enter the correct password and hit "Enter".
I'm still able to switch to a text console and login there, both as root and as a restricted user.
Here is an excerpt from my /var/log/auth.log file code...
After installing ncl 2 sp2, I restarted my computer. Now when I try to login I am getting the following error:Module is unknown. I am running openSuse 11.2 64-bit.
View 2 Replies View RelatedTrying to setup my box as a router on Ubuntu 10.04. When trying to setup a NAT rule in iptables 1.4.4 like so:
Code:
sudo iptables --table NAT --append POSTROUTING -o eth0 -j MASQUERADE
I keep getting:
Code:
Can't initialize iptables table 'NAT': Table does not exist (do you need to insmod?)
Looking at lsmod, it doesn't look like I have anything NAT related loaded ( I just have iptable_filter, ip_tables, and x_table ). Doing a locate nat, I find a module that looks like it should work. I'm running 10.04.1 LTS - Kernel is 2.6.32-25-generic #45-Ubuntu SMP and it is pretty much stock - haven't done anything fancy... this module looks promising:
Code:
/lib/modules/2.6.32-25-generic/kernel/net/ipv4/netfilter/iptable_nat.ko
but loading it and I get:
Code:
-1 Unknown symbol in module
Using mrepo, i'm trying to pull down centos 5.6 updates from a mirror (say, mirrors.kernel.org or mirrors.usc.edu). i want to use rsync to do this so i can try to exclude packages i don't need on my servers (e.g. firefox, openoffice). when i try this, i get the error "@ERROR: Unknown module '5.6'".
The following rsync command is what mrepo uses when i run "mrepo -ugvvvv":
When i run that, i get the unknown module error.
But what i don't understand about that error is, sniffing out the rsync server's modules on the commandline shows me that module (and path?) should work. like so:
Anyone know what i'm doing wrong when trying to pull this mirror down via mrepo? (or even that long rsync command)
I am new to Linux, I have recently bought a mini laptop for my daughter and it has linux installed. After initial looking through the linux software, (which I love) she has somehow managed to put in a user name and password, but has no idea what it is.How do I login without this information.
View 14 Replies View RelatedI tried upgrading to 11.04 this morning and after rebooting grub left me at the grub rescue> prompt with the message 'error: unknown filesystem'. I've tried purging and reinstalling grub using a live-cd but no joy.
Let me know what additional information to provide. EDIT: Here is the output from the Boot Info Script
[Code]...
I like to start a web site with login page similar to Facebook, Skype or QQ. Is there a pool of php programs that I can download, then change it for my own purpose?Any body doing this? I would start one if none more knowledgable to do it. Do not think XOOPs etc will fit my needs considering later development of my site idea.
View 1 Replies View RelatedFailed login attempts are logged to syslog with the user id or login id set to UNKNOWN_USER or UNSET.Anybody know if this is configurable. I would rather it just pass the actual id that the user used. Doesn't matter if it exist or not, just want to know if someone is guessing at user names and what those user names are
View 1 Replies View RelatedI'm unable to login to my Kubuntu Lucid. The login screen takes my password, blanks, then returns me to the login screen. I'm getting some graphics errors when running from recovery mode as well as the no space left on device error when attempting to start x from the terminal. Here are some outputs: When starting from recovery mode, selecting failsafeX from the Recovery Menu:
[Code]...
I've come to the conclusion that my root partition is full, but I'm not sure how to clear space, or how much to clear once I work out how to do it. I removed a few packages with apt, but it doesn't seem to have any effect. df -h shows that root is 100% full, yet it has 3GB free. I've grown comfortable with Ubuntu in the couple years I've been using it, yet this level of problem-solving is a bit nerve-wracking to me. I've been considering reinstalling (this machine is running Lucid upgraded from Karmic and Jaunty and has a few oddities), but I hate the idea of being forced to reinstall because I can't overcome this problem. If you need any other information or outputs from terminal commands, I'm happy to provide it.
i compile from broadcom wlan driver,when i use default F15 kernel (clean install F15)
Code:
$ uname -r
2.6.38.6-26.rc1.fc15.i686.PAE
[code]...
