Ubuntu Servers :: Streaming From HP Proliant Dl360G4P
Mar 5, 2010
I currently have my ftp server running off of my hp dl360. Ubuntu 9.10 server. I cannot seem to stream anything. I can use WINS and mount the share and then watch videos over my LAN like that but I want to stream my media over the internet, I already have a domain and NAT 100% set up with port forwarding. The snag I am hitting is I cannot seem to get streaming to work over the net.
the stats on the DL360g4p (1u rackmount) are as follows
1x Xeon 3.08GHz - 512MB cache
2 GB RAM
2x 300GB SCSI @ 10k RPM in raid0.
gigabit NIC
ubuntu 9.10 server
All web(http/ssh) traffic is forwarded to seperate ubuntu server VM running ontop of ESXi on a different 2u HP proliant dl380g3. All ftp/smb traffic is forwarded to the 1u dl360. I have tried vlc -I http (port 8080 redirected to ftpserver) under a detatched screen window and it failed to initialize video driver. I have an entire Directory that I would like to make available to stream.
View 7 Replies
ADVERTISEMENT
Jun 23, 2010
I am about to install ubuntu 10.04 to our DL160 g6 servers with p410 raid card. From the ubuntu validated hardware list, I can see that this hardware is validated to only 9.04. : [URL]..Nearly all other models are validated to 10.04. Have anyone tried using dl160 g6 with 10.04? What kind of problems we might face while trying?
View 2 Replies
View Related
May 17, 2010
I have a problem installing Ubuntu on an HP Proliant ML115. This server has a 1TB mirrored RAID setup (and 1 250GB drive), problem is, Ubuntu apparently doesnt like it, it detects the RAID but fails to partition the hard drives and the installation cant continue. I tried the guided partitioning using the whole disk (detected RAID array). Here is what syslog gives me:
May 17 22:32:30 main-menu[504]: INFO: Menu item 'disk-detect' selected
May 17 22:32:30 net/hw-detect.hotplug: Detected hotpluggable network interface eth0
May 17 22:32:30 net/hw-detect.hotplug: Detected hotpluggable network interface lo
May 17 22:32:31 hw-detect: Loading PCMCIA bridge driver module: i82365
May 17 22:32:31 hw-detect: FATAL: Module i82365 not found.
[Code]...
PS: Im very noob regarding this kind of stuff so detailed instructions please, also feel free to give configuration tips
View 6 Replies
View Related
Jun 26, 2010
I got my hands on my first real server hardware yesterday - a PIII 600 MHz COMPAQ Proliant 3000 with 1.8 GB RAM, Smart Array 3200 controller and 4x18.2GB SCSI ULTRA 3 hard drives. RAM is upgraded from original and USB card added - otherwise hardware arrangement appears to be original.
Minimal 10.04 installed (35 minutes boot to boot) as Server 10.04 could not detect CD drive. My problem? Everything works but it does not look right. Probably my bigger problem?? I know almost nothing about RAID and the more I read the more ethereal my understanding seems to become.
When installing, I chose to install with LVM on c0d0. Grub written to MBR. I have posted df -l, fdisk -l and lshw output below. Would someone tell me if this looks correct and, possibly, offer some pointers if it does not.
Code]...
View 1 Replies
View Related
Nov 2, 2010
installing Ubuntu 10.04 on a HP Proliant DL180 G6, especially via the LO100 virtual KVM? I can boot almost any linux distro with it, but unfortunately whenever I boot the Ubuntu server cd the screen gets garbled. I did some searching on the net, and found some references to older versions of Ubuntu where one had to add vga=771 to the boot options, but this still doesn't work with 10.04. I tried several vga modes, all to no avail (with vga=normal the screen gets garbled, with anything else the screen just stays black). Anyone got any idea on how to fix this?
