When i set up a samba server, with no users in it, i can access from any pc, except the W7 ones.
I go to start, execute, type "\servershared" and a window pop ups asking for credentials... but i hava none!!!
i found out that user anonymous / no password works out, but its annoying
is there any way to overpass this autenthication??
provide support for a small business that uses Windows machines to access files stored on an Ubuntu server which has just been upgraded from 8.04 to 10.04 (32 bit version). Before the upgrade the users accessed their share by this batch file:
Code:
net use x: \servernamesharename /user:username
This would then prompt the user for his or her password which they would enter to allow them access to the share.Since upgrading to 10.04, the user gets a "system error 58" stating "The specified server cannot perform the requested operation"If the batch file command is changed to:
Code:
net use x: \servernamesharename
The same error message is given. The only work around I have found is to modify the file to read:
Code:
net use x: \servernamesharename /user:username password
This is not ideal at all as it makes the password protection useless.When I performed the upgrade I left the smb.conf unchanged. The smb.conf file is:
Code:
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
[code]...
I use an IBM S50 desktop running XP as a file and print server via Windows shares and so far all my XP and Ubuntu laptops can see and use the shares. Now I would like to move the S50 to Ubuntu and still use it as a file and print server. To test this, I have installed Ubuntu 10.04 via wubi and then I installed samba. First thing was to do the simplest case: follow the official documentation,
[URL]
I followed it to the letter, editing the smb.conf file, creating a /srv/samba/share directory, changing the permissions, and restarting the daemons. I was able to read and write to the share with my Ubuntu laptop. Success! However, my Windows laptop can see the Samba server, but when I click on the share, "Ubuntu server (Samba, Ubuntu)" to reveal the file system, it asks for a username and password.
how to let XP access the Ubuntu share?
Code:
workgroup = workgroup
server string = %h server (Samba, Ubuntu)
security = user
[Code].....
I have a 500GB external usb drive connected to my USB router (running dd-wrt). I have the router setup with samba and can read/write to it from any PC on the network. I have it setup to automount in Ubuntu. How can I access that mounted samba share when I SSH into the box? I want to cp or mv files from the PC to the Networked samba share via ssh CLI.
View 9 Replies View RelatedHow do I access a NAS Samba server on my network at home.I tried to add a machine in the pyNeighborhood program. I was able to add the machine and the program displayed the machine and all of the shares on the machine, but I was not able to log on. No place to enter my pass word.
View 1 Replies View RelatedI have a NAS running Samba. My Samba shares are accessed from a Windows computer, it works very well.
With the kubuntu 10.04 computer, things are different : I can see the Samba shares in Dolphin, and copy files to the local drive, but lots of applications don't allow me to open a file on a Samba share.
Some applications such as OpenOffice let me browse to the share but refuse to open the remote file
Some other applications don't let me browse to shares at all.
What's up with that ? Surely I'm not the only one wanting to access files on a NAS ? How do other people do it ?
PS I chose kubuntu 10.04 because the 10.10 install hangs, the "ui" workaround I saw here and there did not work, the only solution offered was to go back to 10.04
I wonder how to get Samba share access working well...Dolphin supports Samba but it doesn't really mount anything, it seems... Non-KDE Applications therefor can't access samba that way. In Gnome there was a workaround for the same problem. You could simply go to ~/.gvfs in any application and find the samba mounted there.Is there anything like that in KDE? I set up a Samba mount via /etc/fstab for now but that is quite annoying because it fails after each Suspend, changing WLAN Access Points, etc. Then I have to go to the console and manually launch sudo mount -a to get it working again. How can I make things more comfortable?
P.S.: I'm even up for using something else than Samba to talk to my fileserver. However I don't know of anything that would work better in this regard. (NFS would have the exactly same problem for example)
I got a ftp server (proftpd on debian) on machine "A" and I got a Samba Server (debian also) on machine "B" with a shared folder called "public". how do I access the shared folder via FTP?
I already tried the following command:
mount -t smbfs //machine B/public /media/public
And the following message appears:
mount: special device //machine B/public does not exist
But the folder public is already shared cUz I can access it using Windows XP.
I currently have a Samba share on a Debian 7 system. This share was only ever used by Windows systems on the network.
I just finished setting up a Debian 8 system with Xfce, and now I would like to connect to the share. I already installed gvfs-backends and gvfs-bin. When I go to Thunar file manager, and click browse network, I'm presented with a "Windows Network" shortcut. When clicked it says: Failed to open "Windows Network". Failed to retrieve share list from server: No such file or directory.
I am having a problem accessing my samba shares from my notebook that has a fresh install of Fedora 15. I know that the server with the samba shares is working since I can access them from the windose box. I have just moved from using Ubuntu to Fedora and have definitely found my home. How would I tell if samba is running (or any service for that matter) on my notebook? I Installed samba-client
Code:
yum install samba-client
Though I still cannot access the shares. All it shows is windows network.
I'm trying to do the normal setup of sharing some dir's on my linux machine using samba, to allow a windows laptop to access them.
I've managed to get the printer shared and this is allowing to send print jobs, which come out beautifully! however the actual file shares still aren't accessible
Depending on my settings, if I have security = user then when I access from the windows machine I get a username and password box - I dont want this functionality, I want the system to access right away as it would between two windows shares.
If i change security = share then it simply lists the shares, but tells me they are all inaccessible.
I've googled and searched here, tried various different things but I just can't see why/where its asking me for the username/password combo.
Code:
From /var/log/samba/smbd :
Code:
Since "upgrading" (ha!) to lucid I have had a number of problems that I am working my way through. The latest is accessing samba shares from a Win7 PC. It takes minutes to open the requested share from the Windows 7 PC. File transfers, once the directory is accessed, can be measured in bytes. It is an absolute trickle.
AFAIK the smb.conf is unchanged and, in any case, there is no problem accessing the shares from another linux PC.
When I boot up, or come out of standby, etc, it takes about a minute for my Windows shares on Win 7 to show up under Network. Is there anything I can try that will make this initial connection faster? Either on Debian or the Win7 machine? I have the latest Debian vanilla. This is over wifi. My other devices list the shares right away.
View 1 Replies View RelatedI have a machine acting as a gateway for a private network. While it can ping hosts on that private network, I can't use samba (smbclient or smbmount) to access shares on hosts on the private network from that machine. Other machines on the private network can access shares on other machines - just not the gateway server.
Here's how the gateway is configured:
When I try to connect to ports 139 or 445 (via smbclient or smbmount) the mount() system call times out. As I mentioned above, I can ping those hosts, so UDP packets work but TCP packets seem to get blocked or lost.
I am getting samba error while accessing forlde form the redhat mechine (local mechine)
Error "NT authentication failure" same is able to access as anonymous user
Find my samba configuration file:
I wish to prevent the samba messages (mainly nmbd and winbindd) from appearing in the system log (/var/log/messages). I want to allow samba logging to the standard samba logfiles, but prevent the syslog getting clogged up by samba. I added syslog = 0 to smb.conf and reloaded the config but the messages were still appearing. I also tried the following (and restarted the syslog via /sbin/service syslog restart) # Suppress messages from samba.
nmbd.* /dev/null
smbd.* /dev/null
winbindd.* /dev/null
For interests sake the messages I'm getting are below (I'm not concerned about the messages themselves, I can chase them up at my leisure via the samba logs) Mar 18 09:58:29 SERVER nmbd[3808]: query_name_response: Multiple (2) responses received for a query on subnet xx.yy.z.zz for name DOMAIN<1d>. Mar 18 09:58:29 SERVER nmbd[3808]: This response was from IP xx.yy.z.zz, reporting an IP address of xx.yy.z.zz.
So i run a ubuntu 8.10 server setup for webhosting. I have my router portforwarding to my servers LAN IP, and i have DNS setup and pointing to my WAN IP.
My host entries are all setup on ubuntu also.
The problem : I can access my server from typing WAN IP address or any of the URLS with webpages hosted on the server, all seems to be working. BUT, i can only access these from OUTSIDE my network. If i try access them within my LAN, i get sent to my routers login page.
I really cant find anything that could be causing this..
I posted this question a while ago but haven't had any luck getting it answered so I reworded everything to make it more clear. I started an Ubuntu web server on an old work laptop. The purpose of this server is to host a small file-sharing site, a forum, and a wiki. I have no prior experience with command line Ubuntu but am trying to figure this all out.
So far Ive setup the LAMP server, so apache, mysql, and php are installed. Ive also installed phpBB3 and Mediawiki. Both phpBB3 and Mediawiki are able to open from inside my LAN. I also have SSH setup and am able to use putty to manage the server from inside my LAN. Mediawiki runs slow internally but this is a secondary concern.
Externally to the LAN I can access the webserver using SSH(but sometimes it is too slow for anything that opens up such as nano or the SQL password prompt to display and the connection drops). I can also browse to the site and see the default apache welcome message. But I cannot open the mediawiki or phpbb site. Both will sit indefinitely and not open. The access log on the server shows that the request is being passed through though.
I am on Ubuntu 10.04.2 on Amazon EC2.I want to use the Cherokee web server and have it (and php) running under www-data then have the files also owned by www-data. I am only able to ssh and scp into my server using the user ubuntu. This means that I am unable to edit the files.I want to be able to edit the files owned by www-data through ssh/scp.Could you assist me in setting my server to allow me to edit the web files through scp?
View 9 Replies View Relatedthis is my output when I try to compile samba 4.0.0 alpha 7 in Ubuntu using the spec file provided in the samba packages:
bin/mergedobj/samba-util.o: In function `file_lines_parse':
(.text+0x595c): undefined reference to `_talloc_steal'
bin/mergedobj/samba-util.o: In function `data_blob_talloc_named':[code]....
I am a complete newbie at web servers, so I installed Ubuntu Server and have a LAMP set up. I have gotten dynamic DNS to link to my domain, and that seems to be working. My domain is 6py7.com. If I try to access my domain from within my home network it links me to my router's main page (192.168.2.1). I have my server set up with a static ip at 192.168.2.100 and have port forwarding set up.
Is there something I missed with the setup of this? I can only access my domain if I use a network outside of my home network, but if I am within my home network the domain name links to the router.
I have a computer which has a public IP.My ISP has allowed only port 22 for my machine to be accessed outside from internet.I want rest of my computers which are connected to this machine be accessible via SSH on internet.I can configure IPTABLES to route different ports to internal machines but since ISP has given only one port for the gateway how can I go for it any guesses.I came across some thing reverse SSH tunneling but that has to keep the connection alive all the time at gateway I want my trusted people to be directly able to access the machines on LAN to which they have account to login in this scenario.
View 9 Replies View RelatedI need to Install MySql Server somewhere that I can access. Instead on installing it in a Windows box like I have for years, I'm thinking of putting it on a Ubuntu Server box (or virtual machine) instead. Should I do it on a Ubuntu Server or a Ubunto desktop box? I have never installed Ubuntu as a server, is it more or less the same as installing the desktop version? Lastly, is there multiple versions of Ubuntu where one might be more appropriate than another? All I want is a machine that I can access MySql via an IP address. Don't need DHCP, dns, Mail server or anything.
View 4 Replies View Relatedi try to access my webmin but it give me "This webpage is not available." now, webmin is useless for me if i want to uninstall webmin, is some other application will affected (like apache, mysql, etc) ?
View 9 Replies View RelatedI have downloaded the Mediawiki demo appliance from UEC store. I have installed it and also it is running. I would like to know how to access the mediawiki demo appliance. I tried accessing it as [URL] but is not accessible.
View 2 Replies View RelatedI'm running Apache2 and PHP5, hosting multiple virtual domains on my server. The directories of the domains (/var/www/<domain>) aren't publicly readable, so the websites can't access each others content as the scripts are run using different user accounts. They can, however, access other folders on the system that have public access for any user. I tried using the following PHP code, which listed the filesystem root:
Quote:
<?php
$handle=opendir("../../../..");
while($file=readdir($handle)){
echo $file . "<br/>";
}
?>
I will be hosting sites for other people so I don't want them to be able to access my entire server with PHP. Is there any way i can do this?
I currently have samba setup and connecting. What I am trying to do is have multiple users with access to different directories. For example , let's say there are folders A B C on my Linux machine. I want one guy to see A and C and another guy to see B and C and a third guy to see them all. But I want each user to have access to change delete or execute the files within these directories that they have access to
View 4 Replies View Relatedi have php5 and mysql on ubuntu server which is hosting a WordPress blog. i activated it remotely over the internet and it works fine still over the internet. now im home and using my local network again and now when i try to go into it with its local IP, it just shows some text (blog title, posts and so on) with NO pictures.
View 2 Replies View RelatedI would like to read and write to a folder in an Ubuntu VPS remotely via a Windows Explorer (Windows 7 Ultimate). Considering that my VPS has very little resources (128MB RAM), what program should I use?
View 2 Replies View RelatedI'm trying to delete directories (long story, Mac temp files there, Windows not cooperating) on a sever connected to a HP 20 Modular Smart Array set up as RAID5. System currently running Windows. I've booted from a 9.10 LiveCD but can't see the external drives. Is it correct that I need to install mdadm to "see" those drives from LiveCD? From a different machine (linux) I can mount the drive using samba like so:
sudo smbmount //IP address/hostname RAID5 Root Share /mnt/ntserver -o username=smith,password=abcde123
I have admin privileges on the Windows OS. In linux (or Windows beforehand), is it possible to take ownership of the directories so that I can do a rm -f -r <dir> ?