Trying to set up a VPN on my seedbox. I get an error when I try to start it.
I followed this guide: [URL]
Here is my server.conf:
Code:
#################################################
# Sample OpenVPN 2.0 config file for #
# multi-client server. #
# #
[Code].....
I am following this guide on setting up an Openvpn but having a little issue with permission denied.
I am at this step 'Initialize the Public Key Infrastructure (PKI)'
Code:
cd /etc/openvpn/easy-rsa/2.0/
. /etc/openvpn/easy-rsa/2.0/vars
. /etc/openvpn/easy-rsa/2.0/clean-all
[Code]....
I'm trying to get OpenVPN working but when I try to bring my br0 interface up it gives me an error.The below messages is from when I run
Code:
/etc/init.d/networking restart
Code:
root@server:/etc/openvpn# /etc/init.d/networking restart
* Reconfiguring network interfaces... ssh stop/waiting
ssh start/running, process 28263
[code]...
I have many openvpn implementations. Every time I use windows shares over openvpn, the speed is no more than 500KB/s, in LAN environment. When I start a copy it reaches 200-300KB/s, when I start second one it reaches 500KB/s. No more is reached after more copies simultaneously. When I use linux to copy files - the first copy reaches 700KB/s, the second copy reaches 2.5MB/s (then the first grows also to 2.5MB/s), the third copy reaches also 2.5MB/s. All of these are copied simultaneously, otherwise when only one is started it sits on 700KB/s. Moreover when 2 of the 3 simultaneous copy processes end, the one left backs at 700KB/s again.
But this is linux. When I use Windows the transfer speed is no more than 400-500KB/s (LAN environment).
The OpenVPN server is always ubuntu (any version - I've tried 6.06, 8.04, 10.04).
Tried the OpenVPN client in ubuntu (and the windows machine behind the ubuntu), in windows (directly installed the client on windows) and it is all the same - no more than 500KB/s.
I can not use this because it is so slooow. When only one file is copied at a time it reaches only 200KB/s!!! Searched all the google results - no one have an answer, although there are many people with the same problem.
Now, I am sure that the problem is in Windows, because when I use linux as a server and as a client, the client copies fast. But when I use windows as machine behind the client it copies slow. I don't know... something in the tcp/ip settings in windows or something...
Just curious to see what everyone's opinion on using routing vs. bridging for openVPN. I'm installing openVPN on a linux box that I'm using as a router. What I was wondering was your opinions on which one of these two options to use.
View 2 Replies View RelatedI am playing with openvpn, and I got stuck.I am using ubuntu server for openvpn server, which has 2 physical NICs, one is directly on internet and other is LAN, where few pcs are connected on.
View 5 Replies View Relatedi have setup Open VPN on Ubuntu 9.04, generated the key and have it running successfully on the server end. I download the open vpn client for windows, copied over the key ca and cert file and connected to the erver. All went well and the open vpn gui said its connected to the server (green comp icon in taskbar) and it said in a ballon it assigned me an ip of 10.8.0.6 it all looks good... BUT i have no vpn access... The virtual adapted in windows is not able to pull an actual IP/gateway and such...
[Code]...
I've setup openVPN using bridging following these guides
[URL]
I'm running Ubuntu Server 10.10 My clients can connect and get their own IP within my ip range (192.168.1.x) They can ping each other and I've tested I can use the connection a lan game and a windows RDP connection. The problem is I cannot access any of the actual local network devices except the vpnServer. Is their something else that needs to be done to allow full network access?
I have OpenVPN setup and running on my home server (Lucid Lynx). I move around alot and use Portable OpenVPN to connect to my home server. The problem is a lot of the computers I use I do not have admin rights to install the necessary routes to connect. So my question is this. Can OpenVPN be configured to use PPTP protocol? Because I have PortableVPN on my U3 flash drive and that VPN client does not need admin rights to run. If OpenVPN cannot do this, and from my understanding of its archetecture it cannot, but I must admit i am no authority on the matter. Can you suggest a workable solution, ie. install and setup this server software and use this portable client software.
View 1 Replies View RelatedI have a few issues after setting up Openvpn. At work i just setup a new Ubuntu Server 10.4. The server itself is working Great. I ended up getting Openvpn installed and working to a point. I have searched online and done as much reading as i could find but i keep running into the problem of not understanding. So here is the problem.
