I'm trying to use the nm-applet tool get a static ip on my wlan. I've created a configuration and set up the IPV4 settings ok but I can't figure out how to stop nm-applet from creating and using the auto wlan configuration. I've tried deleting the auto config but it seems to recreate it when I try to use wireless again. How to make the manual config the default or permanently disable the auto (dhcp) config?
View 2 RepliesI have set at static ip on eth0:
In have configured the /etc/network/interfaces as:
Code:
auto lo
iface lo inet loopback
auto eth0
[Code]....
However, I experience a slow Internet connection when using wlan.
Is this a routing issue, or have I configured the /etc/network/interfaces config file wrong?
I use Ubuntu 10.04, 2.6.32-22-generic
I am trying to set up SSH so that I can edit files on a home server (linux). I know this question has been asked many times before, but none of the answers seem to apply to me.
Here's my setup. I have the modem connected to a switch (wired) that connects 2 PCs to the internet (one desktop, one server, both wired).
All of the threads I see that discuss static IPs seem to require that I set up a router. Is this necessary? Can I still transfer files through a switch?
i was trying to setup a static ip in order to forward ports but with no luck. I need to setup these:
- IP address: 192.168.1.2
- Subnet mask: 255.255.255.0
- Default gateway: 192.168.1.1
- Preferred DNS Server: 192.168.1.1
I have a fresh install of Centos 5.x and I'm having issues on setting up the network...i know i have to edit/etc/sysconfig/network-script/ifcfg-eth0 and create an ifcfg-eth0:0 right?im just having issues getting everything setup correctly.my network setup:Router IP: 192.168.2.1IPs on network: 192.168.2.xNetmask: 255.255.255.0
View 3 Replies View RelatedI have a temporary system up with wlan0 and eth2.
I want the eth0 address to be the gateway for accessing the internet on wlan0.
How do I setup static routes?
I'm not too keen with networking...
Code:
I have freshly installed RHEL 5.4 on a Dell Inspiron with WLAN adapter Broadcom 4318. The original driver bcm43xx did not work. So I installed ndiswrapper for using the windows driver.Now I can connect via DHCP, but when I try to assign a static IP address, it still uses the IP address provided by the router (AVM Fritzbox 7270). I always did ifdown/ifup and the static IP and everything else is present in /etc/sysconfig/network-scripts/ifcfg-eth1. But ifconfig always shows the IP address assigned by the router. When I switch off the DHCP server of the router I can't connect to the network anymore. The LAN adapter Broadcom 4400 is working well with a static IP address.
View 3 Replies View RelatedI have 4 debian boxes networked together through a basic 5 port switch. I am trying to simulate 2 Local Area Networks joined together by a WAN. Right now I can communicate with A <--> B, B<----> C, C<----->D. However, I cannot communicate with Host A to Host D which is the whole point of this experiment. It has to be my static routing is not right. This is a confusing area to me. Right now my routes are
[code]....
I am having several boxex with centos on it. No pb. I have recently setup a new box with centos 5.4 and I am not able to get the network working on it when configuring a static ip.I've configured eth0 and dns using "setup": unsuccessfulI've used the network config GUI: unsuccessfulAnd it is working very well when I let the dhcp getting the setting.I need a static IP.Here is the getinfo output when static ip setup, and below it, the getinfo for dhcp setting
== BEGIN uname -rmi ==
2.6.18-194.3.1.el5 i686 i386
== END uname -rmi ==
[code]....
I'm not able to set up eth0 with a static ip adress.service network restart and it was okkay but when I try to turn off and turn on, the ip adress is set up with dhcp.
View 7 Replies View RelatedI m trying to use static ip address on debian. I followed a tutorial and I modified the /etc/networking/interfaces but every time I reboot I can't do anything because the nm-applet says that I have select a manually connection..
View 1 Replies View Relatedyesterday i set my thinkpad t43p up with open suse, but i need to install my wlan...
i can't find the 12key big no to connect to my DSL telephone connection...
I use network manager applet 0.7.1. I had set the automatic wireless connection to my my wireless network (WPA key secured). Recently, I get the following problem: At the automatic connection, I get the message: Network manager applet (/usr/bin/mn-applet) needs default keyering. As I don't know what it is to type it and then, deny or OK, it doesn't get connected to my wireless network.
