I don't know if this the right place to ask this question. If not excuse me.I installed apache server on my ubuntu and I've changed the www folder in etc/apache/.../default from /var/www to home/user/www but now i haveForbiddenYou don't have permission to access / on this server.
View 3 RepliesIn my website, I'm putting shared files in a "/global" folder. Both "styles.css" and "library.php" are in this global folder. HTML code seems to be working ok - the following bit works great to pick up a style sheet:
Code:
<link rel="stylesheet" type="text/css" href="/global/styles.css" /> However PHP does not seem to understand my root directory. Using the following does not work:
Code:
include_once("/global/library.php");
I receive a "failed to open stream: No such file or directory" error.Spelling out the entire full path works, like so:
Code:
include_once("/srv/www/mysite/global/library.php");
But this type of code is no good as I may change servers in the future. I have my "DocumentRoot" set correctly in my sites-available file. It seems as if PHP is ignoring it. Is there a config file someplace (htaccess? Local php.ini?) where I should update my root directory for this site only? Or am I following bad form and there's a better way to do this? Relative paths don't seem like the answer here though...
I am trying to use my external hard drive to store webpages and on the webpages it is uploaded to the folder. When i navigate to the address it says it is forbidden. I also noticed that it would not let me upload files to the folder it says i do not have permission. Can someone help me get passed the barriers. The hard drive is ntfs.
View 7 Replies View RelatedI've had apache installed for a couple of years with no problem but this morning I thought I would change the apache document root to my secondary disk so that my WAMP setup in my Windows partition and LAMP could share the same files. I've edited the etc/apache2/sites-available file to point it to the new location of my document root but I am getting a 403 - forbidden "You don't have permission to access / on this server." error when I try to load files through the browser. I'm not sure if this is a permissions issue or the way I've edited the sites-available config.
Here is the new sites available config:
Code:
<VirtualHost *:80>
ServerAdmin webmaster@localhost
DocumentRoot /media/Data/webroot
<Directory />
Options FollowSymLinks
AllowOverride None .....
the terminal and logged in as root i was changing file permissions and happened to change the root folder to 700. Now my icons have gone and i can't even access the terminal.
I was just wondering if it is possible to go to rescue mode using the cd and restore all the appropriate file permissions to root/ users if possible
I moved from F12 to F14, I've installed using yum Apache, MySql, php, phpMyAdmin. That all works fine, I've made index.php with phpinfo() function and if it is in /var/www/html/ it opens in web browser. I extracted daloradius-0.9-8 in /var/www/hmtl/daloradius folder changed ownership to apache:apache set alias to myradius. When I point web browser to localhost/myradius I get error 403, forbidden. I moved index.php with phpinfo() to daloradius (overwriting old index.php) and same stuff happens. Error 403. What am I doing wrong?
View 4 Replies View RelatedMy ISP Blocks port 80 so I changed the port to 8081 after I do this and restart Apache and use my IP with :8081 after I get a page saying Not Found The requested URL /index.html was not found on this server. I get this same message if I use my real IP or the IP from my router. What can be causing this?
View 2 Replies View RelatedI wanted to log some messages on Apache. So I added in VirtualHost definition
Code:
CustomLog /var/log/apache2/site-resp_log resp
LogFormat "%{X-Forwarded-For} %D %t %T %v %O %b %A %B" resp
and restarted apache2.
I got following error
Code:
* Restarting web server apache2
Syntax error on line 33 of /etc/apache2/sites-enabled/site.com:
Unrecognized LogFormat directive % [fail]
root@server:/var/log/apache2# vi /etc/apache2/sites-available/sites.com
Here is a page I referred to. I am not able to understand the syntax error.
I am trying to install Zend Server, and that went well. Apache and all the other items were installed.
But when I go to start Apache, I get this error:
Quote:
root@laptop:~# /etc/init.d/apache2 restart
* Restarting web server apache2 Syntax error on line 6 of /etc/apache2/sites-enabled/zendserver_gui.conf:
Invalid command 'php_admin_flag', perhaps misspelled or defined by a module not included in the server configuration
[fail]
And on line 6: php_admin_flag tidy.clean_output off
The rest of the file is below:
Quote:
# Warning: Modifying this file will break the Zend Server Administration Interface
Listen 127.0.0.1:10083
NameVirtualHost 127.0.0.1:10083
# do not allow override of this value for the UI's Vhost as it should always be off when generating non-html content such as dynamic images
code....
the hard drive on my web server died so I replaced it and installed Fedora 15. I have been installing the OS on a small drive and then mounting other drive(s) for storage and did the same thing here. The problem is that I cannot get Apache to follow symlinks. Apache is partially working, it will serve my index.html page in the web page root directory and I made another directory called webtest and put some files in, and that worked fine. I made a symlink from the root directory to a folder on the mounted drive but when I try to access it, it gives me the old 403 Forbidden error. I also made a similar link in the webtest directory, I can view the other files in that directory but it does not show the link - also, trying to force it by typing the full path in the browser gives the same 403 error.
I have checked the permissions and SELinux types (using ls -Z) and they seem to be fine and I cannot find any .htaccess files. All the files on the mounted drive are owned by www:www but I also tried setting the user and group to www in httpd.conf and it still gave the same issue, so I changed them back to apache. I've been reading posts and sites on this for hours now and I'm still lost. I can post results of log files if they are of any use, I just wasn't sure what to post because it is somewhat working.
I am sure this information is out there somewhere, but Googling apache access.log and hostname does not give you any good leads... so I hope someone here might be able to provide me with a quick answer...I am setting up a cluster of web servers, so I would like to name the access.log and error.log with the hostname of the individual servers to be able to distinguish one from another.
View 4 Replies View RelatedBut after it updated and I restarted the service, it's reporting 2.2.0 on any error page. Yet through yum it's reporting 2.2.13-1. Is that normal? I've only ever used 2.2.x, starting with 2.2.6ish.
View 3 Replies View RelatedWhen I want to change my docroot in /home/Vincent/www or /home/Vincent/www/ it gaves me an.
:Syntax error on line 278 of /etc/httpd/conf/httpd.conf:
DocumentRoot must be a directory
I googled it already and they sad that you have to type in:
chcon -R -h -t httpd_sys_content_t /home/Vincent/www << doesn't work so I tried also chcon -R -h -t httpd_sys_content_t /home/Vincent/www/ But nothing seems to work?
I just tried changed the port that apache runs on from 80 to 8080 (I need port 80 for a difference service so I am changing the apache port). After doing this I load 127.0.0.1:8080 in a browser and get a 404 error generated by apache, if I change it back to 80 it works fine.
View 2 Replies View RelatedI need to trust a new Verisign Root cert, I have uploaded it to the /etc/ssl/certs store but I am still getting the Handshake failure error when WorldPay call back to my site..
Quote:
I believe I still need to create a sym link? So I followed this article but I get an error..
Quote:
I have also tried update-ca-certificates.
I'm using Ubuntu 8.04 LTS.
I'm trying to add a password policy into OpenLDAP 2.4 on 10.04 and it's driving me out of my mind. I keep getting this error: root@www:/etc/ldap# sudo ldapadd -x -D cn=God,dc=example,dc=org -W -f ppolicy.ldif Enter LDAP Password: adding new entry "cn=default,ou=policies,dc=example,dc=org"ldap_add: Invalid syntax (21)additional info: objectClass: value #0 invalid per syntax
[Code]...
what can I do if I changed my ubuntu password and cant remember what it is?I only have 1 user on my system - me, and I changed the password today, thinking it was obvious to remember my new password, but I cant remember it exactly
View 6 Replies View RelatedThe system is an old AMD Duron 650MHz that was dug out of the garbage, trying to set it up as a light duty server. I installed ubuntu 10.04 with no errors or troubles during the install, however whenever the system is booted it sits at a cursor for about a minute then goes into busybox giving the error "Gave up waiting on root device." and says that the hard drive does not excist. If I sit at busybox for about another minute and type exit it then boots ubuntu 10.04 with no errors or issues.
View 7 Replies View RelatedProtect against root password change[Log in to get rid of this advertisement]I have recently had to force a change of the root password on a linux box I was running. It was a test system which I had not used in a while, so I forgot the root password (not so smart).Anyway, I found that it was amazingly easy to reset the root password. Here is a straight forward article on how to do it.URL...
My question is: how can you protect against this? I see this as a security hole.I understand that the user must have physical access to the computer, but if I want to lock the system down so you cannot easily enter single user mode or the root password cannot be changed.
Ubunto 8.4, running on 2nd partition on Apple Intel iMac. Several months ago, following a routine update, I found I could no longer install routine updates. Investigating further, I find
"You don't have permissions to..."
then sudo: /etc/sudoers is owned by gid 1002, should be 0.
That's not me! I am the owner and root user of this computer. How could this get changed? How can I change it back to me? The Linux platform of the computer has not been exposed to the net except for Ubuntu forums and updates. No one else has used this computer.
I used to use the root account for everything for more than a year then I moved to a user account for security reasons but almost all files had root as owner so I could not go 5 minutes without having to change to root and then change the owner of a file to my username to make it usable. I got fed up with this so I just changed the owner of every file on the system to my username instead of root.
command chown -R myusername * in the base directory /
Everything was fine until I restarted and the login screen became non functional and I got 2 error messages related to xsession and gnome errors. I think this is because the login screen might have its own user account and it cant access the files for the login process because it is owned by myusername. So my question is what is the user-name of the login account and what folders/files need to have their owner changed so the login process can work? I'm on 10.04 lucid.
I am using fedora 13. If is use the command "cd //". It changes to root directory. How is it? What "//" denote?
View 6 Replies View RelatedI set up a servber on my local machine, & also PHp - Both working fine.I'm trying to load up MYSQL i have installed it, & *can* start/stop the server. however if I do anything else with it, I get this error :-
Quote:
root@gordon-desktop:~# sudo mysqladmin -u root -h localhost password MYPASSWORD
mysqladmin: connect to server at 'localhost' failed
error: 'Access denied for user 'root'@'localhost' (using password: NO)'
Query :-
1) How do I know MYSQL is actually active ? (apart from the message it says that its statrted (or stopped).
2) Is there a way to
a) Find out the usernames that are recorded on the MYSQL server ?
b) set / RESET the 'root' username (I know MYSQL root user is different to PC root user)
c) anything else I can do on the PHP / website code to see if MYSQL is working
(as yet, no tables / databases etc have been set up - as I can't get past this error message - I get the same error when setting up a database.)
Ps I did allow my usermname (when logged in to ubuntu) to edit / create files in the /usr/www/ directory (but it is still OWNED by 'root' - that directory)
i actually registered here because i'm done with my knowledge of linux, errors which cause my sys to hang and/or reboot randomly after some time. They occur while the system is under heavy cpu, heavy mem-read-write, mediocre mem fill, heavy hdd io (for ~20 seconds every ~5 minutes).
problem background we ordered two identical PCs (specs below), one of them brought those sata errors quoted below from /var/log/messages, the other one runs flawlessly. Same Hardware and Software Configuration. Faulty one brought reallocated sectors right at start, mass seek errors, read errors. 1st try: swap cables, change bios mode ata_piix <-> AHCI. Didn't work. Went away for repair. Stupid Techie did only swap hdd, so problems occured again. Shipping for repair again. Board AND hdd exchanged. no more seek/read errors, no more reallocated sectors. But similar sata problems right after 3 days of previously described workload. Following logs are from after the last repair.
[Code].....
I did something silly and changed my root user access for mysql access to Any from localhost using webmin. I get an access dented when i try to open up the mysql editing page on webmin. Can any of you tell me if there is a way to change it back to hosts=localhost I am using webmin 1.5.30 on Centos 5.5. I am hoping I can change it by command line or if I can access the config files and change it that way?
View 2 Replies View RelatedI have a recently setup my first linux server (hardy) and am having problems with the permissions for a log file being changed. I believe this is caused by syslogd, but am not sure how to correct it. Bacula will report it is unable to start a backup because it is unable to open the log file (/var/lib/bacula/log) "permission denied". After changing the owner from syslog to bacula, the backup will resume. However, the following day I encounter the same problem because the owner of the log has been changed back to syslog.I see where the permissions for logs are altered in sysklogd, but I am not certain how to make bacula exempt or if this is the right approach.
View 1 Replies View RelatedI have set up Ubuntu 10.04 and am running it on a VPS. I have everything the way I want it but I have encountered a problem. When I created my user, I did this:
adduser myname
that worked fine, it also assigned me to group called myname, which isn't what i wanted. so i tried to change my group to staff with the following:
sudo usermod -g staff myname
it works fine and i can verify my new group by:
groups myname
and get:
staff
but...now here come the bit I don't understand, when I make a new file/folder and then look at their ownership it is the old group (ie. myname). is this right? shouldn't the ownership of the file now be myname staff? not myname myname.
this is what i did to create a new file, while logged in under myname:
touch a
mkdir da
ls -al
I'm currently setting up a dell server with hardware raid 1 on sas 6r. i got 4 sas installed on the server and configured to raid 1 as stated below,
array 1:
slot 0 & 1
array 2:
slot 2 & 3
during the installation, the installer detect the array 2 as sda and array 1 as sdb.. so i proceed with installation on array 2. after completed the installation, the first reboot lead me to a 'grub-rescue" prompt. by following the guide at url Mode, i've noticed that the boot folder has changed to (hd1,1), which i believe it has changed to sdb1. default root device shows that prefix=(hd0,1)/grub.
I run SSH daemon on my Fedora 15 (server). When I generate public/private key on my laptop (client) and put public key to authorized_keys on server it works excellent. But when I change IP address of laptop (change WLAN) I have problem to connect. I searched GOOGLE but I havent find any information. I also tried the same from other laptop with the same result.
View 11 Replies View RelatedI have followed the tutorial from this site [URL]. I have changed this file /etc/apache2/sites-available/default and in this file I have changed AllowOverride None to AllowOverride All but still I get:
Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request. Please contact the server administrator, webmaster@localhost and inform them of the time the error occurred, and anything you might have done that may have caused the error. More information about this error may be available in the server error log. I have installed and reinstalled apache 2 time already.