I have created a folder in my /var/www/ as /var/www/borneo and when I try to install a smf forum I get this error: 550 Failed to change directory. I have installed vsftpd for the ftp.
View 5 RepliesWhen I try to login as a user, I get the dreaded "500 OOPS: cannot change directory:". Almost every posting I can find related to this problem was due to SELinux being enabled. My SELinux is operating in permissive mode. So why can't it open the home directory when I log in as the tarheelnk user?
Code:
[root@server1 home]# ls /home/ -l
total 36
-rw------- 1 root apache 7168 2009-09-11 16:24 aquota.group
-rw------- 1 root apache 7168 2009-09-11 16:30 aquota.user
drwx------ 2 root root 16384 2009-09-11 10:07 lost+found
drwsrws--- 4 tarheelnk apache 4096 2009-09-11 14:58 tarheelnk
code....
Here is my vsftpd.conf file:
# Example config file /etc/vsftpd.conf
#
# The default compiled in settings are fairly paranoid. This sample file
# loosens things up a bit, to make the ftp daemon more usable.
[Code]....
My directory structure is
/3dmodels/work/work
While I am changing to last work directory it's giving th error as:
550 Failed to change directory.
I have tried selinux issues,permission issues, anon issues,chroot issues but no solution.
Is there anything to do more than these issue ?
I am logging in as localuser. I can browse all the contents of 2nd work directory except the last work directory.
But in internet browser all works well,I can change into the last work directory and can also browse the directory but unable in command line.
i am trying to install symantec endpoint on a linux server by this command rpm -ivh sav-1.0.3-8.i386.rpm but it gives me the following error error: unpacking of archive failed on file /opt/Symantec/bin/navdefutil;4ceb8d6b: cpio: mkdir failed - No such file or directory
View 3 Replies View RelatedI'm running Ubuntu 9.10 with Kvm. I've used a howto to configure my network. Seems to work fine, I've installed the Virtual Machine manager, when I go to create my Virtual Machine, I see the the image is automatically created in /var/lib/libvirt/images. I have a totally separate path for my images. How to I configure a different image directory
View 1 Replies View Relatedi'm having issues with a folder which I cannot write to or seem to do anything else with? i figured i'd delete it and start again but i can't even do that!!
Code:
server@server:~$ sudo chown server /media/server/swap/downloads/incomplete/
chown: changing ownership of `/media/server/swap/downloads/incomplete/': Operation not permitted
[Code]....
I have recently experienced a problem that occurred after an automatic update. After the update it said restart system. So I did and proceeded as normal. when after the reboot Firefox suddenly stopped working, crashed and upon clicking it again only a blank box appeared. Then my other apps followed and i soon couldn't do anything so i shut down my computer. Upon restart I got a black screen with tons of text and something around the lines of
mount: mounting /dev on /root/dev failed: No such file or directory
mount: mounting / sys/ on root/sys failed: No such file or directory
mount: mounting /proc on /root/proc failed: No such file or dirctory
[code]....
So I rebooted and pressed shift to open that grub thing and booted from an earlier kernel. This time it said checking HD for errors and after booted normally. Everything seemed fine but next day it did it again. Starting with Firefox crashing and then everything else. I again booted from a previous kernel and it worked but upon checking with uname -a it did not list the kernel i chose to boot from. So I decided to upgrade 10.04 to 10.10. This upgraded my kernel and deleted the old ones so i am hoping i am good now.
Running NFS on Fedora 10. Exports fine. I tested it locally. I tested the NFS configuration by trying to access the exported directory from my local machine, before testing it from a remote machine. While logged in as root, I created a new directory "/mnt/nfstest".
Then I mounted the NFS share at the new directory I created:
[root@eric root]# mount -t nfs localhost:/mnt/nfs /mnt/nfstest
When I tried to mount on the remote client:
[root@frank root]# mount -t nfs eric:/mnt/nfs /mnt/nfstest
After a while I got:
# mount eric:/mnt/nfs /mnt/nfstest
mount.nfs: mount system call failed
I tried strace but wasn't sure what I was looking for, but I've attached the results as a .odt file.
when ever i give yum update am geting this error. failed to use search generator: failure:repodata/318b9912817ec3309c6defc47d79e878c52a21fd1457d191bb ff060fdb7f7f8d-primary.sqlite.bz2 from rpmfusion-free-updates: [Errno 256] No more mirrors to try. I was trying to install tomcat using yum. Is there any way i can install tomcat other than yum utility. I downloaded he zip folder for tomcat which i downloaded from apace tomcat site.
View 2 Replies View RelatedI have newly installed Ubuntu server 9.10 in my server machine.And it has tomcat6 in itself.My friend have built a Java software in Fedora ,and he wants to move it to the new server.But problem is the directory structure is different between two systems.He has to either change his directory setting in his software or change the default tomcat6 ROOT directory. But I have not find any configuration file can do this job(change the tomcat default ROOT directory ).
