I used sg_sata_ident to get the IDENTIFY_DEVICE output on my SATA drive. The output shows the drive as being able to support READ_BUFFER/WRITE_BUFFER. However, when I issue sg_read_buffer /dev/sda, I get an error - DRIVER_SENSE - Invalid command operation supported.
View 2 RepliesI have a problem with acl's in Ubuntu Server 10.04. When i write in a terminal the command setfacl, the machine returns error: setfactl /home/xxxx: operation not supported.
View 1 Replies View RelatedI'm using linux suse 9.3. Recently i try to run execution files but it shows an error try running with the option "-console" or "-silent" When I tried with the -console option, I got the error - The wizard cannot continue because of the following error: Invalid command line option: console is not supported (1001) (403)
[Code]...
Ubuntu 9.04 server (64bit)
8GB
(2) 320 WD HDD - RAID 1
After coming home one evening I found my server was turned off. My suspicions lead me to believe we had a storm and the power went off, then the UPS went off and finally at that point the server went off too. I think my server was set to allow security updates. After it turned of and restarted it seems it made a change to Grub and upgraded it to Grub2. In doing so I now get the following message:
Error 13: Invalid or un supported executable format
I have tried to do the following:
url
This solved the problem for me, from > url
Quote:boot from the live medium and chroot into the Linux installation:
$ sudo mkdir /mnt/linux
$ sudo mount -t ext4 /dev/sda1 /mnt/linux
code....
Then, the following command should resolve the issue. :
$ sudo grub-install --recheck /dev/sda
I have a desktop that has a d-link DWL-520 wireless card, which was working under Windoze. Today I installed Centos 5.4 on the system , which went cleanly. I then used Network Configuration to set up the wireless card. I specified to use DHCP, set the SSID and authentication password. When I tried to activate the card I get these error messages
Error for wireless request "Set Mode" (8B06): SET failed on device wlan0 ; Operation not supported. Error for wireless request "Set Encode" (8B2A): SET failed on device wlan0 ; Invalid argument. Error for wireless request "Set Encode" (8B2A): SET failed on device wlan0 ; Invalid argument. Determining IP information for wlan0.
The hardware manager seems to have correctly identified the card and chipset, (Intersil Prism 2.5) and installed driver hostap_pci which came with the distro. This web site seems to suggest that this is the correct driver: [URL] searching forums I've found a few references to these errors, but they were from several years ago, and for different distros and cards. I did find a reference to using Network Manager to configure the card instead of Network Configuration. I started the NM service and configured a connection using it instead, but still no luck.
[Code]....
Although Win7 is not bad either, I'm really happy using new Ubuntu Maverick Meerkat on my notebook. Since I've been using Linux (SimplyMepis, then Arch) on my desktop, I'm really happy that I found a Linux distro which suits me the best. BTW, I have a Toshiba T130-10g which I love for its long battery life. However, I would like to solve some issues/dilemmas/questions (and I searched for s the solutions of some of them on Google so please don't tell me to use it...)
1) How do I turn off Wifi completely in a comfortable way? I tried sudo iwconfig wlan0 txpower off but it threw: Error for wireless request "Set Tx Power" (8B26): SET failed on device wlan0 ; Operation not supported. I even edited something in interfaces configuration file, but it did nothing. Oh, I forgot, my notebook doesn't have a hardware switch to turn off wifi.
2) Setting brightness doesnt work for my laptop. I can set it by udo setpci -s 00:02.0 F4.B=25 but I'm looking for a more comfortable solution. BTW, editing one GRUB configuration file didn't help and ended in booting into command line (it was something with adding backlight=vendor or something like that...)
3) My touchpad is sometimes too sensitive and clicks somewhere sometimes when I don't want to it. How to make clicks less sensitive? I tried to play with some mouse settings but it didn't help much but perhaps I'm setting a bad parameter.