The server is set on a static IP address. At first i tried to have the config file listen on a virtual ip address i setup up in /etc/network/interface but that ended up not working so i set it to its specific ip address. I kept running into the error about script security while trying to start Openvpn. I tried to add into the config file "script-security 2" that way the up.sh and down.sh scripts were allowed to be run. That didn't help and then i kept trying to run Openvpn manually running the command
Quote:
And i kept getting a message
Quote:
So what i did was just comment out the "up" and "down" scripts in the config file. This allowed me to actually get Openvpn started on the server. So once this was done i connected form a client machine and was given an ip address like i should. The only issue is that i was not able to actually comunicate with the server. I have a samba share on there to allow me to copy files back and forth but an not able to actually communicate with the server at all. I should note that this is a web server that i can view from the outside. (actually get to the webpage) but i tried to access the website and share via the Openvpn gateway. I also tried to access the website portion using the hostname with no luck.
By the way, prior to putting the server on its separate network i was able to access the webpage and the samba share using both the ip address and the hostname.
I recently loaded up my old powermac g3 with debian 6.0 PPC, and it seems to be running quite good. I control it using ssh from my windows 7 box. I installed default-jre, so I could run the minecraft server on there.
I've got two questions: I installed Openvpn, but I'm a bit confused on how to use it.. I want people to be able to connect to my vpn network over the internet, what configuration should I use, and could someone maybe link me a decent step by step tutorial?
secondly, when I tried to launch the server, it tried to generate a new map, but this is taking ages! on my desktop computer, it only took two seconds, but after over half an hour, it only got to 20% of "preparing spawn area" what could be wrong with this? Any reason why the java virtual machine would have performance issues? I have no clue.. I haven't tried copying over my smp map from my windows box yet, and launching that.. but I doubt performance will be any better. (my windows 7 machine is hosting at the moment for about 10 people)
I'm currently trying to set up OpenVPN on my Ubuntu Server, however I'm having trouble setting up bridging. I am following the tutorial for bridging that is located on the Wiki here: [URL] At the current time my /etc/network/interfaces looks like this (default from Ubuntu install):
[Code]...
I'm trying to run Web server (nginx, does not really matter) "behind" VPN tunnel (i.e., on VPN client - the idea is that Web server is available at VPN endpoint IP on VPN server). Stock Ubuntu 9.10 Server with stock openvpn 2.1. No network changes done, only ufw is enabled and IPv6 is switched off. I need this box to be available at main IP address, no default route for VPN tunnel.
Tunnel itself works nicely, no problems at all. Hand-made static routes work via tunnel just fine. Problem is in-going traffic - I can see that it at least comes via tunnel (via OpenVPN debug), but is blocked (or dropped) by firewall or kernel. As far as I know, specific VPN server does not filter anything and is used for running Web servers on other IPs. I think I might need to set up some sort of IP forwarding for tap0 device to localhost - but don't really know where to start.
Tried disabling firewall, making Web server listen on all IPs (from localhost to VPN tunnel) - no luck. The box is in another country and KVM will be time and money, so I really don't feel like experimenting. openvpn.conf (IPs are obscured, non-relevant options removed, based on recommended config for that server):
Code:
# Setup
dev tap
remote 1.2.3.4
port 5091
[code]....
Since yesterday I'm fighting with OpenVPN on Ubuntu 10.04TLS and I can not cope with the authorization of users from Windows 2008 AD server. It looks like this: Published 93.159.XX.XX IP address the router and all traffic directed to the internal LAN IP 10.0.1.210. Customers who will combine the different platforms are Mac OS, Linux, Windows XP, 7, Vista. The whole domain is for Windows 2008. Uploader authLDAP module, but I still can not connect, that is, not after entering the username and password from the W2K8 domain does not log
View 1 Replies View RelatedI am trying to setup an OpenVPN server in bridged mode (Ubuntu 10.04 Lts). The goal is for the clients to be able to reach all the servers behind Openvpn server's lan. I have followed the official OpenVPN guide for Ubuntu 10.04.
My network setup is:
Private lan: 10.90.90.0-255 255.255.255.0
Gateway: 10.90.90.1
Openvpn server ip: 10.90.90.8
Gateway public ip: 79.xxxxxxxxx
I have forward port 1195 to the Vpn server through my gateway firewall.Besides that no other firewall is running.I can connect and ping the server both from windows and ubuntu clients. The difference is that from windows I can reach the private lan but not from ubuntu clients.
I have an Ubuntu VPS running 10.10 x86_64
This is what is in my /etc/network/interfaces right now.
