Ubuntu Servers :: Allow All File-permissions For Everyone
May 11, 2010
on certain folders on a samba-server I would like to allow everyone everything.(Note: This refers to the filesystem-permissions. External security is cared for by samba. No problem here)That means: every local user and every remote user should be able to fully create, delete and modify every file in certain folders and all subfolder of these folders. This should include file contents and timestamps and permissions. And it should include modifying files owned by someone else, again meaning create/delete/modify/timestamp etc.
View 9 Replies
ADVERTISEMENT
Feb 23, 2010
I have a recently setup my first linux server (hardy) and am having problems with the permissions for a log file being changed. I believe this is caused by syslogd, but am not sure how to correct it. Bacula will report it is unable to start a backup because it is unable to open the log file (/var/lib/bacula/log) "permission denied". After changing the owner from syslog to bacula, the backup will resume. However, the following day I encounter the same problem because the owner of the log has been changed back to syslog.I see where the permissions for logs are altered in sysklogd, but I am not certain how to make bacula exempt or if this is the right approach.
View 1 Replies
View Related
Jun 9, 2010
Is it possible to have a text file somewhere that contains a list of all users that are allowed access to a given folder? This would be fantastic for file servers on a network.
View 1 Replies
View Related
Feb 8, 2011
Is ACL the best way to ensure the permissions of newly created files? Basically I have a directory: /data/department
I've done chmod g+s on it so the group is correct on new files but I want new files to also have 775 permissions so the rest of the group can access these files fully. Currently they are created with the default 755 (which I want still every where out side of /data/department ).
View 9 Replies
View Related
Mar 16, 2011
Trying to setup a file server for a small group of users and I am in need of help with file permissions with Ubuntu Server 10.10.
I have a single share mapping (ex /media/hdd1/share1). There are several folders that everyone will need read/write/edit permissions and there will be a few folders that all users will need read permissions and a couple of users will need read/write/edit permissions.
I have tried several things and as long as I create the folders/files through ssh using sudo, the permissions are fine, but when the users create file and folders through their computers (mixture of Windows and Mac) that user becomes the owner and no one else can write or edit those files.
I am using SAMBA and though it was a config issue with that but I logged each user directly into the server with the same issue.
I tried sudo chmod 777 /media/hdd1/share1 but all newly created files have the above issue.
View 1 Replies
View Related
Jun 30, 2011
What is recommended way to set permissions of folders VAR/WWW for use with apache in 11.04? I would like to let the user "ABC" have access to read/write the website files in this directory. How should permissions on these files be set?
View 2 Replies
View Related
Jan 14, 2010
This is probably a pretty basic question seeing as I'm pretty new to Ubuntu Server. I'm running a simple website from my Ubuntu Server machine with The files are all stored in /var/www/ and then subdirectories. The problem is that when I add files through FTP I need to go and change all of the file permissions since by default they do not have read access so can't be accessed through a web browser on another machine.How can I make the default permissions readable for the directory and all new files that will be moved in it
View 5 Replies
View Related
Aug 25, 2010
I'm working on a remote Ubuntu 9.10 server, which is accessed via VPN. I installed Joomla, but had difficulty uploading new components, which I traced to a file permissions problem. I used FileZilla to FTP onto the site and tried to make the chmod changes I needed, but the commands kept failing. Eventually, I contacted the sys admin and told him I thought that there was an ownership problem with the directories. He checked and told me that I was logging in with exactly the same user name and password that he was using (it's not a live system currently) and that he could make chmod changes without any problems. Because all my attempts were still failing, he eventually did the following:
chown -R administrator:administrator /var/www
/var/www is where all the Joomla files are stored and Administrator is the user name.Now I find that when I run a chmod command in FileZilla, the server reports that it worked (see below):
Status:Connected
Status:Retrieving directory listing...
Command:CWD /etc
[code].....
However, if I go back and check the tmp folder permissions, I find that they are still set to 777.This still looks like an ownership problem to me, but I don't understand why the server seems to think that the chmod changes are working, when they aren't.
View 4 Replies
View Related
Jul 28, 2011
I have a web server set up, and for a while I just let it show the default "test" page, but now I am wanting to actually show something of my own.
I downloaded a couple templates from the internet (free ones), and copied the first one to the /var/www/html folder (including subfolders for ./images and such), and it used an index.php file, but when viewing in my browser, it showed the actual text of the file, not the graphics and images and stuff.
So I deleted those files and "installed" the second template, which uses an index.html file instead.
I am once again getting the default "Apache is running but not configured" page again, even though I have verified multiple times that the index.html file is located in /var/www/html
if I include the index.html file in the path to my website, I get a 403 Forbidden, so I'm thinking it has to do with file ownership or permissions.