4) I remember that back in KDE 3.5 times a network manager icon had a setting to switch on net statistics so I could very easily see how much I downloaded every day. But, since KDE 3.5 is not supported anymore, I stopped using it in refusal to update to KDE 4.XX and switched to GNOME. Since for some months I'll have a limited download connection, is there something esay in GNOME to watch my net statistics that wouldn't be deleted after reboot/shutdown?...
I also am having problems with 11.04 and the Unity desktop. In particular when I ask Evolution to Back Up its settings, I get the error message "The folder contents could not be displayed" "Operation not supported". I've used this operation many times on earlier versions of Ubuntu. I've tried removing and re-loading Evolution, but no difference.
View 1 Replies View RelatedSo hibernate used to work fine on my computer, but then after some updates one day - the option just disappeared from all log-out consoles from all desktop managers (xfce4, gnome .etc).xfce4-power-manager now says "Hibernate operation not supported" when I attempt to select it.
View 1 Replies View Relatedi guess this is an installation issue as i am newish to Linux and got a F14 laptop from a used/refurb store... Anyway it seem i have difficulty with getting GTK running or maybe it is WGET...?
i did manage to install apt-get and was able to run synaptics ... but now whenever i try to run synaptics it flashes the interface and crashes. i tried apt-get search wget and it says invalid operation search. i tried apt cache wget and get a crash box in the upper right corner... i tried apt-get gtk+extra-2.1.2-4.fc14 and it says invalid operation gtk...
All of which is frustrating my attempts to get the GTK interface to J working. Their script uses WGET which i also cannot get.
Bottom Line: Dvd Drive died in my toshiba laptop and it was replaced (not before tech for some reason reformatted the Win7 partition... which was 100% un-needed, but thats beside the point now. I redid win7 (the tech installed vista) and am TRYING to "redo grub". Facts: The Slackware AND Ubuntu Partitions ARE STILL THERE and when i use SuperGrub Boot CD (which doesn't restore my grub by itself) to boot into slackware, i can see ALL THE CONTENT of both Linuxes still there including grub on ubuntu partition
(Tri-Boot: Ubuntu, Slackware, and WIn7) I had it working for two years or so, SO i know this "setup" works fine. I am A) Trying to do this as simply as possible. B) Trying to avoid the need to download a 800MB ISO (as seen for this issue on this forum) and trying not to have to reformat Ubuntu Partition (though I have the .Debs I have downloaded for it backed up ... all 1.7GB of them) I have /dev/sda1 as win7, /dev/sda2 as Slack and /dev/sda3 as Ubuntu (which contains Grub Legacy).. Every command I do seems to result in an error like "invalid command" or "invalid Execution format " (i think that second one is right) type errors. I compiled (awhile back) a few kernels for Slackware, but feel goofy that I cant figure what i this out (what i thought was going to be a "2 minute" fix)
The command and error message:
gtwy ~ # ip rule add from 64.251.23.186 table t1
RTNETLINK answers: Operation not supported
Older article of the same problem, but it did not help me: http://forums.gentoo.org/viewtopic-t-696982-start-0-postdays-0-postorder-asc-highlight-.html
I have looked on google at great lengths to try to find a solution. It seems that my kernel configuration is missing something? My system/kernel is: 2.6.36-gentoo-r5 #3 SMP Thu Jan 13 10:49:06 EST 2011 x86_64 Intel(R) Xeon(R) CPU X3220 @ 2.40GHz GenuineIntel GNU/Linux.I am posting this on SuperUser since this system is used as a workstation and this problem is unrelated to specific tasks that are handled exclusively by servers.iproute2 is installed:
gtwy etc # emerge --search iproute2
Searching...
[ Results for search key : iproute2 ]
[ Applications found : 1 ]
[code]...