Code:
auto eth0
iface eth0 inet static
address 67.202.x.x
gateway 67.202.x.1
netmask 255.255.255.0
auto lo
iface lo inet loopback
My server.conf
code....
I can get the VPN server running and everything connects fine from the client. I just don't know how to tunnel all the traffic through the VPS because it involves making the bridge which I'm having trouble with. What exactly am I supposed to put in /etc/network/interfaces?
i have some problems with configuring openvpn tunnel connection to my openvpn server. I'm using static-key tcp connection. Network manager always said to me that connection could not be established. Also, when i try to run openvpn from terminal, i got some strange permissions problem:
Code:
openvpn --config config.ovpn
Mon Apr 5 15:48:37 2010 OpenVPN 2.1_rc19 i486-pc-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Oct 13 2009
Mon Apr 5 15:48:37 2010 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Mon Apr 5 15:48:37 2010 /usr/sbin/openvpn-vulnkey -q moj.key
[code]....
i just installed Fedora 12, clean without anything change in it. I opened services dialog, and the openvpn service have status:dead, however it shows that it is enabled.when i try to run it as:/sbin/service openvpn start.It write OK. However if check it:/sbin/service openvpn status it write that service not running. What is a point of a problem? I have opened openvpn in FireWall,however without success, may be some additionsl services for openvpn are not running?
View 1 Replies View RelatedI had configured openvpn in my fedora 7. every thing seems ok. created all server,client certificates. and at client laptop i am using win xp. i installed vpn at client laptop n vpn is connected and client got the ip address of the range which i had defined in server.conf.
Now the problem is this that client vpn is connected and got the ip even than client not able to ping local network of my office.guys ur support n guidance needed.
I am trying to setup a VPN on my FC 12 box. Looks like getting openvpn to work behind NAT is as easy as just forwarding the ports. Do I need to forward any specific protocols (GRE, etc)? Also, can I do this with one Ethernet port (IE: RJ-45 jack), or do you recommend a second ethernet port? I could add in another PCI ethernet card if it makes it easier. Anyone know if a single ethernet jack will work or do I need two?
View 2 Replies View Relatedwhat is the best way here? I have like 5 servers, and I want my clients to access each of them, so in case 1 server is down, they can access remaining servers. Also, it will work like user1 chooses the server number and is connecting to a central database, then reply is OK, and he can connect to the server number he wished.
View 1 Replies View Relatedi have installed openvpn and config it for a tunnel. my server.conf and client,conf is as follow:
server.conf
port 1194
proto udp
[code]...
I want to configure a VPN over the Internet.I installed the 'openvpn' package, generated the key file, transfered it by a secure way to the client, and setted up the configuration file.
So, in that configuration file I input the IP addresses of the tunneled interfaces. Both IPs are static in the tunnel.
Then, I've heard somewhere that I can assign a dynamic configuration IP for the client. I do this registering a range.
Well, when I tried to change static IP to dynamic IP (changing '192.168.0.2' to '192.168.0.0/24') in the configuration file, the OpenVPN didn't work.
Obviously I don't know what I'm doing, and I really, don't believe that simply changing the IP will make it work, but I tried.
I hope I explained my problem as well.
My configuration file:
# OpenVPN Server Configuration File
dev tun 0
ifconfig 192.168.0.1 192.168.0.2
cd /etc/openvpn
secret key_file
In client I execute the 'openvpn' without the '--daemon' parameter.Then I want that my client uses a IP in a range (192.168.0.0/24, for example), instead of a static IP (192.168.0.2).I also thought to use a DHCP server, but I'm not sure that will work.
