Hi!
I've been frustrated with several problems I've been experiencing with Karmic Koala. The one I'll mention in this post is the fact that it randomly decides to adjust the system clock ahead 6 hours. I believe this began happening when I set the location for the system time that displays in the top panel. I'm guessing that the 6 hours is the fact that I'm in the US Central Time zone.
Everytime I boot up my computer the clock is 3 hours behind. I have Ubuntu 10.04 LTS and had it on another computer and never had this problem before.
View 3 Replies View RelatedI am running a LAMP system with CentOS 5.4.The clock just automatically shifted backwards by 19 hours and 30 minutes crippling some of my reports and probably damaging something else along the way.The router supplying IP to this server is a DD-WRT and shows proper time.By the way what does that mean? time drifted by that 33.667 ms?
View 8 Replies View RelatedMy computer has two physical hard drives. Up till now, the first hard drive was for Windows XP and Windows 7, the second was used for file storage. I just installed Lucid Lynx on the second drive. The two problems are as follows.
<s>1. When I boot into Windows 7, the clock is set ahead by five hours, even as the time zone remains the same. </s> Terribly sorry. Found the answer in another thread. Should have searched.
2. I have kept the Windows 7 boot loader (choice of 7 or XP) on the first hard drive, and put Ubuntu and grub on the second hard drive. That way, if I want to load Ubuntu, I press F9 for the hp boot menu and select the second hard drive. From there, I would like this to boot straight into Ubuntu. How do I keep the grub boot menu from appearing? Should I just edit grub.cfg, so it has a timeout value of 0?
I noticed that the language es_ES (Spanish Spain), has a problem, you can't put the clock in 12 hours format, I was googling for a while and found that it should edit the file
Code:
/usr/share/i18n/locales/es_ES
Find these lines
Code:
am_pm "";""
t_fmt_ampm ""
and replace with
Code:
am_pm "<U0041><U004D>";"<U0050><U004D>"
t_fmt_ampm "<U0025><U0049><U003A><U0025><U004D><U003A><U0025><U0053>/
<U0020><U0025><U0070>"
But I did it and still don't show me the option to change the clock to 12 hour format, I tried changing the es_NI language (Spanish Nicaragua) and gives me the option of 12 hours, but the languages of programs like firefox, thunderbird, openoffice change to English.What can i do to have language es_ES and 12 hours format on my clock? or es_NI language with firefox, thunderbird etc. in spanish?
When I shut down the machine everything is as it should be. Time set from the net, hwclock synced. When I boot again, time is set several hours into the future. This is an additive process, when I don't set the correct time it drifts with every boot even days into the future (until boot is denied, because files are too far in the future). I tried to get rid of that behaviour by doing:
Code:
sntp -P no -r pool.ntp.org
hwclock --systohc
I renamed /etc/adjtime which looked like this:
22292.201093 1289670517 0.000000
1289670480
UTC
Now it looks as follows:
0.000000 1289733620 0.000000
1289733620
UTC
To no avail. What could cause that and how can I correct it?
I have Fedora in dual boot with windows on a laptop. I have a weird clock problem. If I get the clock set correctly in Fedora, then it's 4 hours too fast in Windows. When I fix it in Windows and then restart into Fedora, it's 4 hours too slow in Fedora!Why are they competing with each other and how do I get them to both be correct?
View 6 Replies View Relatedi probably messed up the clock somehow... I think during install. Linux keeps messing up windows clock... And vice versa... When the clock in windows is correct (say, 2 PM), the clock in Linux when i reboot says 4 PM... And when i set up the clock in Linux to the correct time (in this case 2 PM) and boot into windows, windows clock says 12 PM...
Of course, when i correct it in windows, linux clock gets messed up again... 2 hours early or forward, idk... I'm not sure what i did to make this happen... Maybe has something to do with hardware clock... I don't wanna constantly correct time whenever i change systems...
I'm having a VPS using Ubuntu 10.4 and i would like a guide on how to restart apache2 process every few hours (a time determined by me).
View 11 Replies View RelatedI've an Blade 1500, sparc64 IIIi with 2 hard disks and 2go of RAM. The computer run with debian 7.7.0 and BSD (opensxce) for each hard disks.
1/ When it's run under BSD there are no problems, the uptime are on many hours.
2/ when it's run under debian with XFCE x-window, the uptime is 4 hours 30 minutes and computer reboot automatically !
Into the control panel i've deactivate the hibernation, screensaver and power management ! I want to find the files for manage the time down. I think that the problem is in XFCE window manager.
I have a switch tray on my computer and I installed opensuse in one of the hard drives that I have but as I switch between the windows hard drive and opensuse the time changes all the time. For example it's 10pm right now and if I switch the hard drive to opensuse the time automatically gets adjusted 4 hours back and then I fix it and when I switch back to my windows hard drive the time goes forward 4 hours. I check both region settings and they are both set to NY Eastern time. Why is it doing this?
View 2 Replies View RelatedI'm trying to set up the Alarm Clock app to automatically launch Rhythm Box and begin playing a specific internet play lists I have there. I have one template set up to launch Pandora and I could probably get it to launch Rhythm Box but, how do I get it to launch Rhythm Box and begin playing a certain radio station playlist?
View 6 Replies View RelatedI use Slackware64 13.1 and this Sunday the hour change and ntp daemon don't start automatically and my clock is an hour late. It's normal or a bug?
View 20 Replies View RelatedI was installing "wine" last night and since I knew it was going to take a while I closed the lid of the laptop and turned it upside down on the floor. (I always turn the laptop upside down when not using it otherwise might overheat)When I woke up this morning roughly 8 hours after I went to sleep the machine was turned off.Using the "last -x | grep shutdown | head -1" it stated that it went down at roughly 6 hours from when I went to sleep.The program I was installing got finished installing but I never set up an auto-shutdown program or anything of the sort.If this isn't a problem with linux then its a problem with my bios. If its a problem with my bios I will just have to live with it because my bios is locked. /var/log/messages says this:
Code:
alexslaptop logger: ACPI event unhandled: battery BAT1 00000080 00000001
alexslaptop shutdown[14933]: shutting down for system halt
[code]...
I have a fedora 12 server on which the time is advancing very slowly, 1 sec every 20 sec.Does anyone have an idea what is wrong
View 14 Replies View RelatedI built up a system using opensuse 11.1
the systems main work is to be a smb server and a ftp server
if the system is started it runs perfectly but after nearly 10 or 12 hours running without any server or ftp action the systemspeaker permanently beeps
no error in errorlog and sensors are showing fine temperatures . i tried 2 different boards (asus p5qlpro , msi p6mgm fd) with different speed intel dual-core processors
Grub loading wait error 21 - system this way for hours
View 4 Replies View RelatedI am having a problem in Amarok. Recently I am using the following version of the software:
Code:Amarok Version 2.2.0 Using KDE 4.3.2 (KDE 4.3.2) The problem is that the seek bar is not working.Whenever I play an audio file the seek bar advances to show the progress. However, when i try to drive that seek bar manually with my mouse there is no effect. As i result I can't go to the desired position as I want.
I triple boot with XP on the first partition, sidux on the second and third and Ubuntu on the fourth. sidux controls grub2. When I boot into XP or Ubuntu, my clock gets set ahead 4 hours to UTC time (I'm on Eastern daylight time).
Is there a way for all three OSs to display the right time?
I have my clock set to use "Public Time Server (pool.ntp.org)" but it's actually off by 10 minutes (and I think it's getting off by more and more each day).I had previously had it set manually, but it was getting off by more and more every day, so I thought using automatic time set would fix the issue.
View 9 Replies View RelatedWrong system clock; Right hardware clock. 'date' and 'hwclock --show' show big differences in time. Hardware clock keeps the correct time, but 'date', the system clock, doesn't (often wrong in a matter of hours). So I'm sure it is the problem of the kernel. I'm tired of synching hardware clock with the system clock all the time. How do I get Ubuntu to use the hardware clock instead of its own in the first place?
View 9 Replies View RelatedTry as I might I cannot seem to get the system clock to display local time. It looks like it's stuck on GMT. In the System>Administration>Time and Date I have my local time zone set correctly and also set to update automatically with an appropriate time server selected. It still displays my local time +5 hours (I'm central time, USA).
View 6 Replies View RelatedI'm completely new to Linux. I'm having the hardest time trying to do the simplest things. I'm using Kopete and I was wondering if I can put the icon on the system taskbar by the clock? I can't drag it there, won't work. I also tried to right click the taskbar and open 'add new items' but Kepete doesn't show on the list.
View 3 Replies View RelatedI restored my .kde directory after changing some stuff unrelated to my clock and now all plasma clocks are exactly 5 hours faster than my system time (the correct time).I've set the time zone for Date&Time in System Settings properly and that's working well and I've ALSO gone into the time zone settings for the plasma widgets and switched between UTC and Local manually but that doesn't do anything.
View 7 Replies View RelatedI've set-up dual boot on my laptop. Ubuntu installed first, then Windows 7 so it uses Grub2 to control the booting on start-up. I've noticed that my system clock goes out by an hour on both OS's, I change the clock to correct time & on reboot the time is usually (not always straight away) an hour behind. Has anyone else had this problem & know how to fix it?
View 4 Replies View RelatedWhile dual-booting Windows and Linux, Linux sets the system time to UTC, so Windows thinks it's midnight near mid-morning. Is there any other way to tell Windows to use UTC? I've seen the registry tweak proposed here and other places. This does not work on my computer (Windows 7 32-bit).For reference, the registry entry is this:HKEY_LOCAL_MACHINESYSTEMCurrentControlSetControlTimeZoneInformation]"RealTimeIsUniversal"=dword:00000001
View 1 Replies View RelatedToday I updated a bunch of packages, rebooted. I run lucid 10.04 x86_64, originally Xubuntu but now gnome since I cannot make xfce4-panel tasklist behave with compiz. Anyway, by the end of the day my clock was 10min off. If I use ntpdate at about 10min intervals I see things like:
$ sudo ntpdate time.xxx.xxx.de 1 Jun 18:37:02 ntpdate[9734]: step time server xxx.xxx.xxx.xxx offset 10.043055 sec
I have deleted /etc/adjtime and touch'd a blank file to no avail.
Is this problem serious? Is it likely software or hardware? Is running an ntp daemon the right solution or would it be masking a new software or hardware problem that appeared today?
Unlike FC14, in FC15 there are very limited options available in Date and Time settings.
I want to see day of the week, date and time with seconds in my clock panel.
I was able to get first two using "gnome-tweak-tool".
But I'm not able to display seconds in the clock.
how to enable seconds in the clock?
the time on system clock given with 'date' command keeps moving forward about 1 minute for every hour of realtime. The box is up all the time so this is not an issue with motherboard battery. An equivalent box with the same hardwre/OS and applications doesn't have the same level of drift. I'm not sure what else this could be.Both boxes are Centos 5.2 64-bit.
View 2 Replies View RelatedI need to be able to sync my linux box to something like www.worldtimeserver.com
how? there don't seem to be any 3rd-party apps for it, so is it already in linux?