Server :: Getting Samba Error While Accessing Forlde Form The Redhat Mechine

Sep 10, 2010

I am getting samba error while accessing forlde form the redhat mechine (local mechine)

Error "NT authentication failure" same is able to access as anonymous user

Find my samba configuration file:

View 58 Replies


ADVERTISEMENT

Ubuntu Networking :: Accessing A NAS Samba Server With Lubuntu?

Aug 11, 2010

How do I access a NAS Samba server on my network at home.I tried to add a machine in the pyNeighborhood program. I was able to add the machine and the program displayed the machine and all of the shares on the machine, but I was not able to log on. No place to enter my pass word.

View 1 Replies View Related

Server :: Samba On Redhat 9.0 Shows An Unknown IP Address?

Jun 30, 2010

I am running RedHat 9.0 on a VMware on Window XP, I have bridged the network card eth0 such that
I can ping the host machine 192.168.45.67 and the Windows XP machines on my LAN.

I managed to set up the samba server on this Redhat 9.0, And I can see the netbios name on my WindowXP: Rhl machines. Now I want to reach the Windows machines vi sambaclient but I get an Ip address that is not on my network -192.168.24.1.I did not set this IP address.

This is the message I get when I run smbclient so that I can reach windows machine when I am on Redhat:

# smbclient //machine name/name of user on windows machine
added interface ip=192.168.45.90 bcast=192.168.45.255 nmask=255.255.255.0
Got a positive name query response from 192.168.45.21 (192.168.24.1 192.168.249.1 192.168.45.21
error connecting to 192.168.24.1:139 (Network unreachable)
Error connecting to 192.168.24.1 (Network is unreachable)
Connection to machine name failed
#

My question is Where does 192.168.24.1 IP address come from. Where must I look in order to remove it ( in Linux or Windowx Xp.

View 2 Replies View Related

Hardware :: Redhat 5.3 Compatible Small Form Factor Config?

Jan 20, 2010

I'm looking to buy hardware to run my company's software.It usually runs on rack systems, but I want something that I can take with me on the plane, so a Small Form Factor system is what I'm looking for. My colleagues just stay in the server room, so don't know what to advise to take on the road ...

Here are the minimum specs:

- compatible with redhat 5.3
- 4GB of ram, extensible to 8GB
- 64 bits Intel processor, 2 or 4 cores.

[code]....

View 2 Replies View Related

Ubuntu :: Mount A Samba Share Form Another Pc?

Feb 8, 2010

I want to mount a samba share form another Ubuntu pc.

With nautilus I can do: smb://xxxxxxx;username@192.168.1.12/sharedfolder/ And i can browse the shared folder without problem

but I want to mount it. I have tried:

Code:
user@compu:~$ sudo mount -t smbfs //192.168.1.12/sharedfolder /mnt/folder -o username=username
mount: wrong fs type, bad option, bad superblock on //192.168.1.64/esco3,
missing codepage or helper program, or other error

[Code].....

Im aware I'm not passing the password and I was hoping it would ask me. Also I'd like to store all that info in my computer and try to auto mount the shared every time i use the pc.

View 3 Replies View Related

General :: Error - Failed To Start X Server (RedHat 5.3)

Mar 7, 2010

I installed Red-hat 5.3. Problem is that it is not showing graphical interface. Only kernel / command prompt is available. I tried startx, then I got this msg. No video BIOS modes for chosen depth. Also showing that:
ERROR: Failed to start X server.

View 2 Replies View Related

General :: Redhat Advance Server Got Error No.15 Message?

Sep 1, 2010

My redhat advance server got error no.15 message

View 1 Replies View Related

OpenSUSE Network :: Can't See External HD Shared With SAMBA Form Certain Devices?

Aug 17, 2011

Just tried to be as descriptive as possible in the title. I'm running Opensuse 11.4, KDE 4.6.5 under Tumbleweed repos. I have an external HD with two partitions (Argos & Hercules) mounted in fstab as follows:

Code:
/dev/disk/by-id/ata-WDC_WD5000BEKT-80KA9T0_WD-WXA1A8011853-part5 swap swap defaults 0 0

[code]....

View 9 Replies View Related

Software :: Error, Check The HTTP Server Authentication Requirements For Accessing This CGI

Jan 1, 2010

I using rhel5 i installed&configured nagios ofter loged in the nagios server when i m enter hosts & services i m getting this error # it appears as though you do not have permission to view information for any of the hosts you requested. If you believe this is an error, check the HTTP server authentication requirements for accessing this CGI and check the authorization options in your CGI configuration file.

View 9 Replies View Related

Red Hat :: Fatal Server Error No Screens Found On RedHat 7.1 XFree86

Apr 4, 2009

there are several posts related to my problem but not quite what I want. I don't need any effects to be running nor do I need perfect resolution. I have a PCI-E card Nvidia 8600 gts and I need to run redhat 7.1 for reasons that are not debatable. I also have an onboard ati radeon X 1250 but currently I am running the PCI-E.The installation was successful and ran in GUI, however after installation and reboot, the screen keeps flickering trying to load the desktop.I just need to get the GUI running the same way the installer was able to run in GUI, I tried editing the XF86Config file to change the driver to either vesa or vga but still didn't work. Probing for devices is not an option since the card is not listed and the maximum video ram goes up to 64MB in xconfigurator. It probes my card as a VGA generic with 1 MB ram. I know there is a way to have the desktop load just the same as the installer's gui settings but that's where I need help.

this is after changing all the 'driver' values to vesa. I don't understand why it can't find the screen even though I used the horizontal and vert. sync values for my monitor. Any instructions or advice on how to just get the desktop loaded would be great, I know this is a very old OS but regardless I need for it to work.

View 10 Replies View Related

OpenSUSE :: Recover Data Form Old 5.25 Floppies - ERROR: Cannot Read `/dev/fd0' (Input/output Error)

Mar 15, 2010

I don't know the format of these old floppie disks, ive tried

Code:

PC8-248suse:~ # file -s /dev/fd0
/dev/fd0: ERROR: cannot read `/dev/fd0' (Input/output error)

how i can go about reading this data?

View 9 Replies View Related

Server :: Unable To Connect Samba Server From Other Pc Giving Error NT Authentication Failure

Jul 28, 2010

I am not able to connect samba server from other linux pc giving error: NT Authentication Failure

But am able to access through anonymous login from linux Same is working fine will all smb users through windows. I am using rhel 5.

View 3 Replies View Related

Ubuntu Servers :: Accessing From W7 To SAMBA?

Jun 24, 2010

When i set up a samba server, with no users in it, i can access from any pc, except the W7 ones.

I go to start, execute, type "\servershared" and a window pop ups asking for credentials... but i hava none!!!

i found out that user anonymous / no password works out, but its annoying

is there any way to overpass this autenthication??

View 2 Replies View Related

Ubuntu :: XP Accessing A Samba Share?

Sep 1, 2011

I use an IBM S50 desktop running XP as a file and print server via Windows shares and so far all my XP and Ubuntu laptops can see and use the shares. Now I would like to move the S50 to Ubuntu and still use it as a file and print server. To test this, I have installed Ubuntu 10.04 via wubi and then I installed samba. First thing was to do the simplest case: follow the official documentation,

[URL]

I followed it to the letter, editing the smb.conf file, creating a /srv/samba/share directory, changing the permissions, and restarting the daemons. I was able to read and write to the share with my Ubuntu laptop. Success! However, my Windows laptop can see the Samba server, but when I click on the share, "Ubuntu server (Samba, Ubuntu)" to reveal the file system, it asks for a username and password.

how to let XP access the Ubuntu share?

Code:
workgroup = workgroup
server string = %h server (Samba, Ubuntu)
security = user

[Code].....

View 7 Replies View Related

OpenSUSE Network :: Accessing Samba Shares In KDE?

Jan 6, 2010

I wonder how to get Samba share access working well...Dolphin supports Samba but it doesn't really mount anything, it seems... Non-KDE Applications therefor can't access samba that way. In Gnome there was a workaround for the same problem. You could simply go to ~/.gvfs in any application and find the samba mounted there.Is there anything like that in KDE? I set up a Samba mount via /etc/fstab for now but that is quite annoying because it fails after each Suspend, changing WLAN Access Points, etc. Then I have to go to the console and manually launch sudo mount -a to get it working again. How can I make things more comfortable?

P.S.: I'm even up for using something else than Samba to talk to my fileserver. However I don't know of anything that would work better in this regard. (NFS would have the exactly same problem for example)

View 5 Replies View Related

Debian :: Accessing Samba Shared Folder Through FTP

Oct 13, 2009

I got a ftp server (proftpd on debian) on machine "A" and I got a Samba Server (debian also) on machine "B" with a shared folder called "public". how do I access the shared folder via FTP?

I already tried the following command:
mount -t smbfs //machine B/public /media/public
And the following message appears:
mount: special device //machine B/public does not exist

But the folder public is already shared cUz I can access it using Windows XP.

View 1 Replies View Related

Software :: How To Install Samba In RedHat 9.0

Nov 25, 2010

How can I install the SAMBA in my red hat 9.0 distro. Please send me the step-by-step procedures on how to do the installation and setup plus the commands that I am going to used to setup the samba. I was assigned a tasks of setting up file server using redhat 9.0.

View 4 Replies View Related

Server :: Log Error Samba ?

Mar 1, 2010

i have a questioned about samba on my suse 10.2 recently i just give attention to log.smbd on my samba cause i've read some error on the log, is there any way to solve error that log.smbd give ? ex:

Code:
lib/util_sock.c:get_peer_addr(1229)getpeername failed.Error was transport endpoint not connected.And is it possibly some related error that log.smbd give was a hint for some missing files on samba, cause sometime user complain about why their folders move to another directory, what i know maybe another user on same group do that accidentally cause on group they want to do editing files and folders so they all on one group have write and execute access to folders and files.

And is there anyone have used fam/similar tools for monitoring files and directory ?

View 1 Replies View Related

Ubuntu :: Webpage Editor To Create Form And Form Fields?

Jun 10, 2010

I've already tried Seamonkey to create a web page but can find no way to create a web form in which I want to create form fields. Before moving to Ubuntu I used Microsoft FrontPage to create web pages with form fields. This was easy to do. what is available to do the same in Ubuntu?

View 2 Replies View Related

Debian Configuration :: Accessing Samba Share From Xfce

Feb 15, 2016

I currently have a Samba share on a Debian 7 system. This share was only ever used by Windows systems on the network.

I just finished setting up a Debian 8 system with Xfce, and now I would like to connect to the share. I already installed gvfs-backends and gvfs-bin. When I go to Thunar file manager, and click browse network, I'm presented with a "Windows Network" shortcut. When clicked it says: Failed to open "Windows Network". Failed to retrieve share list from server: No such file or directory.

View 8 Replies View Related

Fedora :: Accessing Samba Shares From Fresh F15 Install

Jun 6, 2011

I am having a problem accessing my samba shares from my notebook that has a fresh install of Fedora 15. I know that the server with the samba shares is working since I can access them from the windose box. I have just moved from using Ubuntu to Fedora and have definitely found my home. How would I tell if samba is running (or any service for that matter) on my notebook? I Installed samba-client

Code:
yum install samba-client

Though I still cannot access the shares. All it shows is windows network.

View 3 Replies View Related

Ubuntu Servers :: Accessing SAMBA Shares Since Upgrade?

May 27, 2010

provide support for a small business that uses Windows machines to access files stored on an Ubuntu server which has just been upgraded from 8.04 to 10.04 (32 bit version). Before the upgrade the users accessed their share by this batch file:

Code:

net use x: \servernamesharename /user:username

This would then prompt the user for his or her password which they would enter to allow them access to the share.Since upgrading to 10.04, the user gets a "system error 58" stating "The specified server cannot perform the requested operation"If the batch file command is changed to:

Code:

net use x: \servernamesharename

The same error message is given. The only work around I have found is to modify the file to read:

Code:

net use x: \servernamesharename /user:username password

This is not ideal at all as it makes the password protection useless.When I performed the upgrade I left the smb.conf unchanged. The smb.conf file is:

Code:

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the

[code]...

View 7 Replies View Related

Ubuntu :: Accessing A Samba Share Via Command Line?

Jul 3, 2010

I have a 500GB external usb drive connected to my USB router (running dd-wrt). I have the router setup with samba and can read/write to it from any PC on the network. I have it setup to automount in Ubuntu. How can I access that mounted samba share when I SSH into the box? I want to cp or mv files from the PC to the Networked samba share via ssh CLI.

View 9 Replies View Related

Ubuntu Networking :: 10.04 - Accessing Samba Shares From Applications?

Jan 4, 2011

I have a NAS running Samba. My Samba shares are accessed from a Windows computer, it works very well.

With the kubuntu 10.04 computer, things are different : I can see the Samba shares in Dolphin, and copy files to the local drive, but lots of applications don't allow me to open a file on a Samba share.

Some applications such as OpenOffice let me browse to the share but refuse to open the remote file

Some other applications don't let me browse to shares at all.

What's up with that ? Surely I'm not the only one wanting to access files on a NAS ? How do other people do it ?

PS I chose kubuntu 10.04 because the 10.10 install hangs, the "ui" workaround I saw here and there did not work, the only solution offered was to go back to 10.04

View 3 Replies View Related

Networking :: Samba Requesting Password When Accessing Shares ?

Apr 2, 2010

I'm trying to do the normal setup of sharing some dir's on my linux machine using samba, to allow a windows laptop to access them.

I've managed to get the printer shared and this is allowing to send print jobs, which come out beautifully! however the actual file shares still aren't accessible

Depending on my settings, if I have security = user then when I access from the windows machine I get a username and password box - I dont want this functionality, I want the system to access right away as it would between two windows shares.

If i change security = share then it simply lists the shares, but tells me they are all inaccessible.

I've googled and searched here, tried various different things but I just can't see why/where its asking me for the username/password combo.

Code:

From /var/log/samba/smbd :

Code:

View 5 Replies View Related

Hardware :: No Form Feed After Printing Short Form?

Aug 13, 2010

We are using several printers on our Linux RH network to print customer invoices and receipts. Receipts are short forms of just 21 or 22 lines. Two of the printers (an HP LJ1300 and a Dell 5200) eject the receipt paper automatically; the other two HP (a LJ 4200 and a LJ2420) do not eject. You have to press the green button on the printer. Is there a solution to that? They are all set up with the same PCL settings.

View 3 Replies View Related

Debian Configuration :: Long Delay In Accessing SAMBA Shares

Jan 27, 2016

When I boot up, or come out of standby, etc, it takes about a minute for my Windows shares on Win 7 to show up under Network. Is there anything I can try that will make this initial connection faster? Either on Debian or the Win7 machine? I have the latest Debian vanilla. This is over wifi. My other devices list the shares right away.

View 1 Replies View Related

Software :: Samba Install On RedHat ES 5.5 64bit Edition

Nov 4, 2010

I have redhat ES 5.5 64bit edition and I'm trying to install samba using the DVD I installed the software with - however this is failing the dependency checks, am I installing the wrong software or something?

[root@localhost samba]# ls
PERL_CONVERT_ASN1_0_20_1_1_.RPM SAMBA3X_CLIENT_3_3_8_0_51_E.RP SAMBA3X_DOMAINJOIN_GUI_3_3_ SAMBA_COMMON_3_0_33_3_28_000.RP
SAMBA_3_0_33_3_28_EL5_X86_6.RPM SAMBA3X_COMMON_3_3_8_0_51_E.RP SAMBA3X_SWAT_3_3_8_0_51_EL5.RP SAMBA_COMMON_3_0_33_3_28_EL.RP
SAMBA3X_3_3_8_0_51_EL5_X86_.RPM SAMBA3X_DOC_3_3_8_0_51_EL5_.RPM SAMBA_CLIENT_3_0_33_3_28_EL.RP

Here's what I'm running.
Code:
for pkg in 'ls'; do rpm -i $pkg; done;
This is just rpm's I've grabbed directly from the disk.

View 1 Replies View Related

Networking :: Samba Server Configuration - Error

Jul 19, 2010

I am trying to configure samba server on my linux RHEL 5 box to windows 2000 NT boxes but getting the following error

Global parameter guest account found in service section!
[2010/07/16 16:01:13, 0] lib/util_sock.c826)
bind failed on port 139 socket_addr = 0.0.0.0.
Error = Address already in use

View 1 Replies View Related

Server :: Samba: Simple Error With NET RPC JOIN

Jan 29, 2010

I try to setup a client (for password /etc/passwd) to my samba server, without using the kerberos. let's make it simple: just samba. here are the errors: I have installed winbind, portmap, and samba/smbclient packages on the workstation linux ubuntu , which is intended to be client to samba for /etc/password attached to the server. At boot nothing changed, and the /etc/password is not attached to samba. So my passwords are stil the local of hte client, and not the server. This is my config of the client workstation:

[code]...

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved