Ubuntu Servers :: Php AddHandler Error - Invalid Command 'AddHandler'

Dec 2, 2010

I'am currently trying to create my own httpd file to set up a web server. I'am struggling with the error and i can't find out how to resolve it :

[code]...

View 4 Replies


ADVERTISEMENT

Ubuntu Servers :: Starting Apache / Getting Error Invalid Command?

Oct 20, 2010

I am trying to install Zend Server, and that went well. Apache and all the other items were installed.

But when I go to start Apache, I get this error:

Quote:

root@laptop:~# /etc/init.d/apache2 restart
* Restarting web server apache2 Syntax error on line 6 of /etc/apache2/sites-enabled/zendserver_gui.conf:
Invalid command 'php_admin_flag', perhaps misspelled or defined by a module not included in the server configuration
[fail]
And on line 6: php_admin_flag tidy.clean_output off
The rest of the file is below:

Quote:

# Warning: Modifying this file will break the Zend Server Administration Interface
Listen 127.0.0.1:10083
NameVirtualHost 127.0.0.1:10083
# do not allow override of this value for the UI's Vhost as it should always be off when generating non-html content such as dynamic images
code....

View 1 Replies View Related

Ubuntu Installation :: Grub And 9.04 - Error "invalid Command" Or "invalid Execution Format"

Aug 16, 2011

Bottom Line: Dvd Drive died in my toshiba laptop and it was replaced (not before tech for some reason reformatted the Win7 partition... which was 100% un-needed, but thats beside the point now. I redid win7 (the tech installed vista) and am TRYING to "redo grub". Facts: The Slackware AND Ubuntu Partitions ARE STILL THERE and when i use SuperGrub Boot CD (which doesn't restore my grub by itself) to boot into slackware, i can see ALL THE CONTENT of both Linuxes still there including grub on ubuntu partition

(Tri-Boot: Ubuntu, Slackware, and WIn7) I had it working for two years or so, SO i know this "setup" works fine. I am A) Trying to do this as simply as possible. B) Trying to avoid the need to download a 800MB ISO (as seen for this issue on this forum) and trying not to have to reformat Ubuntu Partition (though I have the .Debs I have downloaded for it backed up ... all 1.7GB of them) I have /dev/sda1 as win7, /dev/sda2 as Slack and /dev/sda3 as Ubuntu (which contains Grub Legacy).. Every command I do seems to result in an error like "invalid command" or "invalid Execution format " (i think that second one is right) type errors. I compiled (awhile back) a few kernels for Slackware, but feel goofy that I cant figure what i this out (what i thought was going to be a "2 minute" fix)

View 4 Replies View Related

Ubuntu Servers :: Apache2: Invalid Command 'PHPINIDir', Perhaps?

Apr 19, 2011

I've recently been trying to secure my Apache2 server running suPHP on an Ubuntu 10.10 box. My ideal solutions are to

1) Specify a specific php.ini on a per virtualhost basis. I have tried using the PHPINIDir directive inside a virtualhost block in my 'sites-available/default' file, but the parser throws an error

Invalid command 'PHPINIDir', perhaps misspelled or defined by a module not included in the server configurations I have figured out that the reason this directive is not recognized is because my server is running mod suPHP instead of mod php5. The default site on the server requires suPHP to perform certain administrative functions. First question would be, is there some other way to specify a specific php.ini besides using PHPINIDir, or does anyone have any ideas of how to get PHPINIDir to be understood under the current configuration?