I finally got the certs to configure:
openvpn --config server.conf
Tue May 3 17:26:27 2011 OpenVPN 2.1.1 i686-redhat-linux-gnu [SSL] [LZO2] [EPOLL] [PKCS11] built on Jan 5 2010
Tue May 3 17:26:27 2011 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
Tue May 3 17:26:27 2011 Diffie-Hellman initialized with 1024 bit key
Tue May 3 17:26:27 2011 TLS-Auth MTU parms [ L:1542 D:138 EF:38 EB:0 ET:0 EL:0 ]
Tue May 3 17:26:27 2011 ROUTE default_gateway=192.168.122.1
Tue May 3 17:26:27 2011 TUN/TAP device tun0 opened
Tue May 3 17:26:27 2011 TUN/TAP TX queue length set to 100
Tue May 3 17:26:27 2011 /sbin/ip link set dev tun0 up mtu 1500
Tue May 3 17:26:27 2011 /sbin/ip addr add dev tun0 local 10.8.0.1 peer 10.8.0.2
Tue May 3 17:26:27 2011 /sbin/ip route add 10.8.0.0/24 via 10.8.0.2
Tue May 3 17:26:27 2011 Data Channel MTU parms [ L:1542 D:1450 EF:42 EB:135 ET:0 EL:0 AF:3/1 ]
Tue May 3 17:26:27 2011 Socket Buffers: R=[114688->131072] S=[114688->131072]
Tue May 3 17:26:27 2011 UDPv4 link local (bound): [undef]:1194
Tue May 3 17:26:27 2011 UDPv4 link remote: [undef]
Tue May 3 17:26:27 2011 MULTI: multi_init called, r=256 v=256
Tue May 3 17:26:27 2011 IFCONFIG POOL: base=10.8.0.4 size=62
Tue May 3 17:26:27 2011 IFCONFIG POOL LIST
Tue May 3 17:26:27 2011 Initialization Sequence Completed
But openvpn still won't start; where to go from here.
Tue May 3 17:54:25 2011 TCP/UDP: Socket bind failed on local address 192.168.122.3:1194: Address already in use
Tue May 3 17:54:25 2011 Exiting
I have to ubuntu machine (9.10 and 10.4) with a openvpn tunnel between them.This is the situation:
Code:
NetworkA 192.168.0.0/24
|
UbuntuA br0:192.168.0.3 (openvpn bridge between eth0 and tap0)[code].....
UbuntuA has one only interface etho and there are two openvpn instance: one bridge istance with br0 and another instance with tun0.
UbuntuA is not the gateway for networkA. UbuntuB is the gateway for NetworkB.I need to comunicate between pc on networkB e those on networkA.This is the "ping situation" (no pc tested has an active firewall):
ubuntuA vs ubuntuB: OK
ubuntuB vs ubuntuA: OK
pc on NetworkA vs ubuntuA and ubuntuB: OK[code].....
on certain folders on a samba-server I would like to allow everyone everything.(Note: This refers to the filesystem-permissions. External security is cared for by samba. No problem here)That means: every local user and every remote user should be able to fully create, delete and modify every file in certain folders and all subfolder of these folders. This should include file contents and timestamps and permissions. And it should include modifying files owned by someone else, again meaning create/delete/modify/timestamp etc.
View 9 Replies View RelatedI have a LAMP server running Ubuntu 8.04.03 Server edition running smoothly. Ive setup several websites on the server and all are ok, but I constantly have trouble with permissions. Everytime I setup a new domain to host, I setup a user specific to that domain. This allows SSH login specific to the domain. The problem I have is that every time I setup ownership in the virtual directories for the users they belong to, the settings don't seem to stay. Initially it seems to work ok, but when I install Joomla and setup the webspace, I always seem to have to login to the server itself to chmod the folders I need to have writable. I cant chmod properly from my FTP client which is weird. How to manage permissions?
Currently I am doing the following:
Code:
sudo mkdir -p {name of domain}/{public,private, etc...}
sudo usermod -g www-data {my user name}
sudo chown -R www-data:www-data /var/www/{directory for the domain}
sudo chmod -R 775 {folder path I need to change}
This works for a while but as I add new things to Joomla and I want to modify the folders, I always have to go back and redo the chmod and the chown commands to get them where I want.
I have a recently setup my first linux server (hardy) and am having problems with the permissions for a log file being changed. I believe this is caused by syslogd, but am not sure how to correct it. Bacula will report it is unable to start a backup because it is unable to open the log file (/var/lib/bacula/log) "permission denied". After changing the owner from syslog to bacula, the backup will resume. However, the following day I encounter the same problem because the owner of the log has been changed back to syslog.I see where the permissions for logs are altered in sysklogd, but I am not certain how to make bacula exempt or if this is the right approach.
View 1 Replies View Relatedi'm having issues with a folder which I cannot write to or seem to do anything else with? i figured i'd delete it and start again but i can't even do that!!
Code:
server@server:~$ sudo chown server /media/server/swap/downloads/incomplete/
chown: changing ownership of `/media/server/swap/downloads/incomplete/': Operation not permitted
[Code]....
Is it possible to have a text file somewhere that contains a list of all users that are allowed access to a given folder? This would be fantastic for file servers on a network.
View 1 Replies View Related
