I am getting following error during execution of the example program
[root@localhost NSExamples]# ns example1b.tcl
ns:
[code omitted because of length]
: invalid command name "4"
while executing
"4 "
[root@localhost NSExamples]#
i ran the same program successfully but after placing a protocol i couldnt run this
Essentially my ksh script calls a program and passes some commands. It's entering the program just fine, but when it passes the commands it gets "invalid command" error, and loops for a bit.
When I run all the steps manually the program works fine. I turned debug on and see that it enters the program, cmbview, but for whatever reason, it fails on any command that it tries to parse.
Tried running it in a ksh shell, same error. Tried running it as bash shell, same error.
The cmbview exe works and the following commands work, so I can only assume its something with the script parsing the commands.
Where can I find the top command source code... I got it from "http://procps.sourceforge.net/index.html" but it seems for Solaris. where can I get the source code for top commend running on Linux????
View 3 Replies View RelatedI just want to see how the command line such as : "cat", "split", "ls"...ect source code ? Are they written in C or other language ? I don't know where to search those?
View 6 Replies View Relatedwhen I execute the command from the shell command line - it works and no error code.if I do the exact same command from a perl file - it fails with code 32512.the file is created from the same perl script that runs the command that fails. file permission is 0664.
Code:
#! /usr/local/pkg/perl-5.8.8/bin/perl
print "Content-type: text/html
[code]...
I need to rewrite the selenium java code into its equivalent php code.
View 5 Replies View RelatedBottom Line: Dvd Drive died in my toshiba laptop and it was replaced (not before tech for some reason reformatted the Win7 partition... which was 100% un-needed, but thats beside the point now. I redid win7 (the tech installed vista) and am TRYING to "redo grub". Facts: The Slackware AND Ubuntu Partitions ARE STILL THERE and when i use SuperGrub Boot CD (which doesn't restore my grub by itself) to boot into slackware, i can see ALL THE CONTENT of both Linuxes still there including grub on ubuntu partition
(Tri-Boot: Ubuntu, Slackware, and WIn7) I had it working for two years or so, SO i know this "setup" works fine. I am A) Trying to do this as simply as possible. B) Trying to avoid the need to download a 800MB ISO (as seen for this issue on this forum) and trying not to have to reformat Ubuntu Partition (though I have the .Debs I have downloaded for it backed up ... all 1.7GB of them) I have /dev/sda1 as win7, /dev/sda2 as Slack and /dev/sda3 as Ubuntu (which contains Grub Legacy).. Every command I do seems to result in an error like "invalid command" or "invalid Execution format " (i think that second one is right) type errors. I compiled (awhile back) a few kernels for Slackware, but feel goofy that I cant figure what i this out (what i thought was going to be a "2 minute" fix)
I'm running Kubuntu Karmic on my Dell Inspiron laptop - about 200 bug fixes behind because my only available internet is a cellular connection on a crappy wi-fi router - and last night, I suspended it, but it shut down instead. Not a problem, it does this fairly often, figure the RAM gets jostled or something.
But when I go to boot it up, it gets stuck at the pre-loading screen before getting garbled and dropping to the shell, where it says "mount: mounting /dev/disk/by-uuid/[insert hex code here] failed: invalid argument". Of course, mounting /root/sys, /root/dev and /root/proc fails, (directory does not exist) and it gives me the busybox initramfs prompt.
We Are Using Centos 5 64Bit with Kernel 2.6.18.92 with Amd Athlon ProcessorThe problem when calling setsockopt it return error errno:22 InvalidargumentThis code run on Macos ,Sunsolaris ,But fail to execute on Centos 5 64bit & The SCTP mailing group told me that this problem belongs to centosexample form ibm webside
/*
server
*/
[code]....
I am trying to connect to a wireless network. I got a problem with network manager. So I try to connect manually
I found wireless network around by using "iwlist scan" command.
I want to connect to a network with ESSID "MCC(Mandalay)" and Key "mdymcctraining"
Here is my problem The output of "iwconfig" command is
Code:
What does it mean "invalid argument"? It means that my wireless pre-sharedkey is not correct? I am sure the key is valid. It is used by any others with window 7.
I've a problem when I try to run arpd program to support my honeyd software but when I try to execute it then it shows this error message
./arpd 10.0.0.0/8
arpd: intf_get: Invalid argument
My arpd installation based on this tutorial [URL].
Apache is complaining about an error with SetEnvIfNoCase when I tried to start it. I've checked that the module /usr/local/apache2/modules/mod_rewrite.so exists. Also the 2nd code block below shows that I'm using the <IfModule rewrite_module></IfModule> tags so if the module isn't available, Apache shouldn't have read that part of the file. The fact that it's reading inside that tag pair means it's able to load the mod_rewrite.so DSO.
