Im trying to install ubuntu server 9.10 64 bit on VM Ware ESXi unfortunately im not getting very far - as i get the following message :- This kernel requires an x86-64 CPU, but has detected an i686 CPU. Unable to boot - Please use a kernal suitable for your CPU. Where can i find a vmware ESXi compatible UBUNTU SERVER installer
View 2 RepliesI want to install a VM ware server (Open Source )like VM ESXi 4 Which are Open Source VM servers available?
View 3 Replies View RelatedI can't install centos 5 on vmware esxi 4 server.I use the netinstall cdrom and I get the splash screen with the kernel menu.After this, I can choose a language but then I get this error: "The CentOS CD was not found in any of your CDROM drives. Please insert the CentOS CD and press OK to retry."
I have tried it with the image on the datastore, a unc-path and as physical cdrom.I have tested all modes in the vmware cdrom settings (passthrogh IDE or Emulate IDE) - nothing helps.
Console 3 shows me:
loaded mptbase from /modules/modules.cgz
loaded mptscsihfrom /modules/modules.cgz[code]...........
I have this 7.10 Ubuntu server that I'm trying to move inside a VM on my ESXi server. I use the VMware Conversion tool and everythings goes well until I try to boot it from inside the VM, the network isn't detected. Now I understand that the drivers may not be working, I'm not an expert here. Also, since this is a 7.10 install I don't have access to the Gutsy repositories anymore.
View 3 Replies View RelatedI have ESXI 4.1 installed with Unbuntu Server 11.04, Gnome.I have 8 SATA drives installed they show up in unbuntu as removable media.I wish to share them to my windows users on my lan using.The problem is it will not allow me to change the permissions for the shares and as such when my windows clients try to access the shares they are told asscess denied.Samba will share folders created on my desktop ok, I have tryed sharing a folder in the draws but it still did not work.
View 4 Replies View Relateddifferences between Ubuntu Cloud and other virtualisation systems such as VMWare ESXi, and why one would be used in preference to another?
View 7 Replies View RelatedI have a freshly installed, updated Fedora 11 installation for which the VMWare Tools fails. It can't compile what it needs, either. It's running under ESXi 3.x.
View 2 Replies View RelatedI've installed VM Ware Server, but I'm facing the following problem:
# /usr/bin/vmware-config.pl Making sure services for VMware Server are stopped.
Stopping VMware autostart virtual machines:
Virtual machines [FAILED]
Stopping VMware management services:
VMware Virtual Infrastructure Web Access
VMware Server Host Agent [FAILED]
Stopping VMware services:
VMware Authentication Daemon [ OK ]
Virtual machine monitor [ OK ]
None of the pre-built vmmon modules for VMware Server is suitable for your running kernel. Do you want this program to try to build the vmmon module for your system (you need to have a C compiler installed on your system)? [no] y Using compiler "/usr/bin/gcc". Use environment variable CC to override.
What is the location of the directory of C header files that match your running kernel? [/usr/src/linux/include] /usr/include The header files in /usr/include are generally for C libraries, not for the running kernel. If you do not have kernel header files in your /usr/src directory, you probably do not have the kernel-source package installed. Are you sure that /usr/include contains the header files associated with your running kernel? [no] y
The directory of kernel headers (version @@VMWARE@@ UTS_RELEASE) does not match your running kernel (version 2.6.35.6-45.fc14.x86_64). Even if the module were to compile successfully, it would not load into the running kernel. What is the location of the directory of C header files that match your running But I have all the necessary files installed!!
[Code]........
I installed a ubuntu server edition on a VMware workstation. The problem is , when I added a network adapter (so, total 2 adapters now), the second one was not being shown in ifconfig. On trying ifconfig eth1, I found that the 2nd adapter didn't have an ip address. So, I installed ubuntu desktop edition on another VM, and this time it showed both the network adapters on doing ifconfig, and both had ip addresses. Why doesn't this work with ubuntu server?
View 1 Replies View RelatedMy boss asked me to convert the company's web server (running on ubuntu 10.04 server LTS and using CMSME for the website),and the company's router directs the domain to that machine.The webserver is getting old (P3) and the server just freeze every morning and require a manual reboot most mornings.
He wants me to convert the ubuntu server to a virtual machine and host it on a ESXi server. For the past few week (im working part-time so not everyday), trying different ways to host the webserver.I tried using the VMware Converter 4.0 to the ESXi server (That didn't work)I tried using Acronis Echo workstation to create a image and trying to convert it using the VMware converter (The ESXi console says Error Operating System)
Im running Ubuntu and wants to install Windows 7 on my VM ware. how do i know if i have 32 or 64 bit?
View 2 Replies View RelatedI tried to install Ubuntu Server 10.04 AMD64 onto my Dell blade server running ESXi 4. I get the following error when i try to install:
Code:
My server have 2 Intel Xeon Quad core CPU's installed.
I have allocated 2 virtual CPU's to the VM. My VM is also set to Linux 64bit.
So a while back I was able to mount a directory from my OpenSuse server as a NFS on an Esxi server. After restarting the Esxi server, the NFS became inactive and I was unable to remount it. The error given was that the Esxi client was unable to connect to the Suse server. I was looking into the showmount -a command on the Suse server and it showed the mount point on the Esxi server. Could this be causing the Suse server to reject new attempts to mount the directory? What else can I try to fix this problem? Also I should note that both servers can ping each other.
View 2 Replies View RelatedI want to install Fedora on a VM Ware which runs on my Windows Laptop. My VM Ware version is 5.5. Which fedora version I can go for ?
View 2 Replies View RelatedI want to install Linux on a virtual machine (VMWare ESXi). My PC runs W7 64-bit. Can I install the new 32-bit Fedora Linux in a VM environment?
View 10 Replies View RelatedI've been trying to get a copy of VM Ware Server installed on my Ubuntu machine. I tried the Version 2 with the patch available but seeing as I couldn't access the management console due to Firefox I had to abandon that idea. out with installing Version 1.10?
[Code]...
i have a small home network. i have laptops and workstations that my family (public) uses and an esxi box (private) that i use to test new apps for work.i need to have the public network separate from private. I have tried using two linksys routers but was unable to get the private network to access the internet. i was thinking i could use iptables with a couple of nics but I am not sure it would work. I know this could be a lot of work for someone that has never used iptables before but will give me a reason to learn it.i am sure setting up a public and private network has been done before i just don't to buy a bunch of hardware. I have a extra workstation and a bunch of nics so i would like to go that route. I am open to suggestions.
View 2 Replies View RelatedI want to install a DLNA server on my ubuntu home server. It will primarily be used for photo browsing on my PS3, but general media support would be nice. (I use Squeezebox server for music.) What are my options, and what are the main difference between them.
View 9 Replies View RelatedSo, I have an iso that I want to mount. Okay so I get gmount-iso and mount it to /mnt/. Sounds good.
But in vmware I'm trying to point to that so I copy and paste the location. But it says "Insert the installer disc into this drive to continue."
run VMWare ESXi and have installed Ubuntu 10.10 in a virtual machine.People say you press CRTL+ALT+F1 to exit back to command line from the gnome login screen but this never works for me.If I do something like "sudo service gdm stop" it just delivers me to the desktop background almost like the machine has hung, no menus toolbars, mouse or anything.Basically what I want to be able to do is start up the machine with command line, and go into gnome on occasion and exit back out to command line to save resources, this is because the machine will mainly serve as a web server. I followed the guide here [URL] which tells how to make ubuntu always start at CLI, which works nicely, but I need a way to be able to get back to CLI from inside gnome.
View 3 Replies View RelatedWe are having some problems in running CentOS 5.3 in our ESXi 3.5 environment. The virtual machine is running perfectly under VMWare Player, but when I converted it to ESXi using VMWare vCenter Converter 4.0.0, the CentOS often goes into a panic right at the start of stops when setting up the hostname.
View 1 Replies View RelatedI'm trying to install Alternative PHP Cache on my web server and am running into an error with pecl.
Code:
checking whether apc needs to get compiler flags from apxs...I was not able to successfully run APXS. Possible reasons:
1. Perl is not installed;
2. Apache was not compiled with DSO support (--enable-module=so);
3. 'apxs' is not in your path. Try to use --with-apxs=/path/to/apxs
The output of /var/tmp/pear-build-root/APC-3.0.19/y follows
/tmp/pear/temp/APC/configure: line 4113: /var/tmp/pear-build-root/APC-3.0.19/y: No such file or directory
configure: error: Aborting
[code]....
I'm new to Ubuntu, and i have a simple question.
I just want to know if there's an option to install VNC Server or something like that
on Ubuntu 10.04 so i can use it's GUI interface? Or it's not possible.
I have only SSH access that i got from the company i bought the server.
I am trying to figure out if there is an edition of VM-WARE that will work on Fedora 12? I just installed Fedora on my laptop and would like to have VM-WARE player so I can have Windows running also. I have done the reverse - running VM-WARE on Windows and Fedora as a VM, now I want to have Fedora be the host and Windows as a guest.
View 2 Replies View RelatedThis is the first time I participate with you. So, I have a problem in configuration CentOS 5.5 on VM ware Machine 6.5, once I downloaded the ''CentOS-5.5-i386-bin-DVD.iso'' which is about 3.4 GB, it did not work on the VM ware and I get s black board, which means it doesn't work properly. Should I take a disk image by using an empty disk? if so, how can I take this image. I'm so sorry guys, because I do not have a sufficient experience in networking which makes me in a real predicament. by the way, I'm gonna use the ''RedHat Linux Enterprise 5'' in my work.
View 1 Replies View Relatediam trying to map novell net ware volumes in redhat EL-4
View 2 Replies View RelatedThe following recipient(s) cannot be reached:
Im using slack ware 10.2 for may mail server.
Recently i install slack ware 13.1 KDE into my laptop.Before that i used Ubuntu genome as my Os.
I am using my mobile broadband dongle to connect Internet.In the Ubuntu gnome, network manager applet appear and with that i can easily connect to Internet.
But in the slack ware KDE i couldnt find any way to connect my dongle.
I have had problems getting Fedora 12 installed on esxi. I have 20gb of hd space and 2gb of ram. Everytime I try to load Fedora, it freezes during the install. I don't know if maybe I'm downloading bad torrents or what. Has anyone ever ran across this issue? Is there a different source I should be downloading from?
View 1 Replies View RelatedI have installed VMWare Player on my windows XP and installed Ubuntu. On Ubuntu virtual machine I see Network Drives folder but I do not see any netwrok drives I have on my windows. Any suggestions for what should I do to be able to access Network drives in Ubuntu as well.
View 1 Replies View Related