Ubuntu Servers :: Cannot Print From Mac Client
Feb 5, 2010
I am trying to print from our new Mac laptop to our ubuntu server. The ubuntu server works fine as a print server for our XP, Vista and Ubuntu clients.
I tried this procedure... [URL]
The best I can do is make the Mac print pages squished down to 1/4 size. On my ubuntu client I had to change the print resolution from "auto" to 600x600 to make it work. I don't see the same option on the Mac.
Mac OSX 10.6.2
Ubuntu Server 9.10
Printer: Canon S900
Cups driver: Canon S800 Gutenprint v5.2.3
Cups version 1.4.2 on the mac
Cups version 1.3.9 on Ubuntu Server
How do I print from my mac to the ubuntu server?
View 1 Replies
ADVERTISEMENT
May 26, 2011
I have configured server ubuntu 11.04. Everything works fine, but there is a need for some clients to connect local hard drive. What should I do? How and what modules are added to the ltsp-image? How to register in the fstab on the client? Maybe I'm going the wrong way?
View 1 Replies
View Related
Jun 15, 2011
I'm running a Fedora 13 print server, with CUPS package:
Whenever I try to print from a Windows (XP or 7) client to a Samsung ML 3050 printer, the printer pauses itself with the error:
I setup Windows clients with the following URL:[url]
Output from log file attached. This used to work fine previously from Windows, and I can still print from Linux clients.
View 4 Replies
View Related
Jun 17, 2010
I noticed that a bit after I had updated Ubuntu 10.04 through the Update Manager, I couldn't print at all! (I run ubuntu 10.04 on my laptop and have a networked HP Officejet 6110xi all-in-one printer connected to a comp running Windows XP home on the same LAN). Everything works when I boot up in windows vista, so the problem is definitely in Ubuntu.
First, I checked the printer jobs and it said that there was an error with a filter or something. Restarting the job didn't do squat, so I decided to try reinstalling my printer, but get the same CUPS error "error-client-not-possible" right after I click "Apply". I then Googled the issue but didn't find much of anything, so I thought I'd try reinstalling CUPS. No luck there either... Same error again and again.
View 3 Replies
View Related
Nov 29, 2010
I have just installed a Canon Pixma iP2200 on Fedora 14. The installation 'seemed' to go OK but whenever I try to print anything I get the following error:
"There was an error during the CUPS operation: 'client-error-document-format-not-supported'."
I have done a bit of searching and the only advice i could find is to uncomment some lines in /etc/cups/mime.convs and /etc/cups/mime.types but I don't have either of those files!
View 5 Replies
View Related
May 24, 2011
Since last few weeks i am struggling to setup printer connected to print server.
Here is the setup that i have:
I have Red Hat Linux machine from which i want to issue print jobs.
I have Windows Print Server having multiple printers connected to it.
I am able to print jobs from Windows client to any of these printers. But i am not able to print from Red Hat Linux. (i have verified that i can print using smbclient utility, but based on my reading, CUPS API could be used from application to discover, print and issue print jobs.)
I am not able to get the correct configuration for setting up CUPS client.
View 3 Replies
View Related
May 10, 2010
i found this video, and i really want to do the same. *newbie needs to learn [URL]...my question is, what need to be installed and how?
is there any specific configuration to make it works?
and will it work if i want to connect from Ubuntu to Fedora ?
View 1 Replies
View Related
Mar 16, 2010
I have a file server with ubuntu 9.10 on it already working. I want to add print server capability to it. This would be with a Lexmark z705.
View 1 Replies
View Related
Sep 17, 2010
Is there any Print Management service for centralized Print Manager and Print Monitor?
My requirement is a Print Management Server which monitor all the printers in my office and keep tracks of all the the printing operations (IP of the user, Digital copy of the printed documents, date, time...)
I installed CUPS but it's not the solution which I'm looking for.
View 5 Replies
View Related
Jun 13, 2011
I recently installed Ubuntu 10.04.2 Server on a small desktop to use as a print server. During installation I marked the sSH, Print, and Samba services.I can ssh into it just fine and that's how I'm configuring it. I have a hp Deskjet F2210 connected to it.My end goal is to be able to use the scanner from my *buntu desktop and from a desktop running XP. All of these being connected via ethernet router.
View 9 Replies
View Related
Mar 22, 2010
I recently built a server from an old box using Ubuntu Server 9.10. This is my first server and I am very new to the server world.I have an Epson Stylus NX400 connected via USB. I have managed to configure it to the point where I can see the printer listed on my client laptop and can print a test page. However, I cannot print anything else. When I access the job history through the CUPS adminI can see that the print jobs were recognized and marked as complete, even though the printer never physically engaged.