View 5 Replies View RelatedProblem to setup static IP
Host - Fedora 12 64bit
KVM - virtualization software
VM04 - Fedora 12 64bit
[code]....
I have setup like instructed in online tutorials.
Here is a copy of my interfaces file:
Code:
Code:
I got this message on Friday from just one domain. uote:mailsrv.forthnet.gr #<mailsrv.forthnet.gr #5.5.0 smtp; 554 5.5.0 Your message was considered to be spam by the FORTHnet Antispamming Policy and was not delivered to the recipient. The following spam tests returned positive for this message:FORGED_RCVD_HELO,RCVD_IN_BRBL. For further information visitWe are not a spamming community but it seems we have a statice IP address that has a Reverse lookup to "myipaddress.static.lyse.net" and not my email domain. Would setting a cname mail.mydomain.no -> myipaddress.static.lyse.net cure this problem or are there more tricks to be performedOnce I have cured the FORGED_RCVD_HELO I can move to getting the IP removed from BARACUDA.
View 2 Replies View RelatedI setup a server last night and was able to remotely connect to it and access the internet with it. However, now that I have setup /etc/network/interfaces so that the server will have a static IP address, I cannot access the server remotely. Also, from the server itself, I cannot access the internet. Ping provides "unkown host" for any website I try. How do I fix this?! I don't know why this is happening.
Here is my interfaces file:
Code: ...
#The primary network interface
allow-hotplug eth0
# also tried with and without auto eth0
# auto eth0
iface eth0 inet static
address 192.168.133
netmask 225.225.225.0
gateway 192.168.1.1 This is the only NIC on the server.
Here is ifconfig:
Code: eth0
Link encap:Ethernet HWaddr xx:xx:xx:xx:xx:xx
inet addr: 192.168.1.133 Bcast:192.168.1.225 Mask:225.225.225.0
UP BROACAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txpueuelen:1000
RX bytes:0 (0.0 B) TX bytes: 0 (0.0 B)
Interupt: 29
I imagine that there is already a thread for setting up a static IP, but I haven't been able to find it yet, so here we go.I have recently installed Fedora 15 on home machine. I have a very simple home network. Belkin wireless router with Window and Linux systems. The router is setup to be DHCP server. Router is setup to have lease time = Forever. Even with this setup, my router is assigning different IP address for my linux machine every time I boot the machine. So I would like to setup a static IP on my Linux.From my research so far, I'm suppose to make some changes to the file /etc/sysconfig/network-scripts/ifcfg-eth0. But I don't have this file in this folder. Should I just create this fil
View 3 Replies View Relatedhow to setup persistent static routes in slackware? does slackware have some text file editing method like debian or redhat. ?
View 5 Replies View RelatedI would like to set-up a pretty fast a running apache. I would like to use him so to launch a pretty small web site of 10 static html pages. At this time there is no security concerns (even though I want to do it right) , because the computer has not even ethernet cable. I have some experience, 8 years ago I Was setting up virtual hosts in fedora, so this process is not a blackbox for me.
View 9 Replies View RelatedThere is no wlan0 interface when trying to run FRITZ!WLAN USB Stick N 2.4 on OpenSuSE 11.2, though it works fine on Fedora 11 and Mandriva Spring 2009.1. All 64bit. Contrary to Fedora and Mandriva, there is no need to compile the compat-wireless module ar9170usb for OpenSuSE 11.2 because the kernel is very recent and includes this driver. Kernel: 2.6.31.5-0.1-desktop The /var/log/messages gives this after I put the stick in the PC. At first it is seen as a mass storage device:
Nov 27 22:00:24 linux-3mwa kernel: [ 73.420755] usb 1-5.1: new high speed USB device using ehci_hcd and address 4
Nov 27 22:00:24 linux-3mwa kernel: [ 73.540834] usb 1-5.1: New USB device found, idVendor=057c, idProduct=84ff
Nov 27 22:00:24 linux-3mwa kernel: [ 73.540841] usb 1-5.1: New USB device strings: Mfr=16, Product=32, SerialNumber=48
Nov 27 22:00:24 linux-3mwa kernel: [ 73.540847] usb 1-5.1: Product: FRITZ!WLAN USB Stick N 2.4
[Code]....