Code:
[root@test httpd-2.2.19]# service httpd restart
Stopping httpd: [FAILED]
Starting httpd: Syntax error on line 203 of /usr/local/apache2/conf/httpd.conf:
Invalid command 'SetEnvIfNoCase', perhaps misspelled or defined by a module not included in the server configuration
[Code]...
i enabled LDAP authentication for group in apache2.2 is working fine. When i enabled sub group search using AuthLDAPSubGroupDepth 1 is showing error Invalid command 'AuthLDAPSubGroupDepth', perhaps misspelled or defined by a module not included in the server configuration here below the ldap coding for apache2 running in ubuntu 10.04
AuthzLDAPAuthoritative on
AuthType Basic
AuthName "xxxxx"
AuthBasicProvider ldap
AuthLDAPSubGroupDepth 1
[Code]...
I've recently been trying to secure my Apache2 server running suPHP on an Ubuntu 10.10 box. My ideal solutions are to
1) Specify a specific php.ini on a per virtualhost basis. I have tried using the PHPINIDir directive inside a virtualhost block in my 'sites-available/default' file, but the parser throws an error
Invalid command 'PHPINIDir', perhaps misspelled or defined by a module not included in the server configurations I have figured out that the reason this directive is not recognized is because my server is running mod suPHP instead of mod php5. The default site on the server requires suPHP to perform certain administrative functions. First question would be, is there some other way to specify a specific php.ini besides using PHPINIDir, or does anyone have any ideas of how to get PHPINIDir to be understood under the current configuration?
2) Activate/Deactivate php5 on a per virtualhost basis. This will allow me to use PHPINIDir to specify a specific and secure php.ini. I know that I have php5 installed, as 'a2enmod php5' with a restart will activate php5 and override suPHP. Does anybody know what the commands would look like to load the php5 modules from inside a virtualhost block? I have looked around on the internet and found these two lines of code to add that will supposedly activate php5 under a virtualhost
LoadModule php5-module modules/libphp5.so
AddHandler php5-script php
I do not have a 'modules' directory in my /etc/apache2 folder, so I did a search for libphp5.so and found the only copy on my machine located in /usr/lib/apache2/modules. Naturally, I tried
LoadModule php5-module /usr/lib/apache2/modules/libphp5.so
AddHandler php5-script php
but received an error
apache2: Syntax error ...: Can't locate API module structure 'php5-module' in file /usr/lib/apache2/modules/libphp5.so
Surely I can't be the only one who's needed to specify different php.ini files for different virtualhost's while using suPHP, and I'd also have to assume I'm not the first one who's tried to integrate suPHP and php5 on a per virtualhost basis. Anyone have any ideas? I'm completely stuck, and that's the worst kind of stuck. The Apache2, suPHP, and php5 installations on my machine are standard for Ubuntu 10.10
I just reinstalled my server with Ubuntu 11.04 and I am now trying to put my websites back in place. The problem is that the configuration directive AssignUserId is no longer working. I simply get this:
Code:
root@silvertejp:/etc/apache2/sites-available# service apache2 startStarting web server apache2 Syntax error on line 12 of /etc/apache2/sites-enabled/finn:
Invalid command 'AssignUserId', perhaps misspelled or defined by a module not included in the server configuration This worked fine on Ubuntu 10.04. Should I install some module? How?
I recently installed Ubuntu 10.04LTS on my computer and realized I wanted to give 11.04 a try. So, using the Update Manager both times, I applied all updates then upgraded to 10.10 then to 11.04.
Here's where the problem starts. Grub loads fine. I choose Ubuntu. I briefly get a purple splash screen then a black screen with some text that looks like Ubuntu is trying to load (I've attached a picture of this screen). This screen flashes a couple times then stays up and nothing happens afterwards. I can input text and commands but I get no response. Not even an "invalid command". The only thing I can do is press CTRL+ALT+DEL and my computer will reboot.
I have Ubuntu installed alongside Windows 7 on a 50Gb partition (plenty right?), AMD 64-bit dual core processor, and an ATI Radeon HD 3200 graphics card. This is on an HP Pavilion dv3 laptop.
when i show status ricci on centos5.3x86_64 #service ricci status pidof: invalid options on command line pidof: invalid options on command line p is stopped how can i fix that bug ?
View 4 Replies View RelatedI have recently installed Fedora 14 on a new computer we presented as a gift to my sister-in-law. She is new to Linux. Although I've used Fedora since Core 1, I'm no expert on security issues, and this baffles me. She's doesn't know how to change the root password, so why doesn't it work any more? She discovered the problem when attempting a yum update from a terminal.(1) How could the root password have gotten changed? How likely is it that someone got onto her system through ssh, made a lucky guess on her root password, and then changed it? Are there robots that do this?
(2) The firewall is enabled. I have it set up as follows: (a) under "Trusted Services," only ssh is checked (I need to be able to get in remotely this way); (b) under "Trusted Interfaces," I have eth0 checked (I need to be able to use VNConto her desktop).Question: Are these settings giving ample protection? What settings would be recommended to protect her system while at the same time allowing me to access it through ssh and VNC?
I am trying to install Zend Server, and that went well. Apache and all the other items were installed.
But when I go to start Apache, I get this error:
Quote:
root@laptop:~# /etc/init.d/apache2 restart
* Restarting web server apache2 Syntax error on line 6 of /etc/apache2/sites-enabled/zendserver_gui.conf:
Invalid command 'php_admin_flag', perhaps misspelled or defined by a module not included in the server configuration
[fail]
And on line 6: php_admin_flag tidy.clean_output off
The rest of the file is below:
Quote:
# Warning: Modifying this file will break the Zend Server Administration Interface
Listen 127.0.0.1:10083
NameVirtualHost 127.0.0.1:10083
# do not allow override of this value for the UI's Vhost as it should always be off when generating non-html content such as dynamic images
code....
I compiled a fresh install of httpd on a new linux box, added a virtual hosts entry for an https site, but when I try to start apache I get the error:
Code:
Invalid command 'SSLEngine', perhaps misspelled or defined by a module not included in the server configuration Is this because I don't have mod_ssl compiled in?
I am trying to get the correct CPU usage using top. I ran collectD and I got different results.This especially happens when the CPU usage is close to 100%.Has anyone experienced having the top command report different results than other CPU usage utilities?
View 5 Replies View RelatedI am unable to start apache on my linux machine with following errors Starting httpd: Syntax error on line 117 of /etc/httpd/conf/httpd.conf: Invalid command 'Order', perhaps misspelled or defined by a module not included in the server configuration I am using CentOS5 with apache version httpd-2.2.13
View 99 Replies View RelatedI am getting following error "Invalid command 'ProxyHTMLEnable', perhaps misspelled or defined by a module not included in the server configuration" Saw this thread in /etc/apache2/mods-enabled/ I see
[Code]...
I am getting this error when trying to start apache. This is on a server that was functioning but now, when I tried to restart the server, this error shows up when trying to start the httpd service. The command that is causing the error is: CustomLoglogs/rosewood.access combined However, my guess is that it has something to do with either a module not being loaded or something wrong with the setup. But, as I said, this server was running so I am really not sure what changed. Server is Apache 2.0.52.
View 2 Replies View RelatedDear Advanced c/g++ on boost programers: I have copied and testd a simple (Copy a file with Boost) program from page 372, Example10-10, book(C++ cookbook)
[Code]...
I'm using linux suse 9.3. Recently i try to run execution files but it shows an error try running with the option "-console" or "-silent" When I tried with the -console option, I got the error - The wizard cannot continue because of the following error: Invalid command line option: console is not supported (1001) (403)
[Code]...
I am getting following error "Invalid command 'ProxyHTMLEnable', perhaps misspelled or defined by a module not included in the server configuration"
Saw this thread in /etc/apache2/mods-enabled/ I see
Code:
alias.conf authz_default.load autoindex.conf deflate.conf
dump_io.load mime.load proxy.conf proxy.load[code]...........
I have just started using Valgrind,which really is great. Most of the reported errors look kinda weird, though I can't really understand what's going on here, for example:
==00:00:02:52.033 7754== Invalid read of size 4
==00:00:02:52.033 7754== at 0x80B0987: MyCls::MyPrintf(long, char*, ...) (MyCls.cpp:270) ...
==00:00:02:52.033 7754== Address 0x47a5ee8 is 0 bytes after a block of size 296 alloc'd ...
==00:00:02:52.033 7754== by 0x809A6C1: ClsMain::taskRun(int, char**) (ClsMain.cpp:177)
==00:00:02:52.033 7754== by 0x816CFE8: main (main-C.cpp:2060)
==7754== ---- Attach to debugger ? --- [Return/N/n/Y/y/C/c] ---- Y
==00:00:02:57.410 7754== starting debugger with cmd: /usr/bin/gdb -nw /proc/7765/fd/1014 7765
GNU gdb Red Hat Linux (6.5-25.el5rh)
Copyright (C) 2006 Free Software Foundation, Inc.
GDB is free software, covered by the GNU General Public License, and you are welcome to change it and/or distribute copies of it under certain conditions. Type "show copying" to see the conditions. There is absolutely no warranty for GDB. Type "show warranty" for details. This GDB was configured as
"i386-redhat-linux-gnu"...Using host libthread_db library "/lib/libthread_db.so.1".
Attaching to program: /proc/7765/fd/1014, process 7765
MyCls::MyPrintf (this=0x47a5dc0, iPrm=3,
sMsg=0x6974320 "blablabla"...) at MyCls.cpp:270
270 cout<<endl<<"m_FilePtr="<<hex<<m_FilePtr<<dec<<endl;
Basically, Valgrind reported the "Invalid Read" error at line 270 of file MyCls.cpp, which is simply a cout of the m_FilePtr variable, which is a member variable of the MyCls class. It's a FILE* variable I use to write repeatedly on a text file. The address reported (0x47a5ee8) is 296 bytes after the "this" pointer (0x47a5dc0),as Valgrind correctly tells me but I honestly don't understand that. And of course, I need to read that variable, not only for the cout (indeed,the error is reported at every reading attempt). Besides, the application doesn't crash, but still I would like to understand if I really have to worry about this "error".
I am writing a code to restore original packet type from encapsulated packet type. However the following error occurred. Below is an extract of my code. Would appreciate if someone could help me explain why the error occurred and how to resolve this.
packet.h
struct hdr_cmn {
packet_t ptype_; // packet type
[code]....
where i get the tee command source code?.
View 2 Replies View Related