My goal is this: Allow a user to connect to a server via SSH with any login name or password without checking to see if that account exists on that server. Their account would be captured by a universal account say, 'generic_user', and then they would be directed to one of my python scripts with the username and password they supplied for initial login. At this point my script would capture their SSHD process ID and allow/deny their existence based upon a MySQL/Subscription check.
The part I'm having trouble with is with PAM and allowing the user to login with any credentials and be successfully authenticated under the generic account. Beyond that, everything is great.
Since I upgraded Jaunty from 2.6.28-13 to 2.6.30, I have to modprobe b44 by hand every time I boot the latter. I used the .debs in http://kernel.ubuntu.com/~kernel-pa/mainline/.I know I could just add it to /etc/modules or some .rc, but it loads without that in .28 and I really want to understand what changed (something else in /etc?) .
Code:
$ lshw -C network
...
[code]...
I have a 58 mg PDF that needs to be sent to a person with Windows. I do not know what special software they have. I only know that I nust send them the file in a way that they can use it. I tried yousendit.com and it tells me I need to install their "yousendit express package". But apperantly it will not run on Linux.
View 9 Replies View RelatedSo I made the upgrade to slackware64-current and all of a sudden after my next reboot, startx failed, and x refused to start the output was the following:
Code:
Release Date: 2010-02-16
X Protocol Version 11, Revision 0
Build Operating System: Slackware 13.1 Slackware Linux Project
Current Operating System: Linux hd830 2.6.33 #3 SMP Sat Feb 27 19:42:32 CST 2010 x86_64
Kernel command line: BOOT_IMAGE=Linux ro root=803 vt.default_utf8=0
Build Date: 23 February 2010 12:09:32PM
Current version of pixman: 0.16.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 6 19:21:18 2010
(==) Using default built-in configuration (30 lines)
(EE) Failed to load module "fbdev" (module does not exist, 0)
WARNING: Error inserting button (/lib/modules/2.6.33/kernel/drivers/acpi/button.ko): Invalid module format
WARNING: Error inserting i2c_algo_bit (/lib/modules/2.6.33/kernel/drivers/i2c/algos/i2c-algo-bit.ko): Invalid module format
WARNING: Error inserting agpgart (/lib/modules/2.6.33/kernel/drivers/char/agp/agpgart.ko): Invalid module format
WARNING: Error inserting drm (/lib/modules/2.6.33/kernel/drivers/gpu/drm/drm.ko): Invalid module format
WARNING: Error inserting drm_kms_helper (/lib/modules/2.6.33/kernel/drivers/gpu/drm/drm_kms_helper.ko): Invalid module format
FATAL: Error inserting i915 (/lib/modules/2.6.33/kernel/drivers/gpu/drm/i915/i915.ko): Invalid module format
(EE) intel(0): No kernel modesetting driver detected.
(EE) Screen(s) found, but none have a usable configuration.
Fatal server error:
no screens found
Please consult the The X.Org Foundation support. Please also check the log file at "/var/log/Xorg.0.log" for additional information. So then after some googling I got the suggestion to downgrade udev-151 to udev-141, but that yeilded no results. So I did some more googling and a bunch of people who had the same problem said that downgrading module-init-tools worked, so I downgraded from module-init-tools 3.11 something to 3.6 and now, not only does my X no longer work, but no modules are being loaded I believe, for example I saw in my startup that fuse was not being loaded, ndiswrapper which I had installed was not loaded.
I am trying to install ubuntu 10.04 lts on three of my schools old computers, they are all old Celeron computers, all basically exactly the same, it installed flawlessly on the first one but on the second after restarting after fresh instillation it boots to an error saying "unknown filesystem, grub rescue>" I've reinstalled 3 times, I've looked for others with the same problem but they are all related to dual booting with windows, I wiped windows, there is mow windows involved
View 1 Replies View RelatedOur Sled 10.1 server is running as a VM on VSpher 4. After a power outage we can not log into the server we get the Error in Module message. I can however disable the nic card for the server in the vm console and the system logs in with no problem.
