1. An external hard disk with VFAT32 file system has a continuous 23GB file (old HD disk image). It is too large to 'remove to wastebasket' and unlike MS Windows remove to wastebasket does not sense file size and wipe file index .
How to remove a large file in SUSE 11.2?
How does one split a large linux file and transfer to windows external drive ?
View 2 Replies View RelatedI need to remove a large binary file(PDF file) from a large log file which is generated daily.This is seriously hogging space on our servers.I need to remove the large PDF from the logs to make the logs smaller and manageable
I need to take out the texts (or binary file) between the strings
<my:PDF> and </my:PDF>
<applicationForm> and </applicationForm>
<image> and </image>
<extractedSignature> and </extractedSignature>
I am not sure whether sed utility can do this, these are large files and need to be pruned .I am not seeking logrotation advice just a script or command that can strip these large logs of texts between the characters above . I am not sure how to do this.These files are rather large.I am not sure how to achieve this with sed , tail, head , tr or any other facility .
Can't delete files from external hard disk.
Getting message,"Input output error or unreadable/corrupted file"
Is there any way to delete this?
This has happened several times now, with 9.10 and 10.04. I back up my photos periodically to external drives, using Nautilus. At the next attempted login Gnome won't start and sometimes gives power manager incorrect installation error.
First time this happened I was stumped and eventually did a clean install. Second time, I found advice elsewhere in this forum to solve this by emptying root trash, which did the trick. This time, however, root trash has nothing in it and 2 users trash were insignificant (I emptied them all anyway with rm -r). Tried looking for enormous directories but couldn't find a smoking gun. I would rather not end up doing another clean install - a painful and extreme solution. I'm continuing to look for solutions to the immediate problem, but my question really is, what causes this and how do I prevent it in the future? I've run Computer Janitor regularly and ran apt-get clean but no help. Should I do all my large scale copying from terminal? I'm not a total noob, but close.
I plan to reformat & reinstall my linux (centos).Before doing this, I got to backup my files into my USB external hard disk from Seagate (FreeAgent). The problem I faced is that I could not copy file into the hard disk even I was in root user. It prompted me that it is only read-only. I just wonder why.I have tested with my thumb drive. It worked. May I know why I could not copy file to the USB FreeAgent hard disk. Due to file system?
View 3 Replies View RelatedI've started having problems with large file downloads. A download will start and after a while freeze. The downloads window reports the correct connection speed and gives an estimated time to complete, but it stays frozen. Small downloads, torrents and surfing are not affected. I can do everything else normally even when the download is frozen. I've checked with my ISP and everything with my equipment checks out.
View 9 Replies View RelatedWhen accessing an NFS mount for a large (200MB+) file transfer, the transfer starts rapidly, then becomes slower and slower until it hangs. On several occasions, it has frozen the client machine. Both client and server are set to default to nfs version 3. Slowdown and hang also occur when connecting to FreeBSD NFS mounts.
Presumably (I hope), there is some sort of configuration for the client that needs to be set. what should be changed in the configuration? This worked out of the box in OpenSUSE 11.0.
Since I installed 11.1 and now 11.3 I haven't been abble to access my LaCie 500gb USB 2.0 external disk. So I asked LaCie support about it and they replied as follows:Windows 2k or SuSe Linux 11.0 can not see device in any USB 2.0 portsIs this a known problem and will it ever be fixed?
View 9 Replies View RelatedIm using it in an attempt to backup all of the files off of my dead Windows xp Computer. Right now I am using the 9.10 live disk of Ubuntu and cannot get the program to recognize what kind of file system my internal hard drive is using. (A western digital 320 GB hard drive with partition 1 in NTFS and part2 in FAT32) I would like to be able to back up this drive onto my 1 TB Western Digital external hard drive that is also in ntfs.
Now here comes the wierd part, it won't read or recognize my interal and external hard drives that run those file systems but it will recognize and allow me to read, edit, and access all of the ntfs hard drives on my home network. I did some lurking and tried a tutorial for creating a mount point and on how to force mount a disk, but neither of my disks would show up in Places/Computer. So then I checked the /etc/fstab file and is says,
aufs / aufs rw 0 0
tmpfs /tmp tmpfs nosuid,nodev 0 0
Which I think means that it says I have no hard drives installed or connected to the computer. Yet when I go into Disk Utility it tells me the disk is there and asks if I want to format the disk into ntfs...
Hardware: Toshiba Satellite L755Software: openSuse 11.4 with kernel 3.1.0-rc1-98-g72fa599-1-vanillaPeripherals: Logilink USB 3.0 to SATA HDD Adapter with Western Digital WD2500JSI installed the Vanilla kernel in the hope that USB 3.0 will work. But though some things really have been fixed (for instance, the notebook can resume from sleep mode), USB 3.0 still doesn't work.
Code:
lsusb
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
[code]...
I have a 250 GB external disk, where there was store a hundred and something GB of data. Pictures, music, documents and TV-shows. It was FAT32. In an attemt to make an live USB drive with openSUSE, I did exactly what I shoulden't do: I mistook the external disk for the the USB drive. Now the external disk has a 700 mb linux partition, while 232.2 GB is unpartitioned. TestDisk from CGSecurity is looking to see if there is a lost partition table there, somewhere. Is there anything I can do? There was no formating, so the data is still there (except for those 650 mb that was overwritten). Is there any way to rebuild the old partition?
Output from "fdisk -l":
Disk /dev/sdc: 250.1 GB, 250059350016 bytes
64 heads, 32 sectors/track, 238475 cylinders
Units = cylinders of 2048 * 512 = 1048576 bytes
[code]....
Anyone else seeing this? I do 'safely remove' to remove USB flash drive. disappears. Five seconds (or less) later, it reappears. The second time I do 'safely remove', it stays gone.
View 1 Replies View Relatedhow to transfer large files from my laptop to external hard drive. Problem occurs when I'm sending Blu-ray films (4.4GB) to external, gets to 4GB and then comes up with error. Is there any way of breaking it up and then merging when it reaches the hard drive or is there a way of sending it as one whole file.
View 1 Replies View RelatedI need to clone a laptop drive to a desktop drive. The laptop drive disk is 150 gb, however, only about 8 gb is used. Is it possible to clone this disk to a smaller drive?
View 3 Replies View RelatedI am trying to burn mac osx 10.5 install disk from from a 6.7gb dmg disk image. I thought I would be using 2 DVD-R 4.7GB discsfor this burn, I was hoping when the first was full it would ask for another to finish the burn. Instead it get the message that the DVD will not hold the choosen DMG. file.
Can I do anything besides buy a dual layer DVD that would hold the whole file?
What is the recommended method these days for command line partitioning and formatting for the Terabyte size hard disk.?
It was easy to keep up when your working or have access to hardware for re-purposing, but that has all dried up and my knowledge has been left behind. The problem(s) are with new, recent hardware
Following a crash from a now detectable faulty stick of RAMM, I've lost one of my data hard disks and my fiddling with replacement seems to leave various errors/warnings mainly about GPT not supported and this message is still present despite trying fdisk, cfdisk, gpart, gparted, and(?).
System is an ASUS mobo using SATA drives (root 500Gb: MBR+3 partitions;/, swap, /home), and two 2.4TB with single partitions.
So, my issues since upgrading to Jessie seem to compound. When I fix one issue, two more arise. Right now, I have a full system disk. How it got so full. So I started poking around. I ran
Code: Select all find / -type f -size +50M -exec ls -lh {} ; | awk '{ print $NF ": " $5 }'
Found a few files I could delete, and did, but I also found Code: Select all/var/log/syslog.1: 33G
/var/log/messages: 33G
/var/log/user.log: 33G
What I find strange is that they're all exactly 33G each. So that accounts for the missing 99GB I deleted them, however only recovered 27Gb. Whats weird is when I type df -h I get
Code: Select allFilesystem Size Used Avail Use% Mounted on
/dev/dm-0 106G 74G 27G 74% /
udev 10M 0 10M 0% /dev
tmpfs 3.2G 9.7M 3.2G 1% /run
tmpfs 7.9G 0 7.9G 0% /dev/shm
tmpfs 5.0M 4.0K 5.0M 1% /run/lock
tmpfs 7.9G 0 7.9G 0% /sys/fs/cgroup
/dev/sda1 228M 27M 189M 13% /boot
/dev/sdb1 1.9T 62G 1.8T 4% /media/ntfs
tmpfs 1.6G 0 1.6G 0% /run/user/0
What are the tmpfs's and how can I reclaim that space, and what is /dev/dm-0 and why is that taking up so much space?
I have 2 LVGs vgdisplay -v
Code: Select allroot@SETV-007-WOWZA:~# vgdisplay -v
DEGRADED MODE. Incomplete RAID LVs will be processed.
Finding all volume groups
Finding volume group "WOWZASERVER"
[Code] ....
After deleting the log files, I was able to regain access to my GDM session. But I still cant find out what /dev/dm-0 is, and where all the 75 GB is being taken up.
I just noticed, however, even though I can access the drive A-OK via browser, terminal, and web services (Our wowza) when I enter gParted I get this error for sda, my primary OS drive!
Code: Select all Libparted Bug Found!
Error informing the kernel about modifications to partition /dev/sda2 -- Invalid argument. This means Linux won't know about any changes you made to /dev/sda2 until you reboot -- so you shouldn't mount it or use it in any way before rebooting
Now that I'm in gParted I see 3 partitions: [URL] ....
It reports now, that I have used ALL of my disk space.
Post Log delete, and fresh reboot, this is what Code: Select alldf -h outputs
Code:
Select all Filesystem Size Used Avail Use% Mounted on
/dev/dm-0 106G 8.7G 92G 9% /
udev 10M 0 10M 0% /dev
tmpfs 3.2G 9.8M 3.2G 1% /run
tmpfs 7.9G 80K 7.9G 1% /dev/shm
tmpfs 5.0M 4.0K 5.0M 1% /run/lock
[Code] ....
What the heck is going on?
I am using RHEL 5.I have a very large test file which cannot be opened in vi.The content of the file has some 8000 lines.I need to view ten lines between 5680 to 5690.How can i view these particular lines in a large file.what is command and option i need to use.
View 1 Replies View RelatedI was copying an .avi file to an external hard drive and half way through the copy the drive reset and required remounting. Consequently I have an empty .avi file on the hard drive. I tried to recopy the file and overwrite, but I keep getting 'Could not write to media/harddrive/filename.avi'. I tried to rename to file to be copied but got the same response, I cannot delete the empty file either, as I get an error telling I cannot delete it. I have tried to do this as the user and root with the same result.Any other file I tried to copy onto the external hard drive is fine, just this one zero length file and the file I was trying to copy, the original of the file. I also tried to delete the file on another computer but couldn'tExternal hard drive is a WD elements ntfs, which works great except for this glitch.
View 3 Replies View RelatedI had an extension i started making and had loaded in Chromium. Well i forgot to unload it and deleted the files for it. Well now Chromium crashes on startup saying it can't find the manifest file for it. How can i remove the entry for that in the extension cookies file?
View 9 Replies View Relatedhow do I remove a double file like " New File" look through everything I own no explantion.
View 3 Replies View RelatedIs it possible to remove multiple packages listed in a text file? Similar to "cat orphan.txt | zypper rm" or "zypper rm <orphan.txt." Neither worked.
View 8 Replies View RelatedI had a dual boot (windows 7 + debian), both of them installed in my internal hard disk, with the GRUB in it. I have recently installed a second linux distro (mint), but I put it in an external hard disk. Now the GRUB allows me to boot any of the three operating systems, but I need the external disk to do it. It seems that after the mint installation the GRUB is now working from the external disk (if the external disk is not connected, the machine does not boot.) �Is there a way to change the location of the GRUB, to the internal hard disk of my laptop?
View 2 Replies View RelatedI plugged in my external dvd-r (asus) via usb. It showed me some message on shell, that it has detected the cdrom(although its dvd rom as well but nevermind) and its of ASUS. But how do i know which dev it was associated with in /dev/? Since i had to test something, i plugged it out, and save the output of ls /dev/ > ~/result.txt
after plugging the dvd-rom, i compared the results and was able to find that it was associated with simple cdrom i.e. /dev/cdrom. I wanted to know that is there any command that will tell me which /dev/ file was associated with external dvdrom? i tried to see in the following result
1) df -h ( no results, just the already mounted partitions)
2) fdisk -l ( same as above)
3) dmesg | tail (shown almost the same result as was shown on shell at the time of plugging the dvd)
It started when I wanted to dual boot Windows 7 and Opensuse off of my netbook (No DVD/CD drive) I tried install suse from an external hard drive and I botched it. I ended up erasing EVERYTHING off of my internal netbook hard drive. Windows and all.
Well, I had a couple of other computers so I studied up and eventually successfully installed OpenSUSE 11.2 on my external hard drive (11.3 being the one that I accidentally erased everything with, so kinda scared of it) and now I want to install openSUSE 11.2 on my internal netbook hard drive.
I can not use disks
I can not use a flash drive (For some reason, even if I make it bootable, it will not load up, this could be because it's actually a 8GB microSD card that is placed in a USB card reader.)
I can not use an external hard drive because that's what I'm running suse off of.
I've tried reading up on how to install suse on another drive off of the hard drive and I've gotten as far as whenever I boot up the netbook with the suse external hard drive connected it will ask to boot into OpenSUSE, the Fail Safe, or to install OpenSuse. When I select to install it it gives me the Error 18 Unknown File system.
I've tried formatting the internal hard drive twice. One as NTFS and again as EXT4. Neither seems to effect it other than when it's ext4 I can open it and it contains a Lost and Found folder.
When I interrupt the boot sequence by pressing c and going to the terminal and I use the root (hd +TAB command it tells me I have a hd0 and a hd1. The hd1 only has 1 partition which is ext4, which I'm assuming hd1 is the internal hard drive (I'm not sure how to check) and the hd0 is the external hard drive, which has three partitions. One with an unknown file system and two with ext4. When I try to enter the set up from the terminal it gives me the same error for any thing I put it (e.g. root (hd0,0) gives the same error as root (hd0,1), or root (hd0,2) and root (hd1,0)
Something like it cannot locate these two files I'm assuming it needs to boot. If anyone finds this relevant I'll retry it and post the files its missing.
I've been searching for awhile and can't find any threads that can solve my problem. From other threads, however, I have noticed that I should probably include my menu.lst, listed below
Code:
I have also ran the boot info script and received the RESULTS.txt file it generates. Listed below
Code:
I have tried to plan my backup plans. As I want it simple I am gonna use only tar.gz combination of some files that are important. My question then is the following:
-I have a 100GB hard disk with 20Gb free space only. I would like to backup the rest 80Gb to an external hard disk. I run my scripts which end up saving a 75Gb(due to compression) to my external hard disk.
-->Then comes the times to try to see the contents of my archive (just to make sure that I can recover what is inside the 75GB disk file). Do you know if tar.gz needs to decompress the 75Gb file in some /tmp space in my hard disk for showing me the contents inside it? In that case it will not be easy at all to ever look at what is inside it in my hard disk, as there is no 80Gb of free space in my hard disk (20gb only).
I have seen this 3 times now - it's an updated Lucid with EXT4, trying to copy to a 500G USB drive?
View 3 Replies View RelatedI recently upgraded my file/media server to Fedora 11. After doing so, I can no longer copy large files to the server. The files begin to transfer, but typically after about 1gb of the file has transferred, the transfer stalls and ultimately fails with the message:
"Error writing to file: Input/output error"
I've run out of ideas as to what could cause this problem. I have tried the following:
1. Different NFS versions: NFS3 and NFS4
2. Tried copying the files to different physical drives on the server.
3. Tried copying the files from different physical drives on the client.
4. Tried different rsize and wsize block sizes when mounting the NFS share
5. Tried copying the files via a different protocol. SSH in this case. The file transfers are always successful when I use SSH.
Regardless of what I do, the result is the same. The file transfers always fail after approximately 1gb.
Some other notes.
1. Both the client and the server are running Fedora 11 kernel 2.6.29.5-191.fc11.x86_64
I am out of ideas. Has anyone else experienced something similar?
I want to transfer a huge file (60GB) over the NFS network on linux. Is cp the best option?
View 1 Replies View Related