Server :: Samba 3.3.8 Upgrade To 3.5?
Dec 17, 2010
i am running centOS 5.5 with samba 3.3.8 I have enabled wins to see if i can get my windows workstation to be able to browse for the samba server and also be able to ping by hostname. I don't know if i have missed something in the config but I was going to upgrade to see if its an issue with 3.3.8.
if an upgrade is the solution can someone give me a how to on the upgrade. I used yum install samba3 to install it and found a how to to install 3.5 but the how to said i need to in all them ./configure command as the original install and it should install over 3.3.8. I don't know how to find that because i used yum.
View 2 Replies
ADVERTISEMENT
May 4, 2010
I upgraded the samba on Ubuntu Server 8.04 to 3.5.2 so Windows 7 would be able to log into the domain. Now Samba isn't using ACL permissions and I can't alter the ACL with the Windows security dialog. All the permissions still show correctly on the server. Did something change with Samba 3.5.2? How to get the ACL to work with Samba 3.4.3 or newer?
View 3 Replies
View Related
Mar 25, 2009
I have a perfectly functional Samba file and print server. I will be adding several Window 2008 servers to serve as terminal server hosts running in virtual machines. I would like to convert my Samba server to a PDC (Primary Domain Controller) for these terminal servers to use. And leave everyone else as a work group (the current situation). I'd like to
1) use /etc/password and /etc/samba/smbpasswd as the source of the user accounts
2) limit what users the terminal servers can see based on a particular group (/etc/group)
So far I have tried the example howto's on the samba site and wound up having to restore /etc/nsswitch.conf in rescue mode.
View 3 Replies
View Related
Mar 12, 2016
Following yesterday's and then today's upgrade of my Debian 8 32-bit system (among other things to samba 2:4.1.17+dfsg-2+deb8u2 (yesterday: ...deb8u1)) I cannot connect my Mint 17.3 laptop to the server anymore. Were there any changes to smb.conf regarding authentication or other aspects that might lead to this problem? I am enclosing part of my smb.conf. By the way - I also have trouble using ssh to connect to the Debian machine, such as the ssh-command taking "for ever" and then getting the message "Write failed: Broken pipe" when entering an ls-command on the command line.
H. Stoellinger
smb.conf:
[global]
workgroup = RAINERMUSIK
netbios name = hsdesk
server string = Samba Server hsdesk
[Code] ....
View 1 Replies
View Related
Sep 15, 2010
A very strange thing happened to me today after upgrading a Lenny server to Squeeze. All seems to be working great except for the fact that I cannot join the server to our domain (made a work copy of the virtual machine holding Debian, upgraded that, renamed and changed IP).
The problem I'm having is related to Samba as far as I can tell. On the Lenny server(s) I have the 'net' command to join a server to a domain but not on the upgraded version (Squeeze). It just says command not found and there's indeed no 'net' in /usr/bin where it's supposed to be.
I imagine that something went wrong upgrading Samba although the rest works, the daemons are running, kerberos works (kinit, klist), and so on, I only miss the net command.
Is there a way to install that separately or which package do I have to reinstall (samba-common, sambafs, ...)?
I have other servers (clean install and upgrade from Lenny to Squeeze) that do have the command in /usr/bin. Can I just copy it over from one to another or do I have to remove and reinstall Samba all together?
View 1 Replies
View Related
Feb 8, 2010
I need to know is there any way to record or tracking or make logging if when user samba delete files or folders i can know that, cause sometimeon samba server some users complain they lost files, though i have daily backup and i can restore their files, i just want to know if or maybe some other users in one group accidentally move or delete the files.
View 1 Replies
View Related
Oct 8, 2009
I have to rename a group of machines in my little samba domain (tbd backend) but there is an ugly bug that makes this impossible. have set 'rename user script' variable corectly, also checked all configurations.When i change computer name in my windows box, it shows an error saying something like "Error calling remote procedure"Looking on server side, username for the machine gets correctly changed in /usr/passwd, and also in samba database.But samba log says:
===============================================================
[2009/10/08 11:10:32, 0] lib/fault.c:fault_report(42)
INTERNAL ERROR: Signal 11 in pid 11052 (3.0.33-3.7.el5_3.1)
[code]....