View 2 Replies View RelatedI got notebook HP Pavilion 15-p171nr. Have installed Debian Wheezy. There was some problems, for example with screen brightness (backlight) and it was solved here: [URL] .....
The problem was solved with upgrading kernel 3.2.0 to 3.16.0 from backports... but... with these steps i lost my wi-fi wl module...
It was downloaded somewhere, compiled and worked well until kernel upgrade... For the current moment i can not compile it.
My hardware:
Code: Select all08:00.0 Network controller: Broadcom Corporation BCM43142 802.11b/g/n (rev 01)
Within last steps official wiki recommends (my device is in the supported list): [URL] .... but I got problems with compilation... here they are:
I have installed correct linux-headers:
Code: Select allroot@hpnote:/home/yaroslav/Загрузки# apt-get install -t wheezy-backports linux-headers-amd64
Reading package lists... Done
Building dependency tree
Reading state information... Done
linux-headers-amd64 is already the newest version.
[Code] ....
Then I am trying to reconfigure already installed broadcom-sta-dkms package and here is what I got:
Code: Select allroot@hpnote:/home/yaroslav/Загрузки# dpkg-reconfigure broadcom-sta-dkms
------------------------------
Deleting module version: 5.100.82.112
completely from the DKMS tree.
------------------------------
Done.
Loading new broadcom-sta-5.100.82.112 DKMS files...
Building only for 3.16.0-0.bpo.4-amd64
[Code] ......
I've upgraded kernel 2.6.27.48-0.2-default to 2.6.27.54-0.1.1 on openSUSE 11.1. Before I tried to upgrade to 2.6.27.48-0.3-default where I encountered the same issue. After reboot it can not find the modules for 2.6.27.48-0.2-default which puzzled me to no end. Now I have found that the /boot which is on separate partition of ext2 type is not mounted. The mount command does not recognize ext2 and xfs anymore.
Clearly the initrd does not have the right modules. Since this is standard zypper up process I would expect this to work without issues since it has worked until the 2.6.27.48-0.2-default kernel without issues. Has something changed with the last 2 kernel versions that requires some extra actions from me and if so what do I have to do.
My windows xp partition crashed for an unknown reason the other day and i was wondering if i could fix it from my mint debian partition. my windows partition starts to boot but then just hits a black screen and freezes and when i go to run it in any safe mode it just lists a bunch of drivers and then stops there.
View 7 Replies View RelatedHere is my problem:
I need to enable the statistic module in iptables.
I had Fedora 13 32 bits, iptables-1.4.7-2 and kernel 2.6.18
But kernel 2.6.18 does not support statistic module.
So, I upgraded from Fedora 13 to Fedora 14.
Now I have Fedora release 14 (Laughlin) and Kernel 2.6.18
I did this to upgrade: url
Also, I did this too.
# yum update kernel
No Packages marked for Update
How can I ugrade to newer kernel?
I tried posting this before and I'm not sure what happened but I don't think it worked, so if it did please forgive the double post.am very very new to centOS and linux in general. I just want to setup a test web server that more closely mirrors our actual web server that is hosted by rackspace. I've installed centOS and tried to setup Apache, PHP and MySQL from a guide on the web using Yum. When I go to localhost in the web browser I'm able to see the default apache page. However when I create a php page it's just blank.When I look at the apache error logs I get this: PHP Warning: Unknown: failed to open stream: Permission denied in Unknown on line 0
I've been searching alot on the internet and I know the issue is permission related, but I don't know how to fix it. I've seen some forum posts that say you need to use the chmod 775 command on the /var/www/html folder.Currently when I do ls -l /var/www/html it returns
-rw------- 1 root root 19 May 5 13:16 index.php
-rw------- 1 root root 19 May 5 13:15 index.php~
I'm sure that this isn't correct but like I said I don't know much about how to set permissions or who the owner needs to be. I've done alot of searching and seen similar posts, but no one seems to explain it clearly.
I have a dual-boot with windows and linux. Sometimes if I reboot from windows into linux, I notice that when X is starting up before the login screen comes up it will flash a screenshot from Windows. Has anyone ever noticed this?
