General :: Setup Static Ip Address Via Terminal?
Jul 12, 2011
I imagine that there is already a thread for setting up a static IP, but I haven't been able to find it yet, so here we go.I have recently installed Fedora 15 on home machine. I have a very simple home network. Belkin wireless router with Window and Linux systems. The router is setup to be DHCP server. Router is setup to have lease time = Forever. Even with this setup, my router is assigning different IP address for my linux machine every time I boot the machine. So I would like to setup a static IP on my Linux.From my research so far, I'm suppose to make some changes to the file /etc/sysconfig/network-scripts/ifcfg-eth0. But I don't have this file in this folder. Should I just create this fil
View 3 Replies
ADVERTISEMENT
Dec 16, 2010
Version 10.04 LTS. Installed desktop version and network worked but I needed a static IP address and the install configures for a DHCP configured address. I tried changing to static address using the System->Preferences->Network Connections application but was unable to get the system to come up with the network up.
So I manually modified the /etc/network/interfaces and the /etc/resolv.conf files. I restart the system but when I do an ifconfig, I don't see a configured IP address on eth0 (only the loopback address). If I run /sbin/ifup eth0 everything then works fine and ifconfig shows the correct address bound to eth0.
My files are as follows:
View 2 Replies
View Related
Mar 16, 2011
Ubuntu was a good choice for free server O/S. I am currently downloading it. My ISP wants to bind my static IP to a MAC address of the device that will be making my connection for me. Should my server be behind my router or in front of it? I kinda wanted it to be the access point and be able to monitor the usage from all the terminals in my house. We have 4 other PC's, a laptop and a PS3. My server is a Acer Altos G530 with 3.2 Xeon Processor, 4 gb of ECC DDR,
View 7 Replies
View Related
Sep 4, 2010
I am trying to point my domain to my server with a static IP address. My domain is registered with Network Solutions and they ask "Primary and Secondary DNS" settings in their setup. What primary and secondary DNS settings I need to give when I have a dedicated server with static single IP address with BIND installed.
View 1 Replies
View Related
Apr 26, 2010
I got this message on Friday from just one domain. uote:mailsrv.forthnet.gr #<mailsrv.forthnet.gr #5.5.0 smtp; 554 5.5.0 Your message was considered to be spam by the FORTHnet Antispamming Policy and was not delivered to the recipient. The following spam tests returned positive for this message:FORGED_RCVD_HELO,RCVD_IN_BRBL. For further information visitWe are not a spamming community but it seems we have a statice IP address that has a Reverse lookup to "myipaddress.static.lyse.net" and not my email domain. Would setting a cname mail.mydomain.no -> myipaddress.static.lyse.net cure this problem or are there more tricks to be performedOnce I have cured the FORGED_RCVD_HELO I can move to getting the IP removed from BARACUDA.
View 2 Replies
View Related
Jan 28, 2011
where are the interface configurations (set by ifconfig, not the static ones) stored? I'm asking because I'm trying to understand, more broadly, the order of IP address lookup. If I ping the local machine (localhost, or one of the interfaces) no messages get sent out (at least according to wireshark), so some local lookup must be taking place.
View 1 Replies
View Related
Mar 11, 2010
For monitoring a network [LAN] I need a single C/C++ program using unix commands to retrieve the username, associated static IP address, what time user logged in, log out, total time system used by user. so that if a system has several users who used it @ different times of the day... then i need details of all users me,time of log in, static IP &all
View 1 Replies
View Related
Aug 3, 2010
I am struggling with what might be a minor problem. I have a home computer which I would like to setup as a webserver and hence give it a static IP address. It is connected to by wire to a router that is connected to the WAN via PPPOE. If I enable the network card on DHCP it works fine in browsing the web. If I now set it to static IP address it does not brown. Essentially I use the command setup to run the static IP setup. I then set my IP address to 192.168.254.X , the subnet mask 255.255.255.0 and the default gateway to 192.168.254.1 (this is the router connected to the WAN). I am able to ping the router, however when I try and browse on static it does not work. Your help will be most appreciated as this has taken way too long to solve and I have Googled as much without success.
View 5 Replies
View Related
Jan 11, 2011
In Red Hat Linux GUI interface i know that under Network Configuration there is a DNS tab and there I want write my DNS IP address. Well I want to add DSN entries through command line. which file should I edit and write
Primary DNS:
Secondary DNS:
Teriary DNS:
View 8 Replies
View Related
Apr 20, 2010
I have been fiddling around with my ip address configuration using several sources, and this is what I have in the /etc/network/interfaces file:
auto lo
iface lo inet loopback
auto eth0
iface eth0 inet static
address 192.168.1.122
broadcast 255.255.255.255
netmask 255.255.255.0
network 192.168.1.0
gateway 192.168.1.254
Yet, this is what I have in the ifconfig after I restarted the computer:
[Code].....