2) Activate/Deactivate php5 on a per virtualhost basis. This will allow me to use PHPINIDir to specify a specific and secure php.ini. I know that I have php5 installed, as 'a2enmod php5' with a restart will activate php5 and override suPHP. Does anybody know what the commands would look like to load the php5 modules from inside a virtualhost block? I have looked around on the internet and found these two lines of code to add that will supposedly activate php5 under a virtualhost

LoadModule php5-module modules/libphp5.so
AddHandler php5-script php
I do not have a 'modules' directory in my /etc/apache2 folder, so I did a search for libphp5.so and found the only copy on my machine located in /usr/lib/apache2/modules. Naturally, I tried
LoadModule php5-module /usr/lib/apache2/modules/libphp5.so
AddHandler php5-script php
but received an error
apache2: Syntax error ...: Can't locate API module structure 'php5-module' in file /usr/lib/apache2/modules/libphp5.so

Surely I can't be the only one who's needed to specify different php.ini files for different virtualhost's while using suPHP, and I'd also have to assume I'm not the first one who's tried to integrate suPHP and php5 on a per virtualhost basis. Anyone have any ideas? I'm completely stuck, and that's the worst kind of stuck. The Apache2, suPHP, and php5 installations on my machine are standard for Ubuntu 10.10

View 1 Replies View Related

Ubuntu Servers :: Apache2: Invalid Command 'AssignUserId'?

May 5, 2011

I just reinstalled my server with Ubuntu 11.04 and I am now trying to put my websites back in place. The problem is that the configuration directive AssignUserId is no longer working. I simply get this:

Code:
root@silvertejp:/etc/apache2/sites-available# service apache2 startStarting web server apache2 Syntax error on line 12 of /etc/apache2/sites-enabled/finn:

Invalid command 'AssignUserId', perhaps misspelled or defined by a module not included in the server configuration This worked fine on Ubuntu 10.04. Should I install some module? How?

View 1 Replies View Related

Ubuntu Servers :: Invalid Command 'ProxyHTMLEnable', Perhaps Misspelled Or Defined By A Module Not Incl?

Jul 18, 2010

I am getting following error "Invalid command 'ProxyHTMLEnable', perhaps misspelled or defined by a module not included in the server configuration"

Saw this thread in /etc/apache2/mods-enabled/ I see

Code:
alias.conf authz_default.load autoindex.conf deflate.conf
dump_io.load mime.load proxy.conf proxy.load[code]...........

View 4 Replies View Related

Server :: Error Invalid Command 'AuthLDAPSubGroupDepth

Aug 26, 2010

i enabled LDAP authentication for group in apache2.2 is working fine. When i enabled sub group search using AuthLDAPSubGroupDepth 1 is showing error Invalid command 'AuthLDAPSubGroupDepth', perhaps misspelled or defined by a module not included in the server configuration here below the ldap coding for apache2 running in ubuntu 10.04

AuthzLDAPAuthoritative on
AuthType Basic
AuthName "xxxxx"
AuthBasicProvider ldap
AuthLDAPSubGroupDepth 1

[Code]...

View 1 Replies View Related

Programming :: KSH - Script Error - Invalid Command ?

Aug 3, 2010

Essentially my ksh script calls a program and passes some commands. It's entering the program just fine, but when it passes the commands it gets "invalid command" error, and loops for a bit.

When I run all the steps manually the program works fine. I turned debug on and see that it enters the program, cmbview, but for whatever reason, it fails on any command that it tries to parse.

Tried running it in a ksh shell, same error. Tried running it as bash shell, same error.

The cmbview exe works and the following commands work, so I can only assume its something with the script parsing the commands.

View 2 Replies View Related

Ubuntu Servers :: Error 13: Invalid Or Un Supported Executable Format?

Aug 4, 2010

Ubuntu 9.04 server (64bit)
8GB
(2) 320 WD HDD - RAID 1

After coming home one evening I found my server was turned off. My suspicions lead me to believe we had a storm and the power went off, then the UPS went off and finally at that point the server went off too. I think my server was set to allow security updates. After it turned of and restarted it seems it made a change to Grub and upgraded it to Grub2. In doing so I now get the following message:

Error 13: Invalid or un supported executable format

I have tried to do the following:

url

This solved the problem for me, from > url

Quote:boot from the live medium and chroot into the Linux installation:

$ sudo mkdir /mnt/linux
$ sudo mount -t ext4 /dev/sda1 /mnt/linux
code....