View 4 Replies View Relatederror: unknown filesystem grub rescue>
Background: My mother's HP laptop had Ubuntu and Vista on it, Ubuntu my brother's doing. He decided he wanted to take off Ubuntu yesterday (he had forgotten the password), and deleted the partition that it was contained within. The computer now boots to this error.
Inventory: We no longer have the install disk for Windows Vista, he cannot tell me what version he used of Ubuntu, what partition it was on, any of the specs for the machine, or generally any information about the system. All I am aware of is that error on the boot-up screen. I have nothing else to work with.
I would like to remove Grub, and Ubuntu, and leave Windows intact (the request of the owner of the computer), but I have no idea what commands I could use to get rid of either when I can't access Windows, or how to properly remove them if I did access Windows.
I'm trying to enable the rewrite module in apache, to enabled the module I followed the last entry in the fist page this thread:[URL]...When I restart the apache all works fine, so I supose it's enabled
Now I create .htaccess in my apache folder (/home/user/apache), and I write this:
Code:
RewriteEngine On
RewriteRule ^link([^/]*).html$ test.php?link=$1 [L]
And I try to execute this: ./.htaccess, I have this mistakes:
Code:
./.htaccess: 1: RewriteEngine: not found
./.htaccess: 2: Syntax error: "(" unexpected
What are I doing wrong?
Code:
nits@nits-desktop:/mnt/Storage/Tors/Incomp$ btdownloadcurses --check_hashes 1 filename.torrent
/usr/lib/python2.6/dist-packages/BitTorrent/Storage.py:4: DeprecationWarning: the sha module is deprecated; use the hashlib module instead from sha import sha
These errors occurred during execution:
[09:37:48] IOError - [Errno 5] Input/output error
Got this error when I tried hash checking, was downloading the file using rtorrent when there was a sudden powercut and my system shutdown abruptly, tried restarting the torrent and kept encountering problems while restarting.
I just did an upgrade from 9.10 to 10.04 and now I can't boot into Windows 7 on this dual boot desktop. I usually do a clean install but with a laptop and desktop a copy of Windows 7 and Ubuntu on each machine it's getting very tiring with 4 os's so opted for the upgrade this time.
During the installation there was a window that game up about upgrading grub and what devices to install it on. The help box was not very complete and seemed to say to click all the check boxes which included the main drive and it's partitions including windows. During the install somewhere it said something like grub could not be installed on one of the devices which I think was sda6 which is probably the Windows 7 partition.
So how would I get the option of booting into Windows 7 on startup as now I only get a blank black screen when I click on the Windows 7 option upon bootup? I hope I don't have to reinstall one or both os's again from scratch as this is becoming to much work to do on two systems every 6 months, especially with the amount of programs I have installed.
The day started as usual until I got the very bright idea to install Ubuntu. A new OS along side W7, that sounded great. I checked some guides on the Internet, it was all very straight forward. Install it and Grub will show you the OS:es when you boot up. I installed Ubuntu, rebooted. After the BIOS messages the screen goes blank and my screen on-button begins to blink, as if trying to find a signal, I press enter, it reboots instantly. After BIOS messages I get to a screen that says "GRUB error: uknown filesystem grub rescue>"
I've looked through everything here and nothing works. I've tried to fix the mbr-thingy using Windows Repair and even though it says "one partition was updated with new boot-thingy" when I reboot, I get into that very same grub rescue. I think my setup has something to do with it. I run RAID0 (2x360Gb hard drives), first having C: at 50Gb and then the rest as F: for programs and such. What I did was that I shrunk the F: part and then used that as partition for Ubuntu. Also please have a look at these screenshots, my partitiontables and such seems completely wacky to the raid: Where should the boot-loader go? I'm very, very new at this. I've had Ubuntu Netbook remix on my netbook for a time but still treat me as an utter beginner.
I am trying to install a Sunix 4018T dual parallel port card on a pc with Mandriva Linux 2010.1: Dealer told me that linux has driver for this card already so I inserted it and turned on my pc. Unfortunately when I try to install my Okidata ML320, cups it's not showing any parallel ports. I try to update all the system with last patches and packages :I tested the card on a pc with windows xp, installed my printer and it works perfectly.
View 3 Replies View Related