I placed the files there as "root", and have tried several combinations of possible permissions (root:root is the owner:group) without any luck.
View 5 Replies
View Related
Apr 27, 2010
I have a little problem: I have a share folder on Ubuntu server: - Dump That folder is share with SAMBA and everyone can put files on it
My problem is the following: When someone create a folder, the folder permissions are automatically set with:
(let's take my username: Yann)
Owner: Yann
Group: Yann
Clearly that's wrong.. I want the Group to be auto set has "users" so everyone can access the folders on that share. Anyone know how to change this ? chmod and chown is getting a bit boring
View 2 Replies
View Related
May 5, 2010
I had a major raid event recently which caused my Ubuntu 9.04 server to recover part of its file journal on the system partition. This caused some of the file permissions to go all funny and I now need to change them manually.
What the file permissions should for the following folders:
/etc/
/home/
/lost+found/
/mnt/
/root/
/sbin/
/srv/
/tmp/
The server is running and I fixed the some of the ownership issues already. I use a basic LAMP setup with samba, and proftp.
View 2 Replies
View Related
Jun 26, 2011
Looking for some help writing a simple script on my dapper server. I want the script to play a short 5 second wmv sound file. So I can tell another program to run the script. What player can or should I use and how can I set permissions on the file and script so my program has access to it . Total newb here
View 2 Replies
View Related
Jan 23, 2011
Every time I try to change file or folder permissions on a separate internal drive in ubuntu 10.10 desktop in sudo file manager, It sets it right back to the way it was before and doesn't save the permissions I want to change it to. The files aren't critical system files that are not even existent on this hard drive.
Its on a completely separate drive, Yet aren't I suppose to be in control of what gets changed to what? Instead of a Operating System doing something just for my safety? A simple AVI files permissions being changed shouldn't hurt anything. How to I stop ubuntu 10.10 from auto setting the permissions of my folders and files? Its really starting to me off right now. I've been looking around on google for Auto reset permissions for ubuntu, Haven't found one word about it. Yet I'm just going to assume someone might know how to resolve this? Or has dealed with this before.
I'm just trying to Forcefully set my folders on my separate drive all to 777 because they are all 775 and 755 and I can only access them with Write privileges if I run the SUDO file manager which I really hate having to do every so often I'm sure you can relate to how annoying it is to have to open up terminal and type something in to open a fully priviledged file manager.
View 5 Replies
View Related
Mar 16, 2010
I encountered a problem when I am trying to access my phpmyadmin the error came up: Wrong permissions on configuration file, should not be world writable!
View 6 Replies
View Related
Oct 16, 2010
Finally I managed to install my printer/scanner drivers.The last thing I need to do is to add the following two lines to 40-libsane.rules (which is a read only file):# Brother scanners ATTRS{idVendor}=="04f9", ENV{libsane_matched}="yes".How can I change permissions for this file or add these lines without changing permissions?
View 2 Replies
View Related
Feb 1, 2011
Now I have set up a terminal server at work, with Ubuntu 10.04LTS and Free NX terminal server. All works great, over all expectations. But I have some file permission problems. In the home folder I have mad a folder where files that all users should have full access to is put. The problem is that when a user puts a file there, only that user have full access to that file, other users only have read rights. How can I make it so that all files put in this folder have full rights for members in the group "staff"?
View 3 Replies
View Related
Aug 23, 2011
How do I show a list column in file roller that shows permissions and ownership of files?
View 2 Replies
View Related
Sep 20, 2015
I want to back up an entire Linux system on a 3Tb external Western DIgital USB3 drive.
I do not want to reformat it from what it is, apparemtly NTFS.
Is there a utility that can act like a file manager like mc, that will permit me to create an ever expanding (to 320Gb) TAR file that will retain all the original file permissions. I have had nothing but disappointment with Linux backup utils with a FAT32 external drive, and I am concerned if I just try an tar the entire drive at once, with around 3 million files, I might run out of memory.
View 5 Replies
View Related
Apr 6, 2010
I have an ntfs partition that I wish to access as a normal user(non-root). For this I did the following. As root I created a folder /windows and did a chmod 777 -R on /windows. Then I added the following line to /etc/fstab
Code:
/dev/sda3 /windows ntfs-3g defaults,nosuid,nodev,umask=000 1 0
Now, the partition is mounted alright but the problem is that when any other user (non-root) creates a files in /windows (say by executing touch newfile) the newly created file has the owner and group set as root. The non-root user can create the file and he can also delete the file, however, he cannot change the permissions of the file and also the owner:group is always set as root:root. How do I get across this problem, i.e. how do I mount a partition, so that a non-root user can also change the permissions and ownerships of the files he creates.