Then, the following command should resolve the issue. :

$ sudo grub-install --recheck /dev/sda

View 4 Replies View Related

Ubuntu Servers :: Getting Error - You Have Entered An Invalid Username Or Password

Apr 18, 2011

When I try to connect to my ubuntu server with my mac, I always get "You have entered an incorrect username or password, please try again". The same problem occured when I tried to connect to another mac server at my school. Is this a mac wide problem? Anyone else experienced this problem?

View 3 Replies View Related

General :: "Invalid Command" Error Running .sh Script

Jul 17, 2011

So what does it mean when I can run this command as root successfully from the command line (it will find all user.xml and zip):

But when I add it to a script (.sh) I get the error below:

Error:

View 4 Replies View Related

Ubuntu Servers :: "error 13: Invalid Or Unsupported Executable Format"

Dec 3, 2010

I run a small home/hobby server. I attempted to upgrade it this morning. It was previously using 8.04 lts. I followed the instructions found here, [URL].. Upgrade for Ubuntu Servers (Recommended) I followed the on-screen instructions. After the installation was complete, I rebooted the server. On start up, I was greeted by this message "error 13: Invalid or unsupported executable format." I have since tried booting into every 10.04 kernel listed. However, the results are the same. I have attempted to find a solution via web search, but have had difficulty finding a solution that is appropriate for my situation.

View 4 Replies View Related

Fedora :: Libata / Sg_utils - Error "DRIVER_SENSE - Invalid Command Operation Supported"

Jun 17, 2011

I used sg_sata_ident to get the IDENTIFY_DEVICE output on my SATA drive. The output shows the drive as being able to support READ_BUFFER/WRITE_BUFFER. However, when I issue sg_read_buffer /dev/sda, I get an error - DRIVER_SENSE - Invalid command operation supported.

View 2 Replies View Related

Server :: Http Error "Invalid Command 'JkSet', Perhaps Misspelled Or Defined By A Module Not Included In The Server Configuration"

Feb 11, 2011

I am running apache httpd-2.2.3-43.el5.centos.3 When i restart the http, it says the following error "Invalid command 'JkSet', perhaps misspelled or defined by a module not included in the server configuration "

Do I need to install anything like tomcat? or include any configuration setting in apache? kernel version: 2.6.18-194.32.1.el5

View 3 Replies View Related

Ubuntu Servers :: Cat Command Gives Error Permission Denied

Aug 28, 2010

I am using Ubuntu server edition 10.04.1 running in Vmware server 2.02.I am connect via Putty so I can use copy and paste.My first goal is configuring a ftp server using PureFtpd using this guide.In section 10 I need to write this command

cat /dev/null > /etc/pure-ftpd/db/mysql.conf

I am getting this error

almog@Testing:~$ sudo cat /dev/null > /etc/pure-ftpd/db/mysql.conf
-bash: /etc/pure-ftpd/db/mysql.conf: Permission denied

I tried with and without "sudo" and I am getting the same error.

View 3 Replies View Related

Ubuntu Servers :: Vsftpd Chroot, Creates 550 Error On CHMOD Command?

Jul 14, 2010

I've been searching the web, without finding any sollution to my problem.vsFTPd is acting really weird. I've never seen this problem before, and I've been using vsftpd for some years nowWell.. The thing is, I've made a user that chroots to the folder /var/www on my server. And when I then try to chmod the file /var/www/htdocs/testsite/index.html through my ftp-client, I only get the error "550 SITE CHMOD command failed.", and when I then check in my /var/log/vsftpd.log it says

Code:
FAIL CHMOD: Client "192.168.50.58", "/htdocs/testsite/index.html 777"
Which I think would mean that it tries to chmod the file "/htdocs/testsite/index.html" instead of chmod the

[code]....

View 7 Replies View Related

Ubuntu Installation :: 11.04 - Unable To Boot - Invalid Command

May 24, 2011

I recently installed Ubuntu 10.04LTS on my computer and realized I wanted to give 11.04 a try. So, using the Update Manager both times, I applied all updates then upgraded to 10.10 then to 11.04.

Here's where the problem starts. Grub loads fine. I choose Ubuntu. I briefly get a purple splash screen then a black screen with some text that looks like Ubuntu is trying to load (I've attached a picture of this screen). This screen flashes a couple times then stays up and nothing happens afterwards. I can input text and commands but I get no response. Not even an "invalid command". The only thing I can do is press CTRL+ALT+DEL and my computer will reboot.

I have Ubuntu installed alongside Windows 7 on a 50Gb partition (plenty right?), AMD 64-bit dual core processor, and an ATI Radeon HD 3200 graphics card. This is on an HP Pavilion dv3 laptop.

View 3 Replies View Related

Networking :: Invalid Argument With Iwconfig Command

Jan 31, 2011

I am trying to connect to a wireless network. I got a problem with network manager. So I try to connect manually

I found wireless network around by using "iwlist scan" command.

I want to connect to a network with ESSID "MCC(Mandalay)" and Key "mdymcctraining"

Here is my problem The output of "iwconfig" command is

Code:

What does it mean "invalid argument"? It means that my wireless pre-sharedkey is not correct? I am sure the key is valid. It is used by any others with window 7.

View 1 Replies View Related

General :: Cannot Run ARPD Command - Invalid Argument

Aug 17, 2010

I've a problem when I try to run arpd program to support my honeyd software but when I try to execute it then it shows this error message
./arpd 10.0.0.0/8
arpd: intf_get: Invalid argument
My arpd installation based on this tutorial [URL].

View 2 Replies View Related

Server :: Apache - Invalid Command 'SetEnvIfNoCase?

Jun 4, 2011

Apache is complaining about an error with SetEnvIfNoCase when I tried to start it. I've checked that the module /usr/local/apache2/modules/mod_rewrite.so exists. Also the 2nd code block below shows that I'm using the <IfModule rewrite_module></IfModule> tags so if the module isn't available, Apache shouldn't have read that part of the file. The fact that it's reading inside that tag pair means it's able to load the mod_rewrite.so DSO.

Code:
[root@test httpd-2.2.19]# service httpd restart
Stopping httpd: [FAILED]
Starting httpd: Syntax error on line 203 of /usr/local/apache2/conf/httpd.conf:
Invalid command 'SetEnvIfNoCase', perhaps misspelled or defined by a module not included in the server configuration

[Code]...

View 7 Replies View Related

Programming :: Code Omitted And Invalid Command

Apr 22, 2011

I am getting following error during execution of the example program

[root@localhost NSExamples]# ns example1b.tcl
ns:
[code omitted because of length]
: invalid command name "4"
while executing
"4 "
[root@localhost NSExamples]#

i ran the same program successfully but after placing a protocol i couldnt run this

View 2 Replies View Related

CentOS 5 :: Pidof: Invalid Options On Command Line?

Aug 19, 2009

when i show status ricci on centos5.3x86_64 #service ricci status pidof: invalid options on command line pidof: invalid options on command line p is stopped how can i fix that bug ?

View 4 Replies View Related

Ubuntu Servers :: OpenLDAP - Setting Up ACL (Invalid Credentials)

May 18, 2010

I'm trying to set up an OpenLDAP server on a clean install of 10.04 server (AMD64). Following the server guide [URL] I get down to the "Setting up ACL" step:
$ ldapsearch -xLLL -b cn=config -D cn=admin,cn=config -W oldDatabase=hdb oldAccess
This command fails with "ldap_bind: Invalid credentials (49)"

When I replace the dn with what it seems like it should be:
$ ldapsearch -xLLL -b cn=config -D cn=admin,dc=example,dc=com -W oldDatabase=hdb oldAccess
I get "No such object (32)"
I have a feeling this is because 10.04 no longer asks you for the admin username and password during the initial debconf (nor does dpkg-reconfigure).