View 1 Replies
View Related
Aug 3, 2011
I've installed Ubuntu Server 11.04 64-bit on an HP Proliant Microserver. The install seems fine but I'm having a start-up problem. When I boot the server, I get a blank screen after the Grub Menu. If I press ALT-F2 I get the login prompt. I've tried editing the grub file (after having done some googling) and tried adding nomodeset to the following line in the grub file:
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset acpi_osi=Linux"
I added nomodeset as well as acpi_osi=Linux to see if that would do somethng. After adding nomodeset, when I boot the server, I still get a blank screen after the Grub menu but this time a blinking cursor. Again, if I press ALT-F2 the login prompt shows up. So it boots (I'm able to putty/Webmin in even when the screen is blank) but don't know why I need to press ALT-F2 all the time to get the login prompt to appear. Plus I don't see the boot process right before the login as well.
HP Proliant has the following chipset and processor:
- AMD RS785E - north bridge, core logic controller
- AMD SB820M - south bridge
- AMD Athlon II NEO Processor 1.3 GHz Dual Core
I've also tried adding xforcevesa instead of nomodeset and that option too leaves me with a blank screen.
View 9 Replies
View Related
Jun 7, 2010
I'm having a great deal of time getting Lucid Server up and running on my Compaq Proliant ML330 G2. I've put a thread up in installing and upgrading, but people there don't seem to have any ideas about my problem. Since I figured there would be a higher concentration of server users here,
I've got a Proliant ML330 G2, 2 1.4 GHz PIV's
A dvd and CD drive on IDE1 (I'll explain why in a moment
A 65 gb hdd on IDE2
and four 40gb hdd's on hardware ide raid.
I've tried everything, but I can't get the sucker to boot. Installing to the raid array doesn't work. Some array setups won't partition, and others aren't even recognized as arrays. I've tried disabling the raid array and installing to the IDE hdd (my original intention) but I just get bad system disk errors. It would be exceptionally helpful if anyone has one of these boxes, or has worked on one, but I'm willing to take advice from any direction at this point.
View 3 Replies
View Related
Mar 29, 2011
I have a Compaq server, as per the title, and I wish to install Ubuntu Server onto it but ran aground when I found it got to trying to run the installer after the CD Boot menu, it just stopped there, waited 180 seconds (as per the error's details) and then locked up with the Caps Lock & Scroll Lock lights on the keyboard flashing.
Now I know it's not the server, as I have installed other OSes onto it in the past, including an older version of Ubuntu server (9.04), I did try and re-install the 9.04 version but the CD I had was too scratched up and got to a point in the installer (copying files) where it just failed cos it couldn't read the disc.
The specs of the thing are:
Dual PentiumIIIs 1.4GHz
512mb RAM (keep meaning to upgrade it)
3x 18.2GB 10k SCSI HDDs (Storage)
[code]...
Not sure what else is in there, but the full specs are on the web...
View 8 Replies
View Related
Jun 1, 2011
I acquired an old ML370 Proliant server, and I'm attempting to find a way to control the fan speed, as all three noisy fans are running at full blast, and I had planned to keep this thing in the office, because it has no wireless capability or support.
I know the following:HP has a suite of programs that are variously called Insight Control Manager, Server Health driver, HP-health, hpasm, and a few more I can't remember. Obviously these are different iterations of the same program, but I have been unable to determine which one I need, and I've been completely unable to find a way to install any of them or find the repository that contains them.
The website: Download Drivers and SoftwareIt lists a lot of different Enterprise-class Server OSes, but nothing about Ubuntu or any home server OSes. I've only been at this for a week, so I don't know which of these would work with Ubuntu Server, or how to make them work if their aptitude file extension is not .deb. I'm currently running Server version 10.10, as 11.04 gave me monitor troubles.
View 2 Replies
View Related
Jul 12, 2011
I'm trying to get the HP Proliant DL120 G6 server a lot quieter after startup under Ubuntu Server 11.04 (x64).
For now, it seems like there is no fan control at all: when I start the server, the fans start running at max speed, then it slightly lowers to 3.5K-5K RPM. Once there, it never goes down or up. There's just no fan or power control at all.
In no specific order, I will describe as much as I can my situation.
The system is IPMI 2.0 compliant, so when using the ipmitool package I can get the values of the sensors like this:
Code:
I tried to follow the procedures for using the fancontrol package together with lm-sensors, as shown at [url]. One of the very first steps is to launch "sensors-detect", which gives:
Code:
View 8 Replies
View Related
Apr 23, 2009
I'm wondering if I could put my old DualCore PCIe Board into a Proliant 3000? Why not; I mean, the Array Controller should plug right into the PCI slot on the DualCore board. Of course, I'll have to shoehorn a second power supply into the case for the newer Board, but wouldn't it be a monster! Two 3GHZ Processors, with a 256 MB nVidia graphics card, 1.5 GB of RAM, and 8 Hard Drives! (7, actually, because one of them doesn't work). I'm up late, and I think I'll start working on it right now.
