I'm running a syslog server on ubuntu 7.04. Can I somehow have it email me if it finds a certain thing in the log? For example. I'm running a PRI and when the PRI goes down, it logs a "DEACTIVED" in the log. I would like an email telling me this so I know to get on it and fix it.
View 9 RepliesI'm running a cobalt raq550 web server (Linux version 2.6) and I want to install a syslog program on it, something that could log messages and send me an instant email in response to certain messages it receives. Is there such a program?
View 6 Replies View RelatedStarting with Ubuntu Server 9.04, when I log in at times the OS smartly reports the number of updates available. I have a couple of questions of how to extend this functionality:
1) How could I back-port that functionality to 8.04 servers? Does that happen somewhere in the /etc/cron.daily/apt script? (Just the checking on # of packages needing updates, does not need to appear on the login screen.)
2) Then with that information, if the number >0 then use mailx to send admins an email. Since 9.04 and higher already do the first item, then in my mind #2 is the only thing needed for 9.04 and higher servers, and #1 is also needed for 8.04 boxes.
Ive been asked by my boss to set up a ubuntu machine that will be used as a syslog server. He wants a GUI as a posed to a CLI. He would also perfer to have it non web based. We already have cati installed but he is not keen on the syslog side of that. Does anyone know of any other syslog programs?
View 1 Replies View RelatedI have an email setup where all of the emails from our email host is downloaded to our Linux server using Fetchmail. Then some of the incoming emails are sent to an MS exchange server (server1.domain.com) using Postfix. What i want to do is to send a copy of all emails to Another server (server2.domain.com) for redundancy.Can postfix be configured to send copies out to both?
View 1 Replies View RelatedI have recently setup a new mail server and have simulated sending and receiving on the new email server. The new email server will replace the primary one.I would like to setup the new email server in parallel with the existing one.This way i can observe issues that might occur and be aware of what could go wrong. I want to received mail to be delivered to both mail servers at the same time.I would like to use postfix, exim i find a bit to difficult to understand.I have thought of using transport maps, the only problem is that you can only forward mail to one server at a time using transport maps.I think recipient_bcc_maps and sender_bcc_maps could work, i would just like ideas of how i can do this.
View 5 Replies View RelatedI'm quite new to xen and only have access on a production box (which happens to be debian) so I am unable to employ my hack it attitude in case i bring the whole thing down. When i run xm list it displays my domains but my states are rather confusing.
[Code]...
I am thinking about buying a domain name and hosting my web server.
I have seen pricing from $8 to $30 a year. Any favorites from fellow ubunters? Also this whole "whois" thing scares me, if I am correct my information I enter when buying the domain is enter into some big pool of information. People can find this information out and dig up important information. url Can I prevent this with private Whois or how do I set it up? This website examples some of my fears with this whole WhoIs thing, url whois/Private-Whois.html Does most/all domain registers come with email or just email forwarding or both? How does that work? At this moment, my only question about Web Hosting is how do I get Website Statistics as in: Stats, web analytics, web traffic stats and more? I will be web hosting through Ubuntu 9.10 gnome.
On this Ubuntu 8.04.4 LTS server, I want to log the messages from a Linksys router. So I made this change to "/etc/init.d/sysklogd" SYSLOGD="-r" Then in "/etc/syslog.conf" I added the following to the top of the file: Code: if $fromhost isequal 'Linksys' then /var/log/Linksys.log & ~
Then I rebooted the server. But there is no "/var/log/Linksys.log" file.
When building 8.04 servers, I reconfigure snmpd's logging options to prevent copious low priority messages being logged whenever our network management workstation polls them. I edit /etc/default/snmpd and change line 11 from:
Code:
SNMPDOPTS='-Lsd -Lf /dev/null ...'
to:
[code]....
I wish it was under better circumstances...very morning at 6:25am syslog-ng stops logging, right after it attempts to log rotate. its odd... the daemon doesnt die... it gets a new PID, but doesnt write the output to /var/log/syslog.Yet if I manually restart or reload syslog-ng it works great... its just like it doesnt like the logrotate...I have googled around and tried a few things...first I changed the postrotate in the logrotate.d/syslog-ng
--------/etc/logrotate.d/syslog-ng---------
/var/log/syslog {
rotate 7
[code]....
Is there a way to force the syslog ie /var/log/messages to restart at say 1:00 am instead of 7:55 or so each morning?
View 4 Replies View RelatedI'm guessing its possible but I can't seem to find any documentation on how to do this.I've tried playing with entries at the top of my syslog.conf file like:
*.* @172.20.10.1 # 1 server, works file
*.* @172.20.10.1,172.20.20.11 # doesn't work
*.* @172.20.10.1 172.20.20.11 # nor this
*.* @172.20.10.1,@172.20.20.11 # nor this
*.* @172.20.10.1 @172.20.20.11 # nor this
I am looking for an open source syslog server which accumulate the each and every log of Windows, Solaris, Linux and network devices. Currently I am using Syslog-ng which is not fulfiling my requirement in Windows clients, as I need the logs of every action which user performed after logon.
View 2 Replies View RelatedI recently upgraded a Ubuntu server from version 8.04 to 10.04 and after a reboot the webmin and syslog-ng server do not start at boot anymore. I can start them manually by doing /etc/init.d/webmin start and /etc/init.d/syslong-ng start and everything works fine until I root again. Granted this machine is rarely rebooted but when it is, I don't want to have to remember to start these services. I have tried a full removal of syslog-ng and reinstall but to no avail. The entries are in the rc directories like they should and the links are valid.
View 1 Replies View RelatedI am running a headless Ubuntu 10.04 server with the 2.6.32-28-generic kernel. For what I can figure out no single direct cause I get a high load average and the following syslog output at random intervals. Generally the load average will drop back down to normal however the kernel errors will still continue What little I have been able to find has pointed to memory issues. I am not totaly convinced this is the cause as the server will be showing >50% free when the errors are happening.
