I have Ubuntu 9.10 and when i plug in my usb drive it wont mount it automatically and is not shown in the nautilus browser also, but if i search in /dev its visible(its detected) and i can mount using mount /dev/sdc /mnt But if i do this i can only copy files from browser and for all other times i need to use terminal again
View 1 RepliesI have a netbook running Ubuntu Netbook Edition and I would like a USB flash drive to be automatically mounted whenever I plug it in. The drive is FAT formatted. It mounts when I plug it in but all files are only writable by my user, other users only have read access. I understand that I need to add a corresponding entry to the /etc/fstab file. I've added the following so far:/dev/sdb1 /mnt/USB_DRIVE vfat
Firstly, is that appropriate so far? I've created /mnt/USB_DRIVE as root. Next, I'm not sure what options I should be finishing the line with, especially to get all users to be able to write to the drive.
I suspect this is not new but I just can't find where it was treated. Maybe someone can give me a good lead.I just want to prevent certain users from accessing CD/DVD drives and all external drives. They should be able to mount their home directories and move around within the OS but they shouldn't be able to move data away from the PC. Any Clues?
View 2 Replies View Relatedupgraded from karmic through update managerANDnone of of my external drives cd drive or flash drives are picked upad to go back to karmic and will remain there for a whil
View 9 Replies View RelatedI recently had issues with the latest version of the Linux Kernels and I got that fixed but ever since that has happened none of my Drives will mount and they aren't even recognized.
View 1 Replies View RelatedI've been Ubuntu 8.10 along with Windows from abt 3-4 monthsFor automatically mounting of NTFS drives that I has which were created by WIndows, I uses NTFS Configuration tool Everything was working fine in both OS's.But how come of a sudden today I'm not able to open any drive that I have which were happening till now.Not only this,at least if we press F9 then we get sidebar,from where we could have opened the drive .even that is not happening.
View 4 Replies View RelatedIs there anyway to make so of my hard drives I have which are being used to share over a network automaticly mount themselves when my pc boots up?
View 2 Replies View RelatedI just recently found an iso for 6.06 and installed it on an old pc of mine that already had 8.04 and crunchbang on it. crunchbang is on an ext4 formatted partition.
When I setup 6.06, it asked me what i wanted to mount my drives as, so i told it to mount the ext4 system as hda1.
whenever 6.06 boots, it tries to mount hda1 but can't because it doesn't recognize ext4.
What I am asking is this: is there a deb or a package out there I can install to make 6.06 recognize ext4? if not, how can i make it so that 6.06 does not want to mount hda1?
I can get past the initial error message and into the desktop, so 6.06 does work.
It seems to be (we have experienced) that 10.10 can't handle having an older ext3 drive mounted to a folder on the 1010 ext4 drive. The files get "corrupted", but afterwards, putting the drive back into the original older 9.04 system, the files are perfectly fine again.
View 3 Replies View RelatedUpdate: Solution posted below. Distro: Kubuntu 10.04 AMD 64. My system automatically mounts USB devices when attached to the system. I have explicitly disabled this function in (KDE) System Settings --> Advanced --> Removable devices. It doesn't matter - as soon as a USB device is plugged in the system mounts it as root.
View 4 Replies View Relatedi reboot, windows drives are mounted with different filenames (eg:first time d: was /media/disk and e: was /media/disk-1 but after reboot they got interchanged - e: was mounted in /media/disk). I cannot afford this as several apps use files from these drives and their path keeps changing after every fresh boot.
View 1 Replies View Relatedis their any way to change the mounting location of your hard drives so when you click a certain hard drive in nautilus, it'll go to that location instead of the default one?
View 2 Replies View RelatedI have a few hard drives that I connect to my system with an usb to ide cord. some of the drives mount right away but some others don't below example.
Oct 24 11:10:04 linux-b21t kernel: usb 1-3: new high speed USB device using ehci_hcd and address 14
Oct 24 11:10:04 linux-b21t kernel: usb 1-3: configuration #1 chosen from 1 choice
Oct 24 11:10:04 linux-b21t kernel: scsi15 : SCSI emulation for USB Mass Storage devices
Oct 24 11:10:04 linux-b21t kernel: usb-storage: device found at 14
[Code]...
I am writing a c program in linux and in the program I am mounting 2 usb devices attached to 2 specific ports in the computer. (eg : I have to mount the usb attached to the left port in to /mnt/left and the right port to /mnt/right) and the attachment order of those devices may differ (eg: left port usb may or may not be attached before the right.) In this case what should i do?
View 1 Replies View RelatedI have installed suse linux on my desktop pc. I cant see the disk drives on which windows xp is load. How can I mount those drives so that I can see those drives in suse also. Also when I connect my usb drive, it is also not shown. I am new to linux. What are these commands to mount the other drives.
View 3 Replies View RelatedI know this is an easy task, especially using cPanel. However I want to do this without formatting the drive, since there is sensitive data already on the hard drives. So how would I mount a hard drive, but not format/lose any of the data already on it?I've looked and everything seems to lead me to believe that I'll lose data if I do it that way.
View 7 Replies View RelatedI am writing a c program in linux and in the program I am mounting 2 usb devices attached to 2 specific ports in the computer. (eg : I have to mount the usb attached to the left port in to /mnt/left and the right port to /mnt/right) and the attachment order of those devices may differ (eg: left port usb may or may not be attached before the right.) In this case what should i do?
View 4 Replies View RelatedI just started using openSUSE 11.1 with xfce and my problem is that I cannot mount my external USBs, I get the following message:
org.freedesktop.hal.storage.mount-removable auth_admin_keep_always <-- (action, result).
It seems hal does not give me permission to do this. Am I able to mount using the command line? If so, how?
I've created some encrypted partitions using Disk Utility, and would like them to be automatically mounted when Ubuntu starts up. Is there a guide to this anywhere?
I've gathered that it involves /etc/crypttab and possibly /etc/init.d/cryptdisks, but haven't had much success so far.
Ideally, some of the partitions would mount early in the boot process, while some of them can mount after I've logged in.
If I can't get this sorted, I really can't use Ubuntu so pleeease help. I'm a complete newbie, as in, about 2 hours using ubuntu so far. Generally things are going well. I am trying to create a link to my windows xp workgroup where all my data is stored (I was surprised that linux could even see it!) I mounted a volume on the desktop apparently... that worked fine until I rebooted and it had disappeared. it was fairly annoying that I had to go back into the network and re-mount the volume. How can I get it to stay put, even after rebooting? I have limited to zero knowledge of linux/ubuntu so you may need to break it down for me.I tried using 'Storage Device Manager' as someone suggested but emmm I didn't understand a word of it. In fact there weren't many words. Only acronyms
[URL] I don't understand it at all...
syslog, messages and kern.log are incredibly huge files that are taking up a lot of space on my hard drive. Is it safe to remove them and/or to reduce logging so it doesn't take such an enormous amount of hard disk memory? If so, how can I reduce the logging so it doesn't produce logs that are 10s of GB in size?Also, mounting a drive places it into the folder /media. Will it become problematic if the size of the mounted drive exceeds the amount of free space available on my Ubuntu partition?
View 4 Replies View RelatedI need to examine a hard drive that came from another system running Ubunut Server (not sure what version). I know the drive has LVM on it, so as far as I understand that means the drive will be treated as EXT4 for mounting. I can't boot from the actual disk, but I have used a IDE to USB connector to make a binary copy of the drive, which I've mounted as a loopback device. However, when I try to mount the loopback device properly, I get this:
root@~je:/# mount -o ro -t ext4 /dev/loop0 /mnt
mount: wrong fs type, bad option, bad superblock on /dev/loop0,
missing codepage or helper program, or other error
In some cases useful info is found in syslog - try
dmesg | tail or so
I tried using -t ext4dev too, but that just gives an unknown filesystem error. The file I've got mounting in /dev/loop0 is a .dd file, created by imaging the drive using dcfldd on the server drive while it was mounted (as /dev/sdb). System I'm working on is running Ubuntu 9.10. All I need is to be able to mount the server drive so I can traverse the file directories, there's a few things I need to check on it. If needed I can dispense with the whole loopback setup and just directly connect the server hard drive again using the IDE to USB cable, but I'd rather not do that; it's imperative that the drive doesn't get altered, or at least as little as possible.
I have a fresh installation of Fedora 11 and I am having a hard time figuring out how to automount my storage drives. Each time I login, I try to access my various storage drives and gnome makes me authenticate asroot before mounting it. FSTAB lists only logical volumes but not my storage drives. What can I do to make sure these automount when I login?
View 3 Replies View RelatedI know this problem was mentioned here before but because I could not find a straight forward solution anywhere I am reposting this here. So here goes.As of today, my Fedora 13 64-bit has ceased to auto-mount USB drives completely. I have made absolutely no changes to the system and I am completely baffled and frustrated by this sudden development. I desperately need this system to function properly as I use it for school and this really put a wrench in my works, especially since I have done nothing to cause this. I assume that one of the many recent updates that have been released must have done this, but I have absolutely no idea how to fix this. Why do Fedora developers release updates that cripple a perfectly functioning system is beyond me and crap like this really makes me consider switching back to Ubuntu.
View 9 Replies View RelatedOpenSuse 11.2 64bit When I select a hard drive in Dolphin file manager it asks for the root password. I would like to gain easier access to the drives. The Yast Partition Manager lists all of the drives and has a dialog box to change this i.e. user can mount the drive. Can we change this feature on the run, while the system is running ? The Fstab file is not listing all of the drives, so I cannot just edit the config here.
View 4 Replies View RelatedIs there a way that I can get Dolphin to mount partitions? When I try to, it gives me an error on the bottom of the window saying I don't have permission to. I also can't mount partitions in other programs like Amarok, because of the same issue.
Error Message:
An error occurred while accessing 'Windows 7', the system responded: org.freedesktop.Hal.Device.PermissionDeniedByPolicy: org.freeDesktop.hal.storage.mount-fixed auth_admin_keep_always <-- (action, result)
my opensuse is not auto mounting USB drives anymore. It was working a few weeks ago! I have an external 500GB HDD and also an 16GB Kingston USB flash disk, both are not being auto mounted.If i do lsusb i get
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 001 Device 006: ID 0930:6545 Toshiba Corp. Kingston DataTraveler 2.0 Stick (4GB) / PNY Attache 4GB Stick
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[code]....
I've been struggling with this one for a while - I have three SATA hard drives installed on my system:
/dev/sda - an 80 GB disk with three partitions, one NTFS for WinXP, one ext4 for Fedora 11 x86_64, and a boot partition
/dev/sdb - a 250 GB disk with one partition, ext4
/dev/sdc - a 250 GB disk with one partition, ntfs
I can mount any partition on /dev/sda without problems - everything works exactly as expected. Attempting to mount a partition from one of the other disks results in something like the following (this is for sdc1):
Code:
[User@machine ~]$ sudo mount -t ntfs /dev/sdc1 /mnt/shared
[sudo] password for User:
ntfs-3g: Failed to access volume '/dev/sdc1': No such file or directory
ntfs-3g 2009.11.14 integrated FUSE 27 - Third Generation NTFS Driver
XATTRS are on, POSIX ACLS are off
Copyright (C) 2005-2007 Yura Pakhuchiy
Copyright (C) 2006-2009 Szabolcs Szakacsits
Copyright (C) 2007-2009 Jean-Pierre Andre
Copyright (C) 2009 Erik Larsson
Usage: ntfs-3g [-o option[,...]] <device|image_file> <mount_point>
Options: ro (read-only mount), remove_hiberfile, uid=, gid=,
umask=, fmask=, dmask=, streams_interface=.
Please see the details in the manual (type: man ntfs-3g).
Example: ntfs-3g /dev/sda1 /mnt/windows
Ntfs-3g news, support and information: http://ntfs-3g.org
The /mnt/shared directory is created; the failed to access error is related to the disk.
Here is the output from fdisk:
Code:
[User@machine ~]$ sudo fdisk -l
Disk /dev/sdb: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0f970f96
Device Boot Start End Blocks Id System
/dev/sdb1 1 30401 244196001 8e Linux LVM
Disk /dev/sdc: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x1050104f
Device Boot Start End Blocks Id System
/dev/sdc1 1 30401 244196001 7 HPFS/NTFS
Disk /dev/sda: 80.0 GB, 80026361856 bytes
255 heads, 63 sectors/track, 9729 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x8e538e53
Device Boot Start End Blocks Id System
/dev/sda1 1 6375 51200000 7 HPFS/NTFS
/dev/sda2 * 6375 6400 204800 83 Linux
/dev/sda3 6400 9729 26743361 8e Linux LVM
Disk /dev/dm-0: 21.4 GB, 21428699136 bytes
255 heads, 63 sectors/track, 2605 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Disk /dev/dm-0 doesn't contain a valid partition table
Disk /dev/dm-1: 5955 MB, 5955911680 bytes
255 heads, 63 sectors/track, 724 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Disk /dev/dm-1 doesn't contain a valid partition table
Disk /dev/dm-2: 250.0 GB, 250059348992 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x0f970f96
Device Boot Start End Blocks Id System
/dev/dm-2p1 1 30401 244196001 8e Linux LVM
Disk /dev/dm-3: 250.0 GB, 250056705024 bytes
255 heads, 63 sectors/track, 30400 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x00000000
Disk /dev/dm-3 doesn't contain a valid partition table
And also from blkid (this does not match the output from above - but I don't know if this is actually related to the problem or how to fix it):
Code:
[User@machine ~]$ sudo blkid
/dev/sda1: UUID="506412E06412C91C" TYPE="ntfs"
/dev/sda2: UUID="811bf259-33d5-4db2-9851-e93b47dcbcc8" SEC_TYPE="ext2" TYPE="ext3"
/dev/sda3: UUID="U3AJLH-Lhm1-b0lf-HDX9-ZK1V-ezqU-sb0YGQ" TYPE="lvm2pv"
/dev/dm-0: UUID="f5733171-0753-4f53-834b-cc693ffb0aed" TYPE="ext4"
/dev/dm-1: TYPE="swap"
/dev/mapper/vg_machine-lv_root: UUID="f5733171-0753-4f53-834b-cc693ffb0aed" TYPE="ext4"
/dev/mapper/vg_machine-lv_swap: TYPE="swap"
Fairly new to Ubuntu (started with Karmic), now dualbooting Lucid and Windows 7. Lucid is automatically mounting my NTSC partitions, which is pretty convenient since I store all my media there, but I recently deleted one of the partitions and just extended the other one. Now Lucid is still trying to automatically mount the partition that no longer exists and giving me an error message every time I boot up. Not really a big deal, just a minor annoyance, but I'm wondering what I do to make it realize the partition is gone.
View 7 Replies View RelatedI want to mount partitions automatically after starting computer...currently i hav to click on the partitions and mount them.
View 9 Replies View Related