my file server i am trying to replace a small 30gb disk with a larger one i just purchased. i need to find a way to backup the data on it to another part of the lvm and then remove it hopefully with the backup and the rest of my data intact.
View 8 RepliesI have an SiI hardware SATA RAID card, with two 500GB disks in mirrored RAID configuration. When I first plugged them in and set it up, things seemed to work ok, but on boot the raid controller told me that the RAID needed rebuilding, and it would happen automatically after POST. So I didn't worry about it, and the drive mounted fine, and it's been that way for years. I just went in and manually on-line rebuilt the RAID in the controller's BIOS, and now when I boot into Ubuntu, both disks show up in fdisk, but neither show up in /dev/disk/by-uuid. Am I missing something?
View 9 Replies View RelatedI have windows XP on one disk, I added another disk and I installed UBuntu 9.10 on it. I wish to temporarily remove the ubuntu disk, however grub cannot load unless that disk is connected. It appears that grub has got to the windows disk and my system was booting from there. I wish to remove grub from all disks, (or at least the windows disk). I tried removing it from the synaptic package manager, but it's still there (but it looks different, maybe another version loaded or something). I'd like to just be able to boot from either disk using my bios boot menu.
View 6 Replies View RelatedI was told I don't have Ubuntu installed, how do I remove "wubi" of my hard disk. Can't find it anywhere in partitions or anything.
And would anyone know a Free FTP Backup server for about 6gs of space so I can backup my music & such?
I'm having very unpleasant experience with fedora 7. I have removed all my windows and installed fedora 7. AND IT WAS NOT BEAUTIFUL AS I THOUGHT!. AND I need to remove it now.
BUT UNFORTUNATELY THAT DOESN'T ALLOW TO REMOVE USING WINDOWS XP BOOT DISK.. SO UNFAIR.. SO HOW CAN I REMOVE It.
Is there any way to remove the whole disk encryption without reinstalling? I'm running Ubuntu 10.04.
View 2 Replies View RelatedI know you can fail and then remove a drive from a RAID5 array. This leaves the array in a degraded state.
How can you remove a drive and convert the array to just a regular, clean array?
i want to remove the quorum disk from one of our Linux server (Enterprise Linux Enterprise Linux Server release 5.1).I am attaching the current setup. stopping the pkg & cluster what i have to do .or what will be the procedure.I am not interested to put a new disk. i just have to remove it & make sure that without having a quorum it's working fine.
View 1 Replies View Relatedis it possible to install with just the very min of things, no GUI, etc so I can use it as a compact OS for an old Pentium2 system with a 10 GB hard drive? Should I have downloaded the server edition ISO for this? Is it possible to remove everything down to the bare min without the graphical junk from a Desktop CD disk install? Maybe I should use [URL]
View 2 Replies View RelatedI was trying to install Fedora 9 on my new laptop that came with Win XP. I have selected the option to wipe out all partition and create a default layout with the Encryption option selected. But that installation got stopped on the middle, therefore I have started the installation again. This time it asked for the encryption password as expected but don't know why, its not accepting my password. I am 100% sure that the password is correct but it is not allowing me to enter into the hard disk partition section.
My question is, how do I remove encryption from my hard disk? I don't need to preserve the data, I just need to use my hard disk again. Is there any boot CD that allow us to format encrypted disks without prompting for a password?
1. An external hard disk with VFAT32 file system has a continuous 23GB file (old HD disk image). It is too large to 'remove to wastebasket' and unlike MS Windows remove to wastebasket does not sense file size and wipe file index .
How to remove a large file in SUSE 11.2?
Can't delete files from external hard disk.
Getting message,"Input output error or unreadable/corrupted file"
Is there any way to delete this?
I had Vista on my laptop and then started dual booting with windows.downloaded ubuntu today and installed but just not feeling it. i have looked in add remove programs but its not there. can someone point me in the right direction. How do i remove ubuntu including the grub screen and free the space up on the hard disk because i'm missing 25gb.
View 4 Replies View RelatedI have now almost completed my aim of using Debian and PClinuxOS on different installed hard disks. For PCLOS I use an On-Disk set of disks which I have installed on a separate hard disk which serves as a repository from Synaptic, which makes program install/remove very quick. Is it possible to do the same thing with the 5 DVD's for Debian lenny on another hard disk?
View 2 Replies View RelatedI installed the live CD version of fedora (dual boot with vista) on my laptop. After I connected to the internet the updates downloaded and all went well. however when i restarted at the boot screen I found two instances of fedora such as
Fedora(2.6.27.9-159.fc10.i686)
Fedora(2.6.27.5-117.fc10.i686)
Other
The "other" is vista. I am wondering if this is OK or whether I have two fedora. If so i would like to remove one of them to save disk space.
It's my first experience with *nix OS. I needed server for following purposes:
Fileserver on samba
Internet gateway
VPN gateway
DNS
I installed ubuntu 10.04 server edition, but wasn't able to work without graphical environment. So I installed gnome. I installed and tweaked samba and bind9 and network manager and all works fine for now.
So I have a question. What will happen if I remove gnome? Especially with network manager? And what will I gain in performance. It's important because I have only an old Dell Optiplex 150 (933/512/10) serving as a server.
I am trying to build a storage server using software RAID. After getting writing RAID information to what I thought was the drives, I realized the configuration was not going to work. Since that time I have modified the RAID configuration more than once plus this is a project that was started a few months back. Between the time delays and currently written configuration, things are a confusing mess.
What I would like to do is wipe out all software RAID and start all over again. The problem is that I am unable to figure out how to get rid of it. I used DBAN to wipe out all four of my 1 TB drives which took a while. But still, the RAID configuration pulls up when I try to do a new install. Where is the RAID configuration data stored at if not on the HD? How can I scrub that information off so I can start all over again?
