Ubuntu :: Unable To Access Network Shares From Nautilus File Manager
Oct 15, 2010
I'm running 64 bit Lucid on a HTPC that is networked with a Windows 7 64 bit laptop. Up until this morning, sharing media between these two worked fine. When I attempted to connect through Rhythmbox to play music, the computer couldn't find the files. I attempted to access the network through Nautilus and it was unable to mount the location. So I tried the Create Launcher command and created a link of the network on the desktop. I was prompted to login and it worked perfectly This has happened once before and the only way to fix it was to reinstall Ubuntu.I would very much like to avoid that if possible as the system is setup perfectly.
I wouldn't bother with the issue if it didn't prevent me from adding my music files to Rhythmbox. I have run findsmb as well as smbtree. Smbtree returned nothing and findsmb had a dotted line with nothing underneath. Nothing has been removed. I did install security updates this morning, but since it has happened before, I am more inclined to thing it is a bug or conflict somewhere.
View 9 Replies
ADVERTISEMENT
Oct 26, 2010
I marked this solved when I discovered, after much reconfiguring, I had a faulty Netgear router - I just thought I'd save you reading all this to find the answer.I have 3 machines at home all running Lucid. All have Samba and shared folders but I can't access files on any machine from any other. This worked ok when they were running Karmic. I'm also unable to set up printing across the network from the two machines without local printers. The main machine has 2 printers connected via USB, the others are using WiFi. I'm not using firewalls on any machine.
Filesharing
On any machine I go to Places, Network and Nautilus opens at network:/// and shows me 'Windows Network' I open that and see the Workgroup folder which I open and see the folder is empty. (I did see the 3 machines before I completely removed Samba and re-installed a few minutes ago)
Printing
On one of the remote machines I go to Add Printer, Select Device, Network Printer, Windows Printer via Samba, Browse but I can't see the machine with the printers attached in the Workgroup. Another clue is that when I look at the printer properties, policies on the main machine all 3 boxes are ticked, Enabled, Accepting jobs (but it says Not published) and Shared.
View 9 Replies
View Related
Dec 19, 2009
I've got my other networking problem (mostly) solved, but now I'm having other issues.I was previously able to access the shared folders on a Windows machine on the network essentially by default. Now whenever I try to navigate to the shared folders graphically (either through Places->Network->Windows Network->(workgroup name here), or through a custom shortcut on the deskop), I get a message: "Failed to retrieve share list from server". I have no idea what I might have done config-wise (or install-program-wise) to screw it over, but something's definitely not working...it's been like this for a good many weeks, and I've just dealt with it, seeing as how I don't normally use that shared folder much anyway.
What's really ticking me off now, though, is that long before this started happening, I had set up a printer share with the same computer (using the graphical tool that comes with Ubuntu), and that worked excellently to start out. Recently, however, when I tried to print from the same printer (after the "Failed to retrieve share list" message started showing up), it would sit there and show "Pending"; it wouldn't print at all. Then I tried deleting the existing entry and creating a new one, figuring a new, fresh configuration would be created. However, when I tried to add a printer via the graphical tool (same as I had done before), it's telling me that "No printer was fount at [that] address".
View 4 Replies
View Related
Jan 18, 2011
I am completely new to linux an have read the replies to similar questions but am unsure of how to access the directory mentioned ~/.gconf/system/networking .I also do not have a system recovery disc or flash drive
View 7 Replies
View Related
Jun 12, 2009
I've been running a Samba server under RedHat 8 for five years without a hiccup. I want to cut over to a F10 box but cannot get shares accessible. smbclient attempts fail over NT password error. SELinux is disabled. Server is visible on the network. Users require no password access to shared data.
smb.conf follows:
# Samba config file created using SWAT
# from UNKNOWN (>)
# Date: 2009/06/12 14:15:15
[code]....
View 1 Replies
View Related
Dec 11, 2008
I run opensuse 11 at work. I'm trying to see the list of shares on a "server" that is running windows server 2000. If I try smb://server, it doesn't show any shares, but I can browse directly to it such as smb://server/share1. If I use smbclient, it returns the list of shares correctly. I guess I just don't understand why smbclient shows the list of shared folders, but nautilus cannot.