View 2 Replies
View Related
Jan 6, 2011
I have system at work I am setting up that runs on linux, it was powered up back in september but we didn't get the details to configure until this week, unfortunatly var filled up with 100% spaced used due to a log file that keeps being written to until its intizilized, I can't just delete the file so (will not be recreated), I pulled it off and took it home and split it into a smaller file (from 740mb down to a 15mb chunk)I'm really just a linux newbie so can someone explain to me what the permissions are on the current file and then what chmod would make smaller file the same. clusternet.log is the orginal and clusternet1.log is the one i made from split. I know its read, write and execute (whats the r write after x on clusternet.log?) but I'm not sure on what it means in the position its in, the clusternet.log should have permissions only for root correct?
Code:
-rw-r--r-- 1 luke luke 16613376 2011-01-06 20:10 clusternet1.log
-rwxr----- 1 luke luke 740130816 2011-01-06 06:39 clusternet.log
View 3 Replies
View Related
Jul 7, 2009
i am trying to set the file permissions for the log files "/var/log/Xorg.0.log" and "/var/log/gdm/:0.log". These files seem to be created when a user logs into a whokstation (my guess so far). I am trying to comply with a security mandate that all log files in the directory /var/log are set to 0640. The two mentioned files always seem to have the permissions 0644, does anyone know where and when these filea are created and how I might set the permissions when the files are created
View 1 Replies
View Related
Mar 10, 2010
Trying to set up a VPN on my seedbox. I get an error when I try to start it.
I followed this guide: [URL]
Here is my server.conf:
Code:
#################################################
# Sample OpenVPN 2.0 config file for #
# multi-client server. #
# #
[Code].....
View 7 Replies
View Related
Jan 13, 2010
I have a LAMP server running Ubuntu 8.04.03 Server edition running smoothly. Ive setup several websites on the server and all are ok, but I constantly have trouble with permissions. Everytime I setup a new domain to host, I setup a user specific to that domain. This allows SSH login specific to the domain. The problem I have is that every time I setup ownership in the virtual directories for the users they belong to, the settings don't seem to stay. Initially it seems to work ok, but when I install Joomla and setup the webspace, I always seem to have to login to the server itself to chmod the folders I need to have writable. I cant chmod properly from my FTP client which is weird. How to manage permissions?
Currently I am doing the following:
Code:
sudo mkdir -p {name of domain}/{public,private, etc...}
sudo usermod -g www-data {my user name}
sudo chown -R www-data:www-data /var/www/{directory for the domain}
sudo chmod -R 775 {folder path I need to change}
This works for a while but as I add new things to Joomla and I want to modify the folders, I always have to go back and redo the chmod and the chown commands to get them where I want.
View 4 Replies
View Related
May 27, 2010
i'm having issues with a folder which I cannot write to or seem to do anything else with? i figured i'd delete it and start again but i can't even do that!!
Code:
server@server:~$ sudo chown server /media/server/swap/downloads/incomplete/
chown: changing ownership of `/media/server/swap/downloads/incomplete/': Operation not permitted
[Code]....
View 5 Replies
View Related
Feb 27, 2011
I am running Ubuntu server with an SSH server installed. How can I create an ubuntu user and give that user permissions to read and write only 1 specific folder so someone can log in through SSH using the new username and only put files in the folder I specify?
View 2 Replies
View Related
Feb 18, 2010
I am trying to get a start up script to work, I have a file /etc/init.d/blah (with 755 permissions) with the contents [URL]. I have run "update-rc.d -f blah defaults". But when I reboot the script is not executing.
View 1 Replies
View Related
Feb 21, 2010
I got two ubutnu servers running side by side, I need to transfer several dir's of files, incl sub dirs to the other server via ftp and retaining the file permissions and dir structure. Both servers have ftp access, I am assuming theres an ftp command I use on the destination server to connect to the source server and retrieve the files? All the files reside in the one dir and need to be copied to the same dir on the destination server.
View 1 Replies
View Related
Mar 13, 2010
when I try to access [URL]... I get an exception:
[code]...
I believe I need to change some directory permissions, but I can't determine exactly what.
View 1 Replies
View Related
May 11, 2010
How can i find all of the files on the server with permissions 777?
View 2 Replies
View Related
Jun 18, 2010
I am running Ubuntu Server 10.04 LTS with Kernel 2.6.32-22-generic-pae I was originally using usbmount to autmont the western digital external usb drive I had attached to the system and it was working great. However, while I was adding files to the drive i deleted all of the directories and files that came on the drive out of box such as 'autorun.inf' and an autorun directory containing an icon for the drive.. when I rebooted the drive was no longer mounted, I tried to un/reinstall usbmount a few times but it still didnt work, so I wound up adding the drive into my fstab, my fstab line reads like this
[Code]....
View 2 Replies
View Related