[code]...
I guess with major changes to syslog-ng, php-syslog going to licensing cost, and major overhaul to the syslog plugin with cacti - alot of documention was either disjointed, outdated or I just couldn't find it.this was performed on an 11.04 Ubuntu Server tall. I already had Cacti up and running and just needed to make it also a syslog collector.This guide assumes you already have mysql running, and cacti is already in place. If something looks wrong - please correct me. I am doing this from memory - trying to remember what all I had to do, and not a super admin.Required ubuntu install packages:libdbd-mysql syslog-ngcacti install packages:[URL]
Stop syslog-ng if you want. Changes should not take effect until you restart it.Should save the default syslog-ng configuration if you want to be safe. Below is the absolute minimum you need to get this working.Configuration on ubuntu is location in /etc/syslog/syslog-ng.conf Also make sure you fill in the proper username and password for mysql.
Code:
@version: 3.1
#Bare minimum syslog-ng configuration
[code]....
How do clients handle offline syslog servers?Will the log files be buffered locally to be sent to the syslog server when it comes back online, or will any log data generated during downtime be lost in cyber space?
View 1 Replies View Relatedturn up the level of logging that my DHCP Server is writing to SYSLOG?I can't seem to find a syslog.conf file to edit.
View 1 Replies View RelatedCurrently Im having a syslog server that consolidate firewall logs on port 514 udp. Im also having a IDS device that I wish to push its logs to this particular syslog server so that I can retrieve my IDS logs on this server as well.
Is it possible to do so?Having syslog listening on port 514 for both firewall and IDS logs? If it is possible will the logs be recorded in a single log file?Or will it be recorded in a separate log file ie. firewall.log, IDS.log etc?? I wish to have them in separate individual log files or else there will be hard time segregating the log entries in a single file. Can anyone advice on how to achieve this??
trying to replace syslog with syslog-ng. When I:
yum erase syslog,
wants to remove everything else that (presumably) has syslog as a dependency. how do I replace the dependency on syslog with a dependency on syslog-ng?
I noticed in my system that my root partition is getting full. I found a lot of old compacted syslogfiles. Had a look at etc/sysconfig editor eg cron but could not find a setting which allows to delete files older than a month. Where and how could I influence this ? I deleted manually all syslog files older than a month. Approx 6GB
View 9 Replies View RelatedI wanted to make a SysLog Server in Ubuntu 10.04 Desktop to collect the startup log of all the workstation inside the local area network,which should have a similar functionality to this guide here:Debian Syslog Server..However, when editing the sysklogd, i noticed it was empty and does not have any default values, along with the /etc/syslog.conf, which does not also exist.
View 2 Replies View RelatedI wish to prevent the samba messages (mainly nmbd and winbindd) from appearing in the system log (/var/log/messages). I want to allow samba logging to the standard samba logfiles, but prevent the syslog getting clogged up by samba. I added syslog = 0 to smb.conf and reloaded the config but the messages were still appearing. I also tried the following (and restarted the syslog via /sbin/service syslog restart) # Suppress messages from samba.
nmbd.* /dev/null
smbd.* /dev/null
winbindd.* /dev/null
For interests sake the messages I'm getting are below (I'm not concerned about the messages themselves, I can chase them up at my leisure via the samba logs) Mar 18 09:58:29 SERVER nmbd[3808]: query_name_response: Multiple (2) responses received for a query on subnet xx.yy.z.zz for name DOMAIN<1d>. Mar 18 09:58:29 SERVER nmbd[3808]: This response was from IP xx.yy.z.zz, reporting an IP address of xx.yy.z.zz.
I use named as a local caching nameserver (it has seemed the most stable DNS solution in the past given my ISP's flaky DNS servers) and I've noticed (since using fedora 12) a number of "broken trust chain" messages from named in /var/log/messages, for example:
Code:
named[986]: broken trust chain resolving 'www.bbc.net.uk/AAAA/IN': 212.58.224.20#53
I haven't made much sense of the things I've found via google, and am not even sure if this is a bad problem or not.
I have Postfix and Procmail installed on Hardy.
Are there any tips/tutorials for sending out scheduled email?
My main use case for this would be sending out a Tweet and an email at the same time.
I'm using ubuntu server 11.04 in a LAMP configuration. I have my login page setup but my php email verification isnt working. I would like to know how can I install a relay that can take the email verifications and send them through a gmail account.
View 2 Replies View RelatedI am setting up a new email server by following the Flurdy guide. I can send but I can't receive. I can telnet in with both the IP address & telnet mail.domain.com 25 I'm not using or loading shorewall because I will be relying on the firewall that is in the router. I have been following the test section of the flurdy tutorial. I am tailing the mail.log file and only see the status as being different from the example
"status=bounced (mail for domain.com loops back to myself)"
It seems like it is getting through to the server but then getting rejected.
I host a webpage from my PC, and I was having all kinds of issues trying to get it to send emails. These steps send and receive the email through a gmail account. This page saved me.
Here are the simple steps
0. get a gmail account
1. install pear
Code:
sudo apt-get install php-pear
2. Install pear packages:
(I'm not really sure what this does, but I did it, and everything is working)
Code:
sudo pear install -o Mail
sudo pear install -o Net_SMTP
3. run php script to send email.
Code:
<?php
// Include the Mail package
require "Mail.php";
// Identify the sender, recipient, mail subject, and body .....
I recently bought my own domain name and have started working on my website. I am way excited about setting this site up. My question is, what would be the best way to setup an email system where users are able to login and check their email...I guess like, a web-based system? Then they can configure a client if they wish with their email address.
View 6 Replies View Related