I'm not sure what to do. I have a Vostro 1700 with ubuntu Hardy. My soundcard seems to be mal-functioning but I am not certain how to check or what to do about it. My Out jack on my Soundcard works but if i don't have speakers attacked to my laptop I will have no sounds.
I bought a multifunction stylus sx218 Espon model and I can not run the scanner function. I did some research and found a few solutions and very functional. I hope someone solves the problem. My version of openSUSE 11.2.
I am doing some Linux kernel programming for my research project. I need to record the timestamp (by using cpuid and rdtsc) when an interrupt handler (top half) is first invoked. Due to the time critical nature of the problem itself, I have to do the timestamping inside the interrupt handler itself (the first operation when the handler is called). However, I understand that tasks that are not so time critical should be deferred to a tasklet function (bottom half) for processing because other interrupts are disabled in a (top-half) interrupt handler. I am currently out of idea on how I can pass the timestamp information that I have obtained in the interrupt handler to the corresponding tasklet function.
I'm currently using OpenSuse 11.1 web server. This is bad since 11.1 is no longer supported. the reason why I am using it is because Function set_magic_quotes_runtime() was no longer being used. (so I was told)
That being said, is there a way to get Function set_magic_quotes_runtime() to function on the newer versions of OpenSuSE?
the function terminates if no key is pressed for 10 consecutive seconds. I tried using the -t option as suggested in some forums, but my version of showkey doesn't have the option of changing the timeout. The options I get are:
-h --helpdisplay this help text -a --asciidisplay the decimal/octal/hex values of the keys -s --scancodesdisplay only the raw scan-codes -k --keycodesdisplay only the interpreted keycodes (default).
Is it possible to write a script to use this function and still keep the function active until an interrupt is recieved?
I looked on the net for such function or example and didin't find anything, thus after having made one i guess it would be legitimate to drop it to see what others thinks of it.
#!/bin/bash addelementtoarray() { local arrayname=$1
I experience this since kde 4, but it never really was that bad because once in a while on updating kde I also deleted the .kde folder in my home-folder and everything was fast again.
But I haven't done this for a while now and kde take really long to load. Is there any folder to clean up there without deleting the whole .kde-folder and loosing all my settings again?
Through the command prompt, mainly wav files, wanted to see if there is any way to get this done?That would be the pc speaker on the board, I can get it to beep at frequencies.
Everything was fine until I upgraded to the Beta 2, now the sound only comes out of my left headphone speaker and stereo speaker. My sound settings are the same and I have double checked them.Anyone else having this issue? Anyone know how to fix it?
I thought the message received sound was too quiet in Empathy 2.32.0.1 and figured out that it was playing the file located here:[URL]...I replaced this file with a more suitable sound file but I have since noticed that the sound is only playing through my right speaker. I don't know if this was happening from the start or if I caused it by changing the sound file.
Playing the sound file manually proves there's no issue with the file as it plays correctly, through both speakers. I have no other sound issues.
I have a HP Compaq dc5750 desktop pc, which has a internal speaker for audio playback. My problem is that I can only get audio from this speaker, when I plug something into the rear jack stick, the sound still comes out of the internal speaker. I have tried to install alsamixer and unmuted AUX and Line IN, and increased volume to 100%. Sound is working, but only on internal speaker!.
explain to me how to get sound through the internal speaker of my computer. Everything else works fine. IE, if I plug in a headset or boxes, they work fine.
So sound from the speakers on my laptop (hp mini 311) quit working randomly. I either installed an update or just rebooted and it quit working. The sound from the headphone port still works but that is annoying.
Here is some information about my hardware. Code: *-multimedia description: Audio device product: MCP79 High Definition Audio vendor: nVidia Corporation physical id: 8 bus info: pci@0000:00:08.0 version: b1 width: 32 bits clock: 66MHz capabilities: pm bus_master cap_list configuration: driver=HDA Intel latency=0 maxlatency=5 mingnt=2 resources: irq:23 memory:d3100000-d3103fff
and I can't seem to get it to come back. does anyone know how I can get it to come back? It's really inconvenient having to open System > preferences > sound just to change the volume on anything.
I'm currently running Ubuntu Netbook Remix on my HP Mini 110-3000 and I get no speaker output but the sound works when I plug my headphones in. I downloaded Alsamixer and played with the setting but nothing helped so now I turn to you guys.
So, I've got an Acer 5742G, and the silly thing is only built with one internal speaker. Ubuntu thinks it's my left channel, however Windows 7 'gets it' and plays both channels to that speaker.When I plug in external speakers or headphones, everything works fine.
I do not find any settings to switch the stereo output in Ubuntu, just now my speakers is placed so right speaker stands to the left and I can not move them just now. How do I do, I use Ubuntu 11.04.
There is no audio output coming from the inbuilt speakers. when headphone is connected, audio is available with headphone. But not with the internal speaker when headphone is not connected.
making some changes after having some issues with my virtualbox and I accidentally removed both the speaker applet and the Evolution email in 10.04, from the upper right panel.Is there an easy way to add these back through the GUI? I have been looking but cannot seem to find where they would be located.
This is for all of you who are having problems getting sound out of the PC Speaker, as far as getting the system beep or system bell. In Karmic (9.10), a change was made to get rid of the system beeps and disable the pc speaker. Unfortunately for people who liked (or more likely need) the beeps, the changes occurred in multiple places and are not that easy to find. The pc speaker and beeps were disabled in response to this bug. I believe there were other bugs dealt with here because not everything that was done seems to be covered, if that makes sense.
This bug was created in response, in hope of getting the beeps turned back on. This post by one of the developers has some pretty comprehensive instructions for getting the beep back on. I want to note right now, that I did not have to apply his patch to get the beeps back on where I wanted them. It may already have been included in an update, or was obviated by something else I did. I realize this is pretty fragmented, and you may or may not want or need to go as far as I did with this. When I get a chance to do a new clean install of Karmic (maybe in a vm or something) I intend to go back over these instructions and try to create a synthesis of them that should work for certain. If I can, I'll figure out a way to script it.
One other thing I should point out. I didn't get the bug where I had to reload the pcspkr module on every boot, so that must be fixed. (I did have to remove it from the blacklist so it would be loaded on boot, but I didn't have to kill and reload it or add it to rc.local like some people did in those descriptions). I also did not get the bug of an endless loop of beep sound or multiple beep sounds, but that only happened to people who followed the directions to change the system beep to another sound.
I'm relatively new to Ubuntu, so please forgive me if I seem a little ... After installing Lucid Lynx, I had some sound issues that I've been attacking over the past few days. I've gotten it down to the point where .mp3s and other sound effects play on 2.1, instead of my full 5.1 setup, with the exception of using Code: speaker-test -Dplug:surround51 -c6 -l1 -twav which will play from every speaker. Relatedly, I have no volume control icon in my toolbar, and when I go to System --> Preferences --> Sound, an error window pops up that says, "Waiting for Sound System to Respond." Currently, I am using the ALSA Mixer GUI to adjust my volume and whatnot. My sound card is a Sound Blaster Audigy SE CA106, and here's the yield from various terminal commands:
Code: uname -a Linux DeskingtonJefferson 2.6.32-22-generic #33-Ubuntu SMP Wed Apr 28 13:27:30 UTC 2010 i686 GNU/Linux Code: aplay -l
I recently switched from Ubuntu to Lubuntu on my Acer Aspire netbook. When I had Ubuntu, in System Preferences I had a Sound mixer that would allow me to set the volume beyond 100%. It simply said "Sound" and was different than the applet feature. Both were preinstalled. With Lubuntu, I seem to have lost this option. I went through and installed Gnome ALSA Mixer along with Pulse Audio Control, but neither does what this simple volume control feature on Ubuntu did. My speakers are horrible, and the previous "Sound" feature really let me crank it up a bit. I'm not trying to blow my speakers out or anything;
I'm just installed 10.04 on a new Gateway DX4300. The integrated sound card is a Realtek AC1200. Sound works great, however, I'd like the rear input to mute when I plugin my headphones in the front input. Where can I configure this? Here's some basic information:
I'm still on UBUNTUO 9.04 atm - I'm getting myself a Logitech USB headset. I plugged it in, and immediately I see this in dmesg
[ 7015.732141] input: Logitech Logitech USB Headset as /devices/pci0000:00/0000:00:1a.1/usb4/4-2/4-2:1.3/input/input11[ 7015.732234] generic-usb 0003:046D:0A0B.0006: input,hidraw3: USB HID v1.00 Device [Logitech Logitech USB Headset] on usb-0000:00:1a.1-2/input3 [ 7280.088017] usb 1-3: reset high speed USB device using ehci_hcd and address 3
Which is fantastic. Tested this on all kind of audio and I can hear them fine. So headset is working wonders. Except, everytime I want to switch the output from between the speaker and the headset, I have to go System > Preference > Sound > output tab > click on the switch. Which is fine, but the switching procedure via GUI is very arduous. Is there a way to to do this via the command line, if so I can bind it to a hotkey and therefore with one hotkey I will be able to switch between headset vs my speaker?
One of the left speaker on my macbook 2,1 has no sound. The channel is not muted in alsamixer. If you go into sound preferences and change the card to a surround 4.0. The both the front and rear right speakers work. Front is higher sound (tweeter) rear is the lower sounds. (mid-sub) however on the left side the left front does nothing. to the naked ear you can tell not as much sound is coming out of the left side. one speaker is not functioning. is there a fix for this?
I've got a final revision of the G4 Mac mini, the 1.5GHz model, dual booting 10.04 LTS and OS X. One of the issues I've had is that the internal speaker doesn't work under Linux, or so it's been reported on various post and sites. It turns out it's a simple matter of flipping some ALSA control options. With an ALSA mixer you must enable both the Speaker and the Headphone to get audio to play over the internal speaker. It will still play over the external headphones/speakers if they are still plugged in. I'm not sure if this is a problem with the ALSA, OSS, PCM or snd_powermac drivers or just something setup wonky in the configs. I've used both GNOME ALSA Mixer GUI and the alsamixer command line tool to do this. The alsamixer tool will mostly work in an X-term, as the F-keys don't pass though. It is fully functional on a console login. I also noticed that audio plays back per-user. When I switch from X to a console he sound is cut off, and when I get logged in as the same user the audio comes right back in.
Using Natty Narwhal, sound works, but the icon disappeared up in the panel. Not that big a deal, other than it shouldn't have happened, so its go t me curious.
I bought a $400 Dell Vostro V130, and decided to put 10.10 netbook remix onto it. (Vostro V130 owners: after the reboot into the new system, there is no GUI. worse, after log in, a startx means the screen goes dead. fortunately, a power key event is still detected, so reboot still works cleanly. after I did a full apt-get update, apt-get dist-upgrade, and apt-get upgrade, the screen and remix worked.)
I would now like to increase the bass, systemwide (so that ..... gets sound that is a little better). the speaker icon on the top right gets me into sound preferences, but I do not see an equalizer.