I can continue through the guide using this form of the commands (which were used earlier in the Guide):
$ sudo ldapsearch -Y EXTERNAL -H ldapi:/// -b cn=config olcDatabase=hdb olcAccess
But I'm a little concerned that I'm not able to properly use the admin user to make LDAP changes to the configuration. It also seems like the Server Guide ought to use the 'sudo ... -Y EXTERNAL' form of the commands throughout if cn=admin,cn=config isn't going to work.

View 5 Replies View Related

Fedora Security :: Suddenly Root Password Invalid For Su Command?

Apr 9, 2011

I have recently installed Fedora 14 on a new computer we presented as a gift to my sister-in-law. She is new to Linux. Although I've used Fedora since Core 1, I'm no expert on security issues, and this baffles me. She's doesn't know how to change the root password, so why doesn't it work any more? She discovered the problem when attempting a yum update from a terminal.(1) How could the root password have gotten changed? How likely is it that someone got onto her system through ssh, made a lucky guess on her root password, and then changed it? Are there robots that do this?

(2) The firewall is enabled. I have it set up as follows: (a) under "Trusted Services," only ssh is checked (I need to be able to get in remotely this way); (b) under "Trusted Interfaces," I have eth0 checked (I need to be able to use VNConto her desktop).Question: Are these settings giving ample protection? What settings would be recommended to protect her system while at the same time allowing me to access it through ssh and VNC?

View 8 Replies View Related

Software :: Install The Ssl Module For Apache - Invalid Command 'SSLEngine'

Oct 17, 2009

I compiled a fresh install of httpd on a new linux box, added a virtual hosts entry for an https site, but when I try to start apache I get the error:

Code:

Invalid command 'SSLEngine', perhaps misspelled or defined by a module not included in the server configuration Is this because I don't have mod_ssl compiled in?

View 3 Replies View Related

Software :: Top Command Version 3.2.6 Invalid Results Compared To CollectD?

Mar 11, 2011

I am trying to get the correct CPU usage using top. I ran collectD and I got different results.This especially happens when the CPU usage is close to 100%.Has anyone experienced having the top command report different results than other CPU usage utilities?

View 5 Replies View Related

Ubuntu Servers :: RAID Won't Assemble: Failed To Add /dev/sda To /dev/md0: Invalid Argument

Jul 3, 2010

My hard drives kept dropping out of the raid array, so I finally identified the problem as a bad sata cable. I redid the wires and now when I try to assemble I get this:

Code:

mdadm -v --assemble --scan /dev/md0
mdadm: looking for devices for /dev/md0
mdadm: no recogniseable superblock on /dev/sde4

[code].....

View 5 Replies View Related

General :: Unable To Start Apache On CentOS - Invalid Command 'Order'

Aug 25, 2009

I am unable to start apache on my linux machine with following errors Starting httpd: Syntax error on line 117 of /etc/httpd/conf/httpd.conf: Invalid command 'Order', perhaps misspelled or defined by a module not included in the server configuration I am using CentOS5 with apache version httpd-2.2.13

View 99 Replies View Related

Server :: Invalid Command 'ProxyHTMLEnable' Perhaps Misspelled Or Defined By Module Not Included

Jul 18, 2010

I am getting following error "Invalid command 'ProxyHTMLEnable', perhaps misspelled or defined by a module not included in the server configuration" Saw this thread in /etc/apache2/mods-enabled/ I see

[Code]...

View 6 Replies View Related

Software :: Invalid Command 'CustomLog' - Misspelled Or Defined By Module Not Included

May 1, 2010

I am getting this error when trying to start apache. This is on a server that was functioning but now, when I tried to restart the server, this error shows up when trying to start the httpd service. The command that is causing the error is: CustomLoglogs/rosewood.access combined However, my guess is that it has something to do with either a module not being loaded or something wrong with the setup. But, as I said, this server was running so I am really not sure what changed. Server is Apache 2.0.52.

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved