I am using ubuntu server 10.10. Tried to create a cronjob for logwatch/sendmail, but without sucess.
I followed the instructions : URL
When I type :
Quote:
sudo grep CRON /var/log/syslog
I get the result :
CRON[27611]: (CRON) error (grandchild #27612 failed with exit status 127)
I have a desktop environment with Apache2.(If someone asks why desktop to run Apache2, its because the desktop must display a local website)When I update the html files from a windows box it is being copied in a home/user folder.Cron now has to copy the files with r to the localhost area.sudo cp -R home/myself/Downloads/* /var/www/ works fine:The script containing just that one line is in a file in my /home/myself/Documents folder named: copy_site_localhost.Cron entry in turn was created with the command: sudo crontab -e and the entry is:*/10 * * * * /home/myself/Documents/copy_site_localhostThe error in the syslog file in /var/logs is as follows:
.......CRON[1234] (root) CMD (home/myself/Documents?copy_site_localhost)
.......CRON[1236] error (grandchild #1234 failed with exit status126)
.......CRON{1236] info (No MTA installed, disregarding output)
[code]....
My system has stopped to boot at all...
Code: Select alldone.
Setting parameters of disc: (none).
Setting preliminary keymap...done.
Activating swap...done.
Checking root file system...fsck from util-linux-ng 2.17.2
[Code] ....
An automatic file system check (fsck) of the root filesystem failed. A manual fsck must be performed, then the system restarted. The fsck should be performed in maintenance mode with the root filesystem mounted in read-only mode. ... failed!
The root filesystem is currently mounted in read-only mode. A maintenance shell will now be started. After performing system maintenance, press CONTROL-D to terminate the maintenance shell and restart the system. ... (warning).
Give root password for maintenance
(or type Control-D to continue): _
For now, I just don't know what I should to do next to my system has started to work again...
I'm attempting to apply the quota patch to postfix 2.5.1. I have done the following..
Code:
cd /usr/src/
apt-get source postfix
wget http://vda.sourceforge.net/VDA/postf...da-ng.patch.gz{code]....
dpkg-buildpackage: failure: tail of debian/changelog gave error exit status 1
I have searched hi and low and still can't work out how to resolve this.
I was installing SMPLAYER when the power failed...now i get this error message when trying to re-install the packages..
E: liblzo2-2: subprocess installed post-installation script returned error exit status 2
E: mplayer-nogui: dependency problems - leaving unconfigured
E: mplayer: dependency problems - leaving unconfigured
[code]....
I can't get any updates for my system and keep getting the errors shown below, and suggestions peeps?
E: linux-image-2.6.28-11-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-13-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-14-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-15-generic: subprocess installed post-removal script returned error exit status 1
E: linux-image-2.6.28-19-generic: subprocess installed post-removal script returned error exit status 1
I dont know how to put this that somobody would understand my problem but here we go. I have problem like said in title.I am unable to upgrade my kernel. Sunaptics says that I have 2.6.35-28 installed. I tried to reinstall 2.6.35-28 via synaptics but it gives me error.
Thats what uname -a says:
pekka@pekka-laptop:~$ uname -a
Linux pekka-laptop 2.6.35-25-generic #44-Ubuntu SMP Fri Jan 21 17:40:48 UTC 2011 i686 GNU/Linux
Tried to install 2.6.35-27 via terminal thats what I get:
Code:
pekka@pekka-laptop:~$ sudo apt-get install linux-image-2.6.35-27
[sudo] password for pekka:
Reading package lists... Done
Building dependency tree
code....
dpkg: error processing linux-image-2.6.35-25-generic (--remove):
subprocess installed post-removal script returned error exit status 1
Errors were encountered while processing:
linux-image-2.6.35-25-generic
E: Sub-process /usr/bin/dpkg returned an error code (1)
pekka@pekka-laptop:
I'm running Ubuntu 9.10 Karmic and XBMC Live.I get error messages which seem to relate to openvpn.So I tried to remove it with the remove command. This is what I getQuote:
@XBMCLive:/home$ sudo apt-get remove openvpn
Reading package lists... Done
Building dependency tree
[code]....
"E: backuppc: subprocess installed post-installation script returned error exit status 1"whenever I upgrade my system I get the above message Anyone know how to fix it? or if it's anything important ?
View 1 Replies View Relatedit's a hot day and nothing seems to be going right. Trying to figure a way out of this one - error 127. Looks like it could be Metacity problem? There a couple of pythons that also have a problem.
Code:
(Reading database ... 145089 files and directories currently installed.)
Preparing to replace metacity-common 1:2.28.0-0ubuntu1 (using .../metacity-
[code]....
I have been having the worst time trying to get sametime messenger from IBM to install properly. I had it working fine for the last 6 months and yesterday I accidently updated and it all went to {1134}. I seem to have found dkms to be the source of the problem.
I get an exit 0 regardless of whether or not its install or uninstall. I have managed to get pidgin to work for now, but it is no means ideal for my purposes.
I kept getting this...
rastlosen@rastlosen-laptop:~$ sudo apt-get install sametime-connect
[sudo] password for rastlosen:
Reading package lists... Done
Building dependency tree
[Code]...
Everytime I install a package or use update manager I get the following message.
Code:
E: linux-image-2.6.32-22-generic: subprocess installed post-installation script returned error exit status 2
E: linux-image-2.6.32-23-generic: subprocess installed post-installation script returned error exit status 2
E: linux-image-2.6.32-24-generic: subprocess installed post-installation script returned error exit status 2
E: linux-image-generic: dependency problems - leaving unconfigured
E: linux-generic: dependency problems - leaving unconfigured
E: linux-headers-2.6.32-22-generic: subprocess installed post-installation script returned error exit status 2
E: linux-headers-2.6.32-23-generic: subprocess installed post-installation script returned error exit status 2
E: linux-headers-2.6.32-24-generic: subprocess installed post-installation script returned error exit status 2
E: linux-headers-generic: dependency problems - leaving unconfigured
The install/upgrade appears to work but I'm getting concerned about the message continuing for so long.
I'm using ubuntu 10.10 maverick, a package named lmodern is not required by the system, but it can't be remove or purged as follow:
Code:
yurippe@Neptune:~$ sudo apt-get autoremove
Reading package lists... Done
[code]....
I am using a fully updated fedora 13 64-bit system and when i run make on xoscope i get the following error:
collect2: ld returned 1 exit status
I have already installed all of the prereqs. And the configure went without errors.
I am preparing everything that I will be using in my fourth year project which is based on the grid computing concept. My problem is that before I installed ubuntu 10.10, I was using 9.10. And in my previous version (9.10) I was able to install condor through the synaptic package manager comfortably,but after upgrading to version 10.10 am getting the following error after installing condor:
"E:condor:subprocess installed post-installation script returned error exit status 127"
i have a problem and it's been persisting since i installes MST Core fonts.
terminal log is here:
-----------start of pasting -----
user@Ubuntu9:~$ sudo apt-get -f install
Reading package lists... Done
Building dependency tree
Reading state information... Done
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.
code....
I have had no problems with downloading/installing updates and programs, and everything worked fine. Until memtest came along. It ran by itself (I think my dad made it the first boot option in grub), and now if I try to install any packages or programs, it will either say "Grub installation failed" or that any packages I tried to install failed. If I removed memtest, would that make it possible for me to install stuff again? Or is there a way to work around it?the main error report I get is: "E: memtest86+: subprocess installed post-removal script returned error exit status 127"
View 1 Replies View RelatedCode:
E: empathy-common: subprocess installed post-installation script returned error exit status 2
E: empathy: dependency problems - leaving unconfigured
E: nautilus-sendto-empathy: dependency problems - leaving unconfigured
From the Synaptic Package Manager, I searched for HL-1440. There were two files appeared: (1) brother-lpr-drivers-laser1, and (2) brother-cups-wrapper-laser1. When I marked (1) for installation, (2) was automatically selected. After I applied the files for installation, I received this error: "E: hl1440lpr: subprocess installed post-removal script returned error exit status 126." What should I do? I am still learning Linux/Ubuntu and really don't have much experience with this.