View 3 Replies
View Related
Oct 20, 2010
I would like to configure an access to folder
/fileserver
for two services : Samba and VSFTPD
How to do it ? How to create folder rights that samba and ftp user will have an access (read/write/delete) to all directories in /fileserver.
My system is CentOS. I`m starting samba and vsftpd like a root (/etc/init.d/vsftpd start etc.)
View 1 Replies
View Related
Sep 23, 2010
I'm having some trouble getting samba to work properly. I'm following this tutorial [URL] when I run
Code: sudo smbclient -L localhost I receive the following: Code: Enter root's password: Anonymous login successful Domain=[SAMBA] OS=[Unix] Server=[Samba 3.4.7]
tree connect failed: NT_STATUS_END_OF_FILE I'm lost!
View 3 Replies
View Related
Nov 25, 2009
Automatic upgrade ver 10 to 11 Have a large drive that is shared over Windows domain.This was renamed from /media/drive/ to /media/7534179143A7E34 All the users in Windows domain can not access the files or folders on the Fedora server - Samba setup. Why was the deive renamed and is this causing problems. I reshared the folders on the drive but still cannot access the drive. Where do I start to fault find please.
View 2 Replies
View Related
Mar 25, 2010
I want to upgrade my current samba 3.4 version to 3.5. I try my best to search on other linux forum but not get simple steps solution of upgrading samba version..
View 3 Replies
View Related
Jan 11, 2010
We got windows 7 machines in our network so not able to joint them into samba domain. please guide me step by step how to upgrade samba 3.0 to 3.3.
View 2 Replies
View Related
Jul 12, 2010
I have a LAN with a number of computers including an iMac and a PC dual booting with 10.04.
I recently did an upgrade to 10.04 from 9.10 on both computers.
Under 9.10 I could easily browse either computer using Samba.
Now under 10.04 Samba just does not want to work and won't connect from either computer to the other.
View 2 Replies
View Related
Oct 10, 2010
I had a working server 9.04 on my network and I could access shares via Samba and MacFusion from Windows, ubutu and mac boxes. After the upgrade I can not access shares via Samba, I can ssh in it just fine (no change there) also Macfusion mounts the paths just fine.
Anybody had this problem with the upgrade? It must be samba everything else is working (also I can't access any files from my Ubuntu Laptop running 10.10 Desktop edition)
Here is my smb.conf file:
[global]
workgroup = WORKGROUP
server string = %h server (Samba, Ubuntu)
wins support = yes
; wins server = w.x.y.z
dns proxy = no
[Code]...
View 9 Replies
View Related
Dec 6, 2009
After upgrading to FC12 from FC10 the 3 samba shares on the box cannot be connected to from either Windows-7 or Windows Server 2003R2. Both were working with FC10 just fine.
It is local authentication to the box not LDAP etc. Files below and error msg:
attempting to connect to say \saturngeorgek gets an error in a windows popup with Unknown username or bad password yet I'm certain of the ID & password as I can ssh in with it from Windows-7
In 2003 I see "Multiple connections to the same server or shared resource by the same user using more than one name are not allowed disconnect all previous connections and tr again."
In neither case do I have any connections to the saturn server that I can see using net use from either box.
smb.conf
========
[global]
workgroup = netwrx1
server string = Saturn RHFC4 Linux Server
[Code].....
View 4 Replies
View Related
Dec 11, 2009
I have just upgraded to FC 12 from FC 11 everything on FC 11 was fine, I has samba, openvpn, subversion, tinyproxy and apache all working fine. Friends could vpn in and do all the stuff they where allowed to do,
Now unfortunately I have this issue after upgrading to FC12, All the samba mounts have disappeared from all my friends computers, when I look at the log files I now see this;
smbd/server.c:457(smbd_open_one_socket)
smbd_open_once_socket: open_socket_in: Address already in use
View 1 Replies
View Related
Feb 8, 2010
I've just upgraded my main file server from 10.3 to 11.1 by DVD (I did *not* have a chance to do a zypper up after, so it's the base 11.1 install), and in upgrading my Samba from 3.0.23b to 3.2.4, I seem to have broken winbind resolution of group names. wbinfo -g shows all the right group name entries, and getent group shows that they map to the proper GID numbers... it's just that ls isn't seeing them: I get domain usernames, but the group column is 5 digit numeric GIDs in my defined range. I infer that something broke PAM, but I'm not enough of a PAM jockey to know what. I don't have a pam.d/winbind, but I'm not clear that I'm supposed to. I see that the four pam.d/common-* files were touched, but their contents are the same as the older ones I have.
View 6 Replies
View Related
Jan 12, 2010
Last night i updated to 9.10, all good except i can no longer access my samba shares!!
here is the info from log.smbd after i stared it this afternoon
Code:
smbd version 3.4.0 started.
Copyright Andrew Tridgell and the Samba Team 1992-2009
[2010/01/12 16:35:57, 1] param/loadparm.c:6355(map_parameter)
Unknown parameter encountered: "executable"
[2010/01/12 16:35:57, 0] param/loadparm.c:7449(lp_do_parameter)
[Code]....
View 6 Replies
View Related
Mar 14, 2010
I have a file server running samba 3.4.0. I just upgraded ubuntu to 9.10. The upgrade was unfortunately stopped in the middle, but I think I managed to complete it.The problem is that now samba will not work after a reboot. The daemons are running, but any attempt to connect from a windows machine fails (Windows 7: the network path was not found). Manually restarting the service fixes the problem, but I need a more stable solution!Interestingly, I can ssh to the machine, or rdp to a virtual machine running on it.The logs don't seem to report any error:
Code:
stefano@SERVER02:/var/log/samba$ tail log.smbd
[2010/03/14 04:02:11, 0] smbd/server.c:1068(main)
[code]....
View 5 Replies
View Related
May 27, 2010
provide support for a small business that uses Windows machines to access files stored on an Ubuntu server which has just been upgraded from 8.04 to 10.04 (32 bit version). Before the upgrade the users accessed their share by this batch file:
Code:
net use x: \servernamesharename /user:username
This would then prompt the user for his or her password which they would enter to allow them access to the share.Since upgrading to 10.04, the user gets a "system error 58" stating "The specified server cannot perform the requested operation"If the batch file command is changed to:
Code:
net use x: \servernamesharename
The same error message is given. The only work around I have found is to modify the file to read:
Code:
net use x: \servernamesharename /user:username password
This is not ideal at all as it makes the password protection useless.When I performed the upgrade I left the smb.conf unchanged. The smb.conf file is:
Code:
#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
[code]...
View 7 Replies
View Related
Jul 17, 2011
I just upgraded to 10.04, as of this upgrade, samba has quit working.
From Windows I can ping the linux box (192.168.1.110) If from Windows I key in ->Start->Run->\192.168.1.110 I connect to my linux box.
If I try to access the linux box through the name, (\tardis) I get network path not found.
Everything worked fine before the upgrade, now I cannot see my linux box via its network name. I have a WD TV Live on my network and I must be able to see the linux box via its network name or I cannot connect to it.
iptables shows no rules
smbtree returns
SONCOM
\WINDOZE
\WDTVLIVE WDTV LIVE
Server requested LANMAN password (share-level security) but 'client lanman auth' is disabled
failed tcon_X with NT_STATUS_ACCESS_DENIED
[Code]....
View 9 Replies
View Related
Oct 25, 2010
Well over the weekend I took the plunge and upgraded. All was fine with Lucid. Well the upgrade was surprisingly straight forward. But, yep there is always a but. I though it had screwed up my samba totally, but no it hasn't. It is working just fine. I use firestarter to tweak my firewall, turn it off and all is fine.
I have told firestarter to open my local network, with a 10.0.0.1/24 (I can never recall is that right?) but it still ain't working. Have router doing firewall duties too, so not that bothered, but would like to know how to fix it. Before I upgrad my webserver box too.
View 1 Replies
View Related
Jan 6, 2010
Now that we are starting to face the reality of Vista/Win7 implementations, we will need to do an upgrade of Samba to enable functionality. I am having difficulty in upgrading our version of Samba (3.3.4), as I compile from source, and do not use binary distributions. I'm running Slack12 and could really use some help on how I can build samba from source and UPGRADE it easily?
View 1 Replies
View Related
Jun 14, 2010
I have CentOS 5.5 installed on my Dell D600. This release includes SAMBA 3.0.
Question: Is there a way to use yum to upgrade / install the latest version of SAMBA (3.5.3)?
A "yum search samba" shows there is only the "samba3x" release available - which is SAMBA 3.0
I've downloaded the SAMBA3-3.5.3-43.el5.i386.rpm package for Cent OS 5 from the SAMBA.org site, but when I try to install it, it fails due to package dependencies.
Short of downloading the source and compiling it myself, is there a better method to get the latest version of SAMBA installed on my system?
View 4 Replies
View Related
Jan 2, 2016
I just upgraded to jessie and now Samba won't let me log in anymore. I merged smb.conf manually. It now looks like this (removed comments):
Code: Select all[global]
  workgroup = WORKGROUP
  dns proxy = no
  bind interfaces only = no
  log file = /var/log/samba/log.%m
  max log size = 1000
  syslog = 0
[Code] .....
With smbclient logs as follows:
Code: Select allsmbclient -L 192...
Enter user's password:
session setup failed: NT_STATUS_UNSUCCESSFUL
If I provide a wrong password, it raises NT_STATUS_LOGON_FAILURE, also if retry with the correct password.
Not sure about what resolved the issue. But after I purged samba, reconfigured it, added the users AND set www-data's shell to bash again (which was changed during the update), it now seems to work
View 0 Replies
View Related
Mar 14, 2010
I just upgraded samba on my lenny-server:
apt-cache policy samba
samba:
Installed: 2:3.4.7~dfsg-1~bpo50+1
...and since then my windows xp clients cannot follow a symbolic link to a common area from their home folders.
I have googled and tried to add follow symlinks and wide links to my homes share
[homes]
= Home Directories
browseable = no
follow symlinks = yes
wide links = yes
...but after restarting samba on the server and rebooting the windows machine the user still cannot follow the link.
View 3 Replies
View Related
Jun 17, 2009
I was successfully using samba + fedora directory server in fedora 10 as a primary domain controller for my home network (achieved mostly by following barry905's instructions here: [url].
After upgrading to fedora 11, some of the pdc functionality no longer worked.
For example, when i ran 'pdbedit -Lv', i got:
Code:
I was able to fix this by adding to the [global] section in /etc/samba/smb.conf:
Code:
I also found that i could no longer join an xp computer to the domain. i discovered that for some reason, the samba administrator password had been cleared. after running:
Code:
That was fixed.
The last problem, which i have still not fixed, is that roaming profiles no longer work. when i try to do a domain login as user 'htpc' from an xp machine, i get the following message in xp:
Code:
Here's an excerpt of my /etc/samba/smb.conf:
Code:
View 14 Replies
View Related
May 13, 2010
A couple of days ago, I upgraded my Kubuntu to Lucid. In this phase, the system reported that it was impossible to upgrade samba-common, and the installation aborted on 90%. Nevertheless everything is working but KPakageKit, which reports:
"There are broken dependecies on your system. Please use an advanced package manage e.g. Synaptic or aptitude to resolve this situation."
Neither "sudo aptitude safe-upgrade" nor "sudo apt-get -f install" solved the problem:
omen@darkstar:~$ sudo aptitude safe-upgrade
[..]:
samba-common
kubuntu-desktop .....
So the problem is really samba-common.
View 3 Replies
View Related
Jan 29, 2010
On my computer, I mount at boot time through the /etc/fstab some shares.I was working flawlessly on 9.04 and previous version.Since 9.10 version, it sometime fails to mount the share and I need to run PHP Code:sudo mount -a to get my mount shared mounted. (the command "mount -a" always work).
View 3 Replies
View Related
Sep 22, 2015
I have just upgraded to Jessie and everything seems to be OK apart from printing from a windows machine to my print share. This was working previously under wheezy. I can print a test page from Cups without any problems, but when I try and print from windows, Samba seems to crash completely and is constantly writing these messages to the logs. Then I lose access to the other shares, presumably while it repeatedly crashes.
STATUS=daemon 'smbd' finished starting up and ready to serve connectionsPANIC: assert failed at ../source3/printing/printing.c(486): pjob->jobid == jobid
[2015/09/22 12:02:03.989596, 0] ../source3/lib/util.c:785(smb_panic_s3)
PANIC (pid 3704): assert failed: pjob->jobid == jobid
[2015/09/22 12:02:03.991930, 0] ../source3/lib/util.c:896(log_stack_trace)
BACKTRACE: 27 stack frames:
[Code] ....
View 0 Replies
View Related