View 4 Replies
View Related
Jan 20, 2011
I need to first point out that I am a complete n00b when it comes to Ubuntu Server, and I managed to install Ubuntu Server 10.04.1 (on a screen-less Acer Aspire 5100 laptop) with Apache2, MySQL, OpenSSH, & PHP5. I currently have this server (hosting my website) behind a linksys router with only port 22, and 80 forwarded to its ip address. Now my question is: Would it be safe to configure a print server on the same machine in order to print from the 3 other computers on my router to one printer, or are there security risks involved (like what I have heard with LAMP servers and Samba on the same machine)? I am also wondering if it is safe the way I configured port 80 & 22? It has extremely long passwords, and I also went through the secure installation of one of the programs setting a root password too... But can somebody please help me with my server? I am very surprised I have gone this far in my first 2 weeks of my Web Scripting class too!
View 1 Replies
View Related
Jan 16, 2010
we want to get the rid out of windows 2003 print servers. we become sick of restart printer spooler services everyday when printing hang,halth,jam on printer. as admin we have to go to server and restartint services.ow let us continue,1)if using rhel installation time, what customer packages,binaries i should install it.
2) is cup is the print server name in linux world?3ing all windows xp,2000,2003,vista,win7 client4) where our all printers having ip based, 99% they r network ip based printers5) currently we open print share area on windows and all os(windows related) drivers r inside v right click and connect printers6) in linux will it stored drivers for windows for client?7) for ip base hp printers, do i need to download drivers from hp website or it will recongize detect over network all ip printers8) any chance of hanging printing similar to windows machines encounter then we have to go to restart "print spooler" services. as no alternate provide from microsoftkeeping above scenario what step should i follow and start practicing.
View 6 Replies
View Related
Jan 11, 2010
Ubuntu 8.0.4,GnomeDesktop with firefox (we are going to use) Epson Thermal printer(M-T500 Thermal Printer) [URL]... without linux driver,provide serial port ctrl. I get the command manual(pfd).I can test the command by run minicom however. I want to print the Web page (.html) provide by our web servers.Those pages have a js-button(javascript) each with the function that the firefox/or (custom) app demo is called to print the line/table/div/etc (not the whole page,like the receipt) after the js-button is pressed. There is a window showing the print-progress info will be better when it is printting. I just try to find the best way to do this: I got ghostscript after search by google but it is just used for pfd print or something. So How can I just implment this?
View 1 Replies
View Related
May 16, 2010
I am running Ubuntu Server Lucid 64bit on an AMD-based system and Ubuntu Server Lucid x86 on a dual P4 HP Netserver. I have a Trust PW-4120M UPS plugged into the AMD box via a serial cable.I have installed nut on both systems from the repositories (with "apt-get instal nut") and configured the AMD system as follows:
#ups.conf
[trustups]
driver = megatec
[code]....
I've tried every adjustment to the config files I can think of but without success. I'm guessing this is a permissions issue but I've been unable to find any info on this after extensive searching of Google. As far as I can tell (ie. I've not installed one!) there's no firewall operating on either machine.
View 2 Replies
View Related
Mar 23, 2011
I have success install DNS server using BIND on Debian 6.0. and it's work with windows client. but with ubuntu I can't ping all my domain. but if I use nslookup or dig from my ubuntu client, it's work. and I try connecting my ubuntu client to internet using modem.
View 2 Replies
View Related
Mar 18, 2010
I have a FC12 machine installed with CUPS and a CUPS-PDF printer. Printer are shared and works fine with this URL:
[URL]
I have both client machine Windows XP and Windows 7. Both has setup the above printer and print fine without any problem. I can get the PDF file from windows test print. The only problem is I face is wait for around 20 seconds for printer dialog prompt out when I press print button in Windows 7. However, my windows XP never t have this problem. The printer dialog prompt out immediately when I press print button.
View 2 Replies
View Related
Feb 26, 2011
I successfully installed cups on my fedorabox, I can manage it through the web interface on port 631. I added the hplip and installed a HP Deskjet printer. However, when I want to print a test page I get the following error: "no pages found". The print job is in a stopped state...
View 2 Replies
View Related
Mar 12, 2010
I'm trying to set up a private irc server. I install ircd-ircu, modify the configuration file, restart the daemon, and everything works great. After the next server reboot, the server shows the daemon is running, but I can no longer connect to the server from my irc client. I've tried restarting the daemon with no luck. I can then uninstall and reinstall it with the same outcome. Everything works initially, but after rebooting, the irc client can't connect..
View 1 Replies
View Related
Nov 15, 2010
There are several parts of problems in my question.
1. Install openLDAP and authenticate clients
2. Simple way to authenticate Ubuntu clients (just like Windows simple domain model, but Linux)
Part 1 What I have done: I have been working on openLDAP for the past 4 weeks. There is a lot of information on LDAP and I have read a lot of it There are several guides out there for openLDAP installation on Ubuntu, and I have tried many of them, and reinstalled the server between tests.
[Code]...
Part 2 Simple way to authenticate Ubuntu clients (just like Windows simple domain model, but Linux)
I have tried to find something similar to Windows client login, but haven't found anything that works. I just need to be pointed to somewhere to read about the authentication model in Linux. I can work out my from there. It must be something very simple I am missing, because when I read som echapters in The Ubunutu Bible, I can't find anything on it.
View 9 Replies
View Related
Jul 12, 2011
I have setup Postfix as my SMTP server.I sent myself a test mail from the outside world, and I can see it in the mail spool in '/var/mail'. The question is, how can I now access that from a mail client?
View 8 Replies
View Related
Aug 6, 2011
I am running a ubuntu server and want to host a web application (php/mysql based) however I dont want to use usernames and passwords for authentication. I'd like to use a client certificate. The military uses similar technology using the CAC card to provide the certificate for authentication.
not sure if this would be done using the apache modules or if php would be a better place to play with this
View 3 Replies
View Related
May 2, 2010
I am playing with openvpn, and I got stuck.I am using ubuntu server for openvpn server, which has 2 physical NICs, one is directly on internet and other is LAN, where few pcs are connected on.
View 5 Replies
View Related
Jun 15, 2010
Any step by step guide for LDAP server & client configuration. From installation.... to.... client login to ldap ubuntu server.
View 2 Replies
View Related
Sep 28, 2010
I am looking for a client/server application that can allow me to have remote GUI access (eg: VNC) but with the ability to use sound.
I see that TeamViewer has a linux application out now but for my company, it would compromise security protocol because it reaches out to the TeamViewer servers to do any work.
Basically, we have applications that require a GUI and we need to hear sounds from them if they throw an alert (the app is a monitoring tool).
We are running a VNC server on it currently and when our monitoring machine was on Windows, TightVNC was able to get the sound...that is not the case with any Linux client so I am wondering if there is actually one that exists.
View 3 Replies
View Related
Oct 8, 2010
is there anyone knows how to setup and configure thin client in edubuntu 10.04?. From the beginning installation until thin client work.we have 2 set of computers. 1 computer installed edubuntu 10.04 and installed LTSP (Linux Terminal Server Project) in the OS without NIC Card. And the other computers has only NIC card.. We setup it in the bios as a "First Boot" Network Card. We connect 2 computers using "pair-to-pair connection". There and after, we restart the 2 computers. "Nothings Happened".
View 3 Replies
View Related
Jan 23, 2011
This is my first attempt at a server, and I running Ubuntu 10.04 server. I had to reconfigure my network, so now I am attempting to use it as a server. I have a Linksys WRT54G2 connecting various machines-- Windows XP, Ubuntu builds, and LinuxMint 10 Julia.
The long and the short of it is that the server connects to the Internet-- I can get updates and install programs via terminal. The server also connects to the router, as tested by pings. The client computers all ping back and forth nicely, and I can access the file share via FTP from the local side and externally (this is part of a larger network).
How can I get it so that my client computers can access the Internet through the router and server?
View 3 Replies
View Related
Feb 13, 2011
However I just built a 10.10 server, installed webmin, vmware, and the server is working perfectly. I configured my bind 9 server using the latest webmin and on the server everything resolves perfectly to both the internet and lan. I have it set to 127.0.0.1, the server ip address is 10.1.50.25. However, it will not accept dns client queries in which they cannot resolve to the lan or internet. I have the dhcp giving out the dns server 10.1.50.25. NSLOOKUPS from the client show query refused. I know there has to be some setting or config that will allow clients to query but I am not able to locate it, and I am not totally knowledgeable of named.conf and been all through the webmin module and configuration settings.
View 6 Replies
View Related
Mar 22, 2011
I am running Ubuntu Server 10.10. I have installed OpenVPN using this guide I have set up everything correctly as this guide says, but I am having problems with the config file. I want to securely route all traffic on the client to the server, how ever the server will not start. My config is below:
Quote:
#################################################
# Sample OpenVPN 2.0 config file for #
# multi-client server. #
# #
# This file is for the server side #
[Code]......
The servers ip is 10.0.0.65 and I want to assign the clients the ip range of 10.0.0.200 to 10.0.0.20 When I try to start the server I get the message Fail.
View 8 Replies
View Related
Mar 31, 2011
I am practising setting up a small network using UBUNTU as a PDC through SAMBA to service xp clients.
I have sucessfully setup DNS on the Ubuntu server using Bind9 and can nslookup from both the client and the server by FQDN and can also ping ipaddress.
I have setup a basic smb.conf file however when I try to add the xp client to the domain I get an error message saying a domain controller for the domain could not be contacted.
I have disabled the firewalls on both the server and the xp client and still get the same error message when trying to join the domain. I've checked my network settings on the client, its set to use a static IP address and the DNS server and WINS server are set as my Ubuntu Samba PDC address.
I haven't been able to see anything odd in the smb.conf file that might cause this issue. I can connect directly to the shares using the samba network account that I created by going to start run and typing in the unc path.
Not sure what the cause of this issue is, I thought it might be a DNS issue on the client. One odd thing I noticed is that when I do nslookup using just the server name and not the FQDN i get a message in dos saying that the default server cannot be found but says that the server name for the [ipadress] cannot be found. It does list the correct ip.
I'm not sure what is causing the problem of stopping my xp client from joining the Ubuntu Samba PDC. I'm using UBUNTU server 10.04.
View 1 Replies
View Related
