I have an old PC that I turned into a server. I have Ubuntu 10.04 running on it. I am looking for some media server software that can stream .mp3s to multiple computers over a LAN. But, I would like a software that can stream through a web interface. I would like my family to be able to open a web browser and go to the server and play files by clicking on them.
View 5 RepliesI don't know why, but I can't seem to just play video files (stream them) directly through the internet using MPC or any other media player. It is a bit weird, because I think I was able to just a month ago. I have made some changes to the general setup of the apache server, but nothing major, and I have no chance of reversing it all.
Instead, when I try opening the url using "Open file" it doesn't just open it an begin playing from the internet, but instead appears to be frozen. However, If I let it be "frozen" long enough, it will eventually play the file, indicating that it has downloaded the entire file to a temp location on the hard drive.
Is it something with the permissions? Actually, I went and made everything in /var/www/ 777, as it is not known by a domain name or registered anywhere. I am just connecting though my IP address as the server is located locally. Even this didn't help.
i have a Ubuntu 8.04 Server, with Media Tomb installed for streaming to the PS3. Works fine, its just a little buggy and you cant really customize it. For instance the web interface looks feels and works like it was made 10 years ago, and it dousn't give any feedback of directroys being scanned, so you have no idea what's being scanned and what's isn't!. Is there another WEB gui for managing MediaTomb? or is there another way to steam to the PS3? i have Webmin installed if theres set-up methods through that.
View 2 Replies View RelatedI currently have my ftp server running off of my hp dl360. Ubuntu 9.10 server. I cannot seem to stream anything. I can use WINS and mount the share and then watch videos over my LAN like that but I want to stream my media over the internet, I already have a domain and NAT 100% set up with port forwarding. The snag I am hitting is I cannot seem to get streaming to work over the net.
the stats on the DL360g4p (1u rackmount) are as follows
1x Xeon 3.08GHz - 512MB cache
2 GB RAM
2x 300GB SCSI @ 10k RPM in raid0.
gigabit NIC
ubuntu 9.10 server
All web(http/ssh) traffic is forwarded to seperate ubuntu server VM running ontop of ESXi on a different 2u HP proliant dl380g3. All ftp/smb traffic is forwarded to the 1u dl360. I have tried vlc -I http (port 8080 redirected to ftpserver) under a detatched screen window and it failed to initialize video driver. I have an entire Directory that I would like to make available to stream.
Anyone know if you can use samba to share a folder to stream music and video files to a wireless enabled dvd player? I have a machine running Ubuntu server and have all my music stored and shared using nfs with my network computers. I just got a Samsung BD-P3600 blu-ray player that has wireless for blockbuster, netflix, pandora, and you tube. You can also setup a shared folder on a Windows system to allow play back on the blu-ray player. I was just wondering if anybody has tried it with ubuntu and samba.
View 1 Replies View RelatedI brought a TV card and installed on Fedora 9.Want to know how to make it as a streaming server?
View 4 Replies View RelatedI've got an old laptop with F15 installed. I want to use it together with two usb-webcams to monitor my wood boiler in the basement. And I want to stream it via http. I tried zoneminder and it didn't found my cheap cams. I tried vlc but it didn't work that well. Are there any other options to put out the streams on a webpage? Sent from my Transformer TF101 using Tapatalk
View 3 Replies View RelatedI have multiple video streaming servers(Red5 running on machines internally on LAN. For different subdomains.Ubuntu 10.04 The front end to the is apache2 on a Bastion Host. To be able to reach the streaming server I embed a javascript in HTML pages as follows
Code:
<embed .....
var="rtmp://site1.my_domain.com"
>
[code]....
how will I make sure this rtmp request is mapped to a port different than 1935 as there are three other streaming servers which are also to respond to their respective requests.
I successfully installed darwin streaming server .. I stream Audio through internet well but videos I can stream locally in my network only .. when I am connected to internet outside my network .. it doesn't stream I think their must be ports opened for that .. or any 1 have any ideas .. the audio is streamed on port 8000 .. video is streamed on port 7070 but locally only .. I opened those 2 ports in my router only the audio is working .. also I opened ports 554,7170 disabled the firewall of the router .. is it a problem of ports or something else .
View 2 Replies View RelatedI am having trouble setting up my second network interface on Ubuntu Server 10.04. When setting up the machine it did detect both cards but I only picked one to configure, and now I want to setup the second.
I went into /etc/interfaces and basically copied the settings for eth0 but changed the IP and the name to eth1. I then restarted.
