Ubuntu :: Server Static IP Setup But Still Giving Dynamic IP's
Mar 21, 2010I have setup like instructed in online tutorials.
Here is a copy of my interfaces file:
Code:
Code:
ADVERTISEMENT
Server :: Redirect VPS Domain / Static IP To Dynamic Dial-Up IP?
Oct 16, 2010got a VPS and for testing purposes a homeserver with apache running. what two tools would i need to redirect my static ip to my dynamic one?
the traffic shall all go through the dynamic one. i've got a domain name registered with the VPS also. nameservers are configured.
is there any setup required on my local (dynamic ip) apache settings for using the name? and if i stop the service, will it still work? do i have to setup a webserver on the VPS for it? none running yet.
Server :: OpenVPN Range Address / When Change Static IP To Dynamic IP In Config File OpenVPN Didn't Work?
Feb 13, 2010I want to configure a VPN over the Internet.I installed the 'openvpn' package, generated the key file, transfered it by a secure way to the client, and setted up the configuration file.
So, in that configuration file I input the IP addresses of the tunneled interfaces. Both IPs are static in the tunnel.
Then, I've heard somewhere that I can assign a dynamic configuration IP for the client. I do this registering a range.
Well, when I tried to change static IP to dynamic IP (changing '192.168.0.2' to '192.168.0.0/24') in the configuration file, the OpenVPN didn't work.
Obviously I don't know what I'm doing, and I really, don't believe that simply changing the IP will make it work, but I tried.
I hope I explained my problem as well.
My configuration file:
# OpenVPN Server Configuration File
dev tun 0
ifconfig 192.168.0.1 192.168.0.2
cd /etc/openvpn
secret key_file
In client I execute the 'openvpn' without the '--daemon' parameter.Then I want that my client uses a IP in a range (192.168.0.0/24, for example), instead of a static IP (192.168.0.2).I also thought to use a DHCP server, but I'm not sure that will work.
Networking :: Change Dynamic Ip To Static Ip?
Feb 11, 2010Fedora 12 64bit What will be the correct steps changing dynamic IP to static IP on F12 console, instead of on Gnome running;
System -> Administration -> Network -> Edit, etc.
I made following test;
Edited ifcfg-eth0
$ cat /etc/sysconfig/network-scripts/ifcfg-eth0 Code: # Attansic Technology Corp. Atheros AR8121/AR8113/AR8114 PCI-E Ethernet Controller
DEVICE=eth0
BOOTPROTO=static
[code]...
Debian :: Server Setup With Static IP Not Accessible
Jan 22, 2011I setup a server last night and was able to remotely connect to it and access the internet with it. However, now that I have setup /etc/network/interfaces so that the server will have a static IP address, I cannot access the server remotely. Also, from the server itself, I cannot access the internet. Ping provides "unkown host" for any website I try. How do I fix this?! I don't know why this is happening.
Here is my interfaces file:
Code: ...
#The primary network interface
allow-hotplug eth0
# also tried with and without auto eth0
# auto eth0
iface eth0 inet static
address 192.168.133
netmask 225.225.225.0
gateway 192.168.1.1 This is the only NIC on the server.
Here is ifconfig:
Code: eth0
Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx
inet addr: 192.168.1.133 Bcast:192.168.1.225 Mask:225.225.225.0
UP BROACAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txpueuelen:1000
RX bytes:0 (0.0 B) TX bytes: 0 (0.0 B)
Interupt: 29
Fedora Networking :: Change Dynamic IP To Static IP?
Feb 11, 2010Fedora 12 What will be the correct steps changing dynamic IP to static IP on F12 console, instead of on Gnome running;
[Code]....
Programming :: (PHP) Dynamic Or Static Content Generation
May 12, 2011My project looks like this:
Home
The Team [no-page]
-X
-Y
-Z
Projects [no-page]
-Coding [no-page]
--A
--B
--C
-Desing [no-page]
--E
--F
-Security [no-page]
--G
--H
Note: the Code/Design/Security projects pages (A,B,C,D...) will be at start around 35 pages, and will grow. My index.php is something like this:
PHP Code: .....
What I would like to know is how to build the content (the home-main.php)? Do it dynamically based on a link something like this index.php?page=coding_b, and put in the index.php page a number of 35 if/else statements to cover all the project pages or ... static, creating every page for the projects menu when I create the menu? I check if a page 'pro-co-a.php' exists, if not I create it based on some template and do the query to get the content from db or? How to organize the pages, if using static page?
General :: Wrap App With Dynamic Libraries Into One Large Static App?
Feb 24, 2011I have an old program that kind of depends on older dynamic libraries. They tend to get upgraded easily with distro's updates. I figured that there would be a script with using ldd that would gather the libs needed and create one bigger, statically linked application that wouldn't break so easily. If I could do this, a lot of older KDE libraries could be removed from my system and easen my life.
My distribution of choice is gentoo, but I'm looking for a general solution that doesn't depend on rebuilding anything. If it runs with libs on their path, I'm sure it can be made run with libs somewhere else!
Programming :: Looking For Tools For Static / Dynamic Code Analysis
Sep 11, 2010I am currently looking for tools for static/dynamic code analysis for embedded Linux system development (both device driver and user space apps). We will use Eclipse IDE and C++ lanuage. I hope the tools are easy-to-use, reliable, popular, better with good supports, and not-too-expensive. I already find a list of tools at WiKi, however, I don't have time to try them all. Could anyboy please recommend me a few? If you can tell me briefly about their pros and cons, that will be the bet.
View 1 Replies View RelatedGeneral :: Looking For Tools For Static / Dynamic Code Analysis For Embedded
Sep 11, 2010I am looking for tools for static/dynamic code analysis for embedded Linux system development (both device driver and user space apps). We will use Eclipse IDE and C++ lanuage. I hope the tools are easy-to-use, reliable, popular, better with good
supports, and not-too-expensive. I already find a list of tools at WiKi, however, I don't have time to try them all. Could anyboy please recommend me a few? If you can tell
me briefly about their pros and cons, that will be the bet.
Networking :: Set An Static Ipaddress On Network-scripts But Dynamic Ip Shows On Ifconfig?
Jan 27, 2010I recently installed fedora 12 in my server where I had a page published in my local net by tomcat, and I was looking on the Internet how to set up an static ip address and this is what I did
on /etc/sysconfig/network-scripts/ifcfg-eth0
# Broadcom Corporation NetXtreme BCM5751 Gigabit Ethernet PCI Express
#
# File: ifcfg-eth0
[code]....
then I can access via ssh by two addresses the one I got from dhcp (10.17.148.223) and the static one (10.17.148.26) I put ifconfig and and 10.17.148.223 appear on eth0 I restart my server and I just can access from 10.17.148.223 I have to put
ifdown eth0
ifup eth0
Again...to access by my static ip, y can access my page by its dns on my server, but I cant access from other computer...so, I guess when my static adress appears on ifconfig I would be able to access my page from other computer...
Ubuntu Networking :: Setup Ssh With Dynamic DNS - But Can't Seem To Get It To Work
May 19, 2010I've read some guides on how to setup ssh with dynamic DNS, but can't seem to get it to work. My Linksys router is currently set to forward port 22, so I don't know why SSH still gives:
ssh admin@xxx.hopto.org ssh: connect to host xxx.hopto.org port 22: Connection refused In particular, I also have openssh-server running on the target machine. Given that I have port forwarding enabled, why would this be happening? If I try to login directly to the IP, I get the same refusal.
Programming :: Static Linking Versus Dynamic Linking
Apr 18, 2010I have written an OpenGL based program which uses i.a. libjpeg that I want to link statically so I can send it to someone who doesn't have all the libraries needed installed to allow for a dynamically linked executable to run. As such I tried with giving the [b]-static[b] parameter to gcc.
Code:
x86_1$ make
gcc -O3 -c jpegloader.c
gcc --std=c99 -O3 -c --std=c99 -I/usr/include -L/usr/X11R6/lib main.c
[code].....
Why would gcc claim that I'm missing GLUT? This works perfectly fine when I do dynamic linking -- i.e. omitting the -static argument.
General :: Using Dynamic Libraries As Static Libraries?
May 6, 2010Is there any way to use a dynamic libraries as a static libraries instead when compiling, so that my resulting executable won't have them as dependencies?
View 3 Replies View RelatedProgramming :: Magazines Covering Topics Like "Static/Dynamic Lib", "Makefiles"?
Oct 12, 2010I have seen some Linux magazines covering topics like "Static/Dynamic Lib", "Makefiles", advanced concepts of "C/C++" etc. I would like to have some subscriptions of magazines dedicated to concepts like above.
View 2 Replies View RelatedUbuntu Networking :: Setup A Static IP If Have No Router?
Dec 1, 2010I am trying to set up SSH so that I can edit files on a home server (linux). I know this question has been asked many times before, but none of the answers seem to apply to me.
Here's my setup. I have the modem connected to a switch (wired) that connects 2 PCs to the internet (one desktop, one server, both wired).
All of the threads I see that discuss static IPs seem to require that I set up a router. Is this necessary? Can I still transfer files through a switch?
Software :: Can't Setup Static IP?
Jan 15, 2010Problem to setup static IP
Host - Fedora 12 64bit
KVM - virtualization software
VM04 - Fedora 12 64bit
[code]....
General :: Restricting Dynamic Ipaddress By Based On Dynamic DNS Host Names?
Dec 12, 2009I want to restrict the Visitors to my Webserver whom i want to give access But the persons whom i want to give access. have Dynamic IP. I want to use DynDNS and update IP address of person. Based on the Hostname Pointing to Dynamic address of person.