At my workplace the wireless connection is open but once you connect you first need to authenticate on your browser to be able to use the internet.On Windows as soon as I open whatever page I get the login request.On Linux I open firefox but nothing happens, just get the usual error page like if I had no connection. The IP's I get as well as DNS seem ok, I even tryed to match them up with windows.I tried a lot but can't get to the login page.
View 3 Replies View Relatedspecific Ubuntu supported WLAN PCI-cards? This link shows a list of supported PCI-cards, but which is best: [URL] And the installation needs to be easy! I�ve tried installing these PCI-cards in my computer, useing Linux drivers, NdisWrapper, etc. Unforutately without any success:
- DWL-G510, Ralink Chipset, Ralink RT2561/RT61
- Realtek Semiconductor, RTL-8185 IEEE 802.11a/b/g Wireless LAN Controller
Today I upgraded from 10.10 to 11.04. After accidentally turning off the computer during the upgrade, booting into recovery mode, remounting the file system as writable and finishing the upgrade, it worked just fine.
However, I can no longer use any wireless networks. Wired ethernet works fine, but the wireless inteface won't even show up when I run ifconfig. When I first installed 10.10, it worked instantly and I was able to use it during installation.
I have an HP Compaq nx7300 laptop with a Broadcom BCM4311 network card.
I installed 11.04 to ASUS Z9200 Notebook, at first all was fine at least 10 minutes, LAN, WLAN worked ok, but suddenly all is gone, restarted few times -nothing. reintall-nothing...here is some info....any ideas?
mm@mm:~$ sudo lshw -c network
[sudo] password for mm:
*-network:0 DISABLED
description: Ethernet interface
product: 88E8001 Gigabit Ethernet Controller
vendor: Marvell Technology Group Ltd.
physical id: 0
[Code]...
I'd like to have a set up where my Ethernet card has a static IP set up but my WiFi card doesn't.Currently I have a profile for this set up in Network Manager, however on boot up and every time I replug the cable Network Manager chooses the default "auto eth1" profile. I manually have tochoose my own profile for the Ethernet card every time. How can I make it default??I know the workaround would be to use ifup but then I lose the ability to quickly change access points for my WiFi card so that's not a solution for me
View 9 Replies View RelatedI have a Thinkpad T400 notebook that dual boots windows 7 and Ubuntu 9.04. My wireless has worked both in windows and ubuntu for the past several months. However 2 days ago, the wireless in ubuntu stopped working. I think this may be a result of trying to set up a static eth0 connection between my laptop and an embedded board, but I dont see how messing with eth0 would stop the wlan from working.
Symptoms: When I left click on the network connections icon in the tray, all it lists under "Wireless networks" is "device not ready". Needless to say, there are no networks available to connect to. Also the wireless is working fine under windows.
[Code]...
I have bought a new laptop with win7 on it , I delete win7 and install ubuntu64 everything is ok but my wireless card won't work ( it is recognized) and even I can connect to INTERNET but nothing is download or upload so I have bought another usb wireless card but now when I connect this new card to my laptop it still tries to use the old one and so I could not connect to internet
View 4 Replies View RelatedI am trying to connect to a WEP encrypted WLAN without using the DHCP server of the AP. (=giving myself a static IP)
So far i have tried:
Code:
But i cant even ping 192.168.1.1 (Network unreachable error). Is it possible that Ubuntu tries to use eth0 (which was connected to a similar /16 before) to ping 192.168.1.1 or is there somethign wrong with my commands?
Also will an AP allow access to the network although i don't have an IP from its DHCP server?
I can connect my wlan card to router (gateway) ,but I can't go to internet, pinging my router (and everything else) also falied. Same problem was with knoppix but with help of others i solved it modifing etc/reslove.conf IP address to my gateway (nameserver). At ubuntu resolve.conf seems ok, as there is already IP address of my gateway?
View 6 Replies View Related