I am new to this and just got a SUN Netra 440MHz T1 105 with 512MB RAM, 2 19G SCSI drives and a IDE CDROM.I am having trouble loading Ubuntu 9.05 server iso via the CDROM. The CDROM driver does not get found and the installation aborts. The CDROM is a 24x toshiba XM-7002B.I can load the old Ubuntu server 7.10 but cannot update it. (would need some help to do that, too).
View 4 RepliesWhen installing FC 11 after a few questions about language I got:
"The Fedora disc was not found in any of your CDROM drives ...."
I read a couple of the threads on the problem and it seemed people were shooting in the dark for answers. Two issues mentioned were SCSI and DMA problems. If I go into the bios and disable the DMA or SCSI driver, and then I re-enable them after installing Fedora, will Fedora see the DMA or SCSI? Or will the fact that they were disables during installation keep Fedora from recognizing them later?
I downloaded and burned the Fedora-13-x86_64-dvd iso to install on my shiny new box (MSI NF980-G65 MB, AMD Phenom II x4 945 CPU, 8GB Corsair DDR3 memory, generic ATAPI DVD drive, 2 500GB SATA drives, 2 1.5TB SATA drives). I boot from the DVD and and take the default install/upgrade option on the menu. I've tried with the default boot options and with about a dozen different options, all give the the same thing.
Looking console 3, shows the following:
ERROR loader: removing ddmode.conf failed
ERROR loader: got to setupCdrom without a CD device
It can't find the CD/DVD drive that it booted from. The install on console 1 is prompting for a driver to load. Do I need to download a driver for a generic ATAPI/IDE CD/DVD drive?
Why is it that FC6 installs just fine from a USB CDROM in an external enclosure but FC12 boots from the CD asks to install or upgrade an existing system but then stops at no devices found and wants the install path for the install image? It appears to see the CDROM, boots then looses its mind and forgets a CDROM was attached.
View 13 Replies View RelatedI installed the latest kernel liquorix (2.6.35) but when i want to install the Nvidia driver downloaded on the Nvidia website (256.53), i have an error message because Nvidia doesn't found the kernel source tree.
I install linux-image-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb, linux-headers-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb and build-essential. I don't understand why the installation doesn't works.
I bought a new CDROM drive, as recommended by HP. It still doesn't work. I can open and close it now; so that's changed. But it still doesn't appear as a drive, and I can't use it.
Here's as best as I can describe it:
When starting up, the boot order doesn't recognize the cdrom drive, but I can open and close the drive during this time.
In Windows 7, I can't open the cdrom drive, and it doesn't recognize it in device manager, disk management, or my computer.
In Ubuntu Linux, I can open the cdrom drive, but it still doesn't recognize the cds, and it won't mount.
If I reformat everything, would my cdrom drive work again? Can I reinstall Windows without a cdrom drive? I've deleted the upper and lower filters as was suggested in Google searches. Took the disk drive out and checked that it was installed correctly (no reason it shouldn't have been). Still: nothing works.
I'm on slackware64-current. When I start xfig, it issues a warning "Unable to load any usable fontset". Then, it exits/aborts as soon as I try to browse the library (Shift-l, select a library, bang).Couldn't find much via google about the message. Does it work on your slack current?
$ xfig
Warning: Missing charsets in String to FontSet conversion
Warning: Cannot convert string "-URW-Nimbus Roman No9 L-medium-r-normal--34-*-*-*-*-*-*-
[code]....
Me suman, new in the Linux world. I made a Box with AMD Phenom II X4 955 Processor, ASUS M4A78LT-M M/B (AMD 760G Chipset) and DDR3 RAM.While installing RedHat Enterprise Linux 5, after selecting the Installation media as CD-ROM I am getting the error msg "No Driver Found. Unable to find out any Drivers of the type needed for this installation."Though I had installed Fedora 8 in this box successfully.
View 1 Replies View RelatedI have downloaded fedora 10, i386 and right to DVD/UD using 4x write speed. I have one machine have installed win xp, now i want to over right here, when i select installation , its asking common questions like language, drivers, when i select from Local CD/DVD i got 'No Driver Found' Error.
View 1 Replies View RelatedI browsed through the forums last night for several hours looking for a solution to this and nothing specific to 10.10 came up but i tried several of the methods suggested for previous versions yet none of them seemed to help. the disk spins up when inserted but ubuntu doesn't even show that the drive exist .
View 2 Replies View Relatedi have bt3 and my laptop is a netbook mini compaq 110-111ev so my wirless driver is not installed on it what to do?
View 3 Replies View RelatedMy computer have Windows XP installed and now I want to install suse 9.0. I insert the boot disk (disk 1) and reboot my machine.Then on the boot option window, I select 'installation'. Then comes the error: cannot find SUSE installation CD. Activating Manual.... Then 'English'-->'English(US)'-->'Installation'. Then comes another error: Cannot mount CD-ROM.
View 2 Replies View RelatedI have been trying plop floppy to boot a bootable cdrom from a mobile USB cdrom reader, but the usb cdrom are not recognized.I was thinking that with grub or grub2 or syslinux that would be possible, no ?
View 13 Replies View RelatedI am trying to install NIC driver, at last when I am using command make the following output is coming. How to come out from this error:
Makefile:65 *** Linux source not found. Stop.
Ubuntu was good but i really wanted Mandriva. I have made a working dvd. I know it works because it will install correctly on a virtual machine on parallels desktop.
My problem is, i run the Mandriva dvd, it works and shows me the four options, "boot from hard disc, install ect" i choose install, and then it comes up with "No CDROM device found" i say ok, then it says "which driva should i try to gain MEDIA access?"
Ever since I have upgraded form fc 11 to 14, I cannot login using the KDE desktop, I am forced to use gnome. The problem with that is that KDE apps are not running well, slow and often crashing, when I try to use them under gnome.
Symptoms.
1. Attempting to log in as any user with either KDE or KDE failsafe selected brings up the KDE splash screen, the hard drive icon, and occasionally the wrench icon.. a long pause and then back to the login screen.
2. I have these problem described in other Linux forums and have attempted to implement their recommendations
2.1 Deleted the .kde and other directories associated with KDE, reinstalled KDE.
2.2 Checked the permissions on all the requisite files and directories to ensure that they were good.
2.4 Looked through endless log files for ANY clues.. none
3. KDE applications, like ocular, take about a minute to start up, respond very slowly and eventually stop responding. Gnome applications work normally.
I just bought a netbook, HP DV2-1039WM, which comes with Vista. I wiped the hard drive and installed Ubuntu 9.10. A problem has arisen in that it doesn't see any wireless card. There is a button on the side with an indicator light that is used to enable/disable wireless. The light is amber and, according to the manual, it is supposed to be blue when wireless is working. The manual just says "push the button" to turn it on, which doesn't do anything.
I recently installed a dual boot on my desktop with Windows 7/Ubuntu, which doesn't have any problems. Are there driver/hardware issues with the setup I am trying on this netbook? The HP website only has drivers for windows OSes listed. Theoretically, I could reinstall windows and/or do a dual-boot, but I'd rather just keep only Ubuntu on it if possible.
I have installed knoppix 6.0.1 persistent to a usb flash drive. I am currently testing it on my laptop and have successfully installed the graphics driver for nVidia Geforce 7150m driver 180.51
All looks great until i restart and it doesnt work again. when i go to reinstall it, it says its already there, but when i open the nvidia-settings, it doesnt look the same as before. If i reinstall it, it works again, until i restart of course.In case this is important, here is how i installed the driver in root terminal:
sudo apt-get install gcc make
init 3
cd /home/knoppix/Desktop
sh NVIDIA-Linux-x86-180.51-pkg1.run
(A series of questions come up asking to compile a kernel, etc.)
(install runs)
init 5
I am guessing that the new kernel needed for the driver that is installed is not being booted up on when knoppix restarts. I am just unsure as how I can make this kernel accessible at start up or how to start up this kernel again without reinstalling the driver
I am trying to setup 2-factor authentication for SSH with PAM. Its working well, but if the password is incorrect, it does not ask for validation code, but rather asks for the password again. Any way not to warn about an incorrect password?
View 2 Replies View RelatedI've been with Ubuntu since about 10.10 and a little before, but did a trial. I just installed 11.04 tonight, and my wireless driver is having an issue. I installed it, and reset my computer to complete the installation, but it still doesn't pick up anything wireless, just Ethernet.
View 4 Replies View RelatedNo wireless networking. The ethernet works fine, and the wireless interface itself works well in Windows 7 (dual boot). Tried: Ndiswrapper, notoriously quirky, does not seem to work with the XP driver (the oldest driver available for the RTL8191SE). The linux driver offered on the manufacturer's website lacks any installation instructions. I have no clue how to install a linux driver. SUSE seems to have two network managers that are constantly complaining about control: Network Manager and Yast. Neither are great and I am left missing my Ubuntu.
However, my audio only seems to work on SUSE. I have tried almost every distro on this machine. Ubuntu lacked sound and wireless, Fedora played startup sounds, but would not play an mp3 or wav file (fiddling with the mixer did not help). And Fedora also lacked wireless support. PCLinuxOS, my favorite, lacked sound and wireless. Tried some oldies too. ELE, DSL, Puppy, Ubuntu Netbook remix, Vector, Browserpuppy, Crunchbang, Cruncheee (just for experimental sakes) and probably others I am not remembering. So far, installing a free linux distro has cost me 14 dvd-R's and countless hours of installing, reformatting and reinstalling. Part of me really wanted crunchbang to work, as I love the minimalism and blacked-out theme.
I need wireless network access. The wireless light remains red in Linux and pressing the key does nothing to start the device. In Windows 7 it always lights white and works perfectly. Why hasn't SUSE adopted a gui for ndiswrapper? Other distros have it. Why is my brand new laptop, which is by no means abnormal in make or configuration, not 100% supported natively by any Linux distro? I just updated to the new kernel yesterday. So I should be running the most modern operating system available. Yet good-ol Windows 7 is my only fully functional environment.
An a stable FC13 system, after resolving deps and downloading rpms, 'yum update' aborts with this single error message:Transaction Check Error:installing package kernel-PAE-2.6.33.5-124.fc13.i686 needs 801KB on the /boot filesystem.Silly thing is, I have at least 52MB available on /boot.An important datapoint is that I resized the boot partition since the initial install from 64MB to 128MB, which makes me think perhaps yum or anaconda recorded the original partition size, and is not looking at the current (correct) size of /boot.
View 2 Replies View RelatedI'm trying to use a flash drive to try to repair the Intrepid installation on my netbook.
when I drop to a terminal and try "sudo apt-get update" i get
Code:
sudo: unable to resolve host ubuntu
E: The method driver /usr/lib/apt/methods/https could not be found
E: The method driver /usr/lib/apt/methods/https could not be found
Sometimes the linux install CD does not recognize the disk controller
I am asking is there a way to customize the disk and add such driver
if yes :
what files from the driver to put and where to do that?
I have problems with my USB driver. After adding my device (MSP430 USB-DEBUG-INTERFACE) it doesn't work.
[ 60.476039] usb 2-2.1: new full speed USB device using uhci_hcd and address 8
[ 60.693959] ti_usb_3410_5052 2-2.1:1.0: TI USB 3410 1 port adapter converter detected
[ 60.693981] ti_usb_3410_5052: probe of 2-2.1:1.0 failed with error -5
I try to do: modprobe ti_usb_3410_5052.No changes.It's Linux
Linux ubuntu 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:44 UTC 2011 x86_64 GNU/Linux
Wehn I enter the command mkdir /mnt/cdrom, I get the message "Cannot create: Permission Denied". How do I fix this?
View 2 Replies View RelatedFedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:
Code:
Entering non-interactive startup
Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored
[code]....
I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?
Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?
When I run the command:
"sudo apt-get install build essential autconf automake libxmu -dev"
I go the following error:
"E: Package autoconf has no installation candidate"
In the cd-rom there is no any autconf package.
I'm attempting to install Lucid on a new Acer Timeline X 5820T and having a tons of problems.
First of, I've got no internet connection either wired or wirelessly.
I've found several posts claiming that the ethernet card just needs a driver installed to work correctly.
However, to make the driver I need build essential installed, but no problem, I've got my CD, I'll just install them from the CD.
However, when I attempt to install them through synanptic it tells me that it:
Code:
Failed to fetch cdrom:[Ubuntu 10.04 LTS_Lucid_Lynx_ - Release i386 (20100429)]/pool/main/p/patch_2.6-2ubuntu1_i386.deb
File not found why it can't fetch the cdrom? Ubuntu recognizes it and I can browse it just fine.
I managed to boot from hard disk, everything works ok. But Gparted has a bug, it works in Live Hard Disk, but not when I click the install icon because it can't umount /cdrom. But I solved that by formatting ext4 and swap area from gnome-panel Live Hard Disk and only put mount point / after click on install.But problem stroked back: install is not possible because it wants to umount itself before installing, wich cannot be possible. I'm installing it in a new place /dev/sda5. Live Hard Disk is booting from /dev/sda3.
ubuntu@ubuntu:~$ df -h | grep sda
/dev/sda3 2.0G 726M 1.3G 36% /cdrom
/dev/sda1 43G 17G 26G 41% /media/Windows
[code]....