View 5 Replies View RelatedUbuntu Networking :: NM-Applet Static IP Setup On WLAN
Oct 7, 2010I'm trying to use the nm-applet tool get a static ip on my wlan. I've created a configuration and set up the IPV4 settings ok but I can't figure out how to stop nm-applet from creating and using the auto wlan configuration. I've tried deleting the auto config but it seems to recreate it when I try to use wireless again. How to make the manual config the default or permanently disable the auto (dhcp) config?
View 2 Replies View RelatedFedora Networking :: How To Setup Static Ip On 14
Jan 27, 2011i was trying to setup a static ip in order to forward ports but with no luck. I need to setup these:
- IP address: 192.168.1.2
- Subnet mask: 255.255.255.0
- Default gateway: 192.168.1.1
- Preferred DNS Server: 192.168.1.1
Networking :: Static Network Setup?
Aug 16, 2010I have a fresh install of Centos 5.x and I'm having issues on setting up the network...i know i have to edit/etc/sysconfig/network-script/ifcfg-eth0 and create an ifcfg-eth0:0 right?im just having issues getting everything setup correctly.my network setup:Router IP: 192.168.2.1IPs on network: 192.168.2.xNetmask: 255.255.255.0
View 3 Replies View RelatedProgramming :: Convert A Dynamic Library (filename.so) To A Static Library (filename.a)?
Nov 18, 2009How can we convert a dynamic library (filename.so) to a static library (filename.a) using gnu gcc . Can we get a static library form a dynamic library . I saw a few post in which the conversion form a static library to a dynamic library is mentioned but, unfortunately, not the other way.
View 4 Replies View RelatedNetworking :: How To Setup Static Routes - Gateway ?
Jan 18, 2011I have a temporary system up with wlan0 and eth2.
I want the eth0 address to be the gateway for accessing the internet on wlan0.
How do I setup static routes?
I'm not too keen with networking...
Code:
General :: Setup Static Ip Address Via Terminal?
Jul 12, 2011I imagine that there is already a thread for setting up a static IP, but I haven't been able to find it yet, so here we go.I have recently installed Fedora 15 on home machine. I have a very simple home network. Belkin wireless router with Window and Linux systems. The router is setup to be DHCP server. Router is setup to have lease time = Forever. Even with this setup, my router is assigning different IP address for my linux machine every time I boot the machine. So I would like to setup a static IP on my Linux.From my research so far, I'm suppose to make some changes to the file /etc/sysconfig/network-scripts/ifcfg-eth0. But I don't have this file in this folder. Should I just create this fil
View 3 Replies View RelatedSlackware :: How To Setup Persistent Static Routes
Mar 23, 2011how to setup persistent static routes in slackware? does slackware have some text file editing method like debian or redhat. ?
View 5 Replies View RelatedNetworking :: Setup Static IP Routes On 4 Debian Machines?
Oct 30, 2009I have 4 debian boxes networked together through a basic 5 port switch. I am trying to simulate 2 Local Area Networks joined together by a WAN. Right now I can communicate with A <--> B, B<----> C, C<----->D. However, I cannot communicate with Host A to Host D which is the whole point of this experiment. It has to be my static routing is not right. This is a confusing area to me. Right now my routes are
[code]....
CentOS 5 Networking :: DHCP Work But Not Able To Setup Static IP?
May 26, 2010I am having several boxex with centos on it. No pb. I have recently setup a new box with centos 5.4 and I am not able to get the network working on it when configuring a static ip.I've configured eth0 and dns using "setup": unsuccessfulI've used the network config GUI: unsuccessfulAnd it is working very well when I let the dhcp getting the setting.I need a static IP.Here is the getinfo output when static ip setup, and below it, the getinfo for dhcp setting
== BEGIN uname -rmi ==
2.6.18-194.3.1.el5 i686 i386
== END uname -rmi ==
[code]....
Fedora Networking :: Unable To Setup Etho With Static Ip Adress
Dec 10, 2010I'm not able to set up eth0 with a static ip adress.service network restart and it was okkay but when I try to turn off and turn on, the ip adress is set up with dhcp.
View 7 Replies View RelatedUbuntu :: Dynamic Ip On Server?
Feb 3, 2010I've got Apache installed so I can learn perl and php, and to show off, of course. I just realized last night that my IP isn't what it was three months ago.does anyone here have any experience with a dynamic IP program (like DynIP back in the day.) .. I've seen a few options, but I was hoping someone would have some experience.
View 5 Replies View RelatedServer :: Create SSH Server In Home With Dynamic Public Ip?
Jun 15, 2011i need to create a SSH server in my home and i should able to log in my SSH server over the internet from out site. what are the setup i have to do?
View 14 Replies View Related