I'm dualbooting XP and Kubuntu on my laptop, and want to move some files from my ext3 part to the NTFS part. Mounting it goes fine, but can't write, create folders, etc. to the NTFS part. Started looking for people with similar problems online and found the guide on this site, so I installed ntfs-config and went through the steps, checking "Enable write to internal device", etc. Still no good. I tried manually putting in the write option on the mount command, no flags comes up but konsole still says "Operation not supported." Dual-booting Vista and Kubuntu Jaunty
View 3 Replies View RelatedNautilus won't start, for example, I click home folder, the bar below display "opening username" for 5 sec and nothing opened. I used another account seems no problem. The problem happened since my last update (and I forgot to close firefox and seems some crash happened). When I open the terminal and click the icon in Gnome, the terminal show
(nautilus:3411): Nautilus-GDU-WARNING **: unable to query info: Operation not supported
When I try to open the trash can in nautilus I get this message: "Sorry, could not display all the contents of "trash": Operation not supported". Also when I click on the computer icon on dock nothing happens. When I plug my ipod in, it mounts but it doesn't appear in rhythmbox.
View 2 Replies View RelatedI installed pyxattr to play around with, and when I try to set them it says that the operation is not supported. Does Arch Linux not support xattr, or how do I enable them?
View 10 Replies View RelatedUsing gthumb, I am unable to get pictures off my iPad. It saysCould not perform the operation
Operation not supported by backend
I have a system that has an intermittent issue with copying files. Below is the error that occurs. Error while copying "<filename>"
There was an error coping the file into network:///
Operation not support by backend
The user has Ubuntu 8.04. They are using the Nautilus window to copy files (drag and drop) from a CD/DVD or USB device. The directory they are copying onto is a RAID0 device with approximately 2T of space, and more than enough space to take the files. The permissions for the drive and folders are set to the user.
This occurs randomly and is very frustrating. We cannot duplicate it and when it does occur, it will happen once, then work fine. I've been checking forums and help files all over, but find nothing similar. The only stuff I find is if it's a new install and the permissions haven't been set correctly. Even a confirmation that someone else has seen this before.
I have a problem when trying to start Cyrus IMAP (on Ubuntu server):
#./master &
[1] 1171
[1]+ Exit 1 ./master
I got a message from /var/log/message:
May 18 16:26:44 ldap master[1146]: process started
May 18 16:26:44 ldap master[1146]: unable to setsocketopt(IP_TOS): Operation not supported
i enabled LDAP authentication for group in apache2.2 is working fine. When i enabled sub group search using AuthLDAPSubGroupDepth 1 is showing error Invalid command 'AuthLDAPSubGroupDepth', perhaps misspelled or defined by a module not included in the server configuration here below the ldap coding for apache2 running in ubuntu 10.04
AuthzLDAPAuthoritative on
AuthType Basic
AuthName "xxxxx"
AuthBasicProvider ldap
AuthLDAPSubGroupDepth 1
[Code]...
Essentially my ksh script calls a program and passes some commands. It's entering the program just fine, but when it passes the commands it gets "invalid command" error, and loops for a bit.
When I run all the steps manually the program works fine. I turned debug on and see that it enters the program, cmbview, but for whatever reason, it fails on any command that it tries to parse.
Tried running it in a ksh shell, same error. Tried running it as bash shell, same error.
The cmbview exe works and the following commands work, so I can only assume its something with the script parsing the commands.
I'm unable to change the setting of the actual printer on my system, cant even delete itthe system ask me the root password, after i enter it, i always get this message "There was an error during the CUPS operation:'client-error-not-authorized'."
View 8 Replies View RelatedI am trying to install Zend Server, and that went well. Apache and all the other items were installed.
But when I go to start Apache, I get this error:
Quote:
root@laptop:~# /etc/init.d/apache2 restart
* Restarting web server apache2 Syntax error on line 6 of /etc/apache2/sites-enabled/zendserver_gui.conf:
Invalid command 'php_admin_flag', perhaps misspelled or defined by a module not included in the server configuration
[fail]
And on line 6: php_admin_flag tidy.clean_output off
The rest of the file is below:
Quote:
# Warning: Modifying this file will break the Zend Server Administration Interface
Listen 127.0.0.1:10083
NameVirtualHost 127.0.0.1:10083
# do not allow override of this value for the UI's Vhost as it should always be off when generating non-html content such as dynamic images
code....