View 3 Replies View Relatedwhen I try to access [URL]... I get an exception:
[code]...
I believe I need to change some directory permissions, but I can't determine exactly what.
I just installed LAMP on ubuntu 10.04using this method:ow i want to change the directory where my websites are; default is "/var/www" right. I have a partition using NTSF file system where i have a folder with all my websites. Can i configure LAMP to use this folder?
View 9 Replies View RelatedI'm trying to build a cups server (with cups-pdf) and it's not printing (creating) the PDF output. from cups-pdf log:
Code:
[ERROR] failed to create directory (/home/testuser/PDF)
[ERROR] failed to create user output directory (/home/testuser/PDF)
the lp command is being ran from SSH as "testuser", who is in the lpadmin group (as well as sysadmin, users, and about 5 other groups while troubleshooting this) I've tried creating the PDF folder as both the user, and as root but still no output file (when the folder is created the first error goes away, but the user output error remains) *note, the /home directory is a symbolic link to a separate partion (/storage) I'm still a bit green on linux, but the server is headless, and for now i'm just trying to get normal users able to print using cups-pdf
here's my cupsd.conf
Code:
#
#
# Sample configuration file for the CUPS scheduler. See "man cupsd.conf" for a
# complete description of this file.
[code]....
I can not use nfs from F10 client to F12 server. nfs mount on F10 to F12 times out anf nfs4 mount gives "mount.nfs4: mounting localhost:/home failed, reason given by server: No such file or directory" I have tried to close firewall and set selinux to permissive mode on both client and server with same result. Samba works fine. On server [root@flokipal ~]# mount -t nfs4 localhost:/home /media/tonlist mount.nfs4: mounting localhost:/home failed, reason given by server: No such file or directory
but
[root@flokipal ~]# mount -t nfs localhost:/home /media/tonlist
[root@flokipal ~]#
works
I would like to change the permissions for a directory and all files inside the directory how do I do this? The website is located only on my local network so I am not worried about security. Also what would be the optimal permissions for running wordpress.
View 1 Replies View RelatedI use dual boot with windos 7. i use xampp in win7. want to use lampp for ubuntu 10.04. i want to use one local server directoy for both . i successfuly changed htdocs location in lampp. but could not change mysql data directory location.
View 4 Replies View RelatedOkay, so on occasion when I boot into ubuntu I get this error
[mount: mounting /dev /root/dev failed: no such file or directory]
[mount: mounting /dev /root/sys failed: no such file or directory]
[mount: mounting /dev /root/proc failed: no such file or directory]
[code]...
I get the error when I open any of the kernel versions or any recovery mode. Ubuntu 10.10 Desktop is the only OS installed on the computer, which is a Lenovo S10-3. I can eventually get it to go away, sometimes by repeatedly unplugging it and plugging it back in, and sometimes I will boot into GParted, do nothing, then restart and it will work.I have found some solutions online, but all of them involve the error happening as a result of dual booting with Windows.I have made no major system changes recently, so I can't see anything like that being the problem.
I've got a raid5 array of 4 disks with ubuntu 8.04 runing on it that is currently still working:
/dev/sda
/dev/sdb
/dev/sdc
/dev/sdd
Smartmontools for /dev/sdc tell that there are 9 sectors pending for reallocation:
Code:
197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 9
198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 9
And /dev/sdd has increasing number of reallocated sectors (about 1 every couple of minutes):
Code:
5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 1735
/dev/sdc has failed a coulple of times this week (but I have always sucessfully readded it to raid5) . But the increasing number of reallocated sectores on /dev/sdd concerns me even more.
I'm affraid that during removal of /dev/sdd and adding new /devs/sdd disk, raid might fall appart. That's why I would try to do it in Ubuntu Live CD:If the raid falls appart (/dev/sdc fails) during the readding of new /dev/sdd disk, I might still remove the new /dev/sdd and return the previous one and assemble the raid with:
/dev/sda
/dev/sdb
/dev/sdd (old one that was previously removed)
Does assembling Raid in Ubuntu Live and adding new disk for /dev/sdd write anything on /dev/sda, /dev/sdb and /dev/sdc in the process of adding /dev/sdd into raid5?
rcon@li121-251:~/b3$ ./b3_run.py
: No such file or directory
rcon@li121-251:~/b3$ l;
[Code].....
as you can see up top it gives me an error when i try to run the file. it is a Ubuntu error and i don't what the heck is causing it. had it before but don't remember how i resolved it.
I'm installing and configuring my first server using RackSpace CloudServers running Ubuntu Karmic Koala (9.10) and I'm now installing iRedMail. The installation runs successfully until I recieve this error:
Code:
The following packages have unmet dependencies: mysql-server-5.0: Depends: mysql-server-core-5.0 (>= 5.1.30really5.0.83-0ubuntu3) but it is not going to be installed
E: Broken packages < ERROR > Installation failed, please check the terminal output. I understand this is telling me there is some software that iRedMail (or something iRedMail is dependant upon) that needs installed. Is this correct? And if so, what is i needing installed and how do I do that (aptitude install example-package?)?
I have presently a (working) boot dedicated partition, where grub stuff resides, but I want to change it to a common "/boot" folder in the root partition (in a different hdd). For some reason I can't do it. The first thing I did was to copy all the things that are in the boot partition to a boot folder on the root partition. After that, I tried: grub-install /dev/hdc1 (which is odd but it's where the root partition actually is)
When I did it from the linux I have installed on my hdd, it actually did something, I don't remember all the output (except that there was something about it not being able to access hda, which is oddly the dvdrom), but it didn't work. From a live CD, the same command (grub-install /dev/hdc1) is answered with: Could not find device for /boot: Not found or not a block device. From grub's own prompt, the things are more or less the same. First of all, it does not find stage1, even though I did copy the content from the boot partition to a boot folder in the root partition.
I tried to proceed, anyway, with root (hd1,0) and setup (hd1,0) (which is /dev/hdc1, according with the "geometry" info given by grub). "Root" is accepted, but "setup" is answered with: Checking if "/boot/grub/stage1" exists... no Checking if "/grub/stage1" exists... no Error 2: Bad file or directory type But the files are there. I can't "cat" the menu.lst from grub though, unlike with the actual working boot partition. The same error message. From the terminal, however, it's all there. I tried with /dev/hdc1 both mounted and unmounted, the same message. So, basically I have two questions, I guess:
1 - can I really do this sort of thing running a linux installed on a hdd, rather than a live cd, or is the live cd preferable for some reason?
2 - what am I missing?
(A note that may worth making is that I'm using the soon-to-be deprecated grub version, 0.9 or something, not grub2. I think it shouldn't be a problem since I've installed the system with the old version to begin with, but that may be irrelevant, I don't really know)
figure out this error?
Code:
kradalby@hpcompaq6530b-laptop ~/.ssh $ ssh -vvv -p 110 kradalby@dfekt.no
OpenSSH_5.5p1 Debian-5+b1, OpenSSL 0.9.8o 01 Jun 2010
[code]....
I am trying to create a jailed shell for a user Don($UID '500') using my own method(I don't want to use any ready-made "jailkit"). The user don should get a home directory /jail/don instead of /home/don when he login via SSH (So that he will not able to see any other files/directories on the system)
This is what I have done.
Quote:
Code:
It works without any issue ....Home directory changes to /jail/don when I ssh to the system as user don. ie: #ssh don@192.168.0.66
Then I added a chroot command to this code.
Code:
Unfortunately , now I am getting an error message saying that "chroot: cannot change root directory to /jail: Operation not permitted" .. I am not sure how to rectify this error... Is my approach correct to get a jailed shell using /etc/profile file ?
When the RPM runs it come up with this error. How do I install the required dependencies? I have added more repositories, but still there are a few dependencies missing. Is there a zypper/sudo -get or something available? Opensuse 11.1 Gnome
[code]...
There is like one month since dig fails running after some upgrade. Platform: Ubuntu-Server 6.06.1 _Dapper Drake_ - Release amd64 Error: Code: dig: error while loading shared libraries: libdns.so.21: cannot open shared object file: No such file or directory.
View 2 Replies View RelatedWe are running into issues with a File Upload script written in PHP. We can upload files without issues except with .*x files (such as .docx) We are getting permission denied errors. The error occurs when we use move upload file, to the new directory within our PHP app. If we give the uploads folder 777 access, it works fine without error. I dont like that. So I set it to 775 (Also dont like this), but it didnt work until I gave group ownership to www-data (I really dont like this)
This issue only happens on our production server, which is Ubuntu 9.04, running Apache2.2 and PHP5 will all the newest updates. We also have all MIME's configured, and are able to download the file from Apache without error. The first thing we noticed before the file permissions error, was that the MIME type changed to .zip when we used mime content type function. But yet using the FILES array, it still showed .docx.
I am using ubuntu server 10.10. Tried to create a cronjob for logwatch/sendmail, but without sucess.
I followed the instructions : URL
When I type :
Quote:
sudo grep CRON /var/log/syslog
I get the result :
CRON[27611]: (CRON) error (grandchild #27612 failed with exit status 127)
I'm trying to install squirrel mail in Fedora 10 server: I'm following this tutorial: [URL]. I'm at sudo rpm -ivh courier-imap-4.4.1.20080920-1.10.i386.rpm
When I run the command I get:
error: Failed dependencies:
/usr/local/bin/perl is needed by courier-imap-4.4.1.20080920-1.10.i386
I found this page [URL] which actually describes the error and gives a "solution" however it doesn't seem to solve my problem
error: Failed dependencies:
/usr/local/bin/perl is needed by courier-imap-4.1.1-1.4.i386
Solution: export PATH=/bin:/usr/bin
I recently set up a LDAP server, and have a server using it to authenticate users.
That works completely, but when a user tries to use passwd to change his password this happens.
Code:
And this is in /var/log/auth.log
Code: