Just did an update to 9.1 & now am unable to boot to ubuntu, windows7 still boots ok. Didnt pay much attention to the update but did notice there were a lot of cups files. Booting to ubuntu get something about using a tab & then getting a list of commands one can do. Tried boot got 'no kernel' tried exit & got a pc reboot which let me back to the tab msg.
View 2 Repliestoday when i updated my ubuntu 9.10 it was about 44mb update and update manager was not able to download 13mb of files i clicked continue anyway. after that i shut down my pc and when i restarted it my old black and ordinary GRUB was gone and there was one with Debian symbol and blue background and everything and when i selected any OS ( i have 3 os 1 on my 80GB hard disk which is ubuntu and other 2 are debian and windows XP which are on 20GB hard disk) and it said
invalid character '+' file not found.
so i am now running on live cd.
This morning my update manager came up so I clicked to update. About halfway through the update an error message popped up & said to restart my system. I restarted my system and now have a black screen with the following message:
mountall: symbol lookup error: mountall: undefined symbol: udev_monitor_filter_a
dd_match_subsystem_devtype
init: mountall main process (344) terminated with status 127
I read around earlier & tried to use a Ubuntu disk and reboot but I have the same error.
I'm using a Dell Inspiron computer, it's just over a year old. I keep up with all the updates but unfortunately cannot say for sure which updates were taking place because I just hit the update box.
every time i try to update my computer i get this message administrator@desktop:~$ sudo aptitude upgrade W: The "upgrade" command is deprecated; use "safe-upgrade" instead. Reading package lists.Done Building dependency tree Reading state information. Done Reading extended state information Initializing package states.. No packages will be installed, upgraded, or removed. 0 packages upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 0B of archives. After unpacking 0B will be used.
[Code]...
I have 10.04 installed on my daughters Laptop. After running an update manager session, the system asked for a restart. After restarting the Laptop won't boot up. Get a black screen scrolling with lots of hex addresses then 3 unable to mount messages ( mounting to /dev /sys /prod ) then a no init found message, followed by entering a busybox shell session which leaves me at initramfs: I'm a newbie at this linux shell stuff and don't want to make it any worse by scrabbling along blindly! System is a dell Inspiron 1501, Ubuntu is installed on a clean formatted single partition.
View 2 Replies View RelatedUbuntu 10.04 performed an automatic update today which required a reboot afterwards. The reboot took me into a shell "GNU GRUB version 1.98-1ubuntu6", rather than the usual grub boot menu.
View 2 Replies View RelatedThis morning, I booted into my administrator account and checked for updates. There were a number (bogofilter, for one) but also a update to the 2.6.32-24 kernel. I installed the updates and rebooted the system. When I rebooted, the thought occurred to me (from reading another thread) that one of the reasons my Zareason desktop boots slower than my laptop (55 seconds vs 35) was that I have an external floppy drive attached, and perhaps the delay was a difference in my system checking for a bootable floppy.
So I went into the BIOS when it was booting to check to see if the floppy was enabled (it wasn't). Then I selected "Exit without saving" and resumed booting. What happened next was instead of seeing the Ubuntu icon and the six dots, I see "Ubuntu 10.04" and four dots. Then I get on the black screen these errors (sorry for any mistyping, I wrote them down on a sheet of paper as I had no other computer available to troubleshoot):
udevadm trigger is not permitted while udev is unconfigured
udevadm settle is not permitted while udev is unconfigured
udevadm settle is not permitted while udev is unconfigured
udevadm settle is not permitted while udev is unconfigured
ALERT! /dev/disk/by-uiid/939af864-c1a8-41d7-9b24-91d25685b6 does not exist. Dropping to shell
Busybox v1.13.3 (Ubuntu 1:1.13:3-1ubuntu11 built-in shell (ash).
Enter 'help' for built-in commands
initramfs
Googling around once I got into work and had computer access, it seems that the problem is GRUB has lost track of what partition I should boot from? Here is a thread which might be relevant: [URL]. Before I left for work, I went into the BIOS again and looked at the CMOS settings--everything looked normal. I once again exited without saving anything. I was going to try selecting an earlier kernel from the GRUB menu on boot, but couldn't remember the key to press.