Gnumeric 1.10.1. I tried editing a .xls spreadsheet with gnumeric and I came across the message "operation not supported".
I tried running Gnumeric from terminal to see if there was any more info regarding the save, but it just outputted that one message "Operation not supported" and that was it.
The .xls file is on another partition so I figured maybe Ubuntu mounted the partition in read-only, but no - I can edit other documents on the partition.
I right clicked on the .xls file to see the permissions and it says Owner Group and Others are all read+write.
I uninstalled and reinstalled gnumeric, but no change.
I'm using a RHEL5/Centos5 variant. After struggling with various 2 TB hard drive failures, I started using the Hitachi Deskstar and Ultrastar models, and had none of the earlier green feature related or QA problems I had with all others. However, I began seeing SATA controller freezing under heavy loads, like large rsync mirror operations. My controller is an on-board ICH7R running in AHCI mode. The symptoms are that the drive goes off line and begins to log thousands of SMART errors for Spin-Up Retries. Analysis confirms that the drive is 100% OK after, except for the huge SMART log. This happens on two servers, and multiple drives. Changing the drive to 1.5 Gbps interface speed reduces the problem greatly but does not eliminate it.
I'm working with Hitachi engineering on this, and their only theory is that it has to do with "non-zero buffer offset". Apparently this is a feature of NCQ to receive data out of sequence, and Hitachi says that ICH7R is supports NCQ but not this feature. I am told that BIOS is supposed to filter offending commands but BIOS vendors sometimes err. An alternate is to filter them at the driver, which I believe is libata. Does anyone know anything about this issue? Where might be a good place to make a query about this, with regards to libata? I've contacted the motherboard vendor about the BIOS issue, but I'd like to look into libata also.
As I understand the rc.wireless script the command 'iwconfig wlan0 nickname ....' is always executed. On my computer this causes annoying message "Set nickname: operation not supported". I read the man for iwconfig. It seems for me that there are no particular reason to force the 'set nickname' operation.
View 2 Replies View RelatedI have recently installed Fedora 14 on a new computer we presented as a gift to my sister-in-law. She is new to Linux. Although I've used Fedora since Core 1, I'm no expert on security issues, and this baffles me. She's doesn't know how to change the root password, so why doesn't it work any more? She discovered the problem when attempting a yum update from a terminal.(1) How could the root password have gotten changed? How likely is it that someone got onto her system through ssh, made a lucky guess on her root password, and then changed it? Are there robots that do this?
(2) The firewall is enabled. I have it set up as follows: (a) under "Trusted Services," only ssh is checked (I need to be able to get in remotely this way); (b) under "Trusted Interfaces," I have eth0 checked (I need to be able to use VNConto her desktop).Question: Are these settings giving ample protection? What settings would be recommended to protect her system while at the same time allowing me to access it through ssh and VNC?
So what does it mean when I can run this command as root successfully from the command line (it will find all user.xml and zip):
But when I add it to a script (.sh) I get the error below:
Error:
When I installed Fedora GNOME I could use my printer fine (But I had to change the recommended driver) Now, I switched to KDE and I plug-in my printer, It automaticly adds it, Now I have to delete it and re-add to fix the small bug... Except when I press "Remove Printer" I get "There was an error during the CUPS operation: 'client-error-forbidden'."
View 1 Replies View RelatedI'am currently trying to create my own httpd file to set up a web server. I'am struggling with the error and i can't find out how to resolve it :
[code]...
I have downloaded Fedora 11 x64, and I went to the adobe website and downloaded the tar.gz file for flash player. I went into the terminal to untar the file and after I did that I tried to install it and got this error :
ERROR: Your architecture, 'x86_64', is not supported by the Adobe Flash Player installer. What does this mean? My dad could get his to install but his is 32 bit.Do I have to wait until the full version is out?