I want to wipe the drive to the bios before shipment back to factory. I tried Daricks nuke but it wouldnt burn to usb with the usual programs. What program will TOTALLY nuke my hard drive and work with netbootin or other UBU program..?
So in essence, my drive has become a cluster of random partitions, multiple Ubuntu installs, and random windows systems. It's gotten so bad that on my entire 250gb system my main Ubuntu install only gets 40gb of memory. Could anybody give me a step by step guide to do the following:
1. Completely wipe and departition my disc. 2. Install Ubuntu from a backup .tar file 3. Install a 40gb windows 7 partition
I had Ubuntu on my hard drive and tried to install Arch Linux. Things got messy and I now have an unstable, unbootable machine. I feel the installation failed because there were remains of Ubuntu. I'd like to wipe the hard drive and start over from scratch; without anything on there. How do I do this? I have several partitions made in a desperate attempt to make it all work. So I'd like to remove all partitions and any other information that's on the drive. I can not start any OS, but I can boot with the Live USB of Arch Linux...
I am trying to wipe the hard drive on an ancient laptop. The current plan is to find a live distro that can run shred or equivalent program. The problem is that most ultralight linux's don't seem to work with the RAM restrictions (Optimistically 80 MB, Worst Case 16 or less). I will likely have to just bust open the case and physically mutilate the Drive I would prefer a more 'civilized' approach (defined as one which keeps the machine in one functioning piece).
Model: Dell Latitude XPi CD Processor: Intel (Inside) Pentium (one?) MMX Available Media: CD, Possibly Floppy (I have access to only one other machine with a drive) OS: Windows 95
I am having a hard time getting any farther specs. If anyone knows of a distro that has a prayer of running in these conditions I would love to know.
Current candidates: Puppy Linux < 1.0.2 DSL (Unsure of architecture compatibility)
find out the total amount of free unused partition space in a hard drive?
reason:
-- when i use fdisk to create a new partition; its hard to tell how much free space is available. -- tried searching the net but found no answers. some suggested using cfdisk. -- i don't have cfdisk installed on the centos 5.3 server. i don't think its bundled in the distro any more.
I recently used a flash drive to try MeeGo on my netbook. Unfortunately, the application I used to write MeeGo to the flash drive created a new partition in a rather unusual format. The Ubuntu disk utility can't delete the partition, and GParted can't even see it. How can I completely wipe the flash drive from Ubuntu? I'd prefer not to install any additional software.
I have a real love/hate relationship with Ubuntu. A few weeks back my Windows XP crashed and I had to take it to a tech to have my drive wiped and the operating system reinstalled. Just when I got XP back up and working perfectly someone told me to try Ubuntu. I made the Ubuntu 10.10 boot installation disc and installed it. Although I partitioned the drive during the install I was never able to reboot to Windows and thus lost all the files and programs I had just finished installing.
Okay. long story short: I got used to running Ubuntu and started to like it. Then this morning I was prompted to upgrade to Natty 11.04. After the install I got a message about being low on utilities and to boot in the Ubuntu Classic mode, which I was not able to do.
So now my machine is virtually non-functional. It won't run any programs but sometimes if I'm lucky I can get the computer to shut off without pulling the plug from the wall. I think I just need to wipe the drive and start over. Can someone tell me how to do this using DOS without having to make another long trip to my tech? Luckily I have a Windows XP laptop to use to access this forum.
What should be done to completely wipe clean a solid state drive (before selling a computer)? What should be done for a regular drive, and what considerations apply to a SSD?
I got a dell inspiron 1501 laptop with a 80Gb sata drive what is the best solution to add data storage space for someone that love to have multiples operating systems at hand Note: I use mostly linux so I won't need to change my laptop for many years maybe ...
My parents bought a new hard drive for a laptop that I've owned for several years. It's much larger than the current one, so I plan on splitting it up to dual boot it with Ubuntu.I have no problem with partitioning a drive (I always keep a LiveCD handy), but my question is this: how can I go about moving the existing partition to the new drive? This is a laptop, so I can't simply plug the new drive into another slot.
Also, even if I manage to move it, will Windows still work on the new drive in a larger partition? I've had this laptop for quite a while, and I've lost the recovery discs that came with it a long time ago. I also have a lot of software without CDs to reinstall them with. This makes not reinstalling Windows a high priority.
Trying to install Fedora 12 using the 6 CDs. Trying to install on an older x86 box.Problem is that when detecting my hard drive, Fedora 12 recognizes it as a sda hard drive instead of hda hard drive. I have no SCSI connected to my computer what so ever. It's an old fashion PATA Western Digital hard drive.If I proceed with the install, Fedora 12 only installs 200MB of the OS from the first CD only. No options for additional software or anything.
I have a laptop with only 30GB storage and I want to install Lubuntu in virtual box but Lubuntu needs 5GB of storage space which i dont have. Could i use an external 160GB hard drive to act as the hard drive for the virtual machine without affecting the files that are already on the external hard drive
I recently bought 320 GB Trancend external hard disk and working fine days back.Earlier i could copy from and to the hard disk with out any issue. I dont know what happened after that now i am not able to write any files in to the external hard disk. This is not NTFS formatted device. here is some of the out put from terminal.
Code: sundar@sundar-sundar:~$ fdisk -l Disk /dev/sda: 120.0 GB, 120034123776 bytes
I have been trying to install centos on my hp servers and when i get to partitions my hard drives the OS does not detect any harddrives. I have 4 scsi drives and i believe a intergrated smart array controller.
is there a way to write/unpack .qcow2 hard disk image directly to real hard drive in Linux?(I know it's possible to unpack .qcow2 to .raw and then dd to drive, but I'd like to skip .raw since its large)
I have a SATA drive that worked fine. Then I installed two more hard drives into my system. When these hard drives are installed, if I try to access the SATA drive in Linux, it will start lightly clicking and then the drive will become unavailable. If I power on the machine without the other two hard drives then it works fine. What could be causing this to happen? I don't think it's heat because the two hard drives are far away from the SATA drive.
i have ubuntu 10.10 installed on a 40gb hard drive and have setup arch linux on a seperate 160gb drive and am at the Choose bootloader screen of Arch Linux. My question is do i use arch linux to reinstall GRUB or do I choose none and configure GRUB to see both? if its the later can you tell how. Oh and Ubuntu is on sda and Arch is on sdb
I just booted one of my computers from a usb drive I had installed Ubuntu 10.04 LTS to, and when I booted it up on that computer, it worked fine. Then, when I powered down the computer and booted it back up to the main hard drive, it booted to the same that my flash drive was running, but my flash drive was not plugged in!! How is this possible? Did it copy itself over my other operating system? There is no trace of it. By the way, that, too, was ubuntu 10.04.
I would like to install Linux Ubuntu 11.04 on an external hard drive - its partitioned and ready for Linux.I've downloaded and burnt the .iso file to a DVD so its all good so far...First of all... is this possible without messing up my macbook? I don't particularly want to break into my macbook to disconnect the hard drive (I read on a tutorial for a previous version of Ubuntu that I'd have to do that... - does it still apply to 11.04?) - as it voids the warranty (I checked ).The reason I ask this is because I had a friend who partitioned their internal hard drive and installed Ubuntu on it. But after installation was complete they couldn't boot up Windows 7 or Ubuntu... and it resulted in them having to clean install Windows 7... - I don't want to end up in that situation
Second... If it is possible to install it without messing up my macbook... - Do I just follow the install instructions but just make sure that where possible I make sure that everything is installed on my external hard drive?...I really need someone to put my mind at rest that everything will run smoothly and that I'll be able to run Mac OS X as usual but also that I'll be able to boot from my external hard drive to run Ubuntu.
I am trying to move a whole bunch of files from one partition on one hard drive to the same partition on another hard drive. Can I mount the same partition (same name, different drives, i.e. /data on /dev/hda1 and /data on /dev/hdb1)and copy those files? Shutdown the server, take out /dev/hda1 and boot up with the new drive and it's /data contents.
I have ubuntu server acting as a router installed on a 60 gig drive, i'd like to use that drive in another machine and replace it with a 5 gig drive. how can i transfer from the 60 gig drive to the 5 gig drive?
I am soon going to have to return my intel ssd for replacement. Therefore, I am going to be cloning the 160gb drive to a 320gb drive to keep my system settings while I am waiting for my new drive. I will not change the size of the partitions to fill the 320gb drive. I'll just change the grub settings if I absolutely have to. After that, I am going to have to clone the 320gb drive back to the replacement 160gb drive. Am I going to have problems doing that since I will be going from a larger to a smaller drive?I typically use Clonezilla with the default settings.
I want to load ubuntu on my home pc. I have two hard drives but not have enough dvd's to back everything up on #2 hard drive. If I load ubuntu on drive 1 can I get in two drive two?
I have 350GB external Western Digital USB hard Drive.When I try to remove it from the system by executing Safely Remove Drive menu the fedora 15 system gets stuck.The processor starts giving a hum sound and it goes on even if it is left for half an hour in the stuck state.The Mouse is not working and everything is halted.
I have minor problem with upgrading a hard drive. I am running an old pentium lll with two hard drives. On the first hard drive I have two partitions of around 90GB each. On the first partition is installed winXP and on the second partition I have Suse 10.3, both booted by grub and living happily side by side. My second hard drive (which is formatted for windows is only 4GB.
My problem arises when I try to replace the 4GB with a 80Gb hard drive. When I disconnect the 4GB drive the system fails to boot up and complains with error 21.
i have installed fedora 14 with so many libraries ,development tools installed on my pc but i usually have to present some projects which can run on my system .........and can't be executed or compiled due to absence of libraries and tools there so, i there some way to so that i can use this current installation on my hard drive of my pc to some external media like external hard disk and plug and use that installation anywhere on any system..