I need to remove an entry from my grub boot loader does anyone have a simple way to do this?
View 6 Replies View RelatedI have configured my Cisco ASa Firewall to send its logs to my ubuntu server in /var/log/cisco/ I see the logfiles populating in real time, but i can also see all the logs are also wtitten to /var/log/messages. How can i make sure i do not have a log redundancy? I dont want my firewall logs displayed in messages since there are now sent to /var/log/cisco.
View 1 Replies View Related1) Check if MySql is installed and running
2) How can I connect to create my db. (I want to do it from CLI not using an admin tool)
3) And if I have problems how can I make a clean uninstall/remove.
I have a weird problem here. I'm running ubuntu server 10.10 with Torrentflux. Today I added a torrent file that contained 3 dots in the filename, which was added to the queue, but nothing happend. After some searching on the web I discovered that TF has problems with torrents with 3 dots. After removing the dots, the torrent downloaded just fine.
For some reason now, I'm unable to remove the old torrent from the queue and it keeps showing as "new". Is there a file in which the queue is stored, so I can manualy remove the incorrect torrent-entry?
I have several copies of a file set with different organizational structures, but the same files. i.e.
On client1 files can be found in ~foobarfile1, ~foobarfile2, ~foo-avernfile3, ~foo avernfile4
On client2 files can be found in ~foo-barfile1, ~foo-barfile2, ~foo-tavernfile5, ~foo avernfile6
On client3 files can be found in ~file1, ~file3, ~file5, ~file7
I have access to one client and the server where I'd like all the files to be synced. I'm not worried about conflicts, just having a complete copy of all files[1-7]. Is there a way to cause RSYNC to remove the directory structure, so that I get something like:
client1% rsync files server:backup
client2% rsync files server:backup
etc
where at the destination all files will be checked against the destination set regardless of the source directory structure?
So i just installed ubuntu server 8.04. Got everything set up and started putting my files on it. 6 Hours of copying later I get a message saying that my Disk is full. This is a 1.5TB HD and it stopped copying at 269GB. fdisk shows the drive as 1.5TB, and ls -sh shows that only 269GB have been used. Yet I cannot add any more files. The other weird thing is that df doesn't show the hard drive, yet I know it is mounted and accessible. If it makes a difference I have it formatted to ext3.
View 2 Replies View RelatedI have both ubuntu and kde-desktop installed, and after trying KDM, switched back to GDM which worked fine for a while (although KDE changed my other gnome settings like usplash and cursors which took a while to change back). A day later, though, when I start up my system, the screen flickers a few times then shows me a message that an x-server is already running, so hit no to try loading it on '0' again or yes to try another number.
If I hit no, it will briefly show me the KDE login screen refresh a few times and go back to the menu. If I hit yes, it refreshes about 7 times and finally shows the gnome login screen. This process takes a long time and I'm not sure is great for my screen.
Seems like always if I add a package with apt-get, next time I use aptitude to update packages on a server, the packages I added with apt-get are automatically marked for removal.
I must, in aptitude, "forget new packages" and "cancel pending actions" then update the package list, remark packages needing updating, THEN aptitude has forgotten it wanted to remove packages.
Why can aptitude and apt-get NOT get along!?
Currently I have 10.04 on all servers, thus where it still is a problem.
I bought a disk to a friend that used it in a raid array, using the entire disk for the raid usage. To put that disk on service, i used dd-rescue to copy my old disk entirely, and managed to grow and setup a the partition table without losing any data. My last step was to create a RAID between my entire old disk, with a single partition and a partition of the same size on my new disk. I ran into some problems, but i manage to somehow fix it imperfectly, but now this setup is working properly. The problems (and imperfection) came from an issue it did not suspected : at some point, the original RAID superblock of the new disk, living in /dev/sda, resisted to dd-rescue, and so it is scanned by mdadm that tries, obviously unsuccessfully, to use it.
Partition layout :
Code:
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
this setup is working properly besides this raid5 declared on sda, so that is shows up here and there. Since it is using the same device name that my other, proper raid setup, i don't know how to deactivate it since mdadm uses the /dev/mdx name to identify arrays.
Every partition in my ubuntu machine starts with "320 GB Hard Disk" followed by partition name, Even If I renamed it. I want to remove this, can I ? Another question. Can I arrange those partitions by there locations in the physical hard drive? meaning that the first 30 GB in the disk appears with there names at first.
View 1 Replies View RelatedI have never had to do this before But I'm giving my laptop to my mother when my new one arrives and I need to remove the ubuntu installation and get the disk space back.
A few months ago the install stopped working. I can't remember what the error said... and tbh I can't be bothered to reboot twice to read it, but it has to be removed now anyways.
Had a look in windows to see if I can do anything in the disk manager, but it appears I can't. Oh wise ones, please, which path should one take?
When I run yum list fedora runs through around 5-10 repos that it can never connect to what's the best way to remove these repos? And which repos are the most reliable?
View 5 Replies View RelatedI would like to mount a disc that was previously used in the Intel Software Matrix RAID array (fake-raid). If I try to mount it I get:
mount: /dev/sdd1 already mounted or tempb busy
I think my dmraid is refusing to mount it beause of some RAID "flag". I would like to get rid of it, but unfortunately I cant do that on my system (theres no such RAID):
[root@ox mnt]# dmraid -r /dev/sdd
ERROR: isw: Could not find disk /dev/sdd in the metadata
no raid disks and with names: "/dev/sdd"
There are several posts recommending to uninstall dmraid completely from the system. Isnt there smarter solution in removing such a flag?