I found out later today, to enter GRUB 2 it's been changed to the shift key, and not the F2 key like it used to be. One poster on the aforementioned thread said his system would boot ok to the earlier kernel. The thread above has as its solution to either try to tell GRUB where your boot partition is and/or re-installing GRUB. I have /home on a separate partition, so if I need to do a re-install I can do so without it being a major pain. Sda1 is the partition which has the OS.
I've been running ubuntu on multiple computers for about 8 months now, installed on one computer as it's only OS (XP ran too slowly), and as a side OS for two others, one running XP and one running 7.The problem is, Ubuntu recently stopped booting on my Windows 7 computer. The option shows at start-up, but when I select it, the computer restarts back to the boot menu. I had recently installed an update from Update Manager that required a Restart, so when I restarted it to finish installing I left it to have dinner and it restarted into windows.About a day later, I wanted to boot ubuntu again, but my computer simply restarted, and has been doing this since (it's been about 3 days). I'm not sure if this has anything to do with it, but the last thing I installed before the update was a 1st person shooter game, I can't remember the name, but the icon was a "ka" symbol in katakana.
View 3 Replies View RelatedI have installed kubuntu 9.10 inside windows Xp and I installed ubuntu-desktop to get both gnome and kde .I upgraded to 10.4 from gnome and I updated it.no problem. Then I updated the kubuntu and restarted the system, I am unable to boot ubuntu or kubuntu but still i am able to boot windows Xp.
View 8 Replies View RelatedI'm a linux newbie so be gentle please. I'm on Lucid Lynx. Last night, the update manager installed updates to the linux kernel header. I'm not exactly sure what that means but it was one of the more important updates as it required a reboot.
This morning, my machine would not boot. After getting past the loading screen, my laptop hangs on a black screen. It was working flawlessly before yesterday. I can boot into recovery mode which appears identical to the regular mode, which works fine and is what I've been using. Also, I used a custom bootscreen, but it seems to have reverted to the default one that comes with the Lucid Lynx install.
I am new to linux but have install fedora 14 twice on my computer now and about to go for three. The first time I installed it, ran the updates using yum update, downloaded and installed wireless driver b43 then tried to change boot order to boot to win 7 first and thought I messed it up when I did that. It took over 20 minutes just to boot up and log in and about 10 minutes just to open a terminal window. So re-installed it had a friend who is very good with fedora change the boot order, then did the yum updates and wireless driver install again today. Now when I reboot my computer it no longer automatically boots to windows, and does not even give me the option to boot to fedora.
I believe it's the grub menu but the boot menu that I used to get if i wanted to change the boot to fedora is now a different color (white & black) and doesn't list the option to boot to fedora. Currently I do not have the DVD I used to install and was hoping there was a way to fix it without re-installing it. The boot menu does give me the options of hitting 'e' to edit something or 'a' to edit the kernel arguments, and I have no idea what either of them are. But the 'a' does not do anything, 'e' brings me to another menu option with chainloader and rvnotify or something similar. And there are more buttons to edit stuff and 'b' to boot from the choices but they both boot to win 7 not fedora.
after initating the update and i enter my pass word, update stops and an error box comes up stating that it is unable to update because there is more than one synaptic manager running, i have restarted and get the same results, and to my knowledge there is nothing else running in the background.
View 3 Replies View RelatedAfter running update last night from 2.6.35.9-64 to 2.6.35.10-68 my laptop fails to start. Boot process goes most of the way to startup and then hangs just before login screen. Not sure what else to give as far as info.
View 12 Replies View RelatedI had a Centos 5.5 system working great...and then due to crazy curiosity, installed the kernel update. Did this through the graphical interface, uncheck all update other than kernel. It downloaded, installed fine..After reboot now all I get is GRUB_ and then nothing else! I waited 3-4 minutes and had to shut down system. Have been googling around but thought I will post it here as well..When I boot with Win7 and use Ext2fsd to check, the boot folder is empty. Not sure if this is because ext2fsd does not read boot folder or it got wiped out by the yum upgrade process.
View 9 Replies View RelatedI have recently run an update and now we are unable to boot the newer kernel. We get stuck as below;
Memory for crash kernel (0x0 to 0x0) notwithin permissible range
Red Hat nash version 5.1.19.6 starting
Unable to access resume device (/dev/VolGroup00/LogVol06)
[Code]...
The kernel version we were at was 2.6.18-194.el5 and the update move us to 2.6.18-194.17.1.el5. I've done some googleing but I'm unable to work out exactly what I need to do. I'm guessing the new kernal is missing a module?
I am unable to boot my Fedora 14 after last nights kernel update. When I start the boot up and hit F2 the system fails after outputting the line : Starting vservers of type 'default'. At some point the console displays an error message :
serial8250 : Too much work for irq17
How do I restore my previous version? I know some people have suggested in the past - just modify the grub.conf but how? When I boot off the cd I only get access to the liveuser disk. I need to have access to my own /boot/grub/grub.conf file.
After the latest update of Debian Wheezy, about three days ago, one of my machines won't boot anymore. The update was done by:
Code: Select all/usr/sbin/update-smart-drivedb
apt-get update
apt-get -y upgrade
apt-get -y autoremove
I get the error message: "Alert! /dev/disk/by-uuid/71c... does not exist. Dropping to a shell!"
The dir /dev/disk contains only "by-id" and "by-path".
I booted with the rescue system, dropped into a shell and recreated the ramdisk with
Code: Select alldpkg-reconfigure linux-image-3.2.0-4-amd64
dpkg-reconfigure grub-pc
But without success. On another machine the update went flawlessly.
I've installed opensuse 11.3 on my computer (well actually Ive done it twice, once with full DVD image and once with network install). Everything was OK until Ive made update (yast/software/online update <-- BTW kupdate applet isn't working, just update bar appear and stuck on 0%). i haven't installed any additional packages, only the defaults (KDE desktop). after update only fail safe option is working (booting normally and looks like normal desktop, no visual differences between normal and fail safe booting, if there should been any). When I've tried to find solution for this problem, very ofter answers were -> graphic drivers problem (im using ati hd 4670 AGP <-- yea, AGP . well when i start normal boot green screen with lizard logo appear, then screen goes black for a second or two, then the green screen come again, and after another few second screen goes black permanently with working hdd for 30-40 second (hdd led blinking) BTW i have windows7 pro (booting fine) on this machine too, it was installed as first system on hd0,0. opensuse was installed on stand alone PATA disk (secondary EIDE master, ODD on slave). how to gather info which u all need to get this problem more detailed. PS> sorry for my English, its not my native language.
View 7 Replies View RelatedI tried to update my ubuntu from 8.04 to 10.04. Because I couldn't find the update in the update manager I started the update with the following:
<Alt> <F2>
update-manager --devel-release
After checking for packages to update I first updated all the programms listed in the update manager. After this I started the update of the OS. After some checks the download of the new files started. It took appr. 2 hours. After this I got he message about some applications, which are no longer supported. So far no problems. Than I started the update of the system. After some further preparartions the update stopps with the following error message:
Die Aktualisierungen konnten nicht installiert werden
Fehler beim Anwenden
'E:Couldn't configure pre-depend jre for openoffice.org-writer2latex, probably a dependency cyle.'
Urspr�nglicher Systemzustand wird wiederhergestellt
I tried a restart of the update as well as a rebboot of the system and restart of the update. Both failed with the same error.
My system:
AMD64 (ubuntu 32 bit version)
Grub with 'Ubuntu' and Windows XP
For me the only way to get Ubuntu 10.04 running seems to install it from CD/DVD.
I have Ubuntu 10.04 LTS and Windows XP installed on my laptop. Usually when booting, I get the GRUB 2 menu and I can boot into either Ubuntu or XP.I was playing around with EasyBCD, then after trying to remove it I was unable to boot into Windows, I used a Windows 2000 CD recovery console to fix the MBR (using: fixboot and fixmbr).Now Windows starts up when I power on, but I don't get the grub menu anymore with an Ubuntu option. If I boot from the Ubuntu Live CD and try to mount my Ubuntu partition (/dev/sda5) I get this error:
mount: wrong fs type, bad option, bad superblock on /dev/sda5,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
[code]....
After installing karmic with Grub2 I am unable to boot into Archlinux partition. Grub2 has removed the last line of the Archlinux boot stanza! It used to read:-
[Code]....
Following the Grub2 tutorials I have tried editing /etc/grub.d/40_custom as follows:-
[Code]....
But no luck. Only way into Archlinux is to get into the edit shell and manually add the missing line and remove other stuff not needed. I have spent hours trying to resolve this issue and I am fairly p----d off
I've been having problems with the Update Manager ever since it tried to install an update for firefox a few days ago. I'm on Hardy, and I tried to completely remove the firefox package using Synaptic, and re-installing it, and I always get the same error. Maybe it might have something to do with ubuntuzilla? I know I used that a while back to install Firefox 3.5/3.6, since the only one I was getting from the package manager was 3.0. Anyway, here is the error:
E: /var/cache/apt/archives/firefox_3.6.3+nobinonly-0ubuntu1~mfs~hardy2_i386.deb: trying to overwrite `/usr/bin/firefox', which is also in package firefox-mozilla-build
I can't make heads or tails of this
I have virtualbox installed under ubuntu 8.04 x64. The kernel got updated and since then I have to reboot the computer and choose previous kernel to use virtualbox. The reason is that I can't get a hold of the virtualbox module for 2.6.24-28 generic. When the kernel has been updated in the past I would just go into synaptic and select it, but this time it doesn't show and I've waited a while now... Tried searching for the package to no avail.
View 2 Replies View RelatedMy gtk-gnutella 0.96.6 apparently has become "ancient" and I cannot seem to find anything relevant inline. Would there be one line terminal command to update it? (I've never build something from files only)
Code:
ibo@ibo-laptop:~$ sudo apt-get update gtk-gnutella
[sudo] password for ibo:
E: The update command takes no arguments
ibo@ibo-laptop:~$ sudo apt-get gtk-gnutella
E: Invalid operation gtk-gnutella
ibo@ibo-laptop:~$
i can't update my clamav antivirus to the new version
View 1 Replies View RelatedI can only use the Live CD to operate Ubuntu. After typing in the command sudo fdisk -l, I get the following?
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code]....
And when I boot without the Live CD, I get the following message in the GNU GRUB Version 1.98-1ubuntu7 window page.
Every time I try to do update or install a new software, it stops me, I tried to do update through the terminal but it didn't work, giving this error message : E: dpkg was interrupted, you must manually run 'sudo dpkg --configure -a' to correct the problem.
[Code]...
E:Type '--2010-06-27' is not known on line 1 in source list /etc/apt/sources.list.d/medibuntu.list, E:The list of sources could not be read.
The above message laughs at me. Anyway, looked through the forums, couldn't find a problem similar to mine.
after alot of work with my system, I've gotten most of it working It's a Toshiba C655-S5049 with a Atheros AR9285 Wireless card, so lots of fun getting that to work, anyway I'm trying to update my system, and it wont update, if I try update manager it won't do it because it's dealing with restricted drivers, and if I try in terminal I get E: Unable to locate package updateAnyway, any suggestions? I've been trying to work this out, and it's getting annoying. The key Drivers that I'm also looking for are, Video:Intel 4500M HD Integrated with Dynamic Sharing Audio:IntelAudio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03) Also, does anyone happen to know how well battlefield 2 will run in wine? it ran pretty good on windows, just wondering how it will do in ubuntu.
View 1 Replies View RelatedI can't seem to figure out what's going on here. Whenever I use synaptic to attempt to add/remove anything I receive the following error: (Reading database... 65%dpkg: unrecoverable fatal error, aborting: files list file for package 'dnsmasq-base' is missing final newline E: Sub-process /usr/bin/dpkg returned an error code (2) A package failed to install.
View 3 Replies View Related