Could there be any mistakes I have made in the file? Why is it that I seem to have set a static ip address here and is not working?
View 8 Replies
View Related
Mar 15, 2010
i have a ubuntu 9.10 server on a wlan behind a debian server/router/firewall.i have had dhcp assigning the ip address to the server and then accessing the server through a port forward that has been working okay.i want to assign a static ip address to the server so that i wont have to worry about checking that as i reboot the system and so forth.
View 10 Replies
View Related
Apr 3, 2011
I am trying to establish a static IP address using the instructions I found at:I cannot find this file in Fedora 14:Code:/etc/sysconfig/network-scripts/ifcfg-Auto_eth0
View 8 Replies
View Related
Apr 3, 2011
In Windows Server 2008, I can configure a static IP address with the following syntax:Code:
netsh interface ipv4 set address="Local Area Connection" source=stati.10.10.11 55.255.255.0 10.10.10.1Besides editing a text file, is there a syntax I can run from terminal?
View 1 Replies
View Related
Jun 13, 2010
I want to assign a static ip address, my network/interfaces files shows
Code:
auto lo
iface lo inet loopback
am I correct to add
Code:
iface eth0 inet static
address 10.42.43.10
netmask 255.255.252.0
gateway 10.42.43.1
or is there more I need?
View 4 Replies
View Related
Mar 21, 2011
I am trying to set up a static ip address. I am using the visual interface. The problem may be that I don't know what they mean by "DNS servers" the linksys says it is 0.0.0.0 but entering that doesn't help. It says "connected" on the "notification area" icon, but I have no internet. I have rebooted the computer and the router.I deleted Auto eth0 and when I added a new connection it is now "Wired connection 1". If I change it to "automatic DHCP" instead of manual, it works fine.What am I missing, I have easily been able to set static IPs on WinXP machines, I would think Ubuntu would be easier.
View 4 Replies
View Related
Oct 29, 2009
I cannot get a static IP to work on Fedora 11. Using Network Manager, I set the IP to 192.168.1.130, the subnet mask to 255.255.255.0 and the gateway to 192.168.1.0 but it doesn't work. I also tried 192.168.1.1 for the gateway, which is what I used in FC7 but still no luck. I verified that these are the settings that I used in FC7, I don't remember ever having a problem before with this.I do remember someone telling me not to use Network Manager in conjunction with Network Configuration... does that make sense? That was for FC9 on my laptop and it was for the wireless so perhaps that doesn't apply here. I did try unchecking the box for Network Manager and using strictly Network Configuration but it still didn't work.
View 10 Replies
View Related
Apr 11, 2010
I have followed some instructions to change to a static ip address and have now lost my connection to my router. The mistake I made was not copying the original "interfaces" file before making changes.The file originally had: auto wlan0 iface wlan0 inet (something - I thought it was loopback but didn't work when I added it).
The instruction told me to put:
auto eth0
iface eth0 inet static
address 192.168.1.100
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1
Which I did, using my own ip numbers, except for "broadcast". I didn't add that in because I didn't have a clue what to put there. When it didn't work, I tried putting it back to what I originally had except I can't rememebr that last bit. I added dhcp instead of what I thought it was but this didn't work either.
View 9 Replies
View Related
May 17, 2010
I just upgraded to 10.04 and I want to set the static ip address but I can't find where to do it.
View 2 Replies
View Related
Mar 7, 2011
Im running ubuntu server 10.10 on my wirtual mashine at home. For now i have few service installed and configured:apache with phpand mysql support,ftp,phpmyadmin.. My ip address is not static, i tryed to configure by following some guide but without success.
First i edit this in /etc/network/interfaces (changing dhcp to static
Code:
# The primary network interface
auto eth0
iface eth0 inet static
[Code].....
View 9 Replies
View Related
Aug 2, 2011
I'm using a 3G+ stick, by Sfr in France.
Is it possible to get a static local ip address ?
I wasn't able to find the answer with google.
View 3 Replies
View Related
Jan 16, 2010
Can't change from dhcp to static ip address.I've installed Oracle's version of Linux Redhat 5, but I'm having no success changing from dhcp to a static IP address. My machine is plugged directly into a Belkin router which has the IP address: 192.168.2.1.If I use the gui: /usr/bin/system-config-network and set the network device to dhcp,it works fine. But if I set the IP address manually, I get no internet traffic, and if I ping an internet website, "network unreachable".The installation instructions for Oracle say that they want a full domainname. I've tried gateway.2wire.net. This worked in the last place I did a successful installation.It was the address of my ATT router. If I plunked that into a browser, I got the router configuration.