Quite honestly it might be working! But when I run ifconfig -a I see no packets I see
Quote:
eth1 Link encap:Ethernet HWaddr 00:0e:0c:59:af:c4
inet addr:192.168.4.21 Bcast:192.168.4.255 Mask:255.255.255.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[Code].....
isn't that what "UP BROADCAST...." line means?
So perhaps my question is how do I test my 2nd interface? I tried using the 2nd IP with Putty (which is how I usually work on the machine) and couldn't connect.
I have a server with two active network interfaces. On one, I need ssh open for all users (it's running LTSP, and as I learned the hard way today, blocking ssh kills LDM access).
On the other interface (which connects to the rest of the network), I only want to allow a few administrative users to connnect.
Is there a way to do this cleanly using sshd_config or PAM? I don't want to do something hacky like running dropbear.
Is there any web interface that I can install to remotely reboot ubuntu? It would only be accessible via a VPN or on the LAN so not too much worry over security.
View 3 Replies View RelatedAlright, here's the problem: I have a server going that was running 10.10, then upgraded to 11.04 with no problems, but when I reinstalled 9.04 (so i could muck around with GNUPanel), the install couldn't find the ethernet on the motherboard (which I had no problems with on 10.10 or 11.04). I'm a bit of a newb, but it seems to me that something is very wrong here because I can't get online. All of the other computers in my house are unaffected, so I think I can narrow it down to the device not being recognized, but beyond that, I'm lost.
View 3 Replies View RelatedI want to set up a home computer as server. I've installed Ubuntu Server Edition 10.04, and can access it through SSH. However, I would like to have a browser based interface for managing things, such as installing a phpBB forum and stuff like that. Also, I want my friends to be able to share files on my home server as well. I know I can do it by using FTP, but I would rather not have them to install a FTP program.
View 9 Replies View RelatedI have installed ubuntu server 10.04 sucessfully. But I'm new to ubuntu so I need graphical user interface(GUI). How can I install gui in ubuntu server 10.04.
View 5 Replies View RelatedI'm having an odd problem with Server 10.04. I have two interfaces but only one interface is brought up on boot - and it's not always the same interface. Usually eth0 fails and eth1 comes up fine, but sometimes eth1 fails and eth0 comes up. I'm using the same config that was previously used on Server 8.04, but never had this problem on 8.04.
/etc/network/interfaces:
Code:
# The loopback network interface
auto lo
iface lo inet loopback[code]....
Once the system has booted, if I run /etc/init.d/networking restart, then both interfaces come up fine. However, having read that this is now an upstart, I also tried service networking restart, but get:
Code:
restart: Unknown instance:
Don't know if that's significant or not.
Cannot find a single problem with networking reported in log files, other than bound services failing to start as a result of the interface not being up (dansguardian, squid, dhcp which are all bound to eth0, and therefore fail when eth0 doesn't come up. And when eth1 doesn't come up, the only process that fails to run is clamav-freshclam). Although at one point I did see something about interfaces being renamed which seemed a little odd.
I could just have networking restarted automatically once booted, but this obviously isn't a solution to whatever is causing the problem. There is quite a bit running on the server: Samba/LDAP domain controller with roaming profiles, squid & dansguardian with LDAP auth, postfix & dovecot with LDAP auth, mailscanner, dhcp & ddns, strict iptables policy with nat... so I'm not sure if any of those could have any bearing on interfaces?
2011-04-11 11:57:03 UTC I don't know what happening with my centralized log-server running octopussy. Currently it is working in a vmware setup with approx 980 Mb ram and is set in bridge mode. Currently is it set to receive logs from logs devices which are 4 in number one of which includes the core isg-1000 device. This setup is still in its test form....now what happens after some time (sometimes it taken days and sometimes just hours) when the connection (https) is suddenly lost to the apache and i can no longer access the interface. What happens more strangely my Ethernet interface gets shutdown on ubuntu. I have to restart the services by issuing /etc/init.d/networking restart.
Even at times it itself start receiving network packets on its own; without even restarting; i don't what the hell is wrong with the server. I cannot understand its erratic behavior. I need a sound and reliable Ethernet connectivity at all times because coz of loss of connectivity in my case would mean loss of logging functionality. I dnt want any time-gap in logging ...as im currently logging some highly critical devices on this server.
On Ubuntu Server 10.10 the second bond device won't come up. Someone please advise the correct configuration. Error message when I run /etc/init.d/networking restart:
Code:
SIOCSIFADDR: No such device
bond1: ERROR while getting interface flags: No such device
SIOCSIFNETMASK: No such device
SIOCSIFBRDADDR: No such device
bond1: ERROR while getting interface flags: No such device
bond1: ERROR while getting interface flags: No such device
Failed to bring up bond1.
[code]...
I succeeded to install Postfix on my box. I also installed mailman.I don't understand what mailman do. It's similar to SquirrelMail? If no can you guys recommend a web interface mail client like SquirrelMail?
View 1 Replies View RelatedI've set up a FTP server, but now I would also give the ability to users to access file through a web interface, like the ones you can find in many NAS.I there anyone that knows a software that do this? I can't find nothing useful.
View 5 Replies View RelatedI'm trying to setup nagios, and I've looked at several guides but none of them seem to address my problem.Here's the clearest guide that I followed URl...I followed all the instructions on that basica guide, except disabling SELinux. I changed SELinux rules based on URL...I'm not getting any AVC Denials, so that's not the problem. Nagios and Apache both start fine. If I go to my local IP, I get the standard Apache test page. URl...(address from all the guides I read) doesn't resolve.I know that Nagios is at least running from "service nagios status," and I have gotten two alerts emailed to me: swap alert (I don't have swap configured) and disk space.
View 5 Replies View RelatedI tried to install VPN server/client on my Linux machines. But the instruction document mentioned: "The following should work (assuming your outside interface is eth1 and your inside interface is eth0):". What is " outside interface" and what is " inside interface"
My machine showed this:
ifconfig -a
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:112 errors:0 dropped:0 overruns:0 frame:0
TX packets:112 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:7392 (7.2 KiB) TX bytes:7392 (7.2 KiB)
p2p1 Link encap:Ethernet HWaddr 00:21C:42:A4:19
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
Interrupt:43
wlan0 Link encap:Ethernet HWaddr 90:4C:E5:68:91E
inet addr:192.168.1.225 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr: fe80::924c:e5ff:fe68:91ce/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3999383 errors:0 dropped:0 overruns:0 frame:0
TX packets:2067232 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1021542186 (974.2 MiB) TX bytes:177511017 (169.2 MiB)
I am looking for a program with a web interface to show my servers hardware status. hdd usage, cpu load, memory etc.
View 2 Replies View RelatedI had installed apache previously on my system, and I think I uninstalled it completely, although remnants might have remained. I have just installed zend server ce php 5.3, and I am having trouble getting it to work. When I log in to the admin interface, it told me it couldn't start the webserver, so I go to restart apache, and it gives me this:* Starting web server apache2 Syntax error on line 6 of /etc/apache2/sitesenabled/zendserver_gui.conf:Invalid command 'php_admin_flag', perhaps misspelled or defined by a module not included in the server configurationThis has to do with php_mod some how... but I am not sure how to fix this, or where to start, since I am relatively new to actually setting up apache.I thought this might have something to do with libapache2-mod-php... so I went to reinstall it, and ran this:
mburns@mb2449-laptop:~$ sudo aptitude install libapache2-mod-php5
Reading package lists... Done
Building dependency tree
[code]....
I just had an ATT Uverse RG installed. However my Smoothwall router that previously worked fine with the ADSL SpeedStream is no longer accepting an address assignment DHCP ip address from this new gateway. (3800HGV-B)Any thoughts ideas or experience working with this hardware? ATT only supports Windows and Mac
View 2 Replies View RelatedI have a ppp0 entry with post-up options like this
mapping ppp0
map none photon-plus motorola
map timeout: 12
[code]...
i am using windows 7 in my laptop and linux is installed on virtualBox but my problem is the screen is showing small in virtualbox is there any way to enalarge the screen to show like windows screen? i did before by using VGA setting but it made problem me i was not able to use GUI interface i meant graphics interface
it was just showing me Command Prompt.
When I do...# iptables -L...I see rules in my INPUT and OUTPUT chains that look scary:ACCEPT all -- anywhere anywhere...but these rules only apply to the loopback interface. I tested it and the server cannot be reached on open ports from the outside world. How can I make iptables show the interfaces that the rules apply to?Otherwise, every time I do iptables -L it will scare the crap out of me.
View 3 Replies View RelatedI found multiple sites explaining how to add IPs to a network interface as virtual interface like eth0:0. However I can add IPs to an interface as well using the ip command: ip a a 192.168.2.2/24 dev eth0 What I want to know is how I can make this persistent on rhel/centos.
View 2 Replies View RelatedThe following are the output of command "ifconfig -a":
[Code]....
The interface "eth0", which is down, was not displayed, but loopback interface has been displayed. So, how can I make my application display all interfaces, including the interfaces which are down, but excluding the loopback interface?