View 1 Replies
View Related
Aug 2, 2011
I have an ML570 G4 with a P400 array card. Ubuntu server 10.04. I added more drives and extended the size of the partition to 2048gb. Now on boot I get Grub Error 18. The live cd sees the partition I just cannot boot it. I've googled around quit a bit,but have not found much that is relevant. I believe I am going to be adding a smaller boot partition to the beginning of the drive to fix this
View 2 Replies
View Related
Jan 4, 2010
I don't know why, but I can't seem to just play video files (stream them) directly through the internet using MPC or any other media player. It is a bit weird, because I think I was able to just a month ago. I have made some changes to the general setup of the apache server, but nothing major, and I have no chance of reversing it all.
Instead, when I try opening the url using "Open file" it doesn't just open it an begin playing from the internet, but instead appears to be frozen. However, If I let it be "frozen" long enough, it will eventually play the file, indicating that it has downloaded the entire file to a temp location on the hard drive.
Is it something with the permissions? Actually, I went and made everything in /var/www/ 777, as it is not known by a domain name or registered anywhere. I am just connecting though my IP address as the server is located locally. Even this didn't help.
View 9 Replies
View Related
Feb 9, 2010
i have a Ubuntu 8.04 Server, with Media Tomb installed for streaming to the PS3. Works fine, its just a little buggy and you cant really customize it. For instance the web interface looks feels and works like it was made 10 years ago, and it dousn't give any feedback of directroys being scanned, so you have no idea what's being scanned and what's isn't!. Is there another WEB gui for managing MediaTomb? or is there another way to steam to the PS3? i have Webmin installed if theres set-up methods through that.
View 2 Replies
View Related
Feb 28, 2011
I have an old PC that I turned into a server. I have Ubuntu 10.04 running on it. I am looking for some media server software that can stream .mp3s to multiple computers over a LAN. But, I would like a software that can stream through a web interface. I would like my family to be able to open a web browser and go to the server and play files by clicking on them.
View 5 Replies
View Related
Feb 23, 2010
Anyone know if you can use samba to share a folder to stream music and video files to a wireless enabled dvd player? I have a machine running Ubuntu server and have all my music stored and shared using nfs with my network computers. I just got a Samsung BD-P3600 blu-ray player that has wireless for blockbuster, netflix, pandora, and you tube. You can also setup a shared folder on a Windows system to allow play back on the blu-ray player. I was just wondering if anybody has tried it with ubuntu and samba.
View 1 Replies
View Related
Feb 27, 2009
I brought a TV card and installed on Fedora 9.Want to know how to make it as a streaming server?
View 4 Replies
View Related
Aug 10, 2011
I've got an old laptop with F15 installed. I want to use it together with two usb-webcams to monitor my wood boiler in the basement. And I want to stream it via http. I tried zoneminder and it didn't found my cheap cams. I tried vlc but it didn't work that well. Are there any other options to put out the streams on a webpage? Sent from my Transformer TF101 using Tapatalk
View 3 Replies
View Related
Aug 9, 2010
I have multiple video streaming servers(Red5 running on machines internally on LAN. For different subdomains.Ubuntu 10.04 The front end to the is apache2 on a Bastion Host. To be able to reach the streaming server I embed a javascript in HTML pages as follows
Code:
<embed .....
var="rtmp://site1.my_domain.com"
>
[code]....
how will I make sure this rtmp request is mapped to a port different than 1935 as there are three other streaming servers which are also to respond to their respective requests.
View 1 Replies
View Related
May 26, 2009
I successfully installed darwin streaming server .. I stream Audio through internet well but videos I can stream locally in my network only .. when I am connected to internet outside my network .. it doesn't stream I think their must be ports opened for that .. or any 1 have any ideas .. the audio is streamed on port 8000 .. video is streamed on port 7070 but locally only .. I opened those 2 ports in my router only the audio is working .. also I opened ports 554,7170 disabled the firewall of the router .. is it a problem of ports or something else .
View 2 Replies
View Related
Sep 1, 2011
i am trying to install Ubuntu 11.04 on HP proliant DL 360 G6 but it fails at the time of iso_scan. /var/log/syslog shows "failed mounting /dev/sda" and menu item iso_scan failed i dont know how to solve this problem its urgent. On server RAID5 is configured
View 1 Replies
View Related
Jan 8, 2010
Have an HP Proliant DL360 server on which I plan install Fedora 12.
I need to download the NIC driver from HP's site - but it asks which operating system - and Fedora is not on the list. However, many variants of Red Hat Enterprise Linux are on the list.
What is a good choice for OS that would match up with Fedora?
View 3 Replies
View Related
Jul 1, 2011
I've installed both Fedora 15 x64 and Fedora 14 x64 on an HP Proliant DL380 G4 with the HP SmartArray SCSI controller, 2x146GB UW320 SCSI drives.The server was running RH v4 with a hardware RAID 1 with uptime of 400+ days with no issues.I broke the HW RAID and made 2x volumes and software RAID. I have another identical server with 4x 146GB UW320 SCSI drives with Fedora 12 x64 and SW RAID, so I figured 14/15 should be the same process.What happens is the server runs great for a while, but when I leave it for a few hours, it becomes non-responsive. I've re-installed 15 and 14 multiple times now and also installed NRPE, which shows load increasing to the point to where the server is non-responsive. It hits high load levels (as reported by NRPE). The load levels appear to be increasing over time. Such as last night:
log off at midnight, load average 0/0/0
2:03 am - WARNING - load average: 9.91, 8.85, 6.75
3:03 am - WARNING - load average: 16.91, 15.86, 14.47
[code].....
View 4 Replies
View Related
Jan 29, 2010
We have purchased Hp Proliant DL 380 G6 server after Raid 5 configuratin when i boot server from fedora or redhat bootable cd and i select "install fedora", after this installation cd is not able to detect hard drive or not able to copy required file in server.
View 3 Replies
View Related
Dec 29, 2010
HP Proliant Server will not boot to O.S. Upon power-up system performs POST and finally starts looking for bootable device...3 are listed CD-ROM, ?, SCSI.
And then falls into a loop here. No errors that I recognize (I'm newbie to LINUX). Server has 6 SCSI drives and using the SMART START CD, are testing ok. I've broken down box to minimum hardware requirements and was even trying to boot in Safe Mode, if there is even such a thing for Linux.
View 14 Replies
View Related
Apr 22, 2010
Has anyone installed Lenny successfully on the HP Proliant ML150 G6 platform?
View 2 Replies
View Related
Feb 12, 2010
i can find this Hardware for Linux - Compaq Computer (by ATI Technologies) / Proliant Rage XL but where do i download these drivers?
View 2 Replies
View Related
Oct 28, 2010
I cannot seems to get my server to access the internet even though I can easily managed to do stuff inside my LAN. I can ping the server on the W7 Computer and vice versa, as well as access it via SSH while inside the network.
Network Map:
Quote:
Modem
|
D-Link Router
| |- Various Network Devices
|
[Code].....
View 3 Replies
View Related
Jan 20, 2011
I have been loading Red Hat OS 5.5 x86_64 version in HP's Proliant DL 380 G7. One of the Server's after triggering the iLO and setting the Server to the determine the hostname so that, it can check the eth0 settings and then it probes for the video adapter, the screen goes completely blue and the characters that are on the screen at this point are not readable at all..Looks like to me the screen is throwing the system characters completely leaving no trace of what's going on. The screen is blue with those characters and the server is freezing...Looks like a hardware iLO issue, but not sure. When I restarted the server, it picked up the PXE boot and loaded windows upto the serial key and all that loading process was readable.
View 5 Replies
View Related
Jan 8, 2010
I have One Server HP proliant Ml150 G5 with ARRAY Controller and I want to INSTALL REDHAT9 But OS When I install REDHAT9 IT gives NO hard disk Found ON HP SITE there is no driver for array controller for REDHAT9
View 5 Replies
View Related