View 2 Replies View Relatedstarted getting errors from software centre, synaptic and updater that halevt is giving error "exit status 100" Tried reinstalling halevt by software centre, synaptic, and terminal without any luck.
View 5 Replies View RelatedI get this error whenever trying to update or install applications:
Quote:
E: sun-java6-plugin: subprocess installed post-installation script returned error exit status 2
What can I do here?
Everytime I attempt to install anything, in any way, I'm given the following error message:
E: lib32nss-mdns: subprocess installed post-installation script returned error exit status 2
E: wine1.2: dependency problems - leaving unconfigured
I went into Synaptics Package Manager and told it to uninstall WINE in case that was what was causing the problems. It sort of half-uninstalled-it then gave me that exact same error message.I have two threads currently open on the forums - adjusting laptop brightness and flashing BIOS - and both problems hit a brick wall because of this same error message.
I'm having an issue when I'm trying to install SuSE linux onto my desktop.I go through all the steps and everything looks okay, but when it starts to install the packages, I get an error message that basically says:kernel.desktop - unable to install, exit status 127.I have a ATI X1950 video card in the computer, as well as a AMD 64 FX CPU in the system.
View 7 Replies View Relatedhow do I decipher the following entries from sendmail log:ruleset=check_relay, arg1=[120.2.197.187], arg2=127.0.0.11, relay=[120.2.197.187], reject=553 5.3.0 Rejected - your IP is blacklisted by http://www.spamhaus.org: 1 Time(s)
View 3 Replies View RelatedI get the following message when trying to access my 1tb usb drive "Error mounting: mount exited with exit code 1: helper failed with: Error opening '/dev/sdr1': Permission denied Failed to mount '/dev/sdr1': Permission denied Please check '/dev/sdr1' and the ntfs-3g binary permissions, and the mounting user ID.More explanation is provided at [URL].. Really wierd thing is Linux Mint Debian reads it just fine
View 1 Replies View RelatedI'm getting the following output when trying to compile my cpp project:
Code:
"/usr/bin/make" -f nbproject/Makefile-Debug.mk QMAKE= SUBPROJECTS= .build-conf
make[1]: Entering directory `/home/walther/NetBeansProjects/CppPlay'
"/usr/bin/make" -f nbproject/Makefile-Debug.mk dist/Debug/GNU-Linux-x86/cppplay
[Code].....
I've seen you guys replying to others about this collect2 error, but all of them had some kind of informative message from the compiler.
Can't boot into Ubuntu. Using recovery mode, I get fsck exit with status 3 error. I did man on fsck and there is no reference to status 3. Same issue as [URL]
I have my data on sdb3 which is having this issue. File system is ext4. I can't go into shell or anything, I get the fsck error and the system reboots right away and stuck in that loop.
I have been trying to set up ssmtp so I can send email using Gmail's ssmtp servers. However, when I try to send mail (using mailx), I get the following message:
Code:
Can't send mail: sendmail process failed
Here's the last line from dmesg (the only one applicable, according to the timestamps and message content):
Code:
[484114.608378] sendmail[17975]: segfault at 0 ip b7dbbbf3 sp bfb0dc4c error 4 in libc-2.11.2.so[b7d44000+14e000]
Here's my ssmtp.conf:
Code:
#
# /etc/ssmtp.conf -- a config file for sSMTP sendmail.
#
[code].....
I am making a project learning about inheritance and polymorphism
it consists of
Account.h
Account.cpp
[code]....
I am trying to extract a .tgz file. I have used the command tar - xvwzf filename.tar but I get the following error:
gzip: stdin: decompression OK, trailing garbage ignored
tar: Child returned status 2
tar: Exiting with failure status due to previous errors
root@test:/datastore/Newfolder# tar -xvwzf filename.tgz