View 3 Replies
View Related
Jan 13, 2011
At, or around, the time of upgrading from Lucid to Maverick, shares on some of my nfs servers have become inaccessible:
Code:
peter@Desktop:~$ ls /net/10.2.1.21/
opt
peter@Desktop:~$ ls /net/10.2.1.21/opt/
sybhttpd
[Code]....
The share is hosted on a PopcornHour Network Media Tank, running a Linux system. With Lucid, I was able to access the share without any problems, both in Nautilus and from terminal. I can still access the share from other nfs clients - it's just ubuntu/Maverick which exhibits this problem. I have tried reverting to older firmware on the PopcornHour but that doesn't make any improvement.
Was there some significant change in nfs with the Maverick release, or have I misconfigured something?
View 4 Replies
View Related
Dec 6, 2010
I have Ubuntu 10.04 set up on my acer revo, this is connected to a wireless router via ethernet. Next door, is a pc that is running windows XP, and an original XBOX running XBMC. Those are connected via a crossover cable. The XP machine connects to the web wirelessly using my router, and the connections are bridged for XBMC's TV show scrappers. The idea is we use the revo for downloading as it consumes a relatively small amount of electricity. I have two external 1tb drives connected to the revo with Tv shows and movies, I would set up a network share so the XP machine could see them, and the xbox would be able to share the videos present.
I have installed samba, right clicked the drives in question and clicked the sharing options. I have ticked to allow guest access, and write access. This worked! I the shared the /home directory on the revos harddrive using exactly the same method. This worked. However I was no longer able to access the External drives. The UID has remained the same. I then tried unsharing /home, still no joy. Tried resharing /home Home now works, but still the externals don't.
View 9 Replies
View Related
Jul 24, 2011
First off a little history of me lol. I'm not completely a Linux noobie, but I'm not the most advanced user either. With that said I have a few interesting problems with Samba.First off I can see the NetBios name under Windows Networking (Windows 7), however everytime I try to connect to it I get an Access Denied and/or "Incorrect Password/Username" error. I have gone into secpol.msc and changed the values that other posts have suggested. Both the server and the workstation are located under the same group, and I have used the smbpasswd -a <username>. The server is not configured to be a Primary Domain Controller so.. I'm lost. Infact my brain hurts from 3 days of this. I have posted my SMB.CONF file to see if that helps. Hum.. Maybe I'm just trying to access a file share that isn't there..
View 13 Replies
View Related
Nov 22, 2010
I am trying to access my win7 networks shares with pcmanfm. (I have done sudo apt-get install gvfs-backends). I dont have any pw on my win7 and i dont want one. So every time i try to connect, pcman ask me for pw. How to configure pcman to dont ask me for pw? I have tried linux mint live usb and ubuntu live usb with same result.
View 5 Replies
View Related
May 27, 2010
I just updated from 9.04 to 9.10 (it's a long story, and I still can't go beyond 2.30).The update got rid of WICD, which is what I used and installed network-manager. Network-manager was not working at all, so I uninstalled it again and installed WICD. I could connect perfectly and had no problems.However, now the computer hangs during boot, saying that init can't start network-manager. I assume that something went wrong during the uninstalling process, since it wasn't updated.
This is the message: init: Failed to spawn network-manager main process: unable to execute: No such file or directory.
So how do I update it or manually change it so it stops requesting network-manager?
View 3 Replies
View Related
Jan 6, 2011
I am traveling to the UK next week, and whilst I am there, I need to be able to access my SAMBA shares hosted on my HOMESERVER, via my laptop in england.
I have tried Hamachi before, which works fine on windows, but the linux version is awful, and hardly works. So I need an alternative. I did a bit of googling, but I don't know what "bridged" means when I found a OpenVPN tutorial
I was wondering if anyone could give me some information as to what I'll need, and what I'll need to do on both my homeserver and my laptop?
View 4 Replies
View Related
Dec 21, 2010
I have three computers on the network, one is using Windows Vista, one is in an office room using Ubuntu 10.10, and one is in the living room using Ubuntu 10.10. All three computers have folders shared, and were all three reading files just fine with one another for a couple of months. To share the folders, I just right clicked on them, selected sharing options, and checked the boxes for "share this folder" and "guest access". Both Ubuntu computers have samba installed and configured so the Vista computer can see their shares. Tonight, the Ubuntu computer in the living room stopped being able to see the other computers under places -> network. The other Ubuntu computer and Vista computer can still see each other's shares just fine.
I also created a test share folder with a file in it on the living room Ubuntu computer, and it can be seen by the other Ubuntu computer. I can ping the computer in the living room, and the computer in the living room can ping the other two computers. I set a static IP address on the Ubuntu computer in the living room to rule out an IP address conflict. Under network, if I go to "go -> location..." I'm not quite sure what to type in there to find other computers. Under places -> network, the only thing that comes up on the Ubuntu computer in the living room is it's own shares. I tried using the search feature, but was unable to come up with anything resembling my particular problem within a reasonable amount of time.
View 1 Replies
View Related
Feb 3, 2010
i can use it to auto arrange desktop files automaticly like in windows how can i do this with this software? and by the way what are the diffrences between ubuntu 8.10 9.10 and 10.04 dvd version?
View 1 Replies
View Related
Dec 13, 2010
I have, in fact, stated my problem correctly. I want to make Nautilus as the default File Manager in KDE. I use GNOME on other computers, and don't like the feel of the KDE file manager on my PC. I looked online but most "solutions" are for the other way round and in either case, didn't work for me.
I tried changing the 'inode/directory' file association to Nautilus but it didn't change anything. What can I do ? (I have GNOME as a DE here too .. But I would like to know how to change the association in KDE as well)
View 4 Replies
View Related
Mar 3, 2011
I have a home network and I use Samba to share files. Now when I am on the network, I can see the shares just fine, but if I use a crossover cable, I cannot see or access the folders or files.My goal is to use a crossover cable from one computer with clonezilla to my server in order to use Samba to make an image of my workstation and save the image on my server.But everytime I try to connect with clonezilla I get a persmissions error and the share will not mount. I tried going to the shell and mounting as root, but that did not work either.
I have another server which is only a console and it works though I am unsure why. The share though is a mounted usb drive while on the one that does not work, it is on the internal hard drive.I was wondering if anyone had any ideas or anything I could try to narrow down the problem. Oh, I can access the share using ssh, but not samba. One other thing, the shares are set to allow read/write access to everyone so I don't see why I can not access it.
View 3 Replies
View Related
Sep 2, 2010
I have a few ubuntu servers which have samba shares on the network and for the most part have had little trouble with them. Recently we purchased a few iMac's for one of our deptartments and, while we're able to access the shares, all the files on them are read-only and we are unable to delete/modify files using the iMacs. This is not an issue with any of our windows machines (W2K, WinXP, Vista).
View 2 Replies
View Related
May 7, 2010
I need some restoring my Nautilus File Manager back to its original state. I tried installing Elementary Nautilus but for some reason it was not working for me, so I uninstalled it but have been having an issue with Nautilus looking like its former self. Now Nautilus doesn't display the "tree" on the left, there are no back/forward icons, and generally looking strange.Here's a picture to showcase my issue:
[URL]
I would love to use Elementary Nautilus but can not get it as my default file manager. Since I can't do that I just want Nautilus (the one that comes shipped with Ubuntu) to look and act like it's supposed to.
View 2 Replies
View Related
Oct 3, 2010
I installed the elementary theme and played with it. Unfortunately, I accidentally remove the icons in the file manager. Refer to attached image.How will I display the icons, menus and address bar again?
View 2 Replies
View Related
Apr 16, 2011
I would like to have Nautilus not display the *.pyc files, is there a way to obtain this result?
View 4 Replies
View Related
May 18, 2011
I would like to use DropBox, but I really don't want Nautilus on my system.I downloaded the source to compile, thinking it would allow me to use a different file browser, but unfortunately it seems they made it dependent on Nautilus.Is there a way to compile it using a different file browser (Thunar in this case)? And if not, is there an alternative to DropBox out there that works on multiple platforms?
View 9 Replies
View Related
Jan 2, 2010
I have a Thecus NAS with nfs support running. Now I switched from OpenSUSE 10 to 11.2 on the client side and aren't able to mount my nfs shares. With SuSe 10.0 I didn't have any problems.
The /etc/exports:
/raid/home_nas1 192.168.0.24/31(rw,no_root_squash,sync,anonuid=99,anongid=99,no_subtree_check)
/raid/soundandmore 192.168.0.24/31(rw,no_root_squash,sync,anonuid=99,anongid=99,no_subtree_check)
On the client side I'm able to see the shares:
showmount -e nas1
Export list for nas1:
/raid/home_nas1 192.168.0.24/31
/raid/soundandmore 192.168.0.24/31
The client address:
inet addr:192.168.0.27
I'm using nfs-3:
mount -t nfs nas1:/raid/soundandmore/mnt
mount.nfs: access denied by server while mounting nas1:/raid/soundandmore
View 9 Replies
View Related
Jul 13, 2011
i have 3 shares on my samba. i have users - user, manager and boss projects is RW to everyone reference is R to everyone RW to manager and boss Proposals is RW only to boss, no access to others However when boss logs in and creates a directory in projects share, the directory can only be renamed bu users and manager, and directory contents are read only for users and managers, even deletion / rename is denied. How can i make sure that when ever boss creates a directory in projects, it retains base folder permissions and is writable to user this is my samba file... i am using red hat 6.1 with samba 3.5.6 (i think)
[Code]....
View 1 Replies
View Related
Jul 28, 2010
I am working as a Linux administrator in a very small data centre with 5 servers with following routine tasks.
1. Managing SAMBA shares and giving user specific access for the shares.
2. Scheduling backup of some mount points with rsycn to store data in remote hard disk
3. User and group administration, with sudo access.
4. Creating and Managing Xen Virtual machines and giving access to other project teams.
5. Automating some tasks with Shell Scripting.
6. Managing FTP server for user uploads.
I have practiced a lot in my home laptop without RHEL training, Cleared RHCE and LPIC1. I want to do some advanced system admin tasks, but do not have option in my current data centre. With Above skills is it possible to get a job ?
View 9 Replies
View Related
Jun 3, 2010
With Ubuntu 9.10 and 10.0.4 I have seen that the nautilus filemanager is extremely slow with folders that contains many files or/and folders.I made sure that "Assistive Technologies" is diable. On the filemanager preference I set all preview to "Never", tried all possible views, but the filemanager remains extremely slow. It seems like it becomes even slower when the subfolders in the folder you are viewing new files are being created by for example a program. Possibly nautilus filemanager is updating continuously ?
I use to be using debian etch nautilus file manager. With the same directories, nautilus in debain etch was working much faster. But contrary to the one in Ubuntu 9.10 and 10.0.4 is is far less stable. It seems like the newer version is more stable but however extremely much slower. I was wondering if I am missing something. Or whether this is a bug. If it is a bug, then I am wondering when this is going to be solved in nautlius filemanager.
View 7 Replies
View Related
Oct 31, 2010
Last night I had to re-install Ubuntu. Previously, the header of the file manager had been configured up with the three buttons on the right for icon/list/compact view (see 1st image below), whilst since re-installing, they appear with the drop-down menu instead (as per the 2nd image). How do you change between these two formats? My preference is for the first of these.
View 2 Replies
View Related
Jan 28, 2011
Nautilus File Manager search in a directory seems to be corrupted. It's glued to a previous search and you cannot start a new one. Anybody know how to repair?Clicking the magnifying glass goes to this directory (it reads Search for ""under the Title Bar).
View 6 Replies
View Related
Nov 28, 2015
Backspace doesn't work with nautilus file manager, what to do?
If i press backspace, it doesn't redirect to the previous location.
View 3 Replies
View Related
Mar 4, 2010
Is there a way to edit an existing nautilus (fie manager) bookmark?
Invoke from Linux command line:
$ nautilus
Activate connection editor: File>Connect To Server...>
Complete entries in the pop up:
Service Type: [WebDAV (HTTP)]
Server: [localhost]
Port: [8001]
Folder [webdav]
[Code]....
View 1 Replies
View Related
Dec 5, 2008
Using Fedora 10. I want to try different file managers for a while but can't find how to specify the default. I can open each one via the apps menu but can't find the "set as default" option.
View 12 Replies
View Related