View 7 Replies
View Related
May 19, 2009
I am running 2.6.27.21:170.256.fc10.i686 on my laptop.
I am trying to connect to a network at a university in China right now and I cannot figure out how to connect.
IP: 192.168.213.179
subnet mask: 255.255.255.0
default gateway: 192.168.213.1
DNS: 202.202.96.33
DNS: 61.128.128.74
View 5 Replies
View Related
Apr 18, 2010
My new line provider/ISP won't give me a static IP address - it's DHCP or nothing. Is there some trick I can use to allow myself to host a web page? I was thinking of getting a static address elsewhere, like at my sometime place of employment, and redirecting, but it just moves the problem downstream.Realistically, assume I leave my computer on and hardly ever reboot (CentOS is pretty stable), then will I typically keepthe same address for weeks or months at a time? If so, I could live with logging in to my registrar a few times a year to change the address, as bizarre as that would be
View 5 Replies
View Related
Mar 31, 2010
when I do "route -n", I got:
Code:
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0
169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth0
127.0.0.0 0.0.0.0 255.0.0.0 U 0 0 0 lo
0.0.0.0 192.168.1.1 0.0.0.0 UG 0 0 0 eth0
I need to change the static configuration, like I 169.254.0.0, I don't know how it got there also I want to delete 192.168.1.1 from a static gateway. How can I do this?
View 2 Replies
View Related
Jul 31, 2010
I am trying to find out if it is possible for me to have a static ip address with my 3G usb modem ? I am using gnome network manager in Ubuntu 10.04 but it there is no option for me there for a static IPV4 address. I know with a wireless or ethernet connection you would modify /et/dhcp3/dhclient.conf and/or /etc/network/interfaces. I don't think those two would do for a PPP connection. When I go to /etc/ppp/ I see no .conf file that I could modify.
View 2 Replies
View Related
May 1, 2010
i am trying to assign a Static IP address and for the life of my i cannot get it to work Can someone explain to me the easiest way to do it and if i restart the server it won't get lost either.
View 1 Replies
View Related
Feb 17, 2009
I am a windows user with no linux experience prior to Friday. Im setting up a music server (SqueezeCenter) running Fedora 10.
With the help of posts of this site Ive made good progress with complicated stuffnamely getting Samba and VNC working. My Fedora machine and my windows machines now see each others shared files, and I can control my Fedora machine from my windows machine. (The Fedora machine will ultimately be headless.)
But Im having trouble with a seemingly simple issue setting up my Fedora box with a static IP address. With DHCP enabled on my network Ethernet adapter, all works fine. I then used the System>Administration>Network menu to disable DHCP and to assign the same IP address that DHCP chose. When I do this, two cases need to be distinguished:
1. If I keep the box checked for Controlled by Network Manager, the Network Manager Applet reports a network connection, I nevertheless cannot access the internet, but my Fedora machine is able to communicate with my Squeezebox music player (connected to my network via my DSL modem Ethernet connections, and with a fixed IP address). 2. If I uncheck the box Controlled by Network Manger, then the Network Manager Applet reports no network connection and my Fedora machine is not able to communicate with my Squeezebox music player (and I of course have no internet connectivity).
Ive seen references on other posts suggesting that the Network Manager service be disabled. But I see no way to manually configure the network.
View 4 Replies
View Related
May 1, 2010
I want to force my IP address to 192.169.0.99but my router always allocates me 192.168.0.2I have attached a screen showing my settings.I'm using the broadcom wireless card to connect to the router?Any thoughts, I have tried to change the setting with and without the network manager.
View 3 Replies
View Related
Feb 18, 2010
how I can define a local static IP address (so that I can run a web server off of the same IP, rather than letting my router DHCP it)?I've tried doing the YaST->Network Devices->Network Settings->Traditional Method with ifup->Set NIC to desired IP->Set Default Gateway to router address method, and afterwards I can't even get into my router anymore (not even responding to ping).
View 8 Replies
View Related
Oct 12, 2010
I have a problem with tightvnc, when I set up a dinamic ip with networkmanager it works fine but if I set up a static address connection it display an error "You have been unexpectedly disconnected from 'hometsa-comp'. Would you like to reconnect?"
"Couldn't convert 'hometsa-comp' to host address" I have setup the ip address, netmask, gateway and dns server in the network manager static address, it works when I setup the vnc connection using ip address instead of hostnames.
View 9 